- 02 Apr, 2021 19 commits
-
-
Matthieu Baerts authored
'mptcp_connect' already has a timeout for poll() but in some cases, it is not enough. With "timeout" tool, we will force the command to fail if it doesn't finish on time. Thanks to that, the script will continue and display details about the current state before marking the test as failed. Displaying this state is very important to be able to understand the issue. Best to have our CI reporting the issue than just "the test hanged". Note that in mptcp_connect.sh, we were using a long timeout to validate the fact we cannot create a socket if a sysctl is set. We don't need this timeout. In diag.sh, we want to send signals to mptcp_connect instances that have been started in the netns. But we cannot send this signal to 'timeout' otherwise that will stop the timeout and messages telling us SIGUSR1 has been received will be printed. Instead of trying to find the right PID and storing them in an array, we can simply use the output of 'ip netns pids' which is all the PIDs we want to send signal to. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
The MPTCP reset option allows to carry a mptcp-specific error code that provides more information on the nature of a connection reset. Reset option data received gets stored in the subflow context so it can be sent to userspace via the 'subflow closed' netlink event. When a subflow is closed, the desired error code that should be sent to the peer is also placed in the subflow context structure. If a reset is sent before subflow establishment could complete, e.g. on HMAC failure during an MP_JOIN operation, the mptcp skb extension is used to store the reset information. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Paolo Abeni authored
Currently we explicitly check for the first subflow being NULL in a couple of places, even if we don't need any special actions in such scenario. Just drop the unneeded checks, to avoid confusion. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
We are not currently tracking the active MPTCP connection attempts. Let's add the related counters. Signed-off-by:
-
Paolo Abeni authored
If the MPTCP protocol is unable to create a new token, the socket fallback to plain TCP, let's keep track of such events via a specific MIB. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: add PTP and hw clock support This patchset adds support for accessing the DSC hardware clock and for offloading PTP timestamping. Tx packet timestamping happens through a separate Tx queue set up with expanded completion descriptors that can report the timestamp. Rx timestamping can happen either on all queues, or on a separate timestamping queue when specific filtering is requested. Again, the timestamps are reported with the expanded completion descriptors. The timestamping offload ability is advertised but not enabled until an OS service asks for it. At that time the driver's queues are reconfigured to use the different completion descriptors and the private processing queues as needed. Reading the raw clock value comes through a new pair of values in the device info registers in BAR0. These high and low values are interpreted with help from new clock mask, mult, and shift values in the device identity information. First we add the ability to detect new queue features, then the handling of the new descriptor sizes. After adding the new interface structures, we start adding the support code, saving the advertising to the stack for last. ==================== Signed-off-by: -
Shannon Nelson authored
Let the network stack know we've got support for timestamping the packets. Signed-off-by:
Allen Hubbe <allenbh@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Add the new hwstamp stats to our ethtool stats output. Signed-off-by:
-
Shannon Nelson authored
Add the get_ts_info() callback for ethtool support of timestamping information. Signed-off-by:
-
Shannon Nelson authored
The Tx and Rx timestamped packets are handled through separate queues. Here we set them up, service them, and tear them down along with the normal Tx and Rx queues. Signed-off-by:
-
Shannon Nelson authored
We do hardware timestamping through a separate Tx queue, and optionally through a separate Rx queue. These queues are allocated, freed, and tracked separately from the basic queue arrays. Signed-off-by:
-
Shannon Nelson authored
Add handling of the new Rx packet classification filter type. This simple bit of classification allows for steering packets to a separate Rx queue for processing. Signed-off-by:
-
Shannon Nelson authored
These are changes to compile and link the new code, but no new feature support is available or advertised yet. Signed-off-by:
-
Shannon Nelson authored
This adds the file of code for supporting Tx and Rx hardware timestamps and the raw clock interface, but does not yet link it in for compiling or use. Signed-off-by:
-
Shannon Nelson authored
Split the wait part out of adminq_post_wait() into a separate function so that a caller can have finer grain control over the sequencing of operations and locking. Signed-off-by:
-
Shannon Nelson authored
