- 12 Jun, 2020 6 commits
-
-
Balakrishna Godavarthi authored
By default, WCN3991 sent debug packets to HOST via ACL packet with header 0xDC2E. This logging is not required on commercial devices. With this patch SoC logging is disabled post fw download. Signed-off-by:
Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Alain Michaud authored
This change implements suggestions from the code review of the SCO CMSG state flag patch. Signed-off-by:
Alain Michaud <alainm@chromium.org> Signed-off-by:
-
Alain Michaud authored
This change adds support for reporting the BT_PKT_STATUS to the socket CMSG data to allow the implementation of a packet loss correction on erroneous data received on the SCO socket. The patch was partially developed by Marcel Holtmann and validated by Hsin-yu Chao. Signed-off-by:
-
Abhishek Pandit-Subedi authored
Use device_init_wakeup to allow the Bluetooth dev to wake the system from suspend. Currently, the device can wake the system but no power/wakeup entry is created in sysfs to allow userspace to disable wakeup. Signed-off-by:
Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Abhishek Pandit-Subedi authored
Use the parent device's power/wakeup to control whether we support remote wake. If remote wakeup is disabled, Bluetooth will not enable scanning for incoming connections. Signed-off-by:
-
Abhishek Pandit-Subedi authored
Set the correct parent dev when registering hdev. This allows userspace tools to find the parent device (for example, to set the power/wakeup property). Before this change, the path was /sys/devices/virtual/bluetooth/hci0 and after this change, it looks more like: /sys/bus/mmc/devices/mmc1:0001/mmc1:0001:2/bluetooth/hci0 Signed-off-by:
-
- 10 Jun, 2020 3 commits
-
-
Chethan T N authored
This patch shall enable the Intel telemetry exception format based on the supported features Signed-off-by:
Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by:
Ps AyappadasX <AyappadasX.Ps@intel.com> Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Chethan T N authored
The command shall read the Intel controller supported debug feature. Based on the supported features additional debug configuration shall be enabled. Signed-off-by:
-
Venkata Lakshmi Narayana Gubba authored
Due to race conditions between qca_hw_error and qca_controller_memdump during SSR timeout,the same pointer is freed twice. This results in a double free. Now a lock is acquired before checking the stauts of SSR state. Fixes: d841502c ("Bluetooth: hci_qca: Collect controller memory dump during SSR") Signed-off-by:
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Reviewed-by:
-
- 08 Jun, 2020 5 commits
-
-
Abhishek Pandit-Subedi authored
It is preferable to allow suspend even when Bluetooth has problems preparing for sleep. When Bluetooth fails to finish preparing for suspend, log the error and allow the suspend notifier to continue instead. To also make it clearer why suspend failed, change bt_dev_dbg to bt_dev_err when handling the suspend timeout. Fixes: dd522a74 ("Bluetooth: Handle LE devices during suspend") Reported-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Matthias Kaehlcke authored
If waiting for IBS sleep times out jump to the error handler, this is easier to read than multiple 'if' branches and a fall through to the error handler. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
-
Matthias Kaehlcke authored
qca_suspend() calls serdev_device_wait_until_sent() regardless of whether a transfer is pending. While it does no active harm since the function should return immediately it makes the code more confusing. Add a flag to track whether a transfer is pending and only call serdev_device_wait_until_sent() is needed. Signed-off-by:
-
Matthias Kaehlcke authored
qca_suspend() removes the vote for the UART TX clock after writing an IBS sleep request to the serial buffer. This is not a good idea since there is no guarantee that the request has been sent at this point. Instead remove the vote after successfully entering IBS sleep. This also fixes the issue of the vote being removed in case of an aborted suspend due to a failure of entering IBS sleep. Fixes: 41d5b25f ("Bluetooth: hci_qca: add PM support") Signed-off-by:
-
Matthias Kaehlcke authored
The serial clocks should be on when there is a vote for at least one of the clocks (RX or TX), and off when there is no 'on' vote. The current logic to determine the combined state is a bit redundant in the code paths for different types of votes, use a single statement in the common path instead. Signed-off-by:
-
- 03 Jun, 2020 3 commits
-
-
Dan Carpenter authored
When a function like devm_clk_get_optional() function returns both error pointers on error and NULL then the NULL return means that the optional feature is deliberately disabled. It is a special sort of success and should not trigger an error message. The surrounding code should be written to check for NULL and not crash. On the other hand, if we encounter an error, then the probe from should clean up and return a failure. In this code, if devm_clk_get_optional() returns an error pointer then the kernel will crash inside the call to: clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ); The error handling must be updated to prevent that. Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alain Michaud authored
This patch removes a particularly noisy dbg message. The debug message isn't particularly interesting for debuggability so it was simply removed to reduce noise in dbg logs. Signed-off-by:
