* pm-cpufreq:
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies

* acpi-general:
  ACPI: Fix bug when ACPI reset register is implemented in system memory

* acpi-video:
  ACPI / video: Change the default for video.use_native_backlight to 1

* acpi-hotplug:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges

After relatively recent changes in the ACPI-based PCI hotplug
(ACPIPHP) code, the acpiphp_check_host_bridge() executed for PCI
host bridges via acpi_pci_root_scan_dependent() doesn't do anything
useful, because those bridges do not have hotplug contexts.  That
happens by mistake, so fix it by making acpiphp_enumerate_slots()
add hotplug contexts to PCI host bridges too and modify
acpiphp_remove_slots() to drop those contexts for host bridges
as appropriate.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76901
Fixes: 2d8b1d56 (ACPI / hotplug / PCI: Get rid of check_sub_bridges())
Reported-and-tested-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq-cpu0 uses thermal framework to register a cooling device, but doesn't
depend on it as there are dummy calls provided by thermal layer when
CONFIG_THERMAL=n. And when these calls fail, the driver is still usable.

Similar explanation is valid for regulators as well. We do have dummy calls
available for regulator APIs and the driver can work even when those calls
fail.

So, we don't really need to mention thermal and regulators as a dependency for
cpufreq-cpu0 in Kconfig as platforms without support for thermal/regulator can
also use this driver. Remove this dependency.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Tegra's driver got updated a bit (00917ddc cpufreq: Tegra: implement intermediate
frequency callbacks) and implements new 'intermediate freq' infrastructure of
core. Above commit updated comments about when to call
clk_prepare_enable(pll_x_clk) and Doug wasn't satisfied with those comments and
said this:

> The "Though when target-freq is intermediate freq, we don't need to
> take this reference." makes me think that this function is actually
> called when target-freq is intermediate freq.  I don't think it is,
> right?

For better clarity just make that comment more explicit about when we call
tegra_target_intermediate().
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reported-and-reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

We check the CPU ID during driver init. There is no need
to do it again per logical CPU initialization.

So, remove the duplicate check.
Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Sometimes boot loaders set CPU frequency to a value outside of frequency table
present with cpufreq core. In such cases CPU might be unstable if it has to run
on that frequency for long duration of time and so its better to set it to a
frequency which is specified in frequency table.

Sachin recently found this problem with cpufreq-cpu0 driver when he was testing
it for Exynos.

Set this flag for cpufreq-cpu0 driver.
Reported-and-tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Extend the year to 2014 in the copyright.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

'copy_prev_load' was recently added by commit: 18b46abd (cpufreq: governor: Be
friendly towards latency-sensitive bursty workloads).

It actually is a bit redundant as we also have 'prev_load' which can store any
integer value and can be used instead of 'copy_prev_load' by setting it zero.

True load can also turn out to be zero during long idle intervals (and hence the
actual value of 'prev_load' and the overloaded value can clash). However this is
not a problem because, if the true load was really zero in the previous
interval, it makes sense to evaluate the load afresh for the current interval
rather than copying the previous load.

So, drop 'copy_prev_load' and use 'prev_load' instead.

Update comments as well to make it more clear.

There is another change here which was probably missed by Srivatsa during the
last version of updates he made. The unlikely in the 'if' statement was covering
only half of the condition and the whole line should actually come under it.

Also checkpatch is made more silent as it was reporting this (--strict option):

CHECK: Alignment should match open parenthesis
+		if (unlikely(wall_time > (2 * sampling_rate) &&
+						j_cdbs->prev_load)) {
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Cpufreq governors like the ondemand governor calculate the load on the CPU
periodically by employing deferrable timers. A deferrable timer won't fire
if the CPU is completely idle (and there are no other timers to be run), in
order to avoid unnecessary wakeups and thus save CPU power.

However, the load calculation logic is agnostic to all this, and this can
lead to the problem described below.

