This function improves code readability and reduces code duplication.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Code today only clears the association_id if a Disconnect LS is transmit.

Remove ambiguity and unconditionally clear the association_id if the
association has been terminated.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Change wording on a couple of messages to clarify what happened.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Set the new category field in the FC-NVME CMND_IU based on queue number.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Sync sources with revised structure and field names to correspond with
FC-NVME-2 header sync-up.

Tested interoperability with success:
- prior initiator with new target
- prior target with new initiator
- new on new
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Sync the header to FC-NVME-2 r1.06 (T11-2019-00210-v001).

Includes some minor mods where pre-release field names changed
by the time the spec was released.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range.  This behavior is
correct if unmapping is allowed.  However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.

To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.

Fixes: 19372e27 ("loop: implement REQ_OP_WRITE_ZEROES")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Fix misspelling of "configuration".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.5/drivers

Pull MD changes from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: no longer compare spare disk superblock events in super_load
  md: improve handling of bio with REQ_PREFLUSH in md_flush_request()
  md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit
  md/raid0: Fix an error message in raid0_make_request()

We have a test case as follow:

  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] \
	--assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

When we readd /dev/sda to the array, it started to do recovery.
After offline the other two disks in md1, the recovery have
been interrupted and superblock update info cannot be written
to the offline disks. While the spare disk (/dev/sda) can continue
to update superblock info.

After stopping the array and assemble it, we found the array
run fail, with the follow kernel message:

[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)
[  173.023466] md: md1 stopped.

Since both sdb and sdc have the value of 'sb->events' smaller than
that in sda, they have been kicked from the array. However, the only
remained disk sda is in 'spare' state before stop and it cannot be
added to conf->mirrors[] array. In the end, raid array assemble
and run fail.

In fact, we can use the older disk sdb or sdc to assemble the array.
That means we should not choose the 'spare' disk as the fresh disk in
analyze_sbs().

To fix the problem, we do not compare superblock events when it is
a spare disk, as same as validate_super.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.

Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function.  If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.

Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.

Fixes: 2bc13b83 ("md: batch flush requests.")
Cc: stable@vger.kernel.org # # v4.19+
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

We need to move "spin_lock_irq(&bitmap->counts.lock)" before unmap previous
storage, otherwise panic like belows could happen as follows.

[  902.353802] sdl: detected capacity change from 1077936128 to 3221225472
[  902.616948] general protection fault: 0000 [#1] SMP
[snip]
[  902.618588] CPU: 12 PID: 33698 Comm: md0_raid1 Tainted: G           O    4.14.144-1-pserver #4.14.144-1.1~deb10
[  902.618870] Hardware name: Supermicro SBA-7142G-T4/BHQGE, BIOS 3.00       10/24/2012
[  902.619120] task: ffff9ae1860fc600 task.stack: ffffb52e4c704000
[  902.619301] RIP: 0010:bitmap_file_clear_bit+0x90/0xd0 [md_mod]
[  902.619464] RSP: 0018:ffffb52e4c707d28 EFLAGS: 00010087
[  902.619626] RAX: ffe8008b0d061000 RBX: ffff9ad078c87300 RCX: 0000000000000000
[  902.619792] RDX: ffff9ad986341868 RSI: 0000000000000803 RDI: ffff9ad078c87300
[  902.619986] RBP: ffff9ad0ed7a8000 R08: 0000000000000000 R09: 0000000000000000
[  902.620154] R10: ffffb52e4c707ec0 R11: ffff9ad987d1ed44 R12: ffff9ad0ed7a8360
[  902.620320] R13: 0000000000000003 R14: 0000000000060000 R15: 0000000000000800
[  902.620487] FS:  0000000000000000(0000) GS:ffff9ad987d00000(0000) knlGS:0000000000000000
[  902.620738] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  902.620901] CR2: 000055ff12aecec0 CR3: 0000001005207000 CR4: 00000000000406e0
[  902.621068] Call Trace:
[  902.621256]  bitmap_daemon_work+0x2dd/0x360 [md_mod]
[  902.621429]  ? find_pers+0x70/0x70 [md_mod]
[  902.621597]  md_check_recovery+0x51/0x540 [md_mod]
[  902.621762]  raid1d+0x5c/0xeb0 [raid1]
[  902.621939]  ? try_to_del_timer_sync+0x4d/0x80
[  902.622102]  ? del_timer_sync+0x35/0x40
[  902.622265]  ? schedule_timeout+0x177/0x360
[  902.622453]  ? call_timer_fn+0x130/0x130
[  902.622623]  ? find_pers+0x70/0x70 [md_mod]
[  902.622794]  ? md_thread+0x94/0x150 [md_mod]
[  902.622959]  md_thread+0x94/0x150 [md_mod]
[  902.623121]  ? wait_woken+0x80/0x80
[  902.623280]  kthread+0x119/0x130
[  902.623437]  ? kthread_create_on_node+0x60/0x60
[  902.623600]  ret_from_fork+0x22/0x40
[  902.624225] RIP: bitmap_file_clear_bit+0x90/0xd0 [md_mod] RSP: ffffb52e4c707d28

Because mdadm was running on another cpu to do resize, so bitmap_resize was
called to replace bitmap as below shows.

