- 18 Nov, 2016 19 commits
-
-
Mauro Carvalho Chehab authored
The dprintk() macro relies on continuation lines. This is not a good practice and will break after commit 56387331 ("Merge branch 'printk-cleanups'"). So, instead of directly calling printk(), use pr_foo() macros, adding a \n leading char on each macro call. The frontend settings also rely on continuation lines. Change it to avoid the need of adding pr_cont() calls. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
The dprintk() macro relies on continuation lines. This is not a good practice and will break after commit 56387331 ("Merge branch 'printk-cleanups"). So, instead of directly calling printk(), use pr_foo() macros, adding a \n leading char on each macro call. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
The dprintk() macro relies on continuation lines. This is not a good practice and will break after commit 56387331 ("Merge branch 'printk-cleanups"). So, instead of directly calling printk(), use pr_foo() macros, adding a \n leading char on each macro call. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Continuation lines without KERN_CONT won't work anymore. However, the way dprintk() was defined leads to the usage of continuation lines, with should be avoided when possible. So, redefine those macros. While hre, remove some dead code at av7110.c with also relies on continuation lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERNEL_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERNEL_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERNEL_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERN_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERN_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
This driver is old, and have lots of checkpatch violations. As we're touching a lot on this driver due to the printk conversions, let's run checkpatch --fix on it, in order to solve some of those issues. Also, do a few manual adjustments: - remove the FSF address and use the usual coding style for the initial comments; - use WARN_ON() instead of BUG_ON(); - remove an unused typedef; - break a few long lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Instead of calling printk() directly, use pr_foo() macros, as suggested at the Kernel's coding style. Please notice that a conversion to dev_foo() is not trivial, as several parts on this driver uses pr_cont(). Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERN_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups'"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. While here, add missing log level annotations. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Instead of calling printk() directly, use pr_foo() macros, as suggested at the Kernel's coding style. Please notice that a conversion to dev_foo() is not trivial, as several parts on this driver uses pr_cont(). Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
This file was converted to a separate module at commit 7a0786c1 ("gp8psk: Fix DVB frontend attach"), because the DVB attach routines require it to work. However, I forgot to copy the MODULE_foo() macros from the original module, causing this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/dvb-frontends/gp8psk-fe.o Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 7a0786c1 ("gp8psk: Fix DVB frontend attach") Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mauro Carvalho Chehab authored
Some continuation messages are not using KERN_CONT. Since commit 56387331 ("Merge branch 'printk-cleanups'"), this won't work as expected anymore. So, let's add KERN_CONT to those lines. While here, add missing log level annotations. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Replace printk() macros by their pr_foo() counterparts, using pr_cont() for continuation lines. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
This driver uses a weird, non-standard macro to print errors. It allows hiding all messages, including error ones, with doesn't seem a good idea. Instead, replace it to pr_foo(), and, for error messages, use pr_err(). The remaining messages were previouly classified as notice, info or debug, but they all looked like debug messages. So, add a dprintk() macro using the "verbose" modprobe argument to select what will be displayed. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
This driver has printk continuation lines for debugging purposes. Since commit 56387331 ("Merge branch 'printk-cleanups'")', this won't work as expected anymore. So, use %*ph and get rid of it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
This driver has printk continuation lines for debugging purposes. Since commit 56387331 ("Merge branch 'printk-cleanups'")', this won't work as expected anymore. So, use %*ph and get rid of it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 17 Nov, 2016 2 commits
-
-
Mauro Carvalho Chehab authored
The SVG files are larger than the draw dimentions, have long lines and aren't cleaned. Use inkscape to automatically fix those issues. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Somehow, two DVB headers were included twice. Remove the duplication Reported-by:
Markus Heiser <markus.heiser@darmarit.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 16 Nov, 2016 19 commits
-
-
Mauro Carvalho Chehab authored
Linux 4.9-rc5 * tag 'v4.9-rc5': (1102 commits) Linux 4.9-rc5 gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device iio: maxim_thermocouple: detect invalid storage size in read() aoe: fix crash in page count manipulation lightnvm: invalid offset calculation for lba_shift Kbuild: enable -Wmaybe-uninitialized warnings by default pcmcia: fix return value of soc_pcmcia_regulator_set infiniband: shut up a maybe-uninitialized warning crypto: aesni: shut up -Wmaybe-uninitialized warning rc: print correct variable for z8f0811 dib0700: fix nec repeat handling s390: pci: don't print uninitialized data for debugging nios2: fix timer initcall return value x86: apm: avoid uninitialized data NFSv4.1: work around -Wmaybe-uninitialized warning Kbuild: enable -Wmaybe-uninitialized warning for "make W=1" lib/stackdepot: export save/fetch stack for drivers mm: kmemleak: scan .data.ro_after_init ...