-
Manish Mandlik authored
Check current scan state by checking HCI_LE_SCAN flag and send scan disable command only if scan is already enabled. Signed-off-by:
Manish Mandlik <mmandlik@google.com> Reviewed-by:
-
- 01 Jun, 2020 4 commits
-
-
Pali Rohár authored
Firmware for sd8997 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8997_combo_v4.bin. This patch fixes mwifiex driver to load correct firmware file for sd8997. Fixes: f0ef6748 ("Bluetooth: btmrvl: add sd8997 chipset support") Signed-off-by:
Pali Rohár <pali@kernel.org> Acked-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
Pali Rohár authored
Firmware for sd8977 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8977_combo_v2.bin. This patch fixes mwifiex driver to load correct firmware file for sd8977. Fixes: 8c57983b ("Bluetooth: btmrvl: add support for sd8977 chipset") Signed-off-by:
-
Pali Rohár authored
Firmware for sd8997 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8997_combo_v4.bin. This patch fixes mwifiex driver to load correct firmware file for sd8997. Fixes: 6d85ef00 ("mwifiex: add support for 8997 chipset") Signed-off-by:
-
Pali Rohár authored
Firmware for sd8977 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8977_combo_v2.bin. This patch fixes mwifiex driver to load correct firmware file for sd8977. Fixes: 1a0f5478 ("mwifiex: add support for sd8977 chipset") Signed-off-by:
-
- 02 Jun, 2020 19 commits
-
-
Thadeu Lima de Souza Cascardo authored
When running with conntrack rules, the dropped overlap fragments may cause EPERM to be returned to sendto. Instead of completely failing, just ignore those errors and continue. If this causes packets with overlap fragments to be dropped as expected, that is okay. And if it causes packets that are expected to be received to be dropped, which should not happen, it will be detected as failure. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
found by smatch: drivers/net/net_failover.c:65 net_failover_open() error: we previously assumed 'primary_dev' could be null (see line 43) Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
David S. Miller authored
Tuong Lien says: ==================== tipc: revert two patches We revert two patches: tipc: Fix potential tipc_node refcnt leak in tipc_rcv tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv which prevented TIPC encryption from working properly and caused kernel panic. ==================== Signed-off-by: -
Tuong Lien authored
This reverts commit 441870ee. Like the previous patch in this series, we revert the above commit that causes similar issues with the 'aead' object. Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Tuong Lien authored
This reverts commit de058420. There is no actual tipc_node refcnt leak as stated in the above commit. The refcnt is hold carefully for the case of an asynchronous decryption (i.e. -EINPROGRESS/-EBUSY and skb = NULL is returned), so that the node object cannot be freed in the meantime. The counter will be re-balanced when the operation's callback arrives with the decrypted buffer if any. In other cases, e.g. a synchronous crypto the counter will be decreased immediately when it is done. Now with that commit, a kernel panic will occur when there is no node found (i.e. n = NULL) in the 'tipc_rcv()' or a premature release of the node object. This commit solves the issues by reverting the said commit, but keeping one valid case that the 'skb_linearize()' is failed. Acked-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Ronak Doshi authored
It makes sense to allow changes to get/set rx flow hash callback only when rss is enabled. This patch restricts get_rss_hash_opts and set_rss_hash_opts methods to allow querying and configuring different Rx flow hash configurations only when rss is enabled Signed-off-by:
Ronak Doshi <doshir@vmware.com> Signed-off-by:
-
Luo bin authored
add support to change TX/RX queue number with "ethtool -L combined". V5 -> V6: remove check for carrier in hinic_xmit_frame V4 -> V5: change time zone in patch header V3 -> V4: update date in patch header V2 -> V3: remove check for zero channels->combined_count V1 -> V2: update commit message("ethtool -L" to "ethtool -L combined") V0 -> V1: remove check for channels->tx_count/rx_count/other_count Signed-off-by:Luo bin <luobin9@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-06-02 The following pull-request contains BPF _fixes-only_ for your *net-next* tree. We've added 10 non-merge commits during the last 1 day(s) which contain a total of 15 files changed, 229 insertions(+), 74 deletions(-). The main changes are: 1) Several fixes to s390 BPF JIT e.g. fixing kernel panic when BPF stack is not 8-byte aligned, from Ilya Leoshkevich. 2) Fix bpf_skb_adjust_room() helper's CHECKSUM_UNNECESSARY handling which was wrongly bypassing TCP checksum verification, from Daniel Borkmann. 3) Fix tools/bpf/ build under MAKEFLAGS=rR which causes built-in CXX and others vars to be undefined, also from Ilya Leoshkevich. 4) Fix BPF ringbuf's selftest shared sample_cnt variable to avoid compiler optimizations on it, from Andrii Nakryiko. 5) Fix up test_verifier selftest due to addition of rx_queue_mapping to the bpf_sock structure, from Alexei Starovoitov. ==================== Signed-off-by: -
Ilya Leoshkevich authored
