- 01 Sep, 2020 4 commits
-
-
Sean Paul authored
Instead of hand rolling the transfer ourselves in the hdcp hook, inspect aux messages and add the aksv flag in the aux transfer hook. IIRC, this was the original implementation and folks wanted this hack to be isolated to the hdcp code, which makes sense. However in testing an LG monitor on my desk, I noticed it was passing back a DEFER reply. This wasn't handled in our hand-rolled code and HDCP auth was failing as a result. Instead of copy/pasting all of the retry logic and delays from drm dp helpers, let's just use the helpers and hide the aksv select as best as we can. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-3-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-5-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-5-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-5-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-5-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-5-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-5-sean@poorly.run #v7 Changes in v2: -Remove 'generate' in intel_dp_aux_generate_xfer_flags, make arg const (Ville) -Bundle Aksv if statement together (Ville) -Rename 'txbuf' to 'aksv' (Ville) Changes in v3: -None Changes in v4: -None Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by:
-
Sean Paul authored
HDCP signalling should not be left on, WARN if it is Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Sean Paul authored
On HDCP disable, clear the repeater bit. This ensures if we connect a non-repeater sink after a repeater, the bit is in the state we expect. Fixes: ee5e5e7a ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by:
-
Sean Paul authored
This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.17+ Reviewed-by:
-
- 31 Aug, 2020 1 commit
-
-
Lionel Landwerlin authored
I'll need this in IGT to identify the different kind of GTs and apply the right performance query configuration. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828133125.157171-1-lionel.g.landwerlin@intel.com
-
- 29 Aug, 2020 1 commit
-
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/i915/display/intel_combo_phy.c:268:3: warning: variable 'ret' is uninitialized when used here [-Wuninitialized] ret &= check_phy_reg(dev_priv, phy, ICL_PORT_TX_DW8_LN0(phy), ^~~ drivers/gpu/drm/i915/display/intel_combo_phy.c:261:10: note: initialize the variable 'ret' to silence this warning bool ret; ^ = 0 1 warning generated. In practice, the bug this warning appears to be concerned with would not actually matter because ret gets initialized to the return value of cnl_verify_procmon_ref_values. However, that does appear to be a bug since it means the first hunk of the patch this fixes won't actually do anything (since the values of check_phy_reg won't factor into the final ret value). Initialize ret to true then make all of the assignments a bitwise AND with itself so that the function always does what it should do. Fixes: 239bef67 ("drm/i915/display: Implement new combo phy initialization step") Link: https://github.com/ClangBuiltLinux/linux/issues/1094Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828202830.7165-1-jose.souza@intel.comSigned-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
- 28 Aug, 2020 4 commits
-
-
José Roberto de Souza authored
Update with latest tuning in the table. v3: Fix values of to last columns. BSpec: 21257 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is set as EHL combo phy supports HBR3 (Matt R) Reviewed-by:
-
José Roberto de Souza authored
Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table being used when the eDP port don't support low power voltage swing table. Reviewed-by:
-
José Roberto de Souza authored
TGL made stepping a litte mess, workarounds refer to the stepping of the IP(GT or Display) not of the GPU stepping so it would already require the same solution as used in commit 96c5a15f ("drm/i915/kbl: Fix revision ID checks"). But to make things even more messy it have a different IP stepping mapping between SKUs and the same stepping revision of GT do not match the same HW between TGL U/Y and regular TGL. So it was required to have 2 different macros to check GT WAs while for Display we are able to use just one macro that uses the right revids table. All TGL workarounds checked and updated accordingly. v2: - removed TODO to check if WA 14010919138 applies to regular TGL. - fixed display stepping in regular TGL (Anusha) BSpec: 52890 BSpec: 55378 BSpec: 44455 Reviewed-by:
Anusha Srivatsa <anusha.srivtsa@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Penne Lee <penne.y.lee@intel.com> Cc: Guangyao Bai <guangyao.bai@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 27 Aug, 2020 4 commits
-
-
José Roberto de Souza authored
Supported and enabled are different things so printing both. v3: using drrs->type instead of vbt.drrs_type Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Changes in the configuration could cause PSR to be compatible and enabled so driver must also be able to disable DRRS when doing fastsets. v2: Fixed name of DRRS compute function (Anshuman) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/173 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
José Roberto de Souza authored