The interface for hardware timestamping includes a new FW request, device identity fields, Tx and Rx queue feature bits, a new Rx filter type, the beginnings of Rx packet classifications, and hardware timestamp registers. If the IONIC_ETH_HW_TIMESTAMP bit is shown in the ionic_lif_config features bit string, then we have support for the hw clock registers. If the IONIC_RXQ_F_HWSTAMP and IONIC_TXQ_F_HWSTAMP features are shown in the ionic_q_identity features, then the queues can support HW timestamps on packets. Signed-off-by:
-
Shannon Nelson authored
In preparating for hardware timestamping, we need to support large Tx and Rx completion descriptors. Here we add the new queue feature ids and handling for the completion descriptor sizes. We only are adding support for the Rx 2x sized completion descriptors in the general Rx queues for now as we will be using it for PTP Rx support, and we don't have an immediate use for the large descriptors in the general Tx queues yet; it will be used in a special Tx queues added in one of the next few patches. Signed-off-by:
-
Shannon Nelson authored
Add queue feature extensions to prepare for features that can be queue specific, in addition to the general queue features already defined. While we're here, change the existing feature ids from #defines to enum. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 68 non-merge commits during the last 7 day(s) which contain a total of 70 files changed, 2944 insertions(+), 1139 deletions(-). The main changes are: 1) UDP support for sockmap, from Cong. 2) Verifier merge conflict resolution fix, from Daniel. 3) xsk selftests enhancements, from Maciej. 4) Unstable helpers aka kernel func calling, from Martin. 5) Batches ops for LPM map, from Pedro. 6) Fix race in bpf_get_local_storage, from Yonghong. ==================== Signed-off-by:
-
- 01 Apr, 2021 21 commits
-
-
Phillip Potter authored
Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com Signed-off-by:
Phillip Potter <phil@philpotter.co.uk> Signed-off-by:
-
Florian Fainelli authored
All Gigabit PHYs use the same register layout as far as fetching statistics goes. Fast Ethernet PHYs do not all support statistics, and the BCM54616S would require some switching between the coper and fiber modes to fetch the appropriate statistics which is not supported yet. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Otto Hollmann authored
If there is overlapp between ip_local_port_range and ip_local_reserved_ports with a huge reserved block, it will affect probability of selecting ephemeral ports, see file net/ipv4/inet_hashtables.c:723 int __inet_hash_connect( ... for (i = 0; i < remaining; i += 2, port += 2) { if (unlikely(port >= high)) port -= remaining; if (inet_is_local_reserved_port(net, port)) continue; E.g. if there is reserved block of 10000 ports, two ports right after this block will be 5000 more likely selected than others. If this was intended, we can/should add note into documentation as proposed in this commit, otherwise we should think about different solution. One option could be mapping table of continuous port ranges. Second option could be letting user to modify step (port+=2) in above loop, e.g. using new sysctl parameter. Signed-off-by:Otto Hollmann <otto.hollmann@suse.com> Signed-off-by:
-
Yang Yingliang authored
Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Lu Wei authored
Fix some typos. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Lu Wei <luwei32@huawei.com> Signed-off-by:
-
Wan Jiabing authored
struct smc_clc_msg_local is declared twice. One is declared at 301st line. The blew one is not needed. Remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Acked-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Wan Jiabing authored
struct ctl_table_header is declared twice. One is declared at 46th line. The blew one is not needed. Remove the duplicate. Signed-off-by:
-
Wong Vee Khee authored
The commit d2a029bd ("stmmac: pci: add MSI support for Intel Quark X1000") introduced a pci_enable_msi() call in stmmac_pci.c. With the commit 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform"), Intel Quark platform related codes have been moved to the newly created driver. Removing this unnecessary pci_enable_msi() call as there are no other devices that uses stmmac-pci and need MSI to be enabled. Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Wong Vee Khee authored
Update dwmac-intel to use managed function, i.e. pcim_enable_device(). This will allow devres framework to call resource free function for us. Signed-off-by:
-
Xu Jia authored
The logic in rt6_age_examine_exception is confusing. The commit is to refactor the code. Signed-off-by:
Xu Jia <xujia39@huawei.com> Signed-off-by:
-
Hoang Le authored
When enabling a bearer by name, we don't sanity check its name with higher slot in bearer list. This may have the effect that the name of an already enabled bearer bypasses the check. To fix the above issue, we just perform an extra checking with all existing bearers. Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()") Cc: stable@vger.kernel.org Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-03-31 This series contains updates to ice driver only. Benita adds support for XPS. Ani moves netdev registration to the end of probe to prevent use before the interface is ready and moves up an error check to possibly avoid an unneeded call. He also consolidates the VSI state and flag fields to a single field. Dan changes the segment where package information is pulled. Paul S ensures correct ITR values are set when increasing ring size. Paul G rewords a link misconfiguration message as this could be expected. Bruce removes setting an unnecessary AQ flag and corrects a memory allocation call. Also fixes checkpatch issues for 'COMPLEX_MACRO'. Qi aligns PTYPE bitmap naming by adding 'ptype' prefix to the bitmaps missing it. Brett removes limiting Rx queue mapping to RSS size as there is not a dependency on this. He also refactors RSS configuration by introducing individual functions for LUT and key configuration and by passing a structure containing pertinent information instead of individual arguments. Tony corrects a comment block to follow netdev style. ==================== Signed-off-by: -