When using make kselftest TARGETS=bpf, tools/bpf is built with MAKEFLAGS=rR, which causes $(CXX) to be undefined, which in turn causes the build to fail with CXX test_cpp /bin/sh: 2: g: not found Fix by adding a default $(CXX) value, like tools/build/feature/Makefile already does. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602175649.2501580-3-iii@linux.ibm.com
-
Ilya Leoshkevich authored
When using make kselftest TARGETS=bpf, tools/bpf is built with MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn causes the build to fail with CC kselftest/bpf/tools/build/bpftool/map_perf_ring.o /bin/sh: 1: -MMD: not found Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c). Signed-off-by:
-
Ilya Leoshkevich authored
Since commit 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") 44 verifier tests fail on s390 due to not having bpf_probe_read anymore. Fix by using bpf_probe_read_kernel. Signed-off-by:
-
Ilya Leoshkevich authored
Currently used 0x0000 filler confuses bfd disassembler, making bpftool prog dump xlated output nearly useless. Fix by using a real instruction. Signed-off-by:
-
Ilya Leoshkevich authored
Certain kernel functions (e.g. get_vtimer/set_vtimer) cause kernel panic when the stack is not 8-byte aligned. Currently JITed BPF programs may trigger this by allocating stack frames with non-rounded sizes and then being interrupted. Fix by using rounded fp->aux->stack_depth. Signed-off-by:
-
Alexei Starovoitov authored
Adjust verifier test due to addition of new field. Fixes: c3c16f2e ("bpf: Add rx_queue_mapping to bpf_sock") Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Make sample_cnt volatile to fix possible selftests failure due to compiler optimization preventing latest sample_cnt value to be visible to main thread. sample_cnt is incremented in background thread, which is then joined into main thread. So in terms of visibility sample_cnt update is ok. But because it's not volatile, compiler might make optimizations that would prevent main thread to see latest updated value. Fix this by marking global variable volatile. Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200602050349.215037-1-andriin@fb.com
-
Alexei Starovoitov authored
Daniel Borkmann says: ==================== This series fixes an issue originally reported by Lorenz Bauer where using the bpf_skb_adjust_room() helper hid a checksum bug since it wasn't adjusting CHECKSUM_UNNECESSARY's skb->csum_level after decap. The fix is two-fold: i) We do a safe reset in bpf_skb_adjust_room() to CHECKSUM_NONE with an opt- out flag BPF_F_ADJ_ROOM_NO_CSUM_RESET. ii) We add a new bpf_csum_level() for the latter in order to allow users to manually inc/dec the skb->csum_level when needed. The series is rebased against latest bpf-next tree. It can be applied there, or to bpf after the merge win sync from net-next. Thanks! ==================== Signed-off-by: -
Daniel Borkmann authored
Adapt bpf_skb_adjust_room() to pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag and use the new bpf_csum_level() helper to inc/dec the checksum level by one after the encap/decap. Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/e7458f10e3f3d795307cbc5ad870112671d9c6f7.1591108731.git.daniel@iogearbox.net
-
Daniel Borkmann authored
Add a bpf_csum_level() helper which BPF programs can use in combination with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET flag to the latter to avoid falling back to CHECKSUM_NONE. The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary() on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the current level. Without this helper, there is no way to otherwise adjust the skb->csum_level. I did not add an extra dummy flags as there is plenty of free bitspace in level argument itself iff ever needed in future. Signed-off-by:Alan Maguire <alan.maguire@oracle.com> Acked-by:
-
Daniel Borkmann authored
Lorenz recently reported: In our TC classifier cls_redirect [0], we use the following sequence of helper calls to decapsulate a GUE (basically IP + UDP + custom header) encapsulated packet: bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO) bpf_redirect(skb->ifindex, BPF_F_INGRESS) It seems like some checksums of the inner headers are not validated in this case. For example, a TCP SYN packet with invalid TCP checksum is still accepted by the network stack and elicits a SYN ACK. [...] That is, we receive the following packet from the driver: | ETH | IP | UDP | GUE | IP | TCP | skb->ip_summed == CHECKSUM_UNNECESSARY ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading. On this packet we run skb_adjust_room_mac(-encap_len), and get the following: | ETH | IP | TCP | skb->ip_summed == CHECKSUM_UNNECESSARY Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is turned into a no-op due to CHECKSUM_UNNECESSARY. The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally, it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now there is no way to adjust the skb->csum_level. NICs that have checksum offload disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected. Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users from opting out. Opting out is useful for the case where we don't remove/add full protocol headers, or for the case where a user wants to adjust the csum level manually e.g. through bpf_csum_level() helper that is added in subsequent patch. The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally as well but doesn't change layers, only transitions between v4 to v6 and vice versa, therefore no adoption is required there. [0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/ Fixes: 2be7e212 ("bpf: add bpf_skb_adjust_room helper") Reported-by:
-
