- 03 Mar, 2013 40 commits
-
-
James Ralston authored
commit 151743fd upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Heasley authored
commit 29e674dd upstream. This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
-
James Ralston authored
commit 3aee8bc5 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by:
-
Seth Heasley authored
commit aaa51527 upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
-
Ian Abbott authored
commit cc400e18 upstream. Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or `dev->write_subdev` to a subdevice that does not support asynchronous commands. Comedi's poll(), read() and write() file operation handlers assume these subdevices do support asynchronous commands. In particular, they assume `s->async` is valid (where `s` points to the read or write subdevice), which it won't be if it has been set incorrectly. This can lead to a NULL pointer dereference. Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and `comedi_write()` to avoid the bug. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Joseph Salisbury authored
commit 66f2fda9 upstream. This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume properly. References: http://bugs.launchpad.net/bugs/1113547Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rajanikanth H.V authored
commit eeb0751c upstream. Power supply subsystem creates thermal zone device for the property 'POWER_SUPPLY_PROP_TEMP' which requires thermal subsystem to be ready before 'ab8500 battery temperature monitor' driver is initialized. ab8500 btemp driver is initialized with subsys_initcall whereas thermal subsystem is initialized with fs_initcall which causes thermal_zone_device_register(...) to crash since the required structure 'thermal_class' is not initialized yet: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 pgd = c0004000 [000000a4] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.8.0-rc4-00001-g632fda8-dirty #1) PC is at _raw_spin_lock+0x18/0x54 LR is at get_device_parent+0x50/0x1b8 pc : [<c02f1dd0>] lr : [<c01cb248>] psr: 60000013 sp : ef04bdc8 ip : 00000000 fp : c0446180 r10: ef216e38 r9 : c03af5d0 r8 : ef275c18 r7 : 00000000 r6 : c0476c14 r5 : ef275c18 r4 : ef095840 r3 : ef04a000 r2 : 00000001 r1 : 00000000 r0 : 000000a4 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 0000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xef04a238) Stack: (0xef04bdc8 to 0xef04c000) [...] [<c02f1dd0>] (_raw_spin_lock+0x18/0x54) from [<c01cb248>] (get_device_parent+0x50/0x1b8) [<c01cb248>] (get_device_parent+0x50/0x1b8) from [<c01cb8d8>] (device_add+0xa4/0x574) [<c01cb8d8>] (device_add+0xa4/0x574) from [<c020b91c>] (thermal_zone_device_register+0x118/0x938) [<c020b91c>] (thermal_zone_device_register+0x118/0x938) from [<c0202030>] (power_supply_register+0x170/0x1f8) [<c0202030>] (power_supply_register+0x170/0x1f8) from [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) from [<c01cf0dc>] (platform_drv_probe+0x14/0x18) [<c01cf0dc>] (platform_drv_probe+0x14/0x18) from [<c01cde70>] (driver_probe_device+0x74/0x20c) [<c01cde70>] (driver_probe_device+0x74/0x20c) from [<c01ce094>] (__driver_attach+0x8c/0x90) [<c01ce094>] (__driver_attach+0x8c/0x90) from [<c01cc640>] (bus_for_each_dev+0x4c/0x80) [<c01cc640>] (bus_for_each_dev+0x4c/0x80) from [<c01cd6b4>] (bus_add_driver+0x16c/0x23c) [<c01cd6b4>] (bus_add_driver+0x16c/0x23c) from [<c01ce54c>] (driver_register+0x78/0x14c) [<c01ce54c>] (driver_register+0x78/0x14c) from [<c00086ac>] (do_one_initcall+0xfc/0x164) [<c00086ac>] (do_one_initcall+0xfc/0x164) from [<c02e89c8>] (kernel_init+0x120/0x2b8) [<c02e89c8>] (kernel_init+0x120/0x2b8) from [<c000e358>] (ret_from_fork+0x14/0x3c) Code: e3c3303f e5932004 e2822001 e5832004 (e1903f9f) ---[ end trace ed9df72941b5bada ]--- Signed-off-by:
Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by:
Anton Vorontsov <anton@enomsg.org> Signed-off-by:
-
Lee Jones authored
commit e3455002 upstream. Only root should have write permission on sysfs file ab8500_chargalg/chargalg. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
NeilBrown authored
commit bde83b9a upstream. commit a66f59ba bq27x00_battery: Add support for BQ27425 chip introduced 2 bugs. 1/ 'chip' was set to BQ27425 unconditionally - breaking support for other devices; 2/ BQ27425 does not support cycle count, how the code still tries to get the cycle count for BQ27425, and now does it twice for other chips. Signed-off-by:
NeilBrown <neilb@suse.de> Cc: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by:
-
Li Zefan authored
commit 71b5707e upstream. In cgroup_exit() put_css_set_taskexit() is called without any lock, which might lead to accessing a freed cgroup: thread1 thread2 --------------------------------------------- exit() cgroup_exit() put_css_set_taskexit() atomic_dec(cgrp->count); rmdir(); /* not safe !! */ check_for_release(cgrp); rcu_read_lock() can be used to make sure the cgroup is alive. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Li Zefan authored
