The 158MiB memory area was used to support HD
resolution multimedia workloads using the same
legacy memory allocating solution as on SH.

There are no in-tree kernel dependencies on the
158MiB setting, and future development should
reserve and allocate memory using some other
method like for instance CMA.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Nicolas Pitre <nico@linaro.org>

THIS IS A TEMPORARY HACK.  The purpose of this is _only_ to avoid a
regression on an existing machine while a better fix is implemented.

On shmobile the consistent DMA memory area was set to 158MB in commit
28f0721a with no explanation.  The documented size for this area should
vary between 2MB and 14MB, and none of the other ARM targets exceed that.

The included #warning is therefore meant to be noisy on purpose to get
shmobile maintainers attention and this commit reverted once this
consistent DMA size conflict is resolved.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Magnus Damm <damm@opensource.se>
Cc: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Now that we have all the static mappings from iotable_init() located
in the vmalloc area, it is trivial to optimize ioremap by reusing those
static mappings when the requested physical area fits in one of them,
and so in a generic way for all platforms.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>

Firstly, there is no need to have a double pointer here as we're only
walking the vmlist and not modifying it.

Secondly, for the same reason, we don't need a write lock but only a
read lock here, since the lock only protects the coherency of the list
nothing else.

Lastly, the reason for holding a lock is not what the comment says, so
let's remove that misleading piece of information.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

In order to remove the build time variation between different SOCs with
regards to VMALLOC_END, the iotable mappings are now allocated inside
the vmalloc region.  This allows for VMALLOC_END to be identical across
all machines.

The value for VMALLOC_END is now set to 0xff000000 which is right where
the consistent DMA area starts.

To accommodate all static mappings on machines with possible highmem usage,
the default vmalloc area size is changed to 240 MB so that VMALLOC_START
is no higher than 0xf0000000 by default.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>

The existing vm_area_register_early() allows for early vmalloc space
allocation.  However upcoming cleanups in the ARM architecture require
that some fixed locations in the vmalloc area be reserved also very early.

The name "vm_area_register_early" would have been a good name for the
reservation part without the allocation.  Since it is already in use with
different semantics, let's create vm_area_add_early() instead.

Both vm_area_register_early() and vm_area_add_early() can be used together
meaning that the former is now implemented using the later where it is
ensured that no conflicting areas are added, but no attempt is made to
make the allocation scheme in vm_area_register_early() more sophisticated.
After all, you must know what you're doing when using those functions.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org

Some upcoming changes must know the VMALLOC_START value, which is based
on high_memory, before bootmem_init() is called.

The best location to set it is in sanity_check_meminfo() where the needed
computation is already done, and in the non MMU case it is trivial to do
now that the meminfo array is already sorted at that point.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

The meminfo array has to be sorted before sanity_check_meminfo() in
arch/arm/mm/mmu.c is called for it to work properly.  This also allows
for a simpler find_limits() in arch/arm/mm/init.c.

The sort is moved to arch/arm/kernel/setup.c because that's where the
meminfo array is populated.  Eventually this should be improved upon
to make the memory bank parser a bit more robust against problems
such as overlapping memory ranges.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

REALVIEW_EB11MP_GIC_CPU_BASE is not 4KB aligned which causes an
overlapping mapping. Use REALVIEW_EB11MP_SCU_BASE instead which is
aligned.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

REALVIEW_PBX_TILE_GIC_CPU_BASE is not 4KB aligned which causes an
overlapping mapping. Use REALVIEW_PBX_TILE_SCU_BASE instead which is
aligned.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

The map_desc for VERSATILE_GPIO0_BASE overlaps with VERSATILE_SCTL_BASE.
The overlapping entry can be removed.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Deepak Saxena <dsaxena@linaro.org>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Using VMALLOC_END implies a presumption about the layout which is best
avoided, even if in practice this would not change much.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.

As io.c has become nearly empty, omap_init_consistent_dma_size() is moved
into common.c so that io.c can be removed entirely.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Kevin Hilman <khilman@ti.com>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Stephen Warren <swarren@nvidia.com>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

... since it is going to change.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Barry Song <baohua.song@csr.com>

This include is unnecessary.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: omap: Fix compile failure

* 'fixes' of git://git.linaro.org/people/triad/linux-pinctrl:
  pinctrl: hide subsystem from the populace
  pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  fsl-rio: fix compile error

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: pca953x: propagate the errno from the chip_init functions
  gpio: pca953x: remove unneeded check for chip type
  gpio/omap: check return value from irq_alloc_generic_chip
  gpio/omap: replace MOD_REG_BIT macro with static inline

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  blackfin: Fixup export.h includes
  Blackfin: add serial TX IRQ in individual platform resource

On a corrupted file system the ->len field could be wrong leading to
a buffer overflow.
Reported-and-acked-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The "#include <linux/module.h>" was replaced by "#include <linux/export.h>"
in the patch "powerpc: various straight conversions from module.h --> export.h".
This will cause the following compile problem:
arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception':
arch/powerpc/sysdev/fsl_rio.c:296: error: implicit declaration of function 'search_exception_tables'.

The file fsl_rio.c needs the declaration of function "search_exception_tables"
in the header file "linux/module.h".
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Commit 8dc7a9c8 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:

	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration

This patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  ARM: mach-shmobile: cpuidle single/global and last_state fixes
  ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
  ARM: mach-shmobile: ap4evb: remove white space from end of line
  ARM: mach-shmobile: clock-sh7372: remove un-necessary index
  ARM: mach-shmobile: kota2: add comment out separator
  ARM: mach-shmobile: sh73a0: add MMC data pin pull-up

* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  mailmap: Fix up some renesas attributions
  sh: clkfwk: Kill off remaining debugfs cruft.
  drivers: sh: Kill off dead pathname for runtime PM stub.
  drivers: sh: Generalize runtime PM platform stub.
  sh: Wire up process_vm syscalls.
  sh: clkfwk: add clk_rate_mult_range_round()
  serial: sh-sci: Fix up SH-2A SCIF support.
  sh: Fix cached/uncaced address calculation in 29bit mode

* git://github.com/rustyrussell/linux:
  virtio-pci: fix use after free

Commit 31a3ddda introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.

For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.

We allocate/free all resources together with the
pci device, so we can leave the release method empty.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/combios: fix dynamic allocation of PM clock modes

After commit e978aa7d ("cpuidle: Move dev->last_residency update to
driver enter routine; remove dev->last_state") setting acpi_idle_suspend
to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to
return error codes continuously, which in turn causes cpuidle to lock up
(hard).

However, acpi_idle_suspend doesn't appear to be useful for any
particular purpose (it's racy and doesn't really provide any real
protection), so it can be removed, which makes the problem go away.
Reported-and-tested-by: Tomas M. <tmezzadra@gmail.com>
Reported-and-tested-by: Ferenc Wagner <wferi@niif.hu>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>