DRRS and PSR can't be enable together, so giving preference to PSR as it allows more power-savings by complete shutting down display, so to guarantee this, it should compute DRRS state after compute PSR. Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a drm_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 26 Aug, 2020 3 commits
-
-
Clint Taylor authored
Enable HW Default flip for small PL. bspec: 52890 bspec: 53508 bspec: 53273 v2: rebase to drm-tip v3: move from ctx to gt workarounds. Remove whitelist. v4: move to rcs WA init Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by:
-
Anshuman Gupta authored
HDCP code doesn't require to access power_well internal stuff, instead it should use the intel_display_power_well_is_enabled() to get the status of desired power_well. No functional change. v2: - used with_intel_runtime_pm instead of get/put. [Jani] v3: - rebased. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Anshuman Gupta authored
Currently intel_hdcp_update_pipe() is also getting called for non-hdcp connectors and get through its conditional code flow, which is completely unnecessary for non-hdcp connectors, therefore it make sense to have an early return. No functional change. v2: - rebased. Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
- 24 Aug, 2020 1 commit
-
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 21 Aug, 2020 1 commit
-
-
Mika Kuoppala authored
Our variety of defined gpu commands have the actual command id field and possibly length and flags applied. We did start to apply the mask during initialization of the cmd descriptors but forgot to also apply it on comparisons. Fix comparisons in order to properly deny access with associated commands. v2: fix lri with correct mask (Chris) References: 926abff2 ("drm/i915/cmdparser: Ignore Length operands during command matching") Reported-by:
Nicolai Stange <nstange@suse.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Miroslav Benes <mbenes@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
-
- 19 Aug, 2020 1 commit
-
-
Matt Atwood authored
Add minimum width to planes, variable with specific formats for gen11+ to reflect recent bspec changes. Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by:
-
- 17 Aug, 2020 20 commits
-
-
José Roberto de Souza authored
Major upgrade of HuC firmware with fixes and new features. Signed-off-by:
-
José Roberto de Souza authored
Fixes around DC5, DC6 and DC3CO in those new firmwares. Signed-off-by:
-
José Roberto de Souza authored
From the 3 WAs for PSR2 man track/selective fetch this is only one needed when doing single full frames at every flip. Reviewed-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
-
José Roberto de Souza authored
All GEN12 platforms supports PSR2 selective fetch but not all GEN12 platforms supports PSR2 hardware tracking(aka RKL). This feature consists in software programming registers with the damaged area of each plane this way hardware will only fetch from memory those areas and sent the PSR2 selective update blocks to panel, saving even more power. But as initial step it is only enabling the full frame fetch at every flip, the actual selective fetch part will come in a future patch. Also this is only handling the page flip side, it is still completely missing frontbuffer modifications, that is why the enable_psr2_sel_fetch parameter was added. v3: - calling intel_psr2_sel_fetch_update() during the atomic check phase (Ville) BSpec: 55229 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Matt Roper authored
We usually assume that increasing PCI device revision ID's translates to newer steppings; macros like IS_KBL_REVID() that we use rely on this behavior. Unfortunately this turns out to not be true on KBL; the newer device 2 revision ID's sometimes go backward to older steppings. The situation is further complicated by different GT and display steppings associated with each revision ID. Let's work around this by providing a table to map the revision ID to specific GT and display steppings, and then perform our comparisons on the mapped values. v2: - Move the kbl_revids[] array to intel_workarounds.c to avoid compiler warnings about an unused variable in files that don't call the macros (kernel test robot). Bspec: 18329 Signed-off-by:
Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This new HBR2 table for TGL-U and TGL-Y is required to pass DisplayPort compliance. BSpec: 49291 Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Reviewed-by: Khaled Almahallawy<khaled.almahallawy@intel.com> Signed-off-by:
-
José Roberto de Souza authored
There is no way to differentiate TGL-U from TGL-Y by the PCI ids as some ids are available in both SKUs. So here using the root device id in the PCI bus that iGPU is in to differentiate between U and Y. BSpec: 44455 Reviewed-by:
-
Imre Deak authored
The command register is the PCODE MBOX low register not the high one as described by the spec. This left the system with the TC-cold power state being blocked all the time. Fix things by using the correct register. Also to make sure we retry a request for at least 600usec, when the PCODE MBOX command itself succeeded, but the TC-cold block command failed, sleep for 1msec unconditionally after any fail. The change was tested with JTAG register read of the HW/FW's actual TC-cold state, which reported the expected states after this change. Tested-by:
Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