commit 63f43f55 upstream. rename() will change dentry->d_name. The result of this race can be worse than seeing partially rewritten name, but we might access a stale pointer because rename() will re-allocate memory to hold a longer name. It's safe in the protection of dentry->d_lock. v2: check NULL dentry before acquiring dentry lock. Signed-off-by:
-
Seiji Aguchi authored
commit 9f244e9c upstream. [Issue] When pstore is in panic and emergency-restart paths, it may be blocked in those paths because it simply takes spin_lock. This is an example scenario which pstore may hang up in a panic path: - cpuA grabs psinfo->buf_lock - cpuB panics and calls smp_send_stop - smp_send_stop sends IRQ to cpuA - after 1 second, cpuB gives up on cpuA and sends an NMI instead - cpuA is now in an NMI handler while still holding buf_lock - cpuB is deadlocked This case may happen if a firmware has a bug and cpuA is stuck talking with it more than one second. Also, this is a similar scenario in an emergency-restart path: - cpuA grabs psinfo->buf_lock and stucks in a firmware - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer. And then, cpuB is deadlocked by taking psinfo->buf_lock again. [Solution] This patch avoids the deadlocking issues in both panic and emergency_restart paths by introducing a function, is_non_blocking_path(), to check if a cpu can be blocked in current path. With this patch, pstore is not blocked even if another cpu has taken a spin_lock, in those paths by changing from spin_lock_irqsave to spin_trylock_irqsave. In addition, according to a comment of emergency_restart() in kernel/sys.c, spin_lock shouldn't be taken in an emergency_restart path to avoid deadlock. This patch fits the comment below. <snip> /** * emergency_restart - reboot the system * * Without shutting down any hardware or taking any locks * reboot the system. This is called when we know we are in * trouble so this is our best effort to reboot. This is * safe to call in interrupt context. */ void emergency_restart(void) <snip> Signed-off-by:
Seiji Aguchi <seiji.aguchi@hds.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit a2c1c57b upstream. To avoid executing the same work item concurrenlty, workqueue hashes currently busy workers according to their current work items and looks up the the table when it wants to execute a new work item. If there already is a worker which is executing the new work item, the new item is queued to the found worker so that it gets executed only after the current execution finishes. Unfortunately, a work item may be freed while being executed and thus recycled for different purposes. If it gets recycled for a different work item and queued while the previous execution is still in progress, workqueue may make the new work item wait for the old one although the two aren't really related in any way. In extreme cases, this false dependency may lead to deadlock although it's extremely unlikely given that there aren't too many self-freeing work item users and they usually don't wait for other work items. To alleviate the problem, record the current work function in each busy worker and match it together with the work item address in find_worker_executing_work(). While this isn't complete, it ensures that unrelated work items don't interact with each other and in the very unlikely case where a twisted wq user triggers it, it's always onto itself making the culprit easy to spot. Signed-off-by:
Andrey Isakov <andy51@gmx.ru> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701 Cc: stable@vger.kernel.org
-
Miklos Szeredi authored
commit dfca7ceb upstream. drop_nlink() warns if nlink is already zero. This is triggerable by a buggy userspace filesystem. The cure, I think, is worse than the disease so disable the warning. Reported-by:
Tero Roponen <tero.roponen@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Fernando Luis Vázquez Cao authored
commit 99d24902 upstream. Document what the fix-up is does and make it more robust by ensuring that it is only applied to the USB interface that corresponds to the mouse (sony_report_fixup() is called once per interface during probing). Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Fernando Luis Vázquez Cao authored
commit a4649184 upstream. Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Signed-off-by:
-
J. Bruce Fields authored