Time (ms)               CPU 1

100                Task-A running

110                Governor's timer fires, finds load as 100% in the last
                   10ms interval and increases the CPU frequency.

110.5              Task-A running

120		   Governor's timer fires, finds load as 100% in the last
		   10ms interval and increases the CPU frequency.

125		   Task-A went to sleep. With nothing else to do, CPU 1
		   went completely idle.

200		   Task-A woke up and started running again.

200.5		   Governor's deferred timer (which was originally programmed
		   to fire at time 130) fires now. It calculates load for the
		   time period 120 to 200.5, and finds the load is almost zero.
		   Hence it decreases the CPU frequency to the minimum.

210		   Governor's timer fires, finds load as 100% in the last
		   10ms interval and increases the CPU frequency.

So, after the workload woke up and started running, the frequency was suddenly
dropped to absolute minimum, and after that, there was an unnecessary delay of
10ms (sampling period) to increase the CPU frequency back to a reasonable value.
And this pattern repeats for every wake-up-from-cpu-idle for that workload.
This can be quite undesirable for latency- or response-time sensitive bursty
workloads. So we need to fix the governor's logic to detect such wake-up-from-
cpu-idle scenarios and start the workload at a reasonably high CPU frequency.

One extreme solution would be to fake a load of 100% in such scenarios. But
that might lead to undesirable side-effects such as frequency spikes (which
might also need voltage changes) especially if the previous frequency happened
to be very low.

We just want to avoid the stupidity of dropping down the frequency to a minimum
and then enduring a needless (and long) delay before ramping it up back again.
So, let us simply carry forward the previous load - that is, let us just pretend
that the 'load' for the current time-window is the same as the load for the
previous window. That way, the frequency and voltage will continue to be set
to whatever values they were set at previously. This means that bursty workloads
will get a chance to influence the CPU frequency at which they wake up from
cpu-idle, based on their past execution history. Thus, they might be able to
avoid suffering from slow wakeups and long response-times.

However, we should take care not to over-do this. For example, such a "copy
previous load" logic will benefit cases like this: (where # represents busy
and . represents idle)

##########.........#########.........###########...........##########........

but it will be detrimental in cases like the one shown below, because it will
retain the high frequency (copied from the previous interval) even in a mostly
idle system:

##########.........#.................#.....................#...............

(i.e., the workload finished and the remaining tasks are such that their busy
periods are smaller than the sampling interval, which causes the timer to
always get deferred. So, this will make the copy-previous-load logic copy
the initial high load to subsequent idle periods over and over again, thus
keeping the frequency high unnecessarily).

So, we modify this copy-previous-load logic such that it is used only once
upon every wakeup-from-idle. Thus if we have 2 consecutive idle periods, the
previous load won't get blindly copied over; cpufreq will freshly evaluate the
load in the second idle interval, thus ensuring that the system comes back to
its normal state.

[ The right way to solve this whole problem is to teach the CPU frequency
governors to also track load on a per-task basis, not just a per-CPU basis,
and then use both the data sources intelligently to set the appropriate
frequency on the CPUs. But that involves redesigning the cpufreq subsystem,
so this patch should make the situation bearable until then. ]

Experimental results:
+-------------------+

I ran a modified version of ebizzy (called 'sleeping-ebizzy') that sleeps in
between its execution such that its total utilization can be a user-defined
value, say 10% or 20% (higher the utilization specified, lesser the amount of
sleeps injected). This ebizzy was run with a single-thread, tied to CPU 8.

