Avoid the goto from the rx error handling branch into the else branch,
and in general avoid having the main rx work in the else branch.
In addition ensure proper reverse xmas tree order of variables in the
for loop.

No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to %pM instead of using custom code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Christoph Hellwig says:

====================
move the SIOCDELRT and SIOCADDRT compat_ioctl handlers v3

this series moves the compat_ioctl handlers into the protocol handlers,
avoiding the need to override the address space limited as in the current
handler.

Changes since v3:
 - moar variable reordering

Changes since v1:
 - reorder a bunch of variable declarations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

To prepare removing the global routing_ioctl hack start lifting the code
into the ipv4 and appletalk ->compat_ioctl handlers.  Unlike the existing
handler we don't bother copying in the name - there are no compat issues for
char arrays.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper than can be shared with the upcoming compat ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

To prepare removing the global routing_ioctl hack start lifting the code
into a newly added ipv6 ->compat_ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for better compat ioctl handling by moving the user copy out
of ipv6_route_ioctl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function was introduced to allow for different handling of
link up and link down events particularly with regard to the
netif_carrier. The third argument do_carrier allowed the flag to
be left unchanged.

Since then the phylink has introduced an implementation that
completely ignores the third parameter since it never wants to
change the flag and the phylib always sets the third parameter
to true so the flag is always changed.

Therefore the third argument (i.e. do_carrier) is no longer
necessary and can be removed. This also means that the phylib
phy_link_down() function no longer needs its second argument.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code was using get_user_pages_fast(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages_fast() + put_page() calls to
pin_user_pages_fast() + unpin_user_pages() calls.

There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.

[1] Documentation/core-api/pin_user_pages.rst

[2] "Explicit pinning of user-space pages":
    https://lwn.net/Articles/807108/

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: rds-devel@oss.oracle.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
mptcp: do not block on subflow socket

This series reworks mptcp_sendmsg logic to avoid blocking on the subflow
socket.

It does so by removing the wait loop from mptcp_sendmsg_frag helper.

In order to do that, it moves prerequisites that are currently
handled in mptcp_sendmsg_frag (and cause it to wait until they are
met, e.g. frag cache refill) into the callers.

The worker can just reschedule in case no subflow socket is ready,
since it can't wait -- doing so would block other work items and
doesn't make sense anyway because we should not (re)send data
in case resources are already low.

The sendmsg path can use the existing wait logic until memory
becomes available.

Because large send requests can result in multiple mptcp_sendmsg_frag
calls from mptcp_sendmsg, we may need to restart the socket lookup in
case subflow can't accept more data or memory is low.

Doing so blocks on the mptcp socket, and existing wait handling
releases the msk lock while blocking.

Lastly, no need to use GFP_ATOMIC for extension allocation:
extend __skb_ext_alloc with gfp_t arg instead of hard-coded ATOMIC and
then relax the allocation constraints for mptcp case: those requests
occur in process context.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp calls this from the transmit side, from process context.
Allow a sleeping allocation instead of unconditional GFP_ATOMIC.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

previous patches made sure we only call into this function
when these prerequisites are met, so no need to wait on the
subflow socket anymore.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/7Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mptcp_sendmsg_frag helper contains a loop that will wait on the
subflow sk.

It seems preferrable to only wait in mptcp_sendmsg() when blocking io is
requested.  mptcp_sendmsg already has such a wait loop that is used when
no subflow socket is available for transmission.

This is another preparation patch that makes sure we call
mptcp_sendmsg_frag only if the page frag cache has been refilled.

Followup patch will remove the wait loop from mptcp_sendmsg_frag().

The retransmit worker doesn't need to do this refill as it won't
transmit new mptcp-level data.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mptcp_sendmsg_frag helper contains a loop that will wait on the
subflow sk.

It seems preferrable to only wait in mptcp_sendmsg() when blocking io is
requested.  mptcp_sendmsg already has such a wait loop that is used when
no subflow socket is available for transmission.

This is a preparation patch that makes sure we call
mptcp_sendmsg_frag only if a skb extension has been allocated.

Moreover, such allocation currently uses GFP_ATOMIC while it
could use sleeping allocation instead.