Alexei Starovoitov authored
Cong Wang says: ==================== From: Cong Wang <cong.wang@bytedance.com> We have thousands of services connected to a daemon on every host via AF_UNIX dgram sockets, after they are moved into VM, we have to add a proxy to forward these communications from VM to host, because rewriting thousands of them is not practical. This proxy uses an AF_UNIX socket connected to services and a UDP socket to connect to the host. It is inefficient because data is copied between kernel space and user space twice, and we can not use splice() which only supports TCP. Therefore, we want to use sockmap to do the splicing without going to user-space at all (after the initial setup). Currently sockmap only fully supports TCP, UDP is partially supported as it is only allowed to add into sockmap. This patchset, as the second part of the original large patchset, extends sockmap with: 1) cross-protocol support with BPF_SK_SKB_VERDICT; 2) full UDP support. On the high level, ->read_sock() is required for each protocol to support sockmap redirection, and in order to do sock proto update, a new ops ->psock_update_sk_prot() is introduced, which is also required. And the BPF ->recvmsg() is also needed to replace the original ->recvmsg() to retrieve skmsg. To make life easier, we have to get rid of lock_sock() in sk_psock_handle_skb(), otherwise we would have to implement ->sendmsg_locked() on top of ->sendmsg(), which is ugly. Please see each patch for more details. To see the big picture, the original patchset is available here: https://github.com/congwang/linux/tree/sockmap this patchset is also available: https://github.com/congwang/linux/tree/sockmap2 --- v8: get rid of 'offset' in udp_read_sock() add checks for skb_verdict/stream_verdict conflict add two cleanup patches for sock_map_link() add a new test case v7: use work_mutex to protect psock->work return err in udp_read_sock() add patch 6/13 clean up test case v6: get rid of sk_psock_zap_ingress() add rcu work patch v5: use INDIRECT_CALL_2() for function pointers use ingress_lock to fix a race condition found by Jacub rename two helper functions v4: get rid of lock_sock() in sk_psock_handle_skb() get rid of udp_sendmsg_locked() remove an empty line update cover letter v3: export tcp/udp_update_proto() rename sk->sk_prot->psock_update_sk_prot() improve changelogs v2: separate from the original large patchset rebase to the latest bpf-next split UDP test case move inet_csk_has_ulp() check to tcp_bpf.c clean up udp_read_sock() ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Cong Wang authored
This adds a test case to ensure BPF_SK_SKB_VERDICT and BPF_SK_STREAM_VERDICT will never be attached at the same time. Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Cong Wang authored
Add a test case to ensure redirection between two UDP sockets work. Signed-off-by:
-
Cong Wang authored
Now UDP supports sockmap and redirection, we can safely update the sock type checks for it accordingly. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210331023237.41094-15-xiyou.wangcong@gmail.com
-
Cong Wang authored
We have to implement udp_bpf_recvmsg() to replace the ->recvmsg() to retrieve skmsg from ingress_msg. Signed-off-by:
-
Cong Wang authored
Although these two functions are only used by TCP, they are not specific to TCP at all, both operate on skmsg and ingress_msg, so fit in net/core/skmsg.c very well. And we will need them for non-TCP, so rename and move them to skmsg.c and export them to modules. Signed-off-by:
-
Cong Wang authored
This is similar to tcp_read_sock(), except we do not need to worry about connections, we just need to retrieve skb from UDP receive queue. Note, the return value of ->read_sock() is unused in sk_psock_verdict_data_ready(), and UDP still does not support splice() due to lack of ->splice_read(), so users can not reach udp_read_sock() directly. Signed-off-by:
-
Cong Wang authored
Currently sockmap calls into each protocol to update the struct proto and replace it. This certainly won't work when the protocol is implemented as a module, for example, AF_UNIX. Introduce a new ops sk->sk_prot->psock_update_sk_prot(), so each protocol can implement its own way to replace the struct proto. This also helps get rid of symbol dependencies on CONFIG_INET. Signed-off-by:
-
Cong Wang authored
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is confusing and more importantly we still want to distinguish them from user-space. So we can just reuse the stream verdict code but introduce a new type of eBPF program, skb_verdict. Users are not allowed to attach stream_verdict and skb_verdict programs to the same map. Signed-off-by:
-
