1. 05 Dec, 2017 2 commits
  2. 04 Dec, 2017 2 commits
  3. 02 Dec, 2017 1 commit
  4. 01 Dec, 2017 13 commits
  5. 30 Nov, 2017 6 commits
  6. 29 Nov, 2017 6 commits
    • Sagar Arun Kamble's avatar
      drm/i915/guc: Change default GuC FW for KBL to v9.39 · cc440856
      Sagar Arun Kamble authored
      This patch makes v9.39 firmware as default firmware for KBL.
      
      Note: GuC logging control is changed with this firmware. GuC is
      expecting i915 to set control bit to enable "default logging"
      while using GuC action UK_LOG_ENABLE_LOGGING.
      However i915 is currently not doing this because it is version
      specific change and can be handled entirely in GuC. It will need
      to be fixed in future firmwares.
      
      This update includes (since v9.14):
      
      - DCC spec changes for BXT + DCT enabling
      - Bug Fix for power conservation feature SLPC_DCC
      - Scheduler 1-element submission during DCC cycles.
      - SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
      - Moving GuC non_critical r/w data to lower SRAM 64KB
      - Media engine Reset fix.  Correctly marking context for resubmission in
        Media Reset case.
      - ABT Disable bug fix. Disabled Evaluation mode on context change.
      - Async FW in Engine Schedule feature (not enabled from KMD)
      - GuC clean up to align developer build in line to production build.
      - Disable ARAT interrupt before programming ARAT delta.
      - Memory range check in Parse to avoid failure due to overflow.
      - GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low
        during CPD flow.
      - Fix for submit queue over flow issue
      - Enabling IBC on KBL GT3 15W, GT4 45W
      - Disabling wrong device ID WA in production signed kernel
      - Enabling WA for MSGCH hang issue upto required KBL stepping
      - Clear forcewake in CSB when SQ is empty.
      - 3Tries of GuC2CSME wake request
      - During reset one parameter was not getting accounted
      - Disable DCC 1-elem mode submission
      - Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
      - This is file location change.No functional change done as part of this
        check in.
      - Enabling Guc Log changes for ultra low logging for OCA
      - Enabling Dynamic Render Power Well Hysteresis Programming for Compute
        Worklaods
      - Enabling build failure check to catch critical section overflow.
      - Disable build.bat redundant prints.
      - Move few least used functions to non-critical section.
      - Rearrange GuC documentation folder structure.
      - Synchronize SLPC internal debug interface with other branches.
      - Fixing Issue with Default Guc Log changes for OCA using special Control
        Bit
      - Aggressive DCC implementation for supported platforms.
      
      v2: Rebase. Updated commit message.
      Signed-off-by: default avatarJeff McGee <jeff.mcgee@intel.com>
      Signed-off-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
      Cc: Spotswood John A <john.a.spotswood@intel.com>
      Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
      Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com >
      Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-4-git-send-email-sagar.a.kamble@intel.com
      cc440856
    • Sagar Arun Kamble's avatar
      drm/i915/guc: Change default GuC FW for BXT to v9.29 · d416ac78
      Sagar Arun Kamble authored
      This patch makes v9.29 firmware as default firmware for BXT.
      
      Note: GuC logging control is changed with this firmware. GuC is
      expecting i915 to set control bit to enable "default logging"
      while using GuC action UK_LOG_ENABLE_LOGGING.
      However i915 is currently not doing this because it is version
      specific change and can be handled entirely in GuC. It will need
      to be fixed in future firmwares.
      
      This update includes (since v8.7):
      
      - Added support to log media reset count for host to read it
      - BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
      - Sub-feature level control for power management features.
      - Minor clean-up for power management interface.
      - Unified power management interface and scheduler interface into
        1 file using same version.
      - Bug Fix for multi context scheduler flag.
      - DCC spec changes for BXT + DCT enabling
      - Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
      - Moving GuC non_critical r/w data to lower SRAM 64KB
      - Enabled IBC for BXT
      - Media engine Reset fix.  Correctly marking context for resubmission in
        Media Reset case.
      - SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
      - ABT Disable bug fix. Disabled Evaluation mode on context change.
      - GuC clean up to align developer build in line to production build.
      - Disable ARAT interrupt before programming ARAT delta.
      - Memory range check in Parse to avoid failure due to overflow.
      - Clear forcewake in CSB when SQ is empty.
      - SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
      - Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
      - This is file location change. No functional change done as part of this
        check in.
      - 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
        has come from ME spec
      - During reset one parameter was not getting accounted
      - Enabling Guc Log changes for ultra low logging for OCA
      - Disable build.bat redundant prints.
      - Move few least used functions to non-critical section.
      - Rearrange GuC documentation folder structure.
      - Fixing Issue with Default Guc Log changes for OCA using special Control
        Bit
      