-
Marek Szyprowski authored
Clock control indirectly requires access to MFC device, so call it only if we are sure that the device exists in s5p_mfc_release function. s5p_mfc_remove() calls s5p_mfc_final_pm(), which releases all PM related resources, including clocks, so any call to clocks related functions is not valid after s5p_mfc_final_pm(). Fixes: d695c12c ("[media] media: s5p-mfc fix invalid memory access from s5p_mfc_release()") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
Newer MFC hardware have internal clock gating feature, so additional software-triggered clock gating sometimes causes misbehavior of the MFC firmware and results in freeze or crash. This patch changes the driver to use software-triggered clock gating only when working with v5 MFC hardware, where it has been proven to work properly. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Donghwa Lee authored
Currently, when incomplete frame is received in the middle of decoding, driver treats it as an error, so src/dst queue and clock are cleaned. Although it is obviously error case, it is needed to maintain video decoding in case of necessity. This patch supports skip incomplete frame to next. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ingi Kim authored
When video file was decoded by H/W MFCv8. It occurred IOMMU page fault because of accessing abnormal memory of mfc ctx buf. So this patch supports buffer size of mfc context more. Relevant page fault error is below. [ 3524.617147] PAGE FAULT occurred at 0x10108000 by 11200000.sysmmu(Page table base: 0x6d86c000) [ 3524.624192] Lv1 entry: 0x6c27d001 [ 3524.627567] Lv2 entry: 0x0 [ 3524.630482] ------------[ cut here ]------------ [ 3524.635020] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 3524.640567] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 3524.646373] Modules linked in: [ 3524.649410] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-00001-g0ff9b87-dirty #18 [ 3524.657117] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3524.663184] task: c0e4aff0 ti: c0e3c000 task.ti: c0e3c000 [ 3524.668566] PC is at exynos_sysmmu_irq+0x1b8/0x2c4 [ 3524.673330] LR is at vprintk_emit+0x2b8/0x58c [ 3524.677657] pc : [<c037cc78>] lr : [<c00704a4>] psr: 600d0193 [ 3524.677657] sp : c0e3dd90 ip : 00000000 fp : c0e3ddcc [ 3524.689092] r10: ee29a110 r9 : 00000000 r8 : ee29a128 [ 3524.694292] r7 : ed812810 r6 : 10108000 r5 : ed86c000 r4 : 00000000 [ 3524.700791] r3 : c0ec9bd8 r2 : 00000000 r1 : 00000000 r0 : ed82ff00 [ 3524.707292] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3524.714656] Control: 10c5387d Table: 6b08c06a DAC: 00000015 [ 3524.720375] Process swapper/0 (pid: 0, stack limit = 0xc0e3c210) [ 3524.726354] Stack: (0xc0e3dd90 to 0xc0e3e000) [ 3524.730689] dd80: c0e3dd9c c0069d68 ee58c338 6d86c000 [ 3524.738836] dda0: ee58c338 ee298c40 ee2915a0 0000003b c0e64ef4 c0e3c000 00000000 00000000 [ 3524.746981] ddc0: c0e3de14 c0e3ddd0 c0071ef4 c037cacc ffffffff a00d0193 c0e3ddf4 ee291540 [ 3524.755126] dde0: c0ec793c c0ec7928 7fffffff ee291540 ee2915a0 ee298c40 c0e64ef4 ee004660 [ 3524.763272] de00: ee010800 c0e3df00 c0e3de34 c0e3de18 c0072138 c0071e9c 00020000 ee291540 [ 3524.771418] de20: ee2915a0 00000016 c0e3de4c c0e3de38 c0075130 c00720f8 0000003b ee028300 [ 3524.779563] de40: c0e3de64 c0e3de50 c0071450 c0075068 00000100 00000012 c0e3de8c c0e3de68 [ 3524.787708] de60: c030d240 c0071420 c030d19c 00000016 00000000 00000016 00000000 00000001 [ 3524.795854] de80: c0e3dea4 c0e3de90 c0071450 c030d1a8 00000092 c0e37a1c c0e3ded4 c0e3dea8 [ 3524.804000] dea0: c0071790 c0071420 c0e3df00 f000200c 00000016 c0e440a8 c0e3df00 f0002000 [ 3524.812145] dec0: c095bc8c 00000001 c0e3defc c0e3ded8 c0008730 c0071710 c0010d88 c0010d8c [ 3524.820290] dee0: 600d0013 ffffffff c0e3df34 c0ec7eb4 c0e3df54 c0e3df00 c0014780 c00086fc [ 3524.828436] df00: 00000001 00000000 00000000 c0020780 c0e3c000 c0e43530 00000000 00000000 [ 3524.836581] df20: c0ec7eb4 c095bc8c 00000001 c0e3df54 c0e3df58 c0e3df48 c0010d88 c0010d8c [ 3524.844727] df40: 600d0013 ffffffff c0e3df94 c0e3df58 c0062690 c0010d50 c0ec75f0 00000001 [ 3524.852872] df60: c0e3df84 c0e4353c c0e39580 c0e43e84 c0e3c000 00000002 c0e3df58 c0e38b88 [ 3524.861018] df80: c0952b9c ffffffff c0e3dfac c0e3df98 c094d1b8 c00622d4 c0e3c000 c0e43e10 [ 3524.869163] dfa0: c0e3dff4 c0e3dfb0 c0d86d30 c094d130 ffffffff ffffffff c0d866f0 00000000 [ 3524.877309] dfc0: 00000000 c0df06d8 00000000 c0ee3f14 c0e434c0 c0df06d4 c0e4c20c 4000406a [ 3524.885454] dfe0: 410fc073 00000000 00000000 c0e3dff8 40008074 c0d86970 00000000 00000000 [ 