Followup patches will remove the wait loop from mptcp_sendmsg_frag()
and will allow to do a sleeping allocation for the extension.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The transmit loop continues to xmit new data until an error is returned
or all data was transmitted.

For the blocking i/o case, this means that tcp_sendpages() may block on
the subflow until more space becomes available, i.e. we end up sleeping
with the mptcp socket lock held.

Instead we should check if a different subflow is ready to be used.

This restarts the subflow sk lookup when the tx operation succeeded
and the tcp subflow can't accept more data or if tcp_sendpages
indicates -EAGAIN on a blocking mptcp socket.

In that case we also need to set the NOSPACE bit to make sure we get
notified once memory becomes available.

In case all subflows are busy, the existing logic will wait until a
subflow is ready, releasing the mptcp socket lock while doing so.

The mptcp worker already sets DONTWAIT, so no need to make changes there.

v2:
 * set NOSPACE bit
 * add a comment to clarify that mptcp-sk sndbuf limits need to
   be checked as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Its not enough to check for available tcp send space.

We also hold on to transmitted data for mptcp-level retransmits.
Right now we will send more and more data if the peer can ack data
at the tcp level fast enough, since that frees up tcp send buffer space.

But we also need to check that data was acked and reclaimed at the mptcp
level.

Therefore add needed check in mptcp_sendmsg, flush tcp data and
wait until more mptcp snd space becomes available if we are over the
limit.  Before we wait for more data, also make sure we start the
retransmit timer if we ran out of sndbuf space.

Otherwise there is a very small chance that we wait forever:

 * receiver is waiting for data
 * sender is blocked because mptcp socket buffer is full
 * at tcp level, all data was acked
 * mptcp-level snd_una was not updated, because last ack
   that acknowledged the last data packet carried an older
   MPTCP-ack.

Restarting the retransmit timer avoids this problem: if TCP
subflow is idle, data is retransmitted from the RTX queue.

New data will make the peer send a new, updated MPTCP-Ack.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo noticed that ssk_check_wmem() has same pattern, so add/use
common helper for both places.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'pref medium' attribute was moved in iproute2 to be near the prefix
which is where it applies versus after the last nexthop. The nexthop
tests were updated to drop the string from route checking, but it crept
in again with the compat tests.

Fixes: 4dddb5be ("selftests: net: add new testcases for nexthop API compat mode sysctl")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: sc7180 suspend/resume

This series permits suspend/resume to work for the IPA driver
on the Qualcomm SC7180 SoC.  The IPA version on this SoC requires
interrupts to be enabled when the suspend and resume callbacks are
made, and the first patch moves away from using the noirq variants.
The second patch fixes a problem with resume that occurs because
pending interrupts were being cleared before starting a channel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In gsi_channel_start() there is harmless-looking comment "Clear the
channel's event ring interrupt in case it's pending".  The intent
was to avoid getting spurious interrupts when first bringing up a
channel.

However we now use channel stop/start to implement suspend and
resume, and an interrupt pending at the time we resume is actually
something we don't want to ignore.

The very first time we bring up the channel we do not expect an
interrupt to be pending, and even if it were, the effect would
simply be to schedule NAPI on that channel, which would find nothing
to do, which is not a problem.

Stop clearing any pending IEOB interrupt in gsi_channel_start().
That leaves one caller of the trivial function gsi_isr_ieob_clear().
Get rid of that function and just open-code it in gsi_isr_ieob()
instead.

This fixes a problem where suspend/resume IPA v4.2 would get stuck
when resuming after a suspend.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the suspend and resume callbacks rather than suspend_noirq and
resume_noirq.  With IPA v4.2, we use the CHANNEL_STOP command to
implement a suspend, and without interrupts enabled, that command
won't complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Reorganize trap data

This patch set does not include any functional changes. It merely
reworks the internal storage of traps, trap groups and trap policers in
mlxsw to each use a single array.

These changes allow us to get rid of the multiple arrays we currently
have for traps, which make the trap data easier to validate and extend
with more per-trap information in the future. It will also allow us to
more easily add per-ASIC traps in future submissions.

Last two patches include minor changes to devlink-trap selftests.

