- 26 Sep, 2014 32 commits
-
-
LEROY Christophe authored
csum_partial() is a generic function which is not optimised for small fixed length calculations, and its use requires to store "from" and "to" values in memory while we already have them available in registers. This also has impact, especially on RISC processors. In the same spirit as the change done by Eric Dumazet on csum_replace2(), this patch rewrites inet_proto_csum_replace4() taking into account RFC1624. I spotted during a NATted tcp transfert that csum_partial() is one of top 5 consuming functions (around 8%), and the second user of csum_partial() is inet_proto_csum_replace4(). Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
LEROY Christophe authored
csum_partial() is a generic function which is not optimised for small fixed length calculations, and its use requires to store "from" and "to" values in memory while we already have them available in registers. This also has impact, especially on RISC processors. In the same spirit as the change done by Eric Dumazet on csum_replace2(), this patch rewrites inet_proto_csum_replace4() taking into account RFC1624. I spotted during a NATted tcp transfert that csum_partial() is one of top 5 consuming functions (around 8%), and the second user of csum_partial() is inet_proto_csum_replace4(). I have proposed the same modification to inet_proto_csum_replace4() in another patch. Signed-off-by:
-
David S. Miller authored
Fugang Duan says: ==================== net: fec: Code cleanup This patches does several things: - Fixing multiqueue issue. - Removing the unnecessary errata workaround. - Aligning the data buffer dma map/unmap size. - Freeing resource after probe failed. ==================== Signed-off-by: -
Nimrod Andy authored
Free memory and disable all related clocks when there has no phy connection or phy probe failed. Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Nimrod Andy authored
Align allocated rx data buffer size for dma map/unmap, otherwise kernel print warning when enable DMA_API_DEBUG. Signed-off-by:
-
Nimrod Andy authored
Remove the ERR006358 workaround for imx6sx enet since the hw issue was fixed on the SOC. Signed-off-by:
-
Nimrod Andy authored
The current driver loss Ftype field init for BD, which cause tx queue #1 and #2 cannot work well. Add Ftype field to BD to distiguish three queues for AVB: 0 -> Best Effort 1 -> ClassA 2 -> ClassB Signed-off-by:
-
Eric Dumazet authored
While profiling TCP stack, I noticed one useless atomic operation in tcp_sendmsg(), caused by skb_header_release(). It turns out all current skb_header_release() users have a fresh skb, that no other user can see, so we can avoid one atomic operation. Introduce __skb_header_release() to clearly document this. This gave me a 1.5 % improvement on TCP_RR workload. Signed-off-by:
-
Fabio Estevam authored
Sparse complains about fec_enet_select_queue() not being static. Feedback from David Miller [1] was to remove this function instead of making it static: "Please just delete this function. It's overriding code which does exactly the same thing. Actually, more precisely, this code is duplicating code in a way that bypasses many core facilitites of the networking. For example, this override means that socket based flow steering, XPS, etc. are all not happening on these devices. Without ->ndo_select_queue(), the flow dissector does __netdev_pick_tx which is exactly what you want to happen." [1] http://www.spinics.net/lists/netdev/msg297653.htmlSigned-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'master-2014-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by:
-
Joe Perches authored
No caller or macro uses the return value so make all the functions return void. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
No caller or macro uses the return value so make it void. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== eBPF syscall, verifier, testsuite v14 -> v15: - got rid of macros with hidden control flow (suggested by David) replaced macro with explicit goto or return and simplified where possible (affected patches #9 and #10) - rebased, retested v13 -> v14: - small change to 1st patch to ease 'new userspace with old kernel' problem (done similar to perf_copy_attr()) (suggested by Daniel) - the rest unchanged v12 -> v13: - replaced 'foo __user *' pointers with __aligned_u64 (suggested by David) - added __attribute__((aligned(8)) to 'union bpf_attr' to keep constant alignment between patches - updated manpage and syscall wrappers due to __aligned_u64 - rebased, retested on x64 with 32-bit and 64-bit userspace and on i386, build tested on arm32,sparc64 v11 -> v12: - dropped patch 11 and copied few macros to libbpf.h (suggested by Daniel) - replaced 'enum bpf_prog_type' with u32 to be safe in