- 17 Sep, 2019 10 commits
-
-
Andrey Smirnov authored
There no reason why ziirave_firm_write_pkt() has to take firmware data via 'struct ihex_binrec' and it can just take address, data pointer and data length as individual arguments. Make this change to allow us to drastically simplify handling page crossing case by removing all of the extra code required to split 'struct ihex_binrec' into two. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-7-andrew.smirnov@gmail.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Andrey Smirnov authored
Log bootloader/firmware info during probe. This information is available via sysfs already, but it's really helpful to have this in kernel log during startup as well. Signed-off-by:
-
Andrey Smirnov authored
Reprogramming bootloader on watchdog MCU will result in reported default timeout value of "0". That in turn will be unnecessarily rejected by the driver as invalid device (-ENODEV). Simplify probe to read stored timeout value, set it to a sane default if it is bogus, and then program that value unconditionally. Signed-off-by:
-
Andrey Smirnov authored
Add more error logging to ziirave_firm_upload() for diagnostics. Signed-off-by:
-
Andrey Smirnov authored
The driver is quite silent in case of probe failure, which makes it more difficult to diagnose problem from the kernel log. Add logging to all of the silent error paths ziirave_wdt_probe() to improve that. Signed-off-by:
-
Andrey Smirnov authored
Add missing newline. Signed-off-by:
-
Anson Huang authored
An error message is already displayed by watchdog_register_device() when failed, so no need to have error log again for failure of calling devm_watchdog_register_device(). Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Rasmus Villemoes authored
Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228e "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
-
Arnd Bergmann authored
The cpwd_compat_ioctl() contains a bogus mutex that dates back to a leftover BKL instance. Simplify the implementation by using the new compat_ptr_ioctl() helper function that will do the right thing for all calls here. Note that WIOCSTART/WIOCSTOP don't take any arguments, so the compat_ptr() conversion is not needed here, but it also doesn't hurt. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Guenter Roeck authored
Commit f7a94db4 ("s390/watchdog: use watchdog API") converted the driver to use the watchdog API, but some includes as well as MODULE_ALIAS_MISCDEV() were missed. Cc: Philipp Hachtmann <phacht@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
- 16 Sep, 2019 3 commits
-
-
Arnd Bergmann authored
The ARM w90x900 platform is getting removed, so this driver is obsolete Signed-off-by:
-
Arnd Bergmann authored
The platform is getting removed, so there are no remaining users of this driver. Signed-off-by:
-
Arnd Bergmann authored
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Acked-by:
Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by:
-
- 12 Aug, 2019 6 commits
-
-
Gustavo A. R. Silva authored
Fix the following warning (Building: ci20_defconfig mips): drivers/watchdog/jz4740_wdt.c: In function ‘jz4740_wdt_probe’: drivers/watchdog/jz4740_wdt.c:165:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret; ^~~ Fixes: 9ee644c9 ("watchdog: jz4740_wdt: drop warning after registering device") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 24 Jul, 2019 1 commit
-
-
Christophe JAILLET authored
It is likely that 'ath97_wdt_shutdown()' should be 'ath79_wdt_shutdown()' Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
- 23 Jul, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Fix build issues when kprobes are enabled - Speed up ITLB/DTLB cache flushes when running on machines with combined TLBs * 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines parisc: add kprobe_fault_handler()
-
- 22 Jul, 2019 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull preemption Kconfig fix from Thomas Gleixner: "The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined PREEMPT outside of the menu and made it selectable by both PREEMPT_LL and PREEMPT_RT. Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which obviously can't work anymore. oldconfig builds are affected as well, but it's more obvious as the user gets asked. [old]defconfig silently fixes it up and selects PREEMPT_NONE. Unbreak it by undoing the rename and adding a intermediate config symbol which is selected by both PREEMPT and PREEMPT_RT. That requires to chase down a few #ifdefs, but it's better than tweaking 114 defconfigs and annoying users" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd polling fix from Christian Brauner: "A fix for pidfd polling. It ensures that the task's exit state is visible to all waiters" * tag 'for-linus-20190722' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: pidfd: fix a poll race when setting exit_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fixes for leaks caused by recently merged patches - one build fix - a fix to prevent mixing of incompatible features * tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't leak extent_map in btrfs_get_io_geometry() btrfs: free checksum hash on in close_ctree btrfs: Fix build error while LIBCRC32C is module btrfs: inode: Don't compress if NODATASUM or NODATACOW set