      v2: Rebase. Updated commit message.
      Signed-off-by: default avatarJeff McGee <jeff.mcgee@intel.com>
      Signed-off-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
      Cc: Spotswood John A <john.a.spotswood@intel.com>
      Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
      Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Reviewed-by: default avatarAnusha Srivatsa <anusha.srivatsa@intel.com>
      Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-3-git-send-email-sagar.a.kamble@intel.com
      d416ac78
    • Sagar Arun Kamble's avatar
      drm/i915/guc: Change default GuC FW for SKL to v9.33 · 580b9d05
      Sagar Arun Kamble authored
      This patch makes v9.33 firmware as default firmware for SKL.
      
      Note: GuC logging control is changed with this firmware. GuC is
      expecting i915 to set control bit to enable "default logging"
      while using GuC action UK_LOG_ENABLE_LOGGING.
      However i915 is currently not doing this because it is version
      specific change and can be handled entirely in GuC. It will need
      to be fixed in future firmwares.
      
      This update includes (since v6.1):
      
      - HuC RSA Keys updated.
      - Adding per engine preemption support in GuC scheduler
      - Minor bug fixes.
      - Added support to log media reset count for host to read it
      - Sub-feature level control for power management features.
      - Minor clean-up for power management interface.
      - Unified power management interface and scheduler interface into
        1 file using same version.
      - Bug Fix for multi context scheduler flag.
      - DCC spec changes for BXT + DCT enabling
      - SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
      - Moving GuC non_critical r/w data to lower SRAM 64KB
      - Media engine Reset fix.  Correctly marking context for resubmission in
        Media Reset case.
      - ABT Disable bug fix. Disabled Evaluation mode on context change.
      - Async FW in Engine Schedule feature (not enabled from KMD)
      - GuC clean up to align developer build in line to production build.
      - DCC consistency fix for SKL
      - Disable ARAT interrupt before programming ARAT delta.
      - Memory range check in Parse to avoid failure due to overflow.
      - Enabled WA for MSGCH hang issue
      - Clear forcewake in CSB when SQ is empty.
      - Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
      - This is file location change.No functional change done as part of this
        check in.
      - Enable decoupled freq for SKL GT4
      - 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
        has come from ME spec
      - During reset one parameter was not getting accounted
      - Enabling Guc Log changes for ultra low logging for OCA
      - Enabling build failure check to catch critical section overflow.
      - Disable build.bat redundant prints.
      - Move few least used functions to non-critical section.
      - Rearrange GuC documentation folder structure.
      - Synchronize SLPC internal debug interface with other branches.
      - Fixing Issue with Default Guc Log changes for OCA using special Control
        Bit
      
      v2: Rebase. Updated commit message.
      Signed-off-by: default avatarJeff McGee <jeff.mcgee@intel.com>
      Signed-off-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
      Cc: Spotswood John A <john.a.spotswood@intel.com>
      Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
      Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Reviewed-by: default avatarAnusha Srivatsa <anusha.srivatsa@intel.com>
      Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-2-git-send-email-sagar.a.kamble@intel.com
      580b9d05
    • Tvrtko Ursulin's avatar
      drm/i915: Consolidate checks for engine stats availability · cf669b4e
      Tvrtko Ursulin authored
      Sagar noticed the check can be consolidated between the engine stats
      implementation and the PMU.
      