commit cc630d9f upstream. Rewrite server shutdown to remove the assumption that there are no longer any threads running (no longer true, for example, when shutting down the service in one network namespace while it's still running in others). Do that by doing what we'd do in normal circumstances: just CLOSE each socket, then enqueue it. Since there may not be threads to handle the resulting queued xprts, also run a simplified version of the svc_recv() loop run by a server to clean up any closed xprts afterwards. Tested-by:
Jason Tibbitts <tibbs@math.uh.edu> Tested-by:
Paweł Sikora <pawel.sikora@agmk.net> Acked-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit e75bafbf upstream. svc_age_temp_xprts expires xprts in a two-step process: first it takes the sv_lock and moves the xprts to expire off their server-wide list (sv_tempsocks or sv_permsocks) to a local list. Then it drops the sv_lock and enqueues and puts each one. I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the sv_lock and sp_lock are not otherwise nested anywhere (and documentation at the top of this file claims it's correct to nest these with sp_lock inside.) Tested-by:
-
majianpeng authored
commit 2d32b29a upstream. When free nfs-client, it must free the ->cl_stateids. Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 304e220f upstream. ext4_has_free_clusters() should tell us whether there is enough free clusters to allocate, however number of free clusters in the file system is converted to blocks using EXT4_C2B() which is not only wrong use of the macro (we should have used EXT4_NUM_B2C) but it's also completely wrong concept since everything else is in cluster units. Moreover when calculating number of root clusters we should be using macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be off by one. However r_blocks_count should always be a multiple of the cluster ratio so doing a plain bit shift should be enough here. We avoid using EXT4_B2C() because it's confusing. As a result of the first problem number of free clusters is much bigger than it should have been and ext4_has_free_clusters() would return 1 even if there is really not enough free clusters available. Fix this by removing the EXT4_C2B() conversion of free clusters and using bit shift when calculating number of root clusters. This bug affects number of xfstests tests covering file system ENOSPC situation handling. With this patch most of the ENOSPC problems with bigalloc file system disappear, especially the errors caused by delayed allocation not having enough space when the actual allocation is finally requested. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Lukas Czerner authored
commit 1231b3a1 upstream. Currently when new xattr block is created or released we we would call dquot_free_block() or dquot_alloc_block() respectively, among the else decrementing or incrementing the number of blocks assigned to the inode by one block. This however does not work for bigalloc file system because we always allocate/free the whole cluster so we have to count with that in dquot_free_block() and dquot_alloc_block() as well. Use the clusters-to-blocks conversion EXT4_C2B() when passing number of blocks to the dquot_alloc/free functions to fix the problem. The problem has been revealed by xfstests #117 (and possibly others). Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Niu Yawei authored
commit f1167009 upstream. In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when changing the lg_prealloc_list. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit 72ba7450 upstream. In addition, print the error returned from ext4_enable_quotas() Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eryu Guan authored
commit 15b49132 upstream. Validate the bh pointer before using it, since ext4_read_block_bitmap_nowait() might return NULL. I've seen this in fsfuzz testing. EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0 ... Call Trace: [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60 [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80 [<ffffffff811d0d36>] ? __getblk+0x36/0x70 [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210 [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140 [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0 [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100 [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0 [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230 [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490 [<ffffffff811b8cd7>] evict+0xa7/0x1c0 [<ffffffff811b8ed3>] iput_final+0xe3/0x170 [<ffffffff811b8f9e>] iput+0x3e/0x50 [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90 [<ffffffff81231d0b>] ext4_create+0xeb/0x170 [<ffffffff811aae9c>] vfs_create+0xac/0xd0 [<ffffffff811ac845>] lookup_open+0x185/0x1c0 [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170 [<ffffffff811acb54>] do_last+0x2d4/0x7a0 [<ffffffff811af743>] path_openat+0xb3/0x480 [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff811afc49>] do_filp_open+0x49/0xa0 [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150 [<ffffffff8119da28>] do_sys_open+0x108/0x1f0 [<ffffffff8119db51>] sys_open+0x21/0x30 [<ffffffff81618959>] system_call_fastpath+0x16/0x1b Also fix comment for ext4_read_block_bitmap_nowait() Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit 860d21e2 upstream. The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So ENOMEM is more appropriate than EIO. In addition, make sure that the file system is marked as being inconsistent if sb_getblk() fails. Signed-off-by:
-
Dan Carpenter authored
commit 30ebc5e4 upstream. We recently introduced a new return -ENODEV in this function but we need to unlock before returning. [mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch] Acked-by:
Herton R. Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Douglas Bagnall <douglas@paradise.net.nz> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Al Viro authored
commit 55ee64b3 upstream. Walking rbtree while it's modified is a Bad Idea(tm); besides, the result of find_vma() can be freed just as it's getting returned to caller. Fortunately, it's easy to fix - just take ->mmap_sem a bit earlier (and don't bother with find_vma() at all if virtp >= PAGE_OFFSET - in that case we don't even look at its result). While we are at it, what prevents VIDIOC_PREPARE_BUF calling v4l_prepare_buf() -> (e.g) vb2_ioctl_prepare_buf() -> vb2_prepare_buf() -> __buf_prepare() -> __qbuf_userptr() -> vb2_vmalloc_get_userptr() -> find_vma(), AFAICS without having taken ->mmap_sem anywhere in process? The code flow is bloody convoluted and depends on a bunch of things done by initialization, so I certainly might've missed something... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <archit@ti.com> Cc: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by:
-
Laurent Pinchart authored
commit 317efce9 upstream. When subdev registration fails the subdev v4l2_dev field is left to a non-NULL value. Later calls to v4l2_device_unregister_subdev() will consider the subdev as registered and will module_put() the subdev module without any matching module_get(). Fix this by setting the subdev v4l2_dev field to NULL in v4l2_device_register_subdev() when the function fails. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit cfb046cb upstream. Commits 5e6e81b2 (cx18) and 2aebbf67 (ivtv) added an __init annotation to the cx18-alsa-load and ivtv-alsa-load functions. However, these functions are called *after* initialization by the main cx18/ivtv driver. By that time the memory containing those functions is already freed and your machine goes BOOM. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jan Kara authored
commit 091e26df upstream. Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 54c807e7 upstream. Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. Acked-by:
-
Paolo Bonzini authored
commit 3a2d63f8 upstream. There are two problems with shutdown in the NBD driver. 1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem. This patch adds the sync operation into __nbd_ioctl()'s NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted to processes that have CAP_SYS_ADMIN, and the NBD client may not possess it (fsync of the block device does not sync the filesystem, either). 2: Once we clear the socket we have no guarantee that later reads will come from the same backing storage. The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket clearing code so the page cache is cleaned, lest reads that hit on the page cache will return stale data from the previously-accessible disk. Example: # qemu-nbd -r -c/dev/nbd0 /dev/sr0 # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. # qemu-nbd -d /dev/nbd0 # qemu-nbd -r -c/dev/nbd0 /dev/sda # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. While /dev/sda has: # file -s /dev/sda /dev/sda: x86 boot sector; etc. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Xi Wang authored
commit df1778be upstream. The null check of `strchr() + 1' is broken, which is always non-null, leading to OOB read. Instead, check the result of strchr(). Signed-off-by:
Xi Wang <xi.wang@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Tejun Heo authored
commit 3bec60d5 upstream. fw_device_init() didn't check whether the allocated minor number isn't too large. Fail if it goes overflows MINORBITS. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by:
-
Tejun Heo authored
commit ce23bba8 upstream. idr allocation in blk_alloc_devt() wasn't synchronized against lookup and removal, and its limit check was off by one - 1 << MINORBITS is the number of minors allowed, not the maximum allowed minor. Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit checking. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tejun Heo authored