The dependency between power wells is determined by the ordering of the power well list: when enabling the power wells for a domain, this happens walking the power well list forward, while disabling them happens in the reverse direction. Accordingly a power well on the list must follow any other power well it depends on. Since the TC AUX power wells depend on TC-cold being blocked, move the TC-cold off power well before all AUX power wells. Fixes: 3c02934b ("drm/i915/tc/tgl: Implement TC cold sequences") Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
George Spelvin authored
igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number s>>12. Once in 2 million seeds, this is zero and ilog2 summons the nasal demons. There was an attempt to handle this case with a max(), but that's too late; ms could already be something bizarre. Given that the low 12 bits of s and ms are always zero, it's a lot simpler just to divide them by 4096, then everything fits into 32 bits, and we can easily generate a random number 1 <= s <= 0x1fffff. Fixes: 14d1b9a6 ("drm/i915: buddy allocator") Signed-off-by:
George Spelvin <lkml@sdf.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
-
Lionel Landwerlin authored
Introduces a new parameters to execbuf so that we can specify syncobj handles as well as timeline points. v2: Reuse i915_user_extension_fn v3: Check that the chained extension is only present once (Chris) v4: Check that dma_fence_chain_find_seqno returns a non NULL fence (Lionel) v5: Use BIT_ULL (Chris) v6: Fix issue with already signaled timeline points, dma_fence_chain_find_seqno() setting fence to NULL (Chris) v7: Report ENOENT with invalid syncobj handle (Lionel) v8: Check for out of order timeline point insertion (Chris) v9: After explanations on https://lists.freedesktop.org/archives/dri-devel/2019-August/229287.html drop the ordering check from v8 (Lionel) v10: Set first extension enum item to 1 (Jason) v11: Rebase v12: Allow multiple extension nodes of timeline syncobj (Chris) Signed-off-by: -
Lionel Landwerlin authored
We're planning to use this for a couple of new feature where we need to provide additional parameters to execbuf. v2: Check for invalid flags in execbuffer2 (Lionel) v3: Rename I915_EXEC_EXT -> I915_EXEC_USE_EXTENSIONS (Chris) v4: Rebase Move array fence parsing in i915_gem_do_execbuffer() Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Matt Roper authored
The hardware team has dropped this workaround from the bspec; it is no longer needed. This reverts commit 111822b21be995a3a4a731066db3d820523c57f7. Bspec: 49291 Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Tianjia Zhang authored
In the case of calling check_digital_port_conflicts() failed, a negative error code -EINVAL should be returned. Fixes: bf5da83e ("drm/i915: Move check_digital_port_conflicts() earier") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by:
-
Tianjia Zhang authored
In function i915_active_acquire_preallocate_barrier(), not all paths have the return value set correctly, and in case of memory allocation failure, a negative error code should be returned. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Matt Roper authored
A recent bspec update removed the LPDDR4 single channel entry from the buddy register table, but added a new four-channel entry. Workaround 1409767108 hasn't been updated with any guidance for four channel configurations, so we leave that alternate table unchanged for now. Bspec 49218 Fixes: 3fa01d64 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
We use i915_active_fini() as a debug check on the i915_active state before freeing. If we forget to call it, we may end up angering the debugobjects contained within. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-1-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
Avoid a GPF at <1>[ 20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c <1>[ 20.177322] #PF: supervisor read access in kernel mode <1>[ 20.177323] #PF: error_code(0x0000) - not-present page <6>[ 20.177324] PGD 0 P4D 0 <4>[ 20.177327] Oops: 0000 [#1] PREEMPT SMP PTI <4>[ 20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1 <4>[ 20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018 <4>[ 20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915] <4>[ 20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74 <4>[ 20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246 <4>[ 20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000 <4>[ 20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30 <4>[ 20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 <4>[ 20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08 <4>[ 20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30 <4>[ 20.177383] FS: 00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000 <4>[ 20.177384] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0 <4>[ 20.177386] Call Trace: <4>[ 20.177390] seq_read+0xcb/0x420 which is presumably from having no encoder attached at that time. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175 Fixes: 8806211f ("drm/i915: Add i915_lpsp_capability debugfs") Signed-off-by:
-
Chris Wilson authored
It's been a while since gen6_rps_boost() [that only worked on gen6+] was replaced by intel_rps_boost() that understood itself when rps was active. Since the intel_rps_boost() is gen-agnostic, just call it. Signed-off-by:
-
Chris Wilson authored
Since we want to read the values from the HWSP as written to by the GPU, warn the compiler that the values are volatile. Signed-off-by:
-