-
Thomas Gleixner authored
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on the preemption mode choice wich defaults to NONE. This also affects oldconfig builds. So rather than changing 114 defconfig files and being an annoyance to users, revert the rename and select a new config symbol PREEMPTION. That keeps everything working smoothly and the revelant ifdef's are going to be fixed up step by step. Reported-by:
Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For two regressions in media core: - v4l2-subdev: fix regression in check_pad() - videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use" * tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use media: v4l2-subdev: fix regression in check_pad() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several netfilter fixes including a nfnetlink deadlock fix from Florian Westphal and fix for dropping VRF packets from Miaohe Lin. 2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore proper block sharing. 3) Fix r8169 PHY init from Thomas Voegtle. 4) Fix memory leak in mac80211, from Lorenzo Bianconi. 5) Missing NULL check on object allocation in cxgb4, from Navid Emamdoost. 6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn. 7) Check that there is actually an ip header to access in skb->data in VRF, from Peter Kosyh. 8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang. 9) One more tweak the the TCP fragmentation memory limit changes, to be less harmful to applications setting small SO_SNDBUF values. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) tcp: be more careful in tcp_fragment() hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback() vrf: make sure skb->data contains ip header to make routing connector: remove redundant input callback from cn_dev qed: Prefer pcie_capability_read_word() igc: Prefer pcie_capability_read_word() cxgb4: Prefer pcie_capability_read_word() be2net: Synchronize be_update_queues with dev_watchdog bnx2x: Prevent load reordering in tx completion processing net: phy: sfp: hwmon: Fix scaling of RX power net: sched: verify that q!=NULL before setting q->flags chelsio: Fix a typo in a function name allocate_flower_entry: should check for null deref net: hns3: typo in the name of a constant kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist. tipc: Fix a typo mac80211: don't warn about CW params when not using them mac80211: fix possible memory leak in ieee80211_assign_beacon nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN nl80211: fix VENDOR_CMD_RAW_DATA ... -
Suren Baghdasaryan authored
There is a race between reading task->exit_state in pidfd_poll and writing it after do_notify_parent calls do_notify_pidfd. Expected sequence of events is: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd tsk->exit_state = EXIT_DEAD pidfd_poll if (tsk->exit_state) However nothing prevents the following sequence: CPU 0 CPU 1 ------------------------------------------------ exit_notify do_notify_parent do_notify_pidfd pidfd_poll if (tsk->exit_state) tsk->exit_state = EXIT_DEAD This causes a polling task to wait forever, since poll blocks because exit_state is 0 and the waiting task is not notified again. A stress test continuously doing pidfd poll and process exits uncovered this bug. To fix it, we make sure that the task's exit_state is always set before calling do_notify_pidfd. Fixes: b53b0b9d ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:Suren Baghdasaryan <surenb@google.com> Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org [christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by:
Christian Brauner <christian@brauner.io>
-
Eric Dumazet authored
Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
- 21 Jul, 2019 10 commits
-
-
Linus Torvalds authored
-
Peter Kosyh authored
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by:
Peter Kosyh <p.kosyh@gmail.com> Reviewed-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Vasily Averin authored
A small cleanup: this callback is never used. Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com> for OpenVZ7 bug OVZ-6877 cc: stanislav.kinsburskiy@gmail.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
-
Frederick Lawler authored
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Benjamin Poirier authored
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Brian King authored
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Andrew Lunn authored
The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by:Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
-
Vlad Buslov authored