commit 6cdae741 upstream. The iteration logic of idr_get_next() is borrowed mostly verbatim from idr_for_each(). It walks down the tree looking for the slot matching the current ID. If the matching slot is not found, the ID is incremented by the distance of single slot at the given level and repeats. The implementation assumes that during the whole iteration id is aligned to the layer boundaries of the level closest to the leaf, which is true for all iterations starting from zero or an existing element and thus is fine for idr_for_each(). However, idr_get_next() may be given any point and if the starting id hits in the middle of a non-existent layer, increment to the next layer will end up skipping the same offset into it. For example, an IDR with IDs filled between [64, 127] would look like the following. [ 0 64 ... ] /----/ | | | NULL [ 64 ... 127 ] If idr_get_next() is called with 63 as the starting point, it will try to follow down the pointer from 0. As it is NULL, it will then try to proceed to the next slot in the same level by adding the slot distance at that level which is 64 - making the next try 127. It goes around the loop and finds and returns 127 skipping [64, 126]. Note that this bug also triggers in idr_for_each_entry() loop which deletes during iteration as deletions can make layers go away leaving the iteration with unaligned ID into missing layers. Fix it by ensuring proceeding to the next slot doesn't carry over the unaligned offset - ie. use round_up(id + 1, slot_distance) instead of id += slot_distance. Signed-off-by:
David Teigland <teigland@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Roger Pau Monne authored
commit 087ffecd upstream. With current persistent grants implementation we are not freeing the persistent grants after we disconnect the device. Since grant map operations change the mfn of the allocated page, and we can no longer pass it to __free_page without setting the mfn to a sane value, use balloon grant pages instead, as the gntdev device does. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit f84adf49 upstream. Replace llist_for_each_entry_safe with a while loop. llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best to remove it and use a while loop and do the deletion manually. Specifically this bug can be triggered by hot-unplugging a disk, either by doing xm block-detach or by save/restore cycle. BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront] The crash call trace is: ... bad_area_nosemaphore+0x13/0x20 do_page_fault+0x25e/0x4b0 page_fault+0x25/0x30 ? blkif_free+0x63/0x130 [xen_blkfront] blkfront_resume+0x46/0xa0 [xen_blkfront] xenbus_dev_resume+0x6c/0x140 pm_op+0x192/0x1b0 device_resume+0x82/0x1e0 dpm_resume+0xc9/0x1a0 dpm_resume_end+0x15/0x30 do_suspend+0x117/0x1e0 When drilling down to the assembler code, on newer GCC it does .L29: cmpq $-16, %r12 #, persistent_gnt check je .L30 #, out of the loop .L25: ... code in the loop testq %r13, %r13 # n je .L29 #, back to the top of the loop cmpq $-16, %r12 #, persistent_gnt check movq 16(%r12), %r13 # <variable>.node.next, n jne .L25 #, back to the top of the loop .L30: While on GCC 4.1, it is: L78: ... code in the loop testq %r13, %r13 # n je .L78 #, back to the top of the loop movq 16(%rbx), %r13 # <variable>.node.next, n jmp .L78 #, back to the top of the loop Which basically means that the exit loop condition instead of being: &(pos)->member != NULL; is: ; which makes the loop unbound. Since xen-blkfront is the only user of the llist_for_each_entry_safe macro remove it from llist.h. Orabug: 16263164 Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 01c681d4 upstream. The 'handle' is the device that the request is from. For the life-time of the ring we copy it from a request to a response so that the frontend is not surprised by it. But we do not need it - when we start processing I/Os we have our own 'struct phys_req' which has only most essential information about the request. In fact the 'vbd_translate' ends up over-writing the preq.dev with a value from the backend. This assignment of preq.dev with the 'handle' value is superfluous so lets not do it. Acked-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Jan Beulich authored
commit 9d092603 upstream. "be->mode" is obtained from xenbus_read(), which does a kmalloc() for the message body. The short string is never released, so do it along with freeing "be" itself, and make sure the string isn't kept when backend_changed() doesn't complete successfully (which made it desirable to slightly re-structure that function, so that the error cleanup can be done in one place). Reported-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