Tested with existing devlink-trap selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It can be derived dynamically from the trap's name, so drop it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One blank line is enough.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each trap registered with devlink is mapped to one or more Rx listeners.
These listeners allow the switch driver (e.g., mlxsw_spectrum) to
register a function that is called when a packet is received (trapped)
for a specific reason.

Currently, three arrays are used to describe the mapping between the
logical devlink traps and the Rx listeners.

Instead, get rid of these arrays and store all the information in one
array that is easier to validate and extend with more per-trap
information.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use one array to store all the information about all the trap groups
instead of hard coding it in code. This will be used in future patches
to disable certain functionality (e.g., policer binding) on a trap group
basis.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of maintaining an array of policers and a linked list, only
maintain an array.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'struct mlxsw_sp_trap_policer_item' is only used in one file, so move it
there.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After having switched to devm_mdiobus_register() also this remaining
call to mdiobus_unregister() can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: set_channels: add a few more checks

There seems to be a few more things we can check in the core before
we call drivers' ethtool_ops->set_channels. Adding the checks to
the core simplifies the drivers. This set only includes changes
to the NFP driver as an example.

There is a small risk in the first patch that someone actually
purposefully accepts a strange configuration without RX or TX
channels, but I couldn't find such a driver in the tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't call drivers if nothing changed. Netlink code already
contains this logic.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Core will now perform this check.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Having a channel config with no ability to RX or TX traffic is
clearly wrong. Check for this in the core so the drivers don't
have to.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not
sending 64-bit data-sequence numbers. The 64-bit DSN is only there for
extreme scenarios when a very high throughput subflow is combined with a
long-RTT subflow such that the high-throughput subflow wraps around the
32-bit sequence number space within an RTT of the high-RTT subflow.

It is thus a rare scenario and we should try to use the 32-bit DATA_ACK
instead as long as possible. It allows to reduce the TCP-option overhead
by 4 bytes, thus makes space for an additional SACK-block. It also makes
tcpdumps much easier to read when the DSN and DATA_ACK are both either
32 or 64-bit.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The goal is to be able to inherit the initial devconf parameters from the
current netns, ie the netns where this new netns has been created.

This is useful in a containers environment where /proc/sys is read only.
For example, if a pod is created with specifics devconf parameters and has
the capability to create netns, the user expects to get the same parameters
than his 'init_net', which is not the real init_net in this case.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add driver level bulking to the XDP_TX action.

An array of frame descriptors is held for each Tx frame queue and
populated accordingly when the action returned by the XDP program is
XDP_TX. The frames will be actually enqueued only when the array is
filled. At the end of the NAPI cycle a flush on the queued frames is
performed in order to enqueue the remaining FDs.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes checkpatch happy for tabs
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2020-05-15

mlx5 core and mlx5e (netdev) updates:

1) Two fixes for release all FW pages support.
2) Improvement in calculating the send queue stop room on tx
3) Flow steering auto-groups creation improvements
4) TC offload fix for Connection tracking with NAT action
5) IPoIB support for self looback to allow communication between ipoib
pkey child interfaces on the same host.
6) DCBNL cleanup to avoid #ifdef DCBNL all over the main mlx5e code
7) Small and trivial code cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When building with Clang:

In file included from drivers/net/ethernet/ti/am65-cpsw-ethtool.c:15:
drivers/net/ethernet/ti/am65-cpts.h:58:12: warning: unused function
'am65_cpts_ns_gettime' [-Wunused-function]
static s64 am65_cpts_ns_gettime(struct am65_cpts *cpts)
           ^
drivers/net/ethernet/ti/am65-cpts.h:63:12: warning: unused function
'am65_cpts_estf_enable' [-Wunused-function]
static int am65_cpts_estf_enable(struct am65_cpts *cpts,
           ^
drivers/net/ethernet/ti/am65-cpts.h:69:13: warning: unused function
'am65_cpts_estf_disable' [-Wunused-function]
static void am65_cpts_estf_disable(struct am65_cpts *cpts, int idx)
            ^
3 warnings generated.

These functions need to be marked as inline, which adds __maybe_unused,
to avoid these warnings, which is the pattern for stub functions.

Fixes: ec008fa2 ("ethernet: ti: am65-cpts: add routines to support taprio offload")
Link: https://github.com/ClangBuiltLinux/linux/issues/1026Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>