PID: 38801  TASK: ffff9ad074a90e00  CPU: 0   COMMAND: "mdadm"
   [exception RIP: queued_spin_lock_slowpath+56]
   [snip]
-- <NMI exception stack> --
 #5 [ffffb52e60f17c58] queued_spin_lock_slowpath at ffffffff9c0b27b8
 #6 [ffffb52e60f17c58] bitmap_resize at ffffffffc0399877 [md_mod]
 #7 [ffffb52e60f17d30] raid1_resize at ffffffffc0285bf9 [raid1]
 #8 [ffffb52e60f17d50] update_size at ffffffffc038a31a [md_mod]
 #9 [ffffb52e60f17d70] md_ioctl at ffffffffc0395ca4 [md_mod]

And the procedure to keep resize bitmap safe is allocate new storage
space, then quiesce, copy bits, replace bitmap, and re-start.

However the daemon (bitmap_daemon_work) could happen even the array is
quiesced, which means when bitmap_file_clear_bit is triggered by raid1d,
then it thinks it should be fine to access store->filemap since
counts->lock is held, but resize could change the storage without the
protection of the lock.

Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

The first argument to WARN() is supposed to be a condition.  The
original code will just print the mdname() instead of the full warning
message.

Fixes: c84a1372 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

A zoned block device maintains a write pointer within a zone, and reads
beyond the write pointer are undefined. Fill data buffer returned above
the write pointer with 0xFF.
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch makes it possible to test blk_mq_update_nr_hw_queues() from
inside a VM.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Introduce a local variable to make the code easier to read. This patch
does not change any functionality but makes the next patch in this
series easier to read.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.

Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac7 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases.  But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.

Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case.  End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.

Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.

This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.

Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes.  We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.

It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.

Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.

In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac7 ("elf: enforce  MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping regression fix from Christoph Hellwig:
 "Revert an incorret hunk from a patch that caused problems on various
  arm boards (Andrey Smirnov)"

* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix false positive warnings in dma_common_free_remap()

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes this time around:

   - Fixup of some clock specifications for DRA7 (device-tree fix)

   - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
     warnings at boot

   - A few more minor fixups for OMAPs, most around display

   - Enable STM32 QSPI as =y since their rootfs sometimes comes from
     there

   - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool

   - Fix of thermal zone definition for ux500 (5.4 regression)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
  ARM: dts: ux500: Fix up the CPU thermal zone
  arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unneeded ar-option and KBUILD_ARFLAGS

 - remove long-deprecated SUBDIRS

 - fix modpost to suppress false-positive warnings for UML builds

 - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}

 - make setlocalversion work for /bin/sh

 - make header archive reproducible

 - fix some Makefiles and documents

* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: make headers archive reproducible
  kbuild: update compile-test header list for v5.4-rc2
  kbuild: two minor updates for Documentation/kbuild/modules.rst
  scripts/setlocalversion: clear local variable to make it work for sh
  namespace: fix namespace.pl script to support relative paths
  video/logo: do not generate unneeded logo C files
  video/logo: remove unneeded *.o pattern from clean-files
  integrity: remove pointless subdir-$(CONFIG_...)
  integrity: remove unneeded, broken attempt to add -fshort-wchar
  modpost: fix static EXPORT_SYMBOL warnings for UML build
  kbuild: correct formatting of header in kbuild module docs
  kbuild: remove SUBDIRS support
  kbuild: remove ar-option and KBUILD_ARFLAGS

Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()

This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

 "From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.

Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface.  Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple
of macros.  We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases.  Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.

 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
    Dumazet.

 3) txq null deref in mac80211, from Miaoqing Pan.

 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.

 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.

 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.

 7) Various xgmac fixes in stmmac driver from Jose Abreu.

 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
    Michal Kubecek.

 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.

10) Fix sleep while atomic in sja1105, from Vladimir Oltean.

11) Suspend/resume deadlock in stmmac, from Thierry Reding.

12) Various UDP GSO fixes from Josh Hunt.

13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
    Dumazet.

14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.

15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  selftests/net: add nettest to .gitignore
  net: qlogic: Fix memory leak in ql_alloc_large_buffers
  nfc: fix memory leak in llcp_sock_bind()
  sch_dsmark: fix potential NULL deref in dsmark_init()
  net: phy: at803x: use operating parameters from PHY-specific status
  net: phy: extract pause mode
  net: phy: extract link partner advertisement reading
  net: phy: fix write to mii-ctrl1000 register
  ipv6: Handle missing host route in __ipv6_ifa_notify
  net: phy: allow for reset line to be tied to a sleepy GPIO controller
  net: ipv4: avoid mixed n_redirects and rate_tokens usage
  r8152: Set macpassthru in reset_resume callback
  cxgb4:Fix out-of-bounds MSI-X info array access
  Revert "ipv6: Handle race in addrconf_dad_work"
  net: make sock_prot_memory_pressure() return "const char *"
  rxrpc: Fix rxrpc_recvmsg tracepoint
  qmi_wwan: add support for Cinterion CLS8 devices
  tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
  lib: textsearch: fix escapes in example code
  udp: only do GSO if # of segs > 1
  ...