      My first choice was a static inline helper but that got into include
      ordering mess quickly fast so I went with a macro instead. At some point
      we should perhaps looking into taking out the non-ringubffer bits from
      intel_ringbuffer.h into a new intel_engine.h or something.
      
      v2: Use engine->flags. (Chris Wilson)
      v3: Rebase and mark GuC as not yet supported. (Chris Wilson)
      v4: Move flag setting to intel_engines_reset_default_submission.
          (Chris Wilson)
      v5: Move flag setting to logical_ring_setup.
      v6: intel_engines_reset_default_submission is the wrong place to set the
          flag - it needs to be in execlists_set_default_submission. (Sagar)
      v7: Flag setting in logical_ring_setup is not required. (Chris)
      Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
      Suggested-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
      Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v6)
      Link: https://patchwork.freedesktop.org/patch/msgid/20171129102805.22690-1-tvrtko.ursulin@linux.intel.com
      cf669b4e
    • Tvrtko Ursulin's avatar
      drm/i915: Move engine->needs_cmd_parser to engine->flags · 439e2ee4
      Tvrtko Ursulin authored
      Will be adding a new per-engine flags shortly so it makes sense
      to consolidate.
      
      v2: Keep the original code flow in intel_engine_cleanup_cmd_parser.
          (Joonas Lahtinen)
      Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
      Suggested-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarSagar Arun Kamble <sagar.a.kamble@intel.com>
      Reviewed-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20171129082409.18189-1-tvrtko.ursulin@linux.intel.com
      439e2ee4
    • Joonas Lahtinen's avatar
      drm/i915: Disable THP until we have a GPU read BW W/A · 9987da4b
      Joonas Lahtinen authored
      We seem to be missing some W/A for 2M pages and are getting
      a hit on raw GPU read bandwidths (even 30%) even though the
      GPU write bandwidths improve (even 10%).
      
      For now, disable THP, which is our only practical source of
      2M pages until we have a W/A for the issue.
      
      v2:
      - Be explicit that we talk about GPU bandwidths (Eero)
      - s/deny/never/ because that's why (Chris)
      Reported-by: default avatarValtteri Rantala <valtteri.rantala@intel.com>
      Fixes: b901bb89 ("drm/i915/gemfs: enable THP")
      Signed-off-by: default avatarJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Matthew Auld <matthew.auld@intel.com>
      Cc: Chris Wilson <chris@chris-wilson.co.uk>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Valtteri Rantala <valtteri.rantala@intel.com>
      Cc: Eero Tamminen <eero.t.tamminen@intel.com>
      Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarMatthew Auld <matthew.auld@intel.com>
      Tested-by: default avatarValtteri Rantala <valtteri.rantala@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20171127091233.7001-1-joonas.lahtinen@linux.intel.com
      9987da4b
  7. 28 Nov, 2017 2 commits
  8. 27 Nov, 2017 7 commits
  9. 26 Nov, 2017 1 commit
    • Chris Wilson's avatar
      drm/i915/fbdev: Serialise early hotplug events with async fbdev config · ad88d7fc
      Chris Wilson authored
      As both the hotplug event and fbdev configuration run asynchronously, it
      is possible for them to run concurrently. If configuration fails, we were
      freeing the fbdev causing a use-after-free in the hotplug event.
      