Behavior observed with tracing (sample taken from 40% utilization runs):
------------------------------------------------------------------------

Without patch:
~~~~~~~~~~~~~~
kworker/8:2-12137  416.335742: cpu_frequency: state=2061000 cpu_id=8
kworker/8:2-12137  416.335744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40753  416.345741: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-12137  416.345744: cpu_frequency: state=4123000 cpu_id=8
kworker/8:2-12137  416.345746: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40753  416.355738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
<snip>  ---------------------------------------------------------------------  <snip>
      <...>-40753  416.402202: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8
     <idle>-0      416.502130: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy
      <...>-40753  416.505738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-12137  416.505739: cpu_frequency: state=2061000 cpu_id=8
kworker/8:2-12137  416.505741: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40753  416.515739: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-12137  416.515742: cpu_frequency: state=4123000 cpu_id=8
kworker/8:2-12137  416.515744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy

Observation: Ebizzy went idle at 416.402202, and started running again at
416.502130. But cpufreq noticed the long idle period, and dropped the frequency
at 416.505739, only to increase it back again at 416.515742, realizing that the
workload is in-fact CPU bound. Thus ebizzy needlessly ran at the lowest frequency
for almost 13 milliseconds (almost 1 full sample period), and this pattern
repeats on every sleep-wakeup. This could hurt latency-sensitive workloads quite
a lot.

With patch:
~~~~~~~~~~~

kworker/8:2-29802  464.832535: cpu_frequency: state=2061000 cpu_id=8
<snip>  ---------------------------------------------------------------------  <snip>
kworker/8:2-29802  464.962538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40738  464.972533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-29802  464.972536: cpu_frequency: state=4123000 cpu_id=8
kworker/8:2-29802  464.972538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40738  464.982531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
<snip>  ---------------------------------------------------------------------  <snip>
kworker/8:2-29802  465.022533: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40738  465.032531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-29802  465.032532: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40738  465.035797: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8
     <idle>-0      465.240178: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy
      <...>-40738  465.242533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2
kworker/8:2-29802  465.242535: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy
      <...>-40738  465.252531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2

Observation: Ebizzy went idle at 465.035797, and started running again at
465.240178. Since ebizzy was the only real workload running on this CPU,
cpufreq retained the frequency at 4.1Ghz throughout the run of ebizzy, no
matter how many times ebizzy slept and woke-up in-between. Thus, ebizzy
got the 10ms worth of 4.1 Ghz benefit during every sleep-wakeup (as compared
to the run without the patch) and this boost gave a modest improvement in total
throughput, as shown below.

Sleeping-ebizzy records-per-second:
-----------------------------------

Utilization  Without patch  With patch  Difference (Absolute and % values)
    10%         274767        277046        +  2279 (+0.829%)
    20%         543429        553484        + 10055 (+1.850%)
    40%        1090744       1107959        + 17215 (+1.578%)
    60%        1634908       1662018        + 27110 (+1.658%)

A rudimentary and somewhat approximately latency-sensitive workload such as
sleeping-ebizzy itself showed a consistent, noticeable performance improvement
with this patch. Hence, workloads that are truly latency-sensitive will benefit
quite a bit from this change. Moreover, this is an overall win-win since this
patch does not hurt power-savings at all (because, this patch does not reduce
the idle time or idle residency; and the high frequency of the CPU when it goes
to cpu-idle does not affect/hurt the power-savings of deep idle states).
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 6712d293 (cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost
error) used the remainder from do_div instead of the quotient.  Fix that
and add one to ensure minimum is met.

Fixes: 6712d293 (cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error)
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 4920ab84 (cpufreq: Enable big.LITTLE cpufreq
driver on arm64) that breaks build on arm64.

Fixes: 4920ab84 (cpufreq: Enable big.LITTLE cpufreq driver on arm64)
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Tegra has been switching to intermediate frequency (pll_p_clk) forever.
CPUFreq core has better support for handling notifications for these
frequencies and so we can adapt Tegra's driver to it.

Also do a WARN() if clk_set_parent() fails while moving back to pll_x
as we should have atleast restored to earlier frequency on error.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Douglas Anderson, recently pointed out an interesting problem due to which
udelay() was expiring earlier than it should.

While transitioning between frequencies few platforms may temporarily switch to
a stable frequency, waiting for the main PLL to stabilize.

