- 30 Sep, 2022 2 commits
-
-
Jens Axboe authored
* for-6.1/io_uring: (56 commits) io_uring/net: fix notif cqe reordering io_uring/net: don't update msg_name if not provided io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL io_uring/rw: defer fsnotify calls to task context io_uring/net: fix fast_iov assignment in io_setup_async_msg() io_uring/net: fix non-zc send with address io_uring/net: don't skip notifs for failed requests io_uring/rw: don't lose short results on io_setup_async_rw() io_uring/rw: fix unexpected link breakage io_uring/net: fix cleanup double free free_iov init io_uring: fix CQE reordering io_uring/net: fix UAF in io_sendrecv_fail() selftest/net: adjust io_uring sendzc notif handling io_uring: ensure local task_work marks task as running io_uring/net: zerocopy sendmsg io_uring/net: combine fail handlers io_uring/net: rename io_sendzc() io_uring/net: support non-zerocopy sendto io_uring/net: refactor io_setup_async_addr io_uring/net: don't lose partial send_zc on fail ...
-
Jens Axboe authored
* for-6.1/block: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ... Signed-off-by:Jens Axboe <axboe@kernel.dk>
-
- 29 Sep, 2022 9 commits
-
-
Hugh Dickins authored
Commit 4acb8341 ("sbitmap: fix batched wait_cnt accounting") is a big improvement: without it, I had to revert to before commit 040b83fc ("sbitmap: fix possible io hung due to lost wakeup") to avoid the high system time and freezes which that had introduced. Now okay on the NVME laptop, but 4acb8341 is a disaster for heavy swapping (kernel builds in low memory) on another: soon locking up in sbitmap_queue_wake_up() (into which __sbq_wake_up() is inlined), cycling around with waitqueue_active() but wait_cnt 0 . Here is a backtrace, showing the common pattern of outer sbitmap_queue_wake_up() interrupted before setting wait_cnt 0 back to wake_batch (in some cases other CPUs are idle, in other cases they're spinning for a lock in dd_bio_merge()): sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag < __blk_mq_free_request < blk_mq_free_request < __blk_mq_end_request < scsi_end_request < scsi_io_completion < scsi_finish_command < scsi_complete < blk_complete_reqs < blk_done_softirq < __do_softirq < __irq_exit_rcu < irq_exit_rcu < common_interrupt < asm_common_interrupt < _raw_spin_unlock_irqrestore < __wake_up_common_lock < __wake_up < sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag < __blk_mq_free_request < blk_mq_free_request < dd_bio_merge < blk_mq_sched_bio_merge < blk_mq_attempt_bio_merge < blk_mq_submit_bio < __submit_bio < submit_bio_noacct_nocheck < submit_bio_noacct < submit_bio < __swap_writepage < swap_writepage < pageout < shrink_folio_list < evict_folios < lru_gen_shrink_lruvec < shrink_lruvec < shrink_node < do_try_to_free_pages < try_to_free_pages < __alloc_pages_slowpath < __alloc_pages < folio_alloc < vma_alloc_folio < do_anonymous_page < __handle_mm_fault < handle_mm_fault < do_user_addr_fault < exc_page_fault < asm_exc_page_fault See how the process-context sbitmap_queue_wake_up() has been interrupted, after bringing wait_cnt down to 0 (and in this example, after doing its wakeups), before advancing wake_index and refilling wake_cnt: an interrupt-context sbitmap_queue_wake_up() of the same sbq gets stuck. I have almost no grasp of all the possible sbitmap races, and their consequences: but __sbq_wake_up() can do nothing useful while wait_cnt 0, so it is better if sbq_wake_ptr() skips on to the next ws in that case: which fixes the lockup and shows no adverse consequence for me. The check for wait_cnt being 0 is obviously racy, and ultimately can lead to lost wakeups: for example, when there is only a single waitqueue with waiters. However, lost wakeups are unlikely to matter in these cases, and a proper fix requires redesign (and benchmarking) of the batched wakeup code: so let's plug the hole with this bandaid for now. Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/9c2038a7-cdc5-5ee-854c-fbc6168bf16@google.comSigned-off-by:
-
Pavel Begunkov authored
send zc is not restricted to !IO_URING_F_UNLOCKED anymore and so we can't use task-tw ordering trick to order notification cqes with requests completions. In this case leave it alone and let io_send_zc_cleanup() flush it. Cc: stable@vger.kernel.org Fixes: 53bdc88a ("io_uring/notif: order notif vs send CQEs") Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0031f3a00d492e814a4a0935a2029a46d9c9ba06.1664486545.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
io_sendmsg_copy_hdr() may clear msg->msg_name if the userspace didn't provide it, we should retain NULL in this case. Cc: stable@vger.kernel.org Signed-off-by:
-
Jens Axboe authored