compat (.. Andy) - implemented and tested compat support (not part of this set) (.. Daniel) - changed 'void *log_buf' to 'char *' (.. Daniel) - combined struct bpf_work_struct and bpf_prog_info (.. Daniel) - added better return value explanation to manpage (.. Andy) - added log_buf/log_size explanation to manpage (.. Andy & Daniel) - added a lot more info about prog_type and map_type to manpage (.. Andy) - rebased, tweaked test_stubs Patches 1-4 establish BPF syscall shell for maps and programs. Patches 5-10 add verifier step by step Patch 11 adds test stubs for 'unspec' program type and verifier testsuite from user space Note that patches 1,3,4,7 add commands and attributes to the syscall while being backwards compatible from each other, which should demonstrate how other commands can be added in the future. After this set the programs can be loaded for testing only. They cannot be attached to any events. Though manpage talks about tracing and sockets, it will be a subject of future patches. Please take a look at manpage: BPF(2) Linux Programmer's Manual BPF(2) NAME bpf - perform a command on eBPF map or program SYNOPSIS #include <linux/bpf.h> int bpf(int cmd, union bpf_attr *attr, unsigned int size); DESCRIPTION bpf() syscall is a multiplexor for a range of different operations on eBPF which can be characterized as "universal in-kernel virtual machine". eBPF is similar to original Berkeley Packet Filter (or "classic BPF") used to filter network packets. Both statically analyze the programs before loading them into the kernel to ensure that programs cannot harm the running system. eBPF extends classic BPF in multiple ways including ability to call in- kernel helper functions and access shared data structures like eBPF maps. The programs can be written in a restricted C that is compiled into eBPF bytecode and executed on the eBPF virtual machine or JITed into native instruction set. eBPF Design/Architecture eBPF maps is a generic storage of different types. User process can create multiple maps (with key/value being opaque bytes of data) and access them via file descriptor. In parallel eBPF programs can access maps from inside the kernel. It's up to user process and eBPF program to decide what they store inside maps. eBPF programs are similar to kernel modules. They are loaded by the user process and automatically unloaded when process exits. Each eBPF program is a safe run-to-completion set of instructions. eBPF verifier statically determines that the program terminates and is safe to execute. During verification the program takes a hold of maps that it intends to use, so selected maps cannot be removed until the program is unloaded. The program can be attached to different events. These events can be packets, tracepoint events and other types in the future. A new event triggers execution of the program which may store information about the event in the maps. Beyond storing data the programs may call into in-kernel helper functions which may, for example, dump stack, do trace_printk or other forms of live kernel debugging. The same program can be attached to multiple events. Different programs can access the same map: tracepoint tracepoint tracepoint sk_buff sk_buff event A event B event C on eth0 on eth1 | | | | | | | | | | --> tracing <-- tracing socket socket prog_1 prog_2 prog_3 prog_4 | | | | |--- -----| |-------| map_3 map_1 map_2 Syscall Arguments bpf() syscall operation is determined by cmd which can be one of the following: BPF_MAP_CREATE Create a map with given type and attributes and return map FD BPF_MAP_LOOKUP_ELEM Lookup element by key in a given map and return its value BPF_MAP_UPDATE_ELEM Create or update element (key/value pair) in a given map BPF_MAP_DELETE_ELEM Lookup and delete element by key in a given map BPF_MAP_GET_NEXT_KEY Lookup element by key in a given map and return key of next element BPF_PROG_LOAD Verify and load eBPF program attr is a pointer to a union of type bpf_attr as defined below. size is the size of the union. union bpf_attr { struct { /* anonymous struct used by BPF_MAP_CREATE command */ __u32 map_type; __u32 key_size; /* size of key in bytes */ __u32 value_size; /* size of value in bytes */ __u32 max_entries; /* max number of entries in a map */ }; struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ __u32 map_fd; __aligned_u64 key; union { __aligned_u64 value; __aligned_u64 next_key; }; }; struct { /* anonymous struct used by BPF_PROG_LOAD command */ __u32 prog_type; __u32 insn_cnt; __aligned_u64 insns; /* 'const struct bpf_insn *' */ __aligned_u64 license; /* 'const char *' */ __u32 log_level; /* verbosity level of eBPF verifier */ __u32 log_size; /* size of user buffer */ __aligned_u64 log_buf; /* user supplied 'char *' buffer */ }; } __attribute__((aligned(8))); eBPF maps maps is a generic storage of different types for sharing data between kernel and userspace. Any map type has the following attributes: . type . max number of elements . key size in bytes . value size in bytes The following wrapper functions demonstrate how this syscall can be used to access the maps. The functions use the cmd argument to invoke different operations. BPF_MAP_CREATE int bpf_create_map(enum bpf_map_type map_type, int key_size, int value_size, int max_entries) { union bpf_attr attr = { .map_type = map_type, .key_size = key_size, .value_size = value_size, .max_entries = max_entries }; return bpf(BPF_MAP_CREATE, &attr, sizeof(attr)); } bpf() syscall creates a map of map_type type and given attributes key_size, value_size, max_entries. On success it returns process-local file descriptor. On error, -1 is returned and errno is set to EINVAL or EPERM or ENOMEM. The attributes key_size and value_size will be used by verifier during program loading to check that program is calling bpf_map_*_elem() helper functions with correctly initialized key and that program doesn't access map element value beyond specified value_size. For example, when map is created with key_size = 8 and program does: bpf_map_lookup_elem(map_fd, fp - 4) such program will be rejected, since in-kernel helper function bpf_map_lookup_elem(map_fd, void *key) expects to read 8 bytes from 'key' pointer, but 'fp - 4' starting address will cause out of bounds stack access. Similarly, when map is created with value_size = 1 and program does: value = bpf_map_lookup_elem(...); *(u32 *)value = 1; such program will be rejected, since it accesses value pointer beyond specified 1 byte value_size limit. Currently only hash table map_type is supported: enum bpf_map_type { BPF_MAP_TYPE_UNSPEC, BPF_MAP_TYPE_HASH, }; map_type selects one of the available map implementations in kernel. For all map_types eBPF programs access maps with the same bpf_map_lookup_elem()/bpf_map_update_elem() helper functions. BPF_MAP_LOOKUP_ELEM int bpf_lookup_elem(int fd, void *key, void *value) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), .value = ptr_to_u64(value), }; return bpf(BPF_MAP_LOOKUP_ELEM, &attr, sizeof(attr)); } bpf() syscall looks up an element with given key in a map fd. If element is found it returns zero and stores element's value into value. If element is not found it returns -1 and sets errno to ENOENT. BPF_MAP_UPDATE_ELEM int bpf_update_elem(int fd, void *key, void *value) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), .value = ptr_to_u64(value), }; return bpf(BPF_MAP_UPDATE_ELEM, &attr, sizeof(attr)); } The call creates or updates element with given key/value in a map fd. On success it returns zero. On error, -1 is returned and errno is set to EINVAL or EPERM or ENOMEM or E2BIG. E2BIG indicates that number of elements in the map reached max_entries limit specified at map creation time. BPF_MAP_DELETE_ELEM int bpf_delete_elem(int fd, void *key) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), }; return bpf(BPF_MAP_DELETE_ELEM, &attr, sizeof(attr)); } The call deletes an element in a map fd with given key. Returns zero on success. If element is not found it returns -1 and sets errno to ENOENT. BPF_MAP_GET_NEXT_KEY int bpf_get_next_key(int fd, void *key, void *next_key) { union bpf_attr attr = { .map_fd = fd, .key = ptr_to_u64(key), .next_key = ptr_to_u64(next_key), }; return bpf(BPF_MAP_GET_NEXT_KEY, &attr, sizeof(attr)); } The call looks up an element by key in a given map fd and returns key of the next element into next_key pointer. If key is not found, it return zero and returns key of the first element into next_key. If key is the last element, it returns -1 and sets errno to ENOENT. Other possible errno values are ENOMEM, EFAULT, EPERM, EINVAL. This method can be used to iterate over all elements of the map. close(map_fd) will delete the map map_fd. Exiting process will delete all maps automatically. eBPF programs BPF_PROG_LOAD This cmd is used to load eBPF program into the kernel. char bpf_log_buf[LOG_BUF_SIZE]; int bpf_prog_load(enum bpf_prog_type prog_type, const struct bpf_insn *insns, int insn_cnt, const char *license) { union bpf_attr attr = { .prog_type = prog_type, .insns = ptr_to_u64(insns), .insn_cnt = insn_cnt, .license = ptr_to_u64(license), .log_buf = ptr_to_u64(bpf_log_buf), .log_size = LOG_BUF_SIZE, .log_level = 1, }; return bpf(BPF_PROG_LOAD, &attr, sizeof(attr)); } prog_type is one of the available program types: enum bpf_prog_type { BPF_PROG_TYPE_UNSPEC, BPF_PROG_TYPE_SOCKET, BPF_PROG_TYPE_TRACING, }; By picking prog_type program author selects a set of helper functions callable from eBPF program and corresponding format of struct bpf_context (which is the data blob passed into the program as the first argument). For example, the programs loaded with prog_type = TYPE_TRACING may call bpf_printk() helper, whereas TYPE_SOCKET programs may not. The set of functions available to the programs under given type may increase in the future. Currently the set of functions for TYPE_TRACING is: bpf_map_lookup_elem(map_fd, void *key) // lookup key in a map_fd bpf_map_update_elem(map_fd, void *key, void *value) // update key/value bpf_map_delete_elem(map_fd, void *key) // delete key in a map_fd bpf_ktime_get_ns(void) // returns current ktime bpf_printk(char *fmt, int fmt_size, ...) // prints into trace buffer bpf_memcmp(void *ptr1, void *ptr2, int size) // non-faulting memcmp bpf_fetch_ptr(void *ptr) // non-faulting load pointer from any address bpf_fetch_u8(void *ptr) // non-faulting 1 byte load bpf_fetch_u16(void *ptr) // other non-faulting loads bpf_fetch_u32(void *ptr) bpf_fetch_u64(void *ptr) and bpf_context is defined as: struct bpf_context { /* argN fields match one to one to arguments passed to trace events */ u64 arg1, arg2, arg3, arg4, arg5, arg6; /* return value from kretprobe event or from syscall_exit event */ u64 ret; }; The set of helper functions for TYPE_SOCKET is TBD. More program types may be added in the future. Like BPF_PROG_TYPE_USER_TRACING for unprivileged programs. BPF_PROG_TYPE_UNSPEC is used for testing only. Such programs cannot be attached to events. insns array of "struct bpf_insn" instructions insn_cnt number of instructions in the program license license string, which must be GPL compatible to call helper functions marked gpl_only log_buf user supplied buffer that in-kernel verifier is using to store verification log. Log is a multi-line string that should be used by program author to understand how verifier came to conclusion that program is unsafe. The format of the output can change at any time as verifier evolves. log_size size of user buffer. If size of the buffer is not large enough to store all verifier messages, -1 is returned and errno is set to ENOSPC. log_level verbosity level of eBPF verifier, where zero means no logs provided close(prog_fd) will unload eBPF program The maps are accesible from programs and generally tie the two together. Programs process various events (like tracepoint, kprobe, packets) and store the data into maps. User space fetches data from maps. Either the same or a different map may be used by user space as configuration space to alter program behavior on the fly. Events Once an eBPF program is loaded, it can be attached to an event. Various kernel subsystems have different ways to do so. For example: setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd, sizeof(prog_fd)); will attach the program prog_fd to socket sock which was received by prior call to socket(). ioctl(event_fd, PERF_EVENT_IOC_SET_BPF, prog_fd); will attach the program prog_fd to perf event event_fd which was received by prior call to perf_event_open(). Another way to attach the program to a tracing event is: event_fd = open("/sys/kernel/debug/tracing/events/skb/kfree_skb/filter"); write(event_fd, "bpf-123"); /* where 123 is eBPF program FD */ /* here program is attached and will be triggered by events */ close(event_fd); /* to detach from event */ EXAMPLES /* eBPF+sockets example: * 1. create map with maximum of 2 elements * 2. set map[6] = 0 and map[17] = 0 * 3. load eBPF program that counts number of TCP and UDP packets received * via map[skb->ip->proto]++ * 4. attach prog_fd to raw socket via setsockopt() * 5. print number of received TCP/UDP packets every second */ int main(int ac, char **av) { int sock, map_fd, prog_fd, key; long long value = 0, tcp_cnt, udp_cnt; map_fd = bpf_create_map(BPF_MAP_TYPE_HASH, sizeof(key), sizeof(value), 2); if (map_fd < 0) { printf("failed to create map '%s'\n", strerror(errno)); /* likely not run as root */ return 1; } key = 6; /* ip->proto == tcp */ assert(bpf_update_elem(map_fd, &key, &value) == 0); key = 17; /* ip->proto == udp */ assert(bpf_update_elem(map_fd, &key, &value) == 0); struct bpf_insn prog[] = { BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), /* r6 = r1 */ BPF_LD_ABS(BPF_B, 14 + 9), /* r0 = ip->proto */ BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -4),/* *(u32 *)(fp - 4) = r0 */ BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), /* r2 = fp */ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4), /* r2 = r2 - 4 */ BPF_LD_MAP_FD(BPF_REG_1, map_fd), /* r1 = map_fd */ BPF_CALL_FUNC(BPF_FUNC_map_lookup_elem), /* r0 = map_lookup(r1, r2) */ BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), /* if (r0 == 0) goto pc+2 */ BPF_MOV64_IMM(BPF_REG_1, 1), /* r1 = 1 */ BPF_XADD(BPF_DW, BPF_REG_0, BPF_REG_1, 0, 0), /* lock *(u64 *)r0 += r1 */ BPF_MOV64_IMM(BPF_REG_0, 0), /* r0 = 0 */ BPF_EXIT_INSN(), /* return r0 */ }; prog_fd = bpf_prog_load(BPF_PROG_TYPE_SOCKET, prog, sizeof(prog), "GPL"); assert(prog_fd >= 0); sock = open_raw_sock("lo"); assert(setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd, sizeof(prog_fd)) == 0); for (;;) { key = 6; assert(bpf_lookup_elem(map_fd, &key, &tcp_cnt) == 0); key = 17; assert(bpf_lookup_elem(map_fd, &key, &udp_cnt) == 0); printf("TCP %lld UDP %lld packets0, tcp_cnt, udp_cnt); sleep(1); } return 0; } RETURN VALUE For a successful call, the return value depends on the operation: BPF_MAP_CREATE The new file descriptor associated with eBPF map. BPF_PROG_LOAD The new file descriptor associated with eBPF program. All other commands Zero. On error, -1 is returned, and errno is set appropriately. ERRORS EPERM bpf() syscall was made without sufficient privilege (without the CAP_SYS_ADMIN capability). ENOMEM Cannot allocate sufficient memory. EBADF fd is not an open file descriptor EFAULT One of the pointers ( key or value or log_buf or insns ) is outside accessible address space. EINVAL The value specified in cmd is not recognized by this kernel. EINVAL For BPF_MAP_CREATE, either map_type or attributes are invalid. EINVAL For BPF_MAP_*_ELEM commands, some of the fields of "union bpf_attr" unused by this command are not set to zero. EINVAL For BPF_PROG_LOAD, attempt to load invalid program (unrecognized instruction or uses reserved fields or jumps out of range or loop detected or calls unknown function). EACCES For BPF_PROG_LOAD, though program has valid instructions, it was rejected, since it was deemed unsafe (may access disallowed memory region or uninitialized stack/register or function constraints don't match actual types or misaligned access). In such case it is recommended to call bpf() again with log_level = 1 and examine log_buf for specific reason provided by verifier. ENOENT For BPF_MAP_LOOKUP_ELEM or BPF_MAP_DELETE_ELEM, indicates that element with given key was not found. E2BIG program is too large or a map reached max_entries limit (max number of elements). NOTES These commands may be used only by a privileged process (one having the CAP_SYS_ADMIN capability). SEE ALSO eBPF architecture and instruction set is explained in Documentation/networking/filter.txt Linux 2014-09-16 BPF(2) ==================== Signed-off-by: -
Alexei Starovoitov authored
1. the library includes a trivial set of BPF syscall wrappers: int bpf_create_map(int key_size, int value_size, int max_entries); int bpf_update_elem(int fd, void *key, void *value); int bpf_lookup_elem(int fd, void *key, void *value); int bpf_delete_elem(int fd, void *key); int bpf_get_next_key(int fd, void *key, void *next_key); int bpf_prog_load(enum bpf_prog_type prog_type, const struct sock_filter_int *insns, int insn_len, const char *license); bpf_prog_load() stores verifier log into global bpf_log_buf[] array and BPF_*() macros to build instructions 2. test stubs configure eBPF infra with 'unspec' map and program types. These are fake types used by user space testsuite only. 3. verifier tests valid and invalid programs and expects predefined error log messages from kernel. 40 tests so far. $ sudo ./test_verifier #0 add+sub+mul OK #1 unreachable OK #2 unreachable2 OK #3 out of range jump OK #4 out of range jump2 OK #5 test1 ld_imm64 OK ... Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexei Starovoitov authored
This patch adds verifier core which simulates execution of every insn and records the state of registers and program stack. Every branch instruction seen during simulation is pushed into state stack. When verifier reaches BPF_EXIT, it pops the state from the stack and continues until it reaches BPF_EXIT again. For program: 1: bpf_mov r1, xxx 2: if (r1 == 0) goto 5 3: bpf_mov r0, 1 4: goto 6 5: bpf_mov r0, 2 6: bpf_exit The verifier will walk insns: 1, 2, 3, 4, 6 then it will pop the state recorded at insn#2 and will continue: 5, 6 This way it walks all possible paths through the program and checks all possible values of registers. While doing so, it checks for: - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention - instruction encoding is not using reserved fields Kernel subsystem configures the verifier with two callbacks: - bool (*is_valid_access)(int off, int size, enum bpf_access_type type); that provides information to the verifer which fields of 'ctx' are accessible (remember 'ctx' is the first argument to eBPF program) - const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id); returns argument constraints of kernel helper functions that eBPF program may call, so that verifier can checks that R1-R5 types match the prototype More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c Signed-off-by:
-
Alexei Starovoitov authored
check that control flow graph of eBPF program is a directed acyclic graph check_cfg() does: - detect loops - detect unreachable instructions - check that program terminates with BPF_EXIT insn - check that all branches are within program boundary Signed-off-by:
-
Alexei Starovoitov authored
eBPF programs passed from userspace are using pseudo BPF_LD_IMM64 instructions to refer to process-local map_fd. Scan the program for such instructions and if FDs are valid, convert them to 'struct bpf_map' pointers which will be used by verifier to check access to maps in bpf_map_lookup/update() calls. If program passes verifier, convert pseudo BPF_LD_IMM64 into generic by dropping BPF_PSEUDO_MAP_FD flag. Note that eBPF interpreter is generic and knows nothing about pseudo insns. Signed-off-by:
-
Alexei Starovoitov authored
add optional attributes for BPF_PROG_LOAD syscall: union bpf_attr { struct { ... __u32 log_level; /* verbosity level of eBPF verifier */ __u32 log_size; /* size of user buffer */ __aligned_u64 log_buf; /* user supplied 'char *buffer' */ }; }; when log_level > 0 the verifier will return its verification log in the user supplied buffer 'log_buf' which can be used by program author to analyze why verifier rejected given program. 'Understanding eBPF verifier messages' section of Documentation/networking/filter.txt provides several examples of these messages, like the program: BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_CALL_FUNC(BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0), BPF_EXIT_INSN(), will be rejected with the following multi-line message in log_buf: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (b7) r1 = 0 4: (85) call 1 5: (15) if r0 == 0x0 goto pc+1 R0=map_ptr R10=fp 6: (7a) *(u64 *)(r0 +4) = 0 misaligned access off 4 size 8 The format of the output can change at any time as verifier evolves. Signed-off-by: -
Alexei Starovoitov authored
this patch adds all of eBPF verfier documentation and empty bpf_check() The end goal for the verifier is to statically check safety of the program. Verifier will catch: - loops - out of range jumps - unreachable instructions - invalid instructions - uninitialized register access - uninitialized stack access - misaligned stack access - out of range stack access - invalid calling convention More details in Documentation/networking/filter.txt Signed-off-by:
-
Alexei Starovoitov authored
in native eBPF programs userspace is using pseudo BPF_CALL instructions which encode one of 'enum bpf_func_id' inside insn->imm field. Verifier checks that program using correct function arguments to given func_id. If all checks passed, kernel needs to fixup BPF_CALL->imm fields by replacing func_id with in-kernel function pointer. eBPF interpreter just calls the function. In-kernel eBPF users continue to use generic BPF_CALL. Signed-off-by:
-
Alexei Starovoitov authored
eBPF programs are similar to kernel modules. They are loaded by the user process and automatically unloaded when process exits. Each eBPF program is a safe run-to-completion set of instructions. eBPF verifier statically determines that the program terminates and is safe to execute. The following syscall wrapper can be used to load the program: int bpf_prog_load(enum bpf_prog_type prog_type, const struct bpf_insn *insns, int insn_cnt, const char *license) { union bpf_attr attr = { .prog_type = prog_type, .insns = ptr_to_u64(insns), .insn_cnt = insn_cnt, .license = ptr_to_u64(license), }; return bpf(BPF_PROG_LOAD, &attr, sizeof(attr)); } where 'insns' is an array of eBPF instructions and 'license' is a string that must be GPL compatible to call helper functions marked gpl_only Upon succesful load the syscall returns prog_fd. Use close(prog_fd) to unload the program. User space tests and examples follow in the later patches Signed-off-by: -
Alexei Starovoitov authored
'maps' is a generic storage of different types for sharing data between kernel and userspace. The maps are accessed from user space via BPF syscall, which has commands: - create a map with given type and attributes fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size) returns fd or negative error - lookup key in a given map referenced by fd err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size) using attr->map_fd, attr->key, attr->value returns zero and stores found elem into value or negative error - create or update key/value pair in a given map err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size) using attr->map_fd, attr->key, attr->value returns zero or negative error - find and delete element by key in a given map err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size) using attr->map_fd, attr->key - iterate map elements (based on input key return next_key) err = bpf(BPF_MAP_GET_NEXT_KEY, union bpf_attr *attr, u32 size) using attr->map_fd, attr->key, attr->next_key - close(fd) deletes the map Signed-off-by:
-
Alexei Starovoitov authored
done as separate commit to ease conflict resolution Signed-off-by:
-
Alexei Starovoitov authored
BPF syscall is a multiplexor for a range of different operations on eBPF. This patch introduces syscall with single command to create a map. Next patch adds commands to access maps. 'maps' is a generic storage of different types for sharing data between kernel and userspace. Userspace example: /* this syscall wrapper creates a map with given type and attributes * and returns map_fd on success. * use close(map_fd) to delete the map */ int bpf_create_map(enum bpf_map_type map_type, int key_size, int value_size, int max_entries) { union bpf_attr attr = { .map_type = map_type, .key_size = key_size, .value_size = value_size, .max_entries = max_entries }; return bpf(BPF_MAP_CREATE, &attr, sizeof(attr)); } 'union bpf_attr' is backwards compatible with future extensions. More details in Documentation/networking/filter.txt and in manpage Signed-off-by: -
Eric Dumazet authored
While using a MQ + NETEM setup, I had confirmation that the default timer migration ( /proc/sys/kernel/timer_migration ) is killing us. Installing this on a receiver side of a TCP_STREAM test, (NIC has 8 TX queues) : EST="est 1sec 4sec" for ETH in eth1 do tc qd del dev $ETH root 2>/dev/null tc qd add dev $ETH root handle 1: mq tc qd add dev $ETH parent 1:1 $EST netem limit 70000 delay 6ms tc qd add dev $ETH parent 1:2 $EST netem limit 70000 delay 8ms tc qd add dev $ETH parent 1:3 $EST netem limit 70000 delay 10ms tc qd add dev $ETH parent 1:4 $EST netem limit 70000 delay 12ms tc qd add dev $ETH parent 1:5 $EST netem limit 70000 delay 14ms tc qd add dev $ETH parent 1:6 $EST netem limit 70000 delay 16ms tc qd add dev $ETH parent 1:7 $EST netem limit 80000 delay 18ms tc qd add dev $ETH parent 1:8 $EST netem limit 90000 delay 20ms done We can see that timers get migrated into a single cpu, presumably idle at the time timers are set up. Then all qdisc dequeues run from this cpu and huge lock contention happens. This single cpu is stuck in softirq mode and cannot dequeue fast enough. 39.24% [kernel] [k] _raw_spin_lock 2.65% [kernel] [k] netem_enqueue 1.80% [kernel] [k] netem_dequeue 1.63% [kernel] [k] copy_user_enhanced_fast_string 1.45% [kernel] [k] _raw_spin_lock_bh By pinning qdisc timers on the cpu running the qdisc, we respect proper XPS setting and remove this lock contention. 5.84% [kernel] [k] netem_enqueue 4.83% [kernel] [k] _raw_spin_lock 2.92% [kernel] [k] copy_user_enhanced_fast_string Current Qdiscs that benefit from this change are : netem, cbq, fq, hfsc, tbf, htb. Signed-off-by: -
David S. Miller authored
Tom Herbert says: ==================== net: Eliminate gso_send_check gso_send_check presents a lot of complexity for what it is being used for. It seems that there are only two cases where it might be effective: TCP and UFO paths. In these cases, the gso_send_check function initializes the TCP or UDP checksum respectively to the pseudo header checksum so that the checksum computation is appropriately offloaded or computed in the gso_segment functions. The gso_send_check functions are only called from dev.c in skb_mac_gso_segment when ip_summed != CHECKSUM_PARTIAL (which seems very unlikely in TCP case). We can move the logic of this into the respective gso_segment functions where the checksum is initialized if ip_summed != CHECKSUM_PARTIAL. With the above cases handled, gso_send_check is no longer needed, so we can remove all uses of it and the fields in the offload callbacks. With this change, ip_summed in the skb should be preserved though all the layers of gso_segment calls. In follow-on patches, we may be able to remove the check setup code in tcp_gso_segment if we can guarantee that ip_summed will always be CHECKSUM_PARTIAL (verify all paths and probably add an assert in tcp_gro_segment). Tested these patches by: - netperf TCP_STREAM test with GSO enabled - Forced ip_summed != CHECKSUM_PARTIAL with above - Ran UDP_RR with 10000 request size over GRE tunnel. This exercised UFO path. ==================== Signed-off-by: -
Tom Herbert authored
The send_check logic was only interesting in cases of TCP offload and UDP UFO where the checksum needed to be initialized to the pseudo header checksum. Now we've moved that logic into the related gso_segment functions so gso_send_check is no longer needed. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
In udp[46]_ufo_send_check the UDP checksum initialized to the pseudo header checksum. We can move this logic into udp[46]_ufo_fragment. After this change udp[64]_ufo_send_check is a no-op. Signed-off-by:
-
Tom Herbert authored
In tcp_v[46]_gso_send_check the TCP checksum is initialized to the pseudo header checksum using __tcp_v[46]_send_check. We can move this logic into new tcp[46]_gso_segment functions to be done when ip_summed != CHECKSUM_PARTIAL (ip_summed == CHECKSUM_PARTIAL should be the common case, possibly always true when taking GSO path). After this change tcp_v[46]_gso_send_check is no-op. Signed-off-by:
-
David S. Miller authored
Beniamino Galvani says: ==================== net: stmmac glue layer for Amlogic Meson SoCs the Ethernet controller available in Amlogic Meson6 and Meson8 SoCs is a Synopsys DesignWare MAC IP core, already supported by the stmmac driver. These patches add a glue layer to the driver for the platform-specific settings required by the Amlogic variant. This has been tested on a Amlogic S802 device with the initial Meson support submitted by Carlo Caione [1]. [1] http://lwn.net/Articles/612000/ ==================== Signed-off-by:
-
Beniamino Galvani authored
Add the device tree bindings documentation for the Amlogic Meson variant of the Synopsys DesignWare MAC. Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
-
Beniamino Galvani authored
The Ethernet controller available in Meson6 and Meson8 SoCs is a Synopsys DesignWare MAC IP core, already supported by the stmmac driver. This glue layer implements some platform-specific settings needed by the Amlogic variant. Signed-off-by:
-
- 24 Sep, 2014 8 commits
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Here is a quick pull request primarily meant to address the deconfig fallout from changing SCSI_NETLINK from being used via 'select' to being used via 'depends'. I applied a set of 5 patches written by Michal Marek, and then I carefully audited all of the remaining config files, basically: 1) I scanned every arch config file, and if it mentioned CONFIG_INET or CONFIG_UNIX, I made sure it had CONFIG_NET=y 2) After that, I scanned every arch config file, and if it did not have CONFIG_NET=y I made sure it did not reference any networking config options. Finally, we have some late breaking wireless fixes in here from John Linville and co" [ And there's a sparc bpf fix snuck in too ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sparc: bpf_jit: fix loads from negative offsets parisc: Update defconfigs which were missing CONFIG_NET. powerpc: Update defconfigs which were missing CONFIG_NET. s390: Update defconfigs which were missing CONFIG_NET. mips: Update some more defconfigs which were missing CONFIG_NET. sparc: Set CONFIG_NET=y in defconfigs sh: Set CONFIG_NET=y in defconfigs powerpc: Set CONFIG_NET=y in defconfigs parisc: Set CONFIG_NET=y in defconfigs mips: Set CONFIG_NET=y in defconfigs brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() ath9k: Fix NULL pointer dereference on early irq net: rfkill: gpio: Fix clock status NFC: st21nfca: Fix potential depmod dependency cycle NFC: st21nfcb: Fix depmod dependency cycle NFC: microread: Potential overflows in microread_target_discovered() -
Alexei Starovoitov authored
- fix BPF_LD|ABS|IND from negative offsets: make sure to sign extend lower 32 bits in 64-bit register before calling C helpers from JITed code, otherwise 'int k' argument of bpf_internal_load_pointer_neg_helper() function will be added as large unsigned integer, causing packet size check to trigger and abort the program. It's worth noting that JITed code for 'A = A op K' will affect upper 32 bits differently depending whether K is simm13 or not. Since small constants are sign extended, whereas large constants are stored in temp register and zero extended. That is ok and we don't have to pay a penalty of sign extension for every sethi, since all classic BPF instructions have 32-bit semantics and we only need to set correct upper bits when transitioning from JITed code into C. - though instructions 'A &= 0' and 'A *= 0' are odd, JIT compiler should not optimize them out Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-09-23 Please consider pulling this one last batch of fixes intended for the 3.17 stream! For the NFC bits, Samuel says: "Hopefully not too late for a handful of NFC fixes: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." On top of that... Emil Goode provides a fix for a brcmfmac off-by-one regression which was introduced in the 3.17 cycle. Loic Poulain fixes a polarity mismatch for a variable assignment inside of rfkill-gpio. Wojciech Dubowik prevents a NULL pointer dereference in ath9k. ==================== Signed-off-by: -
David S. Miller authored
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by:
-
David S. Miller authored
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by:
-
David S. Miller authored
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by:
-
David S. Miller authored
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by:
-