      <7>[ 3069.935211] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
      <7>[ 3069.935225] [drm:drm_setup_crtcs] looking for cmdline mode on connector 77
      <7>[ 3069.935229] [drm:drm_setup_crtcs] looking for preferred mode on connector 77 0
      <7>[ 3069.935233] [drm:drm_setup_crtcs] found mode 3200x1800
      <7>[ 3069.935236] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
      <7>[ 3069.935253] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 43 (0,0)
      <7>[ 3069.935323] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
      <4>[ 3069.967737] general protection fault: 0000 [#1] PREEMPT SMP
      <0>[ 3069.977453] ---------------------------------
      <4>[ 3069.977457] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mei_me mii prime_numbers mei i2c_hid pinctrl_geminilake pinctrl_intel [last unloaded: i915]
      <4>[ 3069.977492] CPU: 1 PID: 15414 Comm: kworker/1:0 Tainted: G     U          4.14.0-CI-CI_DRM_3388+ #1
      <4>[ 3069.977497] Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017
      <4>[ 3069.977508] Workqueue: events output_poll_execute
      <4>[ 3069.977512] task: ffff880177734e40 task.stack: ffffc90001fe4000
      <4>[ 3069.977519] RIP: 0010:__lock_acquire+0x109/0x1b60
      <4>[ 3069.977523] RSP: 0018:ffffc90001fe7bb0 EFLAGS: 00010002
      <4>[ 3069.977526] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000282 RCX: 0000000000000000
      <4>[ 3069.977530] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880170d4efd0
      <4>[ 3069.977534] RBP: ffffc90001fe7c70 R08: 0000000000000001 R09: 0000000000000000
      <4>[ 3069.977538] R10: 0000000000000000 R11: ffffffff81899609 R12: ffff880170d4efd0
      <4>[ 3069.977542] R13: ffff880177734e40 R14: 0000000000000001 R15: 0000000000000000
      <4>[ 3069.977547] FS:  0000000000000000(0000) GS:ffff88017fc80000(0000) knlGS:0000000000000000
      <4>[ 3069.977551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      <4>[ 3069.977555] CR2: 00007f7e8b7bcf04 CR3: 0000000003e0f000 CR4: 00000000003406e0
      <4>[ 3069.977559] Call Trace:
      <4>[ 3069.977565]  ? mark_held_locks+0x64/0x90
      <4>[ 3069.977571]  ? _raw_spin_unlock_irq+0x24/0x50
      <4>[ 3069.977575]  ? _raw_spin_unlock_irq+0x24/0x50
      <4>[ 3069.977579]  ? trace_hardirqs_on_caller+0xde/0x1c0
      <4>[ 3069.977583]  ? _raw_spin_unlock_irq+0x2f/0x50
      <4>[ 3069.977588]  ? finish_task_switch+0xa5/0x210
      <4>[ 3069.977592]  ? lock_acquire+0xaf/0x200
      <4>[ 3069.977596]  lock_acquire+0xaf/0x200
      <4>[ 3069.977600]  ? __mutex_lock+0x5e9/0x9b0
      <4>[ 3069.977604]  _raw_spin_lock+0x2a/0x40
      <4>[ 3069.977608]  ? __mutex_lock+0x5e9/0x9b0
      <4>[ 3069.977612]  __mutex_lock+0x5e9/0x9b0
      <4>[ 3069.977616]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
      <4>[ 3069.977621]  ? drm_fb_helper_hotplug_event.part.19+0x16/0xa0
      <4>[ 3069.977625]  drm_fb_helper_hotplug_event.part.19+0x16/0xa0
      <4>[ 3069.977630]  output_poll_execute+0x8d/0x180
      <4>[ 3069.977635]  process_one_work+0x22e/0x660
      <4>[ 3069.977640]  worker_thread+0x48/0x3a0
      <4>[ 3069.977644]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
      <4>[ 3069.977649]  kthread+0x102/0x140
      <4>[ 3069.977653]  ? process_one_work+0x660/0x660
      <4>[ 3069.977657]  ? kthread_create_on_node+0x40/0x40
      <4>[ 3069.977662]  ret_from_fork+0x27/0x40
      <4>[ 3069.977666] Code: 8d 62 f8 c3 49 81 3c 24 e0 fa 3c 82 41 be 00 00 00 00 45 0f 45 f0 83 fe 01 77 86 89 f0 49 8b 44 c4 08 48 85 c0 0f 84 76 ff ff ff <f0> ff 80 38 01 00 00 8b 1d 62 f9 e8 01 45 8b 85 b8 08 00 00 85
      <1>[ 3069.977707] RIP: __lock_acquire+0x109/0x1b60 RSP: ffffc90001fe7bb0
      <4>[ 3069.977712] ---[ end trace 4ad012eb3af62df7 ]---
      
      In order to keep the dev_priv->ifbdev alive after failure, we have to
      avoid the free and leave it empty until we unload the module (which is
      less than ideal, but a necessary evil for simplicity). Then we can use
      intel_fbdev_sync() to serialise the hotplug event with the configuration.
      The serialisation between the two was removed in commit 934458c2
      ("Revert "drm/i915: Fix races on fbdev""), but the use after free is much
      older, commit 366e39b4 ("drm/i915: Tear down fbdev if initialization
      fails")
      
      Fixes: 366e39b4 ("drm/i915: Tear down fbdev if initialization fails")
      Fixes: 934458c2 ("Revert "drm/i915: Fix races on fbdev"")
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: Lukas Wunner <lukas@wunner.de>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarLukas Wunner <lukas@wunner.de>
      Link: https://patchwork.freedesktop.org/patch/msgid/20171125194155.355-1-chris@chris-wilson.co.uk
      ad88d7fc