For example: When we transition between very low frequencies on exynos, like
between 200MHz and 300MHz, we may temporarily switch to a PLL running at 800MHz.
No CPUFREQ notification is sent for that. That means there's a period of time
when we're running at 800MHz but loops_per_jiffy is calibrated at between 200MHz
and 300MHz. And so udelay behaves badly.

To get this fixed in a generic way, introduce another set of callbacks
get_intermediate() and target_intermediate(), only for drivers with
target_index() and CPUFREQ_ASYNC_NOTIFICATION unset.

get_intermediate() should return a stable intermediate frequency platform wants
to switch to, and target_intermediate() should set CPU to that frequency,
before jumping to the frequency corresponding to 'index'. Core will take care of
sending notifications and driver doesn't have to handle them in
target_intermediate() or target_index().

NOTE: ->target_index() should restore to policy->restore_freq in case of
failures as core would send notifications for that.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that we're hoping to have resolved all of the problems with
video.use_native_backlight=1, make that the default at last.

Link: http://marc.info/?l=linux-acpi&m=139716088401106&w=2Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Use acpi_os_map_generic_address to pre-map the reset register if it is
memory mapped, thereby preventing the BUG_ON() in line 1319 of
mm/vmalloc.c from triggering during panic-triggered reboots.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131Signed-off-by: Randy Wright <rwright@hp.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
[rjw: Changelog, simplified code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...

Pull HID patches from Jiri Kosina:
 - RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew
   Duggan and Jiri Kosina
 - cleanup of hid-sony driver and improved support for Sixaxis and
   Dualshock 4, by Frank Praznik
 - other usual small fixes and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
  HID: thingm: thingm_fwinfo[] doesn't need to be global
  HID: core: add two new usages for digitizer
  HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
  HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
  HID: hid-sensor-hub: Set report quirk for Microsoft Surface
  HID: debug: add labels for HID Sensor Usages
  HID: uhid: Use kmemdup instead of kmalloc + memcpy
  HID: rmi: do not handle touchscreens through hid-rmi
  HID: quirk for Saitek RAT7 and MMO7 mices' mode button
  HID: core: fix validation of report id 0
  HID: rmi: fix masks for x and w_x data
  HID: rmi: fix wrong struct field name
  HID: rmi: do not fetch more than 16 bytes in a query
  HID: rmi: check for the existence of some optional queries before reading query 12
  HID: i2c-hid: hid report descriptor retrieval changes
  HID: add missing hid usages
  HID: hid-sony - allow 3rd party INTEC controller to turn off all leds
  HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs
  HID: sony: Initialize the controller LEDs with a device ID value
  HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string
  ...

Pull trivial tree changes from Jiri Kosina:
 "Usual pile of patches from trivial tree that make the world go round"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  staging: go7007: remove reference to CONFIG_KMOD
  aic7xxx: Remove obsolete preprocessor define
  of: dma: doc fixes
  doc: fix incorrect formula to calculate CommitLimit value
  doc: Note need of bc in the kernel build from 3.10 onwards
  mm: Fix printk typo in dmapool.c
  modpost: Fix comment typo "Modules.symvers"
  Kconfig.debug: Grammar s/addition/additional/
  wimax: Spelling s/than/that/, wording s/destinatary/recipient/
  aic7xxx: Spelling s/termnation/termination/
  arm64: mm: Remove superfluous "the" in comment
  of: Spelling s/anonymouns/anonymous/
  dma: imx-sdma: Spelling s/determnine/determine/
  ath10k: Improve grammar in comments
  ath6kl: Spelling s/determnine/determine/
  of: Improve grammar for of_alias_get_id() documentation
  drm/exynos: Spelling s/contro/control/
  radio-bcm2048.c: fix wrong overflow check
  doc: printk-formats: do not mention casts for u64/s64
  doc: spelling error changes
  ...

