- 16 Nov, 2017 40 commits
-
-
Sinclair Yeh authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit cef75036 upstream. This is an extension of Commit 7c20d213 ("drm/vmwgfx: Work around mode set failure in 2D VMs") With Wayland desktop and atomic mode set, during the mode setting process there is a moment when two framebuffer sized surfaces are being pinned. This was not an issue with Xorg. Since this only happens during a mode change, there should be no performance impact by increasing allowable mem_size. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
Kai-Heng Feng authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit cdea6a30 upstream. ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Oswald Buddenhagen authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit b084116f upstream. Without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is never copied, resulting in a dead port. Fixes: 154615d5 ("MIPS: AR7: Use correct UART port type") Signed-off-by:
Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [jonas.gorski: add Fixes tag] Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Nicolas Schichan <nschichan@freebox.fr> Cc: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17543/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Jonas Gorski authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit e6b03ab6 upstream. When called from prom init code, ar7_gpio_init() will fail as it will call gpiochip_add() which relies on a working kmalloc() to alloc the gpio_desc array and kmalloc is not useable yet at prom init time. Move ar7_gpio_init() to ar7_register_devices() (a device_initcall) where kmalloc works. Fixes: 14e85c0e ("gpio: remove gpio_descs global array") Signed-off-by:
-
Luis R. Rodriguez authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit afb999cd upstream. Some distributions (Debian, OpenSUSE) have a udev rule in place to cancel all fallback mechanism uevents immediately. This would obviously make it hard to test against the fallback mechanism test interface, so we need to check for this. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Luis R. Rodriguez authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 880444e2 upstream. Error that we expect should not be spilled to stdout. Without this we get: ./fw_filesystem.sh: line 58: printf: write error: Invalid argument ./fw_filesystem.sh: line 63: printf: write error: No such device ./fw_filesystem.sh: line 69: echo: write error: No such file or directory ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works With it: ./fw_filesystem.sh: filesystem loading works ./fw_filesystem.sh: async filesystem loading works Signed-off-by:
-
Brian Norris authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 1b1fe542 upstream. Now that we've added a 'trigger_async_request' knob to test the request_firmware_nowait() API, let's use it. Also add tests for the empty ("") string, since there have been a couple errors in that handling already. Since we now have real ways that the sysfs write might fail, let's add the appropriate check on the 'echo' lines too. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> [AmitP: Dropped the async trigger testing parts from original commit] Signed-off-by:
-
Brian Norris authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 47e0bbb7 upstream. request_firmware() failures currently won't get reported at all (the error code is discarded). What's more, we get confusing messages, like: # echo -n notafile > /sys/devices/virtual/misc/test_firmware/trigger_request [ 8280.311856] test_firmware: loading 'notafile' [ 8280.317042] test_firmware: load of 'notafile' failed: -2 [ 8280.322445] test_firmware: loaded: 0 # echo $? 0 Report the failures via write() errors, and don't say we "loaded" anything. Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 9e8c399a upstream. Commit 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") effectively reverted commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online") and thus has reinstated the possibility of deadlock. The commit was based on testing of kernel v4.4, where the CPU hotplug core code issued a BUG() if the starting CPU is not marked online when the boot CPU returns from __cpu_up. The commit fixes this race (in v4.4), but re-introduces the deadlock situation. As noted in the commit message, upstream differs in this area. Commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up") adds a completion event in the CPU hotplug core code, making this race impossible. However, people were unhappy with relying on the core code to do the right thing. To address the issues both commits were trying to fix, add a second completion event in the MIPS smp hotplug path. It removes the possibility of a race, since the MIPS smp hotplug code now synchronises both the boot and secondary CPUs before they return to the hotplug core code. It also addresses the deadlock by ensuring that the secondary CPU is not marked online before it's counters are synchronised. This fix should also be backported to fix the race condition introduced by the backport of commit 8f46cca1 ("MIPS: SMP: Fix possibility of deadlock when bringing CPUs online"), through really that race only existed before commit 8df3e07e ("cpu/hotplug: Let upcoming cpu bring itself fully up"). Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Fixes: 6f542ebe ("MIPS: Fix race on setting and getting cpu_online_mask") CC: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/17376/Signed-off-by:
-
Matija Glavinic Pecotic authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 6f542ebe upstream. While testing cpu hoptlug (cpu down and up in loops) on kernel 4.4, it was observed that occasionally check for cpu online will fail in kernel/cpu.c, _cpu_up: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/kernel/cpu.c?h=v4.4.79#n485 518 /* Arch-specific enabling code. */ 519 ret = __cpu_up(cpu, idle); 520 521 if (ret != 0) 522 goto out_notify; 523 BUG_ON(!cpu_online(cpu)); Reason is race between start_secondary and _cpu_up. cpu_callin_map is set before cpu_online_mask. In __cpu_up, cpu_callin_map is waited for, but cpu online mask is not, resulting in race in which secondary processor started and set cpu_callin_map, but not yet set the online mask,resulting in above BUG being hit. Upstream differs in the area. cpu_online check is in bringup_wait_for_ap, which is after cpu reached AP_ONLINE_IDLE,where secondary passed its start function. Nonetheless, fix makes start_secondary safe and not depending on other locks throughout the code. It protects as well against cpu_online checks put in between sometimes in the future. Fix this by moving completion after all flags are set. Signed-off-by:
Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16925/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit a00eeede upstream. If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by:
-
Paul Burton authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 6a6cba1d upstream. The default CM target field in the GCR_BASE register is encoded with 0 meaning memory & 1 being reserved. However the definitions we use for those bits effectively get these two values backwards - likely because they were copied from the definitions for the CM regions where the target is encoded differently. This results in use setting up GCR_BASE with the reserved target value by default, rather than targeting memory as intended. Although we currently seem to get away with this it's not a great idea to rely upon. Fix this by changing our macros to match the documentated target values. The incorrect encoding became used as of commit 9f98f3dd ("MIPS: Add generic CM probe & access code") in the Linux v3.15 cycle, and was likely carried forwards from older but unused code introduced by commit 39b8d525 ("[MIPS] Add support for MIPS CMP platform.") in the v2.6.26 cycle. Fixes: 9f98f3dd ("MIPS: Add generic CM probe & access code") Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
-
Gustavo A. R. Silva authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 77238e76 upstream. It seems that this is a typo error and the proper bit masking is "RT | RS" instead of "RS | RS". This issue was detected with the help of Coccinelle. Fixes: d6b3314b ("MIPS: uasm: Add lh uam instruction") Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 3510c7aa upstream. The recent fix for adding rwsem nesting annotation was using the given "hop" argument as the lock subclass key. Although the idea itself works, it may trigger a kernel warning like: BUG: looking up invalid subclass: 8 .... since the lockdep has a smaller number of subclasses (8) than we currently allow for the hops there (10). The current definition is merely a sanity check for avoiding the too deep delivery paths, and the 8 hops are already enough. So, as a quick fix, just follow the max hops as same as the max lockdep subclasses. Fixes: 1f20f9ff ("ALSA: seq: Fix nested rwsem annotation for lockdep splat") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 132d358b upstream. The SYSEX event delivery in OSS sequencer emulation assumed that the event is encoded in the variable-length data with the straight buffering. This was the normal behavior in the past, but during the development, the chained buffers were introduced for carrying more data, while the OSS code was left intact. As a result, when a SYSEX event with the chained buffer data is passed to OSS sequencer port, it may end up with the wrong memory access, as if it were having a too large buffer. This patch addresses the bug, by applying the buffer data expansion by the generic snd_seq_dump_var_event() helper function. Reported-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