This isn't a reliable mechanism to tell if we have task_work pending, we really should be looking at whether we have any items queued. This is problematic if forward progress is gated on running said task_work. One such example is reading from a pipe, where the write side has been closed right before the read is started. The fput() of the file queues TWA_RESUME task_work, and we need that task_work to be run before ->release() is called for the pipe. If ->release() isn't called, then the read will sit forever waiting on data that will never arise. Fix this by io_run_task_work() so it checks if we have task_work pending rather than rely on TIF_NOTIFY_SIGNAL for that. The latter obviously doesn't work for task_work that is queued without TWA_SIGNAL. Reported-by:
Christiano Haesbaert <haesbaert@haesbaert.org> Cc: stable@vger.kernel.org Link: https://github.com/axboe/liburing/issues/665Signed-off-by:
-
Jens Axboe authored
We can't call these off the kiocb completion as that might be off soft/hard irq context. Defer the calls to when we process the task_work for this request. That avoids valid complaints like: stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.0.0-rc6-syzkaller-00321-g105a36f3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_usage_bug kernel/locking/lockdep.c:3961 [inline] valid_state kernel/locking/lockdep.c:3973 [inline] mark_lock_irq kernel/locking/lockdep.c:4176 [inline] mark_lock.part.0.cold+0x18/0xd8 kernel/locking/lockdep.c:4632 mark_lock kernel/locking/lockdep.c:4596 [inline] mark_usage kernel/locking/lockdep.c:4527 [inline] __lock_acquire+0x11d9/0x56d0 kernel/locking/lockdep.c:5007 lock_acquire kernel/locking/lockdep.c:5666 [inline] lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631 __fs_reclaim_acquire mm/page_alloc.c:4674 [inline] fs_reclaim_acquire+0x115/0x160 mm/page_alloc.c:4688 might_alloc include/linux/sched/mm.h:271 [inline] slab_pre_alloc_hook mm/slab.h:700 [inline] slab_alloc mm/slab.c:3278 [inline] __kmem_cache_alloc_lru mm/slab.c:3471 [inline] kmem_cache_alloc+0x39/0x520 mm/slab.c:3491 fanotify_alloc_fid_event fs/notify/fanotify/fanotify.c:580 [inline] fanotify_alloc_event fs/notify/fanotify/fanotify.c:813 [inline] fanotify_handle_event+0x1130/0x3f40 fs/notify/fanotify/fanotify.c:948 send_to_group fs/notify/fsnotify.c:360 [inline] fsnotify+0xafb/0x1680 fs/notify/fsnotify.c:570 __fsnotify_parent+0x62f/0xa60 fs/notify/fsnotify.c:230 fsnotify_parent include/linux/fsnotify.h:77 [inline] fsnotify_file include/linux/fsnotify.h:99 [inline] fsnotify_access include/linux/fsnotify.h:309 [inline] __io_complete_rw_common+0x485/0x720 io_uring/rw.c:195 io_complete_rw+0x1a/0x1f0 io_uring/rw.c:228 iomap_dio_complete_work fs/iomap/direct-io.c:144 [inline] iomap_dio_bio_end_io+0x438/0x5e0 fs/iomap/direct-io.c:178 bio_endio+0x5f9/0x780 block/bio.c:1564 req_bio_endio block/blk-mq.c:695 [inline] blk_update_request+0x3fc/0x1300 block/blk-mq.c:825 scsi_end_request+0x7a/0x9a0 drivers/scsi/scsi_lib.c:541 scsi_io_completion+0x173/0x1f70 drivers/scsi/scsi_lib.c:971 scsi_complete+0x122/0x3b0 drivers/scsi/scsi_lib.c:1438 blk_complete_reqs+0xad/0xe0 block/blk-mq.c:1022 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 common_interrupt+0xa9/0xc0 arch/x86/kernel/irq.c:240 Fixes: f63cf519 ("io_uring: ensure that fsnotify is always called") Link: https://lore.kernel.org/all/20220929135627.ykivmdks2w5vzrwg@quack3/ Reported-by: syzbot+dfcc5f4da15868df7d4d@syzkaller.appspotmail.com Reported-by:
-
Pankaj Raghav authored
There are two places in the block layer at the moment where blk_mq_plug() helper could be used instead of directly accessing the plug from struct current. In both these cases, directly accessing the plug should not have any consequences for zoned devices. Make the intent explicit by adding comments instead of introducing unwanted checks with blk_mq_plug() helper.[1] [1] https://lore.kernel.org/linux-block/f6e54907-1035-2b2c-6387-ed178be05ccb@kernel.dk/Signed-off-by:
Pankaj Raghav <p.raghav@samsung.com> Suggested-by:
-
Pankaj Raghav authored
The current implementation of blk_mq_plug() disables plugging for all operations that involves a transfer to the device as we just check if the last bit in op_is_write() function. Modify blk_mq_plug() to disable plugging only for REQ_OP_WRITE and REQ_OP_WRITE_ZEROS as they might require a zone lock. Suggested-by:
Christoph Hellwig <hch@lst.de> Suggested-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220929074745.103073-2-p.raghav@samsung.comSigned-off-by:
-
Stefan Metzmacher authored