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

Pull jfs changes from Dave Kleikamp.

* tag 'jfs-3.16' of git://github.com/kleikamp/linux-shaggy:
  fs/jfs/super.c: convert simple_str to kstr
  fs/jfs/jfs_dmap.c: replace min/casting by min_t
  fs/jfs/super.c: remove 0 assignment to static + code clean-up
  fs/jfs/jfs_logmgr.c: remove NULL assignment on static
  JFS: Check for NULL before calling posix_acl_equiv_mode()
  fs/jfs/jfs_inode.c: atomically set inode->i_flags

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next

Pull gfs2 updates from Steven Whitehouse:
 "This must be about the smallest merge window patch set ever for GFS2.
  It is probably also the first one without a single patch from me.
  That is down to a combination of factors, and I have some things in
  the works that are not quite ready yet, that I hope to put in next
  time around.

  Returning to what is here this time...  we have 3 patches which fix
  various warnings.  Two are bug fixes (for quotas and also a rare
  recovery race condition).  The final patch, from Ben Marzinski, is an
  important change in the freeze code which has been in progress for
  some time.  This removes the need to take and drop the transaction
  lock for every single transaction, when the only time it was used, was
  at file system freeze time.  Ben's patch integrates the freeze
  operation into the journal flush code as an alternative with lower
  overheads and also lands up resolving some difficult to fix races at
  the same time"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Prevent recovery before the local journal is set
  GFS2: fs/gfs2/file.c: kernel-doc warning fixes
  GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
  GFS2: remove transaction glock
  GFS2: lops.c: replace 0 by NULL for pointers
  GFS2: quotas not being refreshed in gfs2_adjust_quota

Pull file locking changes from Jeff Layton:
 "Pretty quiet on the file-locking related front this cycle.  Just some
  small cleanups and the addition of some tracepoints in the lease
  handling code"

* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
  locks: add some tracepoints in the lease handling code
  fs/locks.c: replace seq_printf by seq_puts
  locks: ensure that fl_owner is always initialized properly in flock and lease codepaths

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next

Pull firewire updates from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA
  controllers, one fix, one kconfig brushup"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
  firewire: Use COMPILE_TEST for build testing
  firewire: net: fix NULL derefencing in fwnet_probe()

The newly merged versatile sched clock support uses a deprecated
interface.  Of course that patch got routed through the ARM tree instead
of going through the relevant maintainer tree.

Use the proper interface so we can get rid of the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' and 'for-3.16/thingm' into for-linus

Conflicts:
	drivers/hid/hid-sensor-hub.c

Pull x86/UV changes from Ingo Molnar:
 "Continued updates for SGI UV 3 hardware support"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Fix conditional in gru_exit()
  x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3

Pull x86 RAS changes from Ingo Molnar:
 "Improve mcheck device initialization and bootstrap robustness"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mce: Panic when a core has reached a timeout
  x86/mce: Improve mcheck_init_device() error handling

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 IOSF platform updates from Ingo Molnar:
 "IOSF (Intel OnChip System Fabric) updates:

   - generalize the IOSF interface to allow mixed mode drivers: non-IOSF
     drivers to utilize of IOSF features on IOSF platforms.

   - add 'Quark X1000' IOSF/MBI support

   - clean up BayTrail and Quark PCI ID enumeration"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, iosf: Add PCI ID macros for better readability
  x86, iosf: Add Quark X1000 PCI ID
  x86, iosf: Added Quark MBI identifiers
  x86, iosf: Make IOSF driver modular and usable by more drivers

Pull x86 mm update from Ingo Molnar:

 - speed up 256 GB PCI BAR ioremap()s

 - speed up PTE swapout page reclaim case

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ioremap: Speed up check for RAM pages
  x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 microcode changes from Ingo Molnar:
 "A microcode-debugging boot flag plus related refactoring"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Add a disable chicken bit
  x86, boot: Carve out early cmdline parsing function