3524.893610] [<c037cc78>] (exynos_sysmmu_irq) from [<c0071ef4>] (handle_irq_event_percpu+0x64/0x25c) [ 3524.902615] [<c0071ef4>] (handle_irq_event_percpu) from [<c0072138>] (handle_irq_event+0x4c/0x6c) [ 3524.911454] [<c0072138>] (handle_irq_event) from [<c0075130>] (handle_level_irq+0xd4/0x14c) [ 3524.919773] [<c0075130>] (handle_level_irq) from [<c0071450>] (generic_handle_irq+0x3c/0x4c) [ 3524.928180] [<c0071450>] (generic_handle_irq) from [<c030d240>] (combiner_handle_cascade_irq+0xa4/0x110) [ 3524.937624] [<c030d240>] (combiner_handle_cascade_irq) from [<c0071450>] (generic_handle_irq+0x3c/0x4c) [ 3524.946981] [<c0071450>] (generic_handle_irq) from [<c0071790>] (__handle_domain_irq+0x8c/0xfc) [ 3524.955646] [<c0071790>] (__handle_domain_irq) from [<c0008730>] (gic_handle_irq+0x40/0x78) [ 3524.963966] [<c0008730>] (gic_handle_irq) from [<c0014780>] (__irq_svc+0x40/0x74) [ 3524.971412] Exception stack(0xc0e3df00 to 0xc0e3df48) [ 3524.976441] df00: 00000001 00000000 00000000 c0020780 c0e3c000 c0e43530 00000000 00000000 [ 3524.984586] df20: c0ec7eb4 c095bc8c 00000001 c0e3df54 c0e3df58 c0e3df48 c0010d88 c0010d8c [ 3524.992729] df40: 600d0013 ffffffff [ 3524.996205] [<c0014780>] (__irq_svc) from [<c0010d8c>] (arch_cpu_idle+0x48/0x4c) [ 3525.003567] [<c0010d8c>] (arch_cpu_idle) from [<c0062690>] (cpu_startup_entry+0x3c8/0x4a4) [ 3525.011805] [<c0062690>] (cpu_startup_entry) from [<c094d1b8>] (rest_init+0x94/0x98) [ 3525.019516] [<c094d1b8>] (rest_init) from [<c0d86d30>] (start_kernel+0x3cc/0x3d8) [ 3525.026963] Code: e34c30ec e5932004 e3520000 ca000018 (e7f001f2) [ 3525.033028] ---[ end trace 71ed544f653b4d46 ]--- Signed-off-by:
Ingi Kim <ingi2.kim@samsung.com> Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andrzej Hajda authored
Driver complains about too small scratch buffer size. After adjusting it according to vendor code, decoding works. [mszyprow: moved the change to the header file] Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
This patch adds support for Exynos5433 specific version of the GScaler module. The main difference between Exynos 5433 and earlier is addition of new clocks that have to be controlled. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
This driver can be also used on Exynos5433, which is ARM64-based platform, which selects only ARCH_EXYNOS symbol. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
Replace open-coded driver data extraction code with generic helper. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
Fix missing newline char in debug messages. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
Remove dead, unused code. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Marek Szyprowski authored
System PM callbacks only ensure that device is runtime suspended/resumed, so remove them and use generic pm_runtime_force_suspend/resume helper. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
It's not needed to keep a local flag about the current system PM state. Let's just remove that code and the corresponding debug print. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
To potentially save more power in runtime PM suspend state, let's also prepare/unprepare the clock from the runtime PM callbacks. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
To make sure the clock is fully gated in ->remove(), we first need to to bring the device into full power by invoking pm_runtime_get_sync(). Then, let's both unprepare and disable the clock. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
There are no need to set up the PM callbacks (runtime and system) unless they are being used. It also causes compiler warnings about unused functions. Silence the warnings by making them available for CONFIG_PM (runtime callbacks) and CONFIG_PM_SLEEP (system sleep callbacks). [mszyprow: squashed two patches into one to avoid potential build break, changed patch subject and updated commit message] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
The driver depended on CONFIG_PM to be functional. Let's remove that dependency, by enable the runtime PM resourses during ->probe() and update the device's runtime PM status to reflect this. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
Since gsc_m2m_resume() always returns 0, convert it to a void instead. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ulf Hansson authored
Instead of having separate functions that fetches, prepares and unprepares the clock, let's encapsulate this code into ->probe(). This makes error handling easier and decreases the lines of code. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-