Mark Rutland authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit b9dd05c7 upstream. When CONFIG_DEBUG_USER is enabled, it's possible for a user to deliberately trigger dump_instr() with a chosen kernel address. Let's avoid problems resulting from this by using get_user() rather than __get_user(), ensuring that we don't erroneously access kernel memory. So that we can use the same code to dump user instructions and kernel instructions, the common dumping code is factored out to __dump_instr(), with the fs manipulated appropriately in dump_instr() around calls to this. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 624f5ab8 upstream. syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y: keyctl add pkcs7_test desc '' @s The bug is that if the data buffer is empty, an integer underflow occurs in the following check: if (unlikely(dp >= datalen - 1)) goto data_overrun_error; This results in the NULL data pointer being dereferenced. Fix it by checking for 'datalen - dp < 2' instead. Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread. The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not. The bug report was: BUG: unable to handle kernel NULL pointer dereference at (null) IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014 task: ffff9b6b3798c040 task.stack: ffff9b6b37970000 RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0 RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0 Call Trace: pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139 verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216 pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63 key_create_or_update+0x180/0x530 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4585c9 RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9 RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000 RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000 Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78 CR2: 0000000000000000 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Reported-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Andrey Ryabinin authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit d041b557 upstream. struct sha1_ctx_mgr allocated in sha1_mb_mod_init() via kzalloc() and later passed in sha1_mb_flusher_mgr_flush_avx2() function where instructions vmovdqa used to access the struct. vmovdqa requires 16-bytes aligned argument, but nothing guarantees that struct sha1_ctx_mgr will have that alignment. Unaligned vmovdqa will generate GP fault. Fix this by replacing vmovdqa with vmovdqu which doesn't have alignment requirements. Fixes: 2249cbb5 ("crypto: sha-mb - SHA1 multibuffer submit and flush routines for AVX2") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Li Bin authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit cef572ad upstream. When queue_work() is used in irq (not in task context), there is a potential case that trigger NULL pointer dereference. ---------------------------------------------------------------- worker_thread() |-spin_lock_irq() |-process_one_work() |-worker->current_pwq = pwq |-spin_unlock_irq() |-worker->current_func(work) |-spin_lock_irq() |-worker->current_pwq = NULL |-spin_unlock_irq() //interrupt here |-irq_handler |-__queue_work() //assuming that the wq is draining |-is_chained_work(wq) |-current_wq_worker() //Here, 'current' is the interrupted worker! |-current->current_pwq is NULL here! |-schedule() ---------------------------------------------------------------- Avoid it by checking for task context in current_wq_worker(), and if not in task context, we shouldn't use the 'current' to check the condition. Reported-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
Li Bin <huawei.libin@huawei.com> Reviewed-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 8d03ecfe ("workqueue: reimplement is_chained_work() using current_wq_worker()") Signed-off-by:
-
Peter Zijlstra authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 7c478895 upstream. I recently encountered wreckage because access_ok() was used where it should not be, add an explicit WARN when access_ok() is used wrongly. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> [add include/preempt.h to fix build error - gregkh] Signed-off-by:
-
Carlo Caione authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit d3138769 upstream. All the helper functions (i.e. hp_wmi_dock_state, hp_wmi_tablet_state, ...) using hp_wmi_perform_query to perform an HP WMI query shadow the returned value in case of error. We return -EINVAL only when the HP WMI query returns a positive value (the specific error code) to not mix this up with the actual value returned by the helper function. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Cc: Philip Müller <philm@manjaro.org> Signed-off-by:
-
Carlo Caione authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit c7dfc2fa upstream. hp_wmi_tablet_state() fails to return the correct error code when hp_wmi_perform_query() returns the HP WMI query specific error code that is a positive value. Signed-off-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit a3c812f7 upstream. When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72 ("keys: add new trusted key-type") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by:
-
Eric Biggers authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit ee618b46 upstream. As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by:
-
Enrico Mioso authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 2b02c20c upstream. Some firmwares in Huawei E3372H devices have been observed to switch back to NTB 32-bit format after altsetting switch. This patch implements a driver flag to check for the device settings and set NTB format to 16-bit again if needed. The flag has been activated for devices controlled by the huawei_cdc_ncm.c driver. V1->V2: - fixed broken error checks - some corrections to the commit message V2->V3: - variable name changes, to clarify what's happening - check (and possibly set) the NTB format later in the common bind code path Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Reported-and-tested-by:
Christian Panton <christian@panton.org> Reviewed-by:
Bjørn Mork <bjorn@mork.no> CC: Bjørn Mork <bjorn@mork.no> CC: Christian Panton <christian@panton.org> CC: linux-usb@vger.kernel.org CC: netdev@vger.kernel.org CC: Oliver Neukum <oliver@neukum.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Porto Rio <porto.rio@gmx.net> Signed-off-by:
-
Carlo Caione authored
BugLink: http://bugs.launchpad.net/bugs/1732698 commit 298747b7 upstream. The current driver code is not checking for the error values returned by 'hp_wmi_dock_state()' and 'hp_wmi_tablet_state()' before passing the returned values down to 'input_report_switch()'. This error code is being translated to '1' in the input subsystem, reporting the wrong status. The biggest problem caused by this issue is that several laptops are wrongly reported by the driver as docked, preventing them to be put to sleep using the LID (and in most cases they are not even dockable). With this patch we create the report switches only if we are able to read the dock and tablet mode status correctly from ACPI. Signed-off-by:
-
Vivien Didelot authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 3a89eaa6 ] The support for DSA Ethernet switch chips depends on TCP/IP networking, thus explicit that HAVE_NET_DSA depends on INET. DSA uses SWITCHDEV, thus select it instead of depending on it. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Stefan Bader authored
BugLink: http://bugs.launchpad.net/bugs/1732698 Stable commit "net: dsa: select NET_SWITCHDEV" now requires an explicit setting. Signed-off-by:
-
Julian Wiedmann authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 10340510 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Feras Daoud authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 27d41d29 ] Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel. In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object. Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Akinobu Mita authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 9723ddc8 ] This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 08fea55e ] This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by:
-
Gilad Ben-Yossef authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit ebd89a2d ] ah4 input processing uses the asynchronous hash crypto API which supplies an error code as part of the operation completion but the error code was being ignored. Treat a crypto API error indication as a verification failure. While a crypto API reported error would almost certainly result in a memcpy of the digest failing anyway and thus the security risk seems minor, performing a memory compare on what might be uninitialized memory is wrong. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Liping Zhang authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit f169fd69 ] After adding the following nft rule, then ping 224.0.0.1: # nft add rule netdev t c pkttype host counter The warning complain message will be printed out again and again: WARNING: CPU: 0 PID: 10182 at net/netfilter/nft_meta.c:163 \ nft_meta_get_eval+0x3fe/0x460 [nft_meta] [...] Call Trace: <IRQ> dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_null+0x1d/0x20 nft_meta_get_eval+0x3fe/0x460 [nft_meta] nft_do_chain+0xff/0x5e0 [nf_tables] So we should deal with PACKET_LOOPBACK in netdev family too. For ipv4, convert it to PACKET_BROADCAST/MULTICAST according to the destination address's type; For ipv6, convert it to PACKET_MULTICAST directly. Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
William wu authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 76b8db0d ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by:
William wu <wulf@rock-chips.com> Acked-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Laurent Pinchart authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit a752ba18 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Volodymyr Bendiuga authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 4567d686 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by:
Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Signed-off-by:
Magnus Öberg <magnus.oberg@westermo.se> Reviewed-by:
-
Alison Schofield authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 10e840df ] These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get. In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare). In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare). Tested with the sysfs trigger driver. The bfin & interrupt drivers were build tested & inspected only. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Li Zhong authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 7dede913 ] Some preemptible check warnings were reported from enable_kernel_vsx(). This patch disables preemption in aes_ctr.c before enabling vsx, and they are now consistent with other files in the same directory. Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by:
-
Tony Lindgren authored
BugLink: http://bugs.launchpad.net/bugs/1732698 [ Upstream commit 4cd6a59f ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
