- 18 Oct, 2016 25 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== Move to BPF selftests This set improves the test_verifier and test_maps suite and moves it over to a new BPF selftest directory, so we can keep improving it under kernel selftest umbrella. This also integrates a test script for checking test_bpf.ko under various JIT options. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Add several spill/fill tests. Besides others, one that performs xadd on the spilled register, one ldx/stx test where different types are spilled from two branches and read out from common path. Verfier does handle all correctly. Signed-off-by:
-
David S. Miller authored
Jarod Wilson says: ==================== ethernet: use core min/max MTU checking Now that the network stack core min/max MTU checking infrastructure is in place, time to start making drivers use it. We'll start with the easiest ones, the ethernet drivers, split roughly by vendor, with a catch-all patch at the end. For the most part, every patch does the same essential thing: removes the MTU range checking from the drivers' ndo_change_mtu function, puts those ranges into the core net_device min_mtu and max_mtu fields, and where possible, removes ndo_change_mtu functions entirely. These patches have all been built through the 0-day build infrastructure provided by Intel, on top of net-next as of October 17. ==================== Signed-off-by: -
Jarod Wilson authored
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
gelic_net: min_mtu 64, max_mtu 1518 - remove gelic_net_change_mtu now that it is redundant spidernet: min_Mtu 64, max_mtu 2294 - remove spiter_net_change_mtu now that it is redundant CC: netdev@vger.kernel.org CC: Geoff Levand <geoff@infradead.org> CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by:
-
Jarod Wilson authored
tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam - remove tile_net_change_mtu now that it is fully redundant tilepro: min_mtu 68, max_mtu 1500 - hardware supports jumbo packets up to 10226, but it's not implemented or tested yet, according to code comments CC: netdev@vger.kernel.org CC: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Jarod Wilson authored
ehea: min_mtu 68, max_mtu 9022 - remove