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 irq cleanup from Ingo Molnar:
 "A single, trivial cleanup"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Clean up VECTOR_UNDEFINED and VECTOR_RETRIGGERED definition

Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 build cleanups from Ingo Molnar:
 "Two small build related cleanups"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Supress realmode.bin is up to date message
  compiler-intel.h: Remove duplicate definition

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 boot changes from Ingo Molnar:
 "Two small cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Remove misc.h inclusion from compressed/string.c
  x86, boot: Do not include boot.h in string.c

Pull x86 asm cleanups from Ingo Molnar:
 "A handful of entry_64.S cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64, entry: Merge paranoidzeroentry_ist into idtentry
  x86_64, entry: Merge most 64-bit asm entry macros
  x86_64, entry: Add missing 'DEFAULT_FRAME 0' entry annotations

* acpi-tools:
  ACPI / tools: Introduce ec_access.c - tool to access the EC

* pm-tools:
  cpupower: Remove mc and smt power aware scheduler info/settings
  cpupower: cpupower info -b should return 0 on success, not the perf bias value
  cpupower: If root, try to load msr driver on x86 if /dev/cpu/0/msr is not available
  cpupower: Install recently added cpupower-idle-{set, info} manpages
  cpupower: Introduce idle state disable-by-latency and enable-all
  cpupower: Remove all manpages on make uninstall
  cpupower: Remove dead link to homepage, and update the targets built.
  cpupower: Rename cpufrequtils -> cpupower, and libcpufreq -> libcpupower.
  PM / tools: cpupower: add option to display values without round offs
  tools / power: turbostat: Drop temperature checks

* pm-cpufreq: (28 commits)
  cpufreq: handle calls to ->target_index() in separate routine
  cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE
  cpufreq: intel_pstate: Remove unused member name of cpudata
  cpufreq: Break out early when frequency equals target_freq
  cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed()
  cpufreq: imx6q: Remove unused include
  cpufreq: imx6q: Drop devm_clk/regulator_get usage
  cpufreq: powernow-k8: Suppress checkpatch warnings
  cpufreq: powernv: make local function static
  cpufreq: Enable big.LITTLE cpufreq driver on arm64
  cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro
  intel_pstate: Add CPU IDs for Broadwell processors
  cpufreq: Fix build error on some platforms that use cpufreq_for_each_*
  PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
  PM / OPP: Remove cpufreq wrapper dependency on internal data organization
  cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end
  intel_pstate: Remove sample parameter in intel_pstate_calc_busy
  cpufreq: Kconfig: Fix spelling errors
  cpufreq: Make linux-pm@vger.kernel.org official mailing list
  cpufreq: exynos: Use dev_err/info function instead of pr_err/info
  ...

* pm-devfreq:
  PM / devfreq: remove checks for CONFIG_EXYNOS_ASV
  PM / devfreq: exynos5: Use devm_devfreq_* function using device resource management
  PM / devfreq: exynos4: Use devm_devfreq_* function using device resource management
  PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier function
  PM / devfreq: Add resource-managed function for devfreq device
  PM / devfreq: Fix devfreq_remove_device() to improve the sequence of resource free
  PM / devfreq: exynos: make more PPMU code common
  PM / devfreq: exynos5: introduce struct busfreq_ppmu_data
  PM / devfreq: exynos4: introduce struct busfreq_ppmu_data
  PM / devfreq: exynos4: use common PPMU code
  PM / devfreq: exynos5: Add CONFIG_PM_OPP dependency to fix probe fail
  PM / devfreq: exynos5: Use SIMPLE_DEV_PM_OPS macro
  PM / devfreq: exynos4: Add CONFIG_PM_OPP dependency to fix probe fail
  PM / devfreq: exynos4: Use SIMPLE_DEV_PM_OPS macro
  PM / devfreq: exynos4: Fix bug of resource leak and code clean on probe()