I hit a very bad problem during my tests of SENDMSG_ZC. BUG(); in first_iovec_segment() triggered very easily. The problem was io_setup_async_msg() in the partial retry case, which seems to happen more often with _ZC. iov_iter_iovec_advance() may change i->iov in order to have i->iov_offset being only relative to the first element. Which means kmsg->msg.msg_iter.iov is no longer the same as kmsg->fast_iov. But this would rewind the copy to be the start of async_msg->fast_iov, which means the internal state of sync_msg->msg.msg_iter is inconsitent. I tested with 5 vectors with length like this 4, 0, 64, 20, 8388608 and got a short writes with: - ret=2675244 min_ret=8388692 => remaining 5713448 sr->done_io=2675244 - ret=-EAGAIN => io_uring_poll_arm - ret=4911225 min_ret=5713448 => remaining 802223 sr->done_io=7586469 - ret=-EAGAIN => io_uring_poll_arm - ret=802223 min_ret=802223 => res=8388692 While this was easily triggered with SENDMSG_ZC (queued for 6.1), it was a potential problem starting with 7ba89d2a in 5.18 for IORING_OP_RECVMSG. And also with 4c3c0943 in 5.19 for IORING_OP_SENDMSG. However 257e84a5 introduced the critical code into io_setup_async_msg() in 5.11. Fixes: 7ba89d2a ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly") Fixes: 257e84a5 ("io_uring: refactor sendmsg/recvmsg iov managing") Cc: stable@vger.kernel.org Signed-off-by:
Stefan Metzmacher <metze@samba.org> Reviewed-by:
-
Pavel Begunkov authored
We're currently ignoring the dest address with non-zerocopy send because even though we copy it from the userspace shortly after ->msg_name gets zeroed. Move msghdr init earlier. Fixes: 516e82f0 ("io_uring/net: support non-zerocopy sendto") Signed-off-by:
-
- 28 Sep, 2022 3 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 6.1 - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)" * tag 'nvme-6.1-2022-09-28' of git://git.infradead.org/nvme: (31 commits) nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data nvme-tcp: remove the unused queue_size member in nvme_tcp_queue nvme: add common helpers to allocate and free tagsets nvme-auth: add a MAINTAINERS entry nvmet: add helpers to set the result field for connect commands nvme: improve the NVME_CONNECT_AUTHREQ* definitions nvmet-auth: don't try to cancel a non-initialized work_struct nvmet-tcp: remove nvmet_tcp_finish_cmd ...
-
Christoph Hellwig authored
As far as I can tell there is no need for the staged setup in dasd, so allocate the tagset and the disk with the queue in dasd_gendisk_alloc. Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
-
Pavel Begunkov authored
We currently only add a notification CQE when the send succeded, i.e. cqe.res >= 0. However, it'd be more robust to do buffer notifications for failed requests as well in case drivers decide do something fanky. Always return a buffer notification after initial prep, don't hide it. This behaviour is better aligned with documentation and the patch also helps the userspace to respect it. Cc: stable@vger.kernel.org # 6.0 Suggested-by:
-
- 27 Sep, 2022 26 commits
-
-
Christoph Hellwig authored
blkg_conf_prep just creates a new blkg structure, there is no real need to update the lookup hint which should only be done on a successful lookup in the I/O path. Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
nvmet is a consumer of the block layer and should not directly look at the request_queue. Use the bdev_ helpers to retrieve the device limits instead. Signed-off-by:
-
Christoph Hellwig authored
nvmet is a consumer of the block layer and should not directly look at the request_queue. Just use the NUMA node ID from the gendisk instead of the request_queue. Signed-off-by:
-
Keith Busch authored
The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0 Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Replace blk_queue_nowait with a bdev_nowait helpers that takes the block_device given that the I/O submission path should not have to look into the request_queue. Signed-off-by:
-
Christoph Hellwig authored
Unused now. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com>
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_loop_ctrl. Signed-off-by:
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code. Signed-off-by:
-
Christoph Hellwig authored
Defer initializing the sqsize field from the options until it has been capped by MAXCMD. Signed-off-by:
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_fc_ctrl. Signed-off-by:
James Smart <jsmart2021@gmail.com>
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code and use the chance the cleanup the init_hctx methods a bit. Signed-off-by:
-
Christoph Hellwig authored
Also update the sqsize field when capping the queue size, and remove the check a queue size that is larger than sqsize given that sqsize is only initialized from opts->queue_size. Signed-off-by:
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_rdma_ctrl. Signed-off-by:
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code. Signed-off-by:
-
Christoph Hellwig authored
Use the common helpers to allocate and free the tagsets. To make this work the generic nvme_ctrl now needs to be stored in the hctx private data instead of the nvme_tcp_ctrl. Signed-off-by:
-
Christoph Hellwig authored
Point the private data to the generic controller structure in preparation of using the common tagset init/exit code. Signed-off-by:
-
Christoph Hellwig authored
->nvme_tcp_queue is not used anywhere, so remove it. Signed-off-by:
-
Christoph Hellwig authored
Add common helpers to allocate and tear down the admin and I/O tag sets, including the special queues allocated with them. Signed-off-by:
-
Christoph Hellwig authored
Add Hannes as the nvme-auth maintainer. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Christoph Hellwig authored
The code to set the result field for the admin and I/O connect commands is not only verbose and duplicated, but also violates the aliasing rules as it accesses both the u16 and u32 members in the union. Add a little helper to sort all that out. Fixes: db1312dd ("nvmet: implement basic In-Band Authentication") Signed-off-by:
-
Christoph Hellwig authored
Mark them as unsigned so that we don't need extra casts, and define them relative to cdword0 instead of requiring extra shifts. Signed-off-by:
-
Christoph Hellwig authored
Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is enabled, but authentication is not on a queue. This is because nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while auth_expired_work is only ever initialized if authentication is enabled for a given controller. Fix this by calling most of what is nvmet_init_auth unconditionally when initializing the SQ, and just do the setting of the result field in the connect command handler. Fixes: db1312dd ("nvmet: implement basic In-Band Authentication") Signed-off-by:
-
zhenwei pi authored
There is only a single call-site of nvmet_tcp_finish_cmd(), this becomes redundant. Remove nvmet_tcp_finish_cmd() and use the original function body instead. Suggested-by:
zhenwei pi <pizhenwei@bytedance.com> Reviewed-by:
-
Varun Prakash authored
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(), add a bounds check to avoid out-of-bounds access. Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
-
Varun Prakash authored
As per NVMe/TCP transport specification ICReq PDU is the first PDU received by the controller and controller should receive only one ICReq PDU. If controller receives more than one ICReq PDU then this can be considered as fatal error. nvmet-tcp driver does not check for ICReq PDU opcode if queue state is NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU, this can result in abnormal behavior. Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue. Signed-off-by:
-
zhenwei pi authored
nvmet-tcp frees CMD buffers in nvmet_tcp_uninit_data_in_cmds(), and waits the inflight IO requests in nvmet_sq_destroy(). During wait the inflight IO requests, the callback nvmet_tcp_queue_response() is called from backend after IO complete, this leads a typical Use-After-Free issue like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 107f80067 P4D 107f80067 PUD 10789e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 123 Comm: kworker/1:1H Kdump: loaded Tainted: G E 6.0.0-rc2.bm.1-amd64 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work [nvmet_tcp] RIP: 0010:shash_ahash_digest+0x2b/0x110 Code: 1f 44 00 00 41 57 41 56 41 55 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 08 44 8b 67 30 45 85 e4 74 1c 48 8b 57 38 b8 00 10 00 00 <44> 8b 7a 08 44 29 f8 39 42 0c 0f 46 42 0c 41 39 c4 76 43 48 8b 03 RSP: 0018:ffffc9000051bdd8 EFLAGS: 00010206 RAX: 0000000000001000 RBX: ffff888100ab5470 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888100ab5470 RDI: ffff888100ab5420 RBP: ffff888100ab5420 R08: ffff8881024d08c8 R09: ffff888103e1b4b8 R10: 8080808080808080 R11: 0000000000000000 R12: 0000000000001000 R13: 0000000000000000 R14: ffff88813412bd4c R15: ffff8881024d0800 FS: 0000000000000000(0000) GS:ffff88883fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000104b48000 CR4: 0000000000350ee0 Call Trace: <TASK> nvmet_tcp_io_work+0xa52/0xb52 [nvmet_tcp] ? __switch_to+0x106/0x420 process_one_work+0x1ae/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Separate nvmet_tcp_uninit_data_in_cmds() into two steps: uninit data in cmds <- new step 1 nvmet_sq_destroy(); cancel_work_sync(&queue->io_work); free CMD buffers <- new step 2 Signed-off-by:
-