In function int tc_new_tfilter() q pointer can be NULL when adding filter on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after filter creation, following NULL pointer dereference happens in case parent block is shared: [ 212.925060] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 212.925445] #PF: supervisor write access in kernel mode [ 212.925709] #PF: error_code(0x0002) - not-present page [ 212.925965] PGD 8000000827923067 P4D 8000000827923067 PUD 827924067 PMD 0 [ 212.926302] Oops: 0002 [#1] SMP KASAN PTI [ 212.926539] CPU: 18 PID: 2617 Comm: tc Tainted: G B 5.2.0+ #512 [ 212.926938] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 212.927364] RIP: 0010:tc_new_tfilter+0x698/0xd40 [ 212.927633] Code: 74 0d 48 85 c0 74 08 48 89 ef e8 03 aa 62 00 48 8b 84 24 a0 00 00 00 48 8d 78 10 48 89 44 24 18 e8 4d 0c 6b ff 48 8b 44 24 18 <83> 60 10 f b 48 85 ed 0f 85 3d fe ff ff e9 4f fe ff ff e8 81 26 f8 [ 212.928607] RSP: 0018:ffff88884fd5f5d8 EFLAGS: 00010296 [ 212.928905] RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 212.929201] RDX: 0000000000000007 RSI: 0000000000000004 RDI: 0000000000000297 [ 212.929402] RBP: ffff88886bedd600 R08: ffffffffb91d4b51 R09: fffffbfff7616e4d [ 212.929609] R10: fffffbfff7616e4c R11: ffffffffbb0b7263 R12: ffff88886bc61040 [ 212.929803] R13: ffff88884fd5f950 R14: ffffc900039c5000 R15: ffff88835e927680 [ 212.929999] FS: 00007fe7c50b6480(0000) GS:ffff88886f980000(0000) knlGS:0000000000000000 [ 212.930235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 212.930394] CR2: 0000000000000010 CR3: 000000085bd04002 CR4: 00000000001606e0 [ 212.930588] Call Trace: [ 212.930682] ? tc_del_tfilter+0xa40/0xa40 [ 212.930811] ? __lock_acquire+0x5b5/0x2460 [ 212.930948] ? find_held_lock+0x85/0xa0 [ 212.931081] ? tc_del_tfilter+0xa40/0xa40 [ 212.931201] rtnetlink_rcv_msg+0x4ab/0x5f0 [ 212.931332] ? rtnl_dellink+0x490/0x490 [ 212.931454] ? lockdep_hardirqs_on+0x260/0x260 [ 212.931589] ? netlink_deliver_tap+0xab/0x5a0 [ 212.931717] ? match_held_lock+0x1b/0x240 [ 212.931844] netlink_rcv_skb+0xd0/0x200 [ 212.931958] ? rtnl_dellink+0x490/0x490 [ 212.932079] ? netlink_ack+0x440/0x440 [ 212.932205] ? netlink_deliver_tap+0x161/0x5a0 [ 212.932335] ? lock_downgrade+0x360/0x360 [ 212.932457] ? lock_acquire+0xe5/0x210 [ 212.932579] netlink_unicast+0x296/0x350 [ 212.932705] ? netlink_attachskb+0x390/0x390 [ 212.932834] ? _copy_from_iter_full+0xe0/0x3a0 [ 212.932976] netlink_sendmsg+0x394/0x600 [ 212.937998] ? netlink_unicast+0x350/0x350 [ 212.943033] ? move_addr_to_kernel.part.0+0x90/0x90 [ 212.948115] ? netlink_unicast+0x350/0x350 [ 212.953185] sock_sendmsg+0x96/0xa0 [ 212.958099] ___sys_sendmsg+0x482/0x520 [ 212.962881] ? match_held_lock+0x1b/0x240 [ 212.967618] ? copy_msghdr_from_user+0x250/0x250 [ 212.972337] ? lock_downgrade+0x360/0x360 [ 212.976973] ? rwlock_bug.part.0+0x60/0x60 [ 212.981548] ? __mod_node_page_state+0x1f/0xa0 [ 212.986060] ? match_held_lock+0x1b/0x240 [ 212.990567] ? find_held_lock+0x85/0xa0 [ 212.994989] ? do_user_addr_fault+0x349/0x5b0 [ 212.999387] ? lock_downgrade+0x360/0x360 [ 213.003713] ? find_held_lock+0x85/0xa0 [ 213.007972] ? __fget_light+0xa1/0xf0 [ 213.012143] ? sockfd_lookup_light+0x91/0xb0 [ 213.016165] __sys_sendmsg+0xba/0x130 [ 213.020040] ? __sys_sendmsg_sock+0xb0/0xb0 [ 213.023870] ? handle_mm_fault+0x337/0x470 [ 213.027592] ? page_fault+0x8/0x30 [ 213.031316] ? lockdep_hardirqs_off+0xbe/0x100 [ 213.034999] ? mark_held_locks+0x24/0x90 [ 213.038671] ? do_syscall_64+0x1e/0xe0 [ 213.042297] do_syscall_64+0x74/0xe0 [ 213.045828] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 213.049354] RIP: 0033:0x7fe7c527c7b8 [ 213.052792] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f 0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 213.060269] RSP: 002b:00007ffc3f7908a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 213.064144] RAX: ffffffffffffffda RBX: 000000005d34716f RCX: 00007fe7c527c7b8 [ 213.068094] RDX: 0000000000000000 RSI: 00007ffc3f790910 RDI: 0000000000000003 [ 213.072109] RBP: 0000000000000000 R08: 0000000000000001 R09: 00007fe7c5340cc0 [ 213.076113] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000080 [ 213.080146] R13: 0000000000480640 R14: 0000000000000080 R15: 0000000000000000 [ 213.084147] Modules linked in: act_gact cls_flower sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc intel_rapl_msr intel_rapl_common [<1;69;32Msb_edac rdma_ucm rdma_cm x86_pkg_temp_thermal iw_cm intel_powerclamp ib_cm coretemp kvm_intel kvm irqbypass mlx5_ib ib_uverbs ib_core crct10dif_pclmul crc32_pc lmul crc32c_intel ghash_clmulni_intel mlx5_core intel_cstate intel_uncore iTCO_wdt igb iTCO_vendor_support mlxfw mei_me ptp ses intel_rapl_perf mei pcspkr ipmi _ssif i2c_i801 joydev enclosure pps_core lpc_ich ioatdma wmi dca ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_vram_helpe r ttm drm_kms_helper drm mpt3sas raid_class scsi_transport_sas [ 213.112326] CR2: 0000000000000010 [ 213.117429] ---[ end trace adb58eb0a4ee6283 ]--- Verify that q pointer is not NULL before setting the 'flags' field. Fixes: 3f05e688 ("net_sched: unset TCQ_F_CAN_BYPASS when adding filters") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