Pull s390 fixes from Vasily Gorbik:

 - defconfig updates

 - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
   constraint for function arguments. Two kvm changes acked-by Christian
   Borntraeger.

 - Fix -Wunused-but-set-variable warnings in mm code.

 - Avoid a constant misuse in qdio.

 - Handle a case when cpumf is temporarily unavailable.

* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: mark __insn32_query() as __always_inline
  KVM: s390: fix __insn32_query() inline assembly
  s390: update defconfigs
  s390/pci: mark function(s) __always_inline
  s390/mm: mark function(s) __always_inline
  s390/jump_label: mark function(s) __always_inline
  s390/cpu_mf: mark function(s) __always_inline
  s390/atomic,bitops: mark function(s) __always_inline
  s390/mm: fix -Wunused-but-set-variable warnings
  s390: mark __cpacf_query() as __always_inline
  s390/qdio: clarify size of the QIB parm area
  s390/cpumf: Fix indentation in sampling device driver
  s390/cpumsf: Check for CPU Measurement sampling
  s390/cpumf: Use consistant debug print format

__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Commit 5cf45379 ("dma-mapping: introduce a dma_common_find_pages
helper") changed invalid input check in dma_common_free_remap() from:

    if (!area || !area->flags != VM_DMA_COHERENT)

to

    if (!area || !area->flags != VM_DMA_COHERENT || !area->pages)

which seem to produce false positives for memory obtained via
dma_common_contiguous_remap()

This triggers the following warning message when doing "reboot" on ZII
VF610 Dev Board Rev B:

WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c
trying to free invalid coherent area: 9ef82980
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24)
 r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14
[<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28)
[<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4)
[<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94)
 r6:00000070 r5:808e540c r4:81c03048
[<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c)
 r3:9ef82980 r2:808e53e0
 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000
[<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68)
 r5:81c03048 r4:9f4d9b78
[<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148)
 r5:81c03048 r4:9ef82900
[<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c)
 r5:9f563410 r4:80110120
[<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc)
[<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154)
 r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780
[<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150)
 r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148
[<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0)
 r5:9efd0148 r4:9efd0000
[<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0)
 r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000
[<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8)
 r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040
[<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38)
 r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040
[<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c)
[<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c)
 r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810
[<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c)
 r5:00000000 r4:9efa8810
[<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24)
 r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac
[<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108)
[<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c)
 r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810
[<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84)
 r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800
 r4:9efa8800
[<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34)
 r5:9f563400 r4:9efa8800
[<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30)
 r5:9f563400 r4:00000001
[<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118)
 r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010
[<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30)
[<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0)
[<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48)
 r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048
 r4:00000000
[<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60)
[<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8)
 r5:81c03048 r4:00000000
[<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c)
 r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000
[<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0x9f4d9fa8 to 0x9f4d9ff0)
9fa0:                   00000000 00000000 fee1dead 28121969 01234567 379ce700
9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04
9fe0: 00028e0c 7ec87c64 000135ec 76c1f410

Restore original invalid input check in dma_common_free_remap() to
avoid this problem.

Fixes: 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[hch: just revert the offending hunk instead of creating a new helper]
Signed-off-by: Christoph Hellwig <hch@lst.de>

In commit 43d8ce9d ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.

The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.

In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Capitalize the first word in the sentence.

Use obj-m instead of obj-y. obj-y still works, but we have no built-in
objects in external module builds. So, obj-m is better IMHO.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Geert Uytterhoeven reports a strange side-effect of commit 858805b3
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.

[Steps to Reproduce]
  $ echo bar > localversion
  $ mkdir build
  $ cd build/
  $ echo foo > localversion
  $ make -s -f ../Makefile defconfig include/config/kernel.release
  $ cat include/config/kernel.release
  5.4.0-rc1foofoobar

This comes down to the behavior change of local variables.

The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
  When a variable is made local, it inherits the initial value and
  exported and readonly flags from the variable with the same name
  in the surrounding scope, if there is one. Otherwise, the variable
  is initially unset.

[Test Code]

  foo ()
  {
          local res
          echo "res: $res"
  }

  res=1
  foo

[Result]

  $ sh test.sh
  res: 1
  $ bash test.sh
  res:

So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.

Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.

Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).

Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c0477 ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.

Files listed in 'targets' are cleaned, so clean-files is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The pattern *.o is cleaned up globally by the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.

subdir-$(CONFIG_...) is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.

load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:

  $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar

But, you do not need to fix it.

Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

nettest is missing from gitignore.

Fixes: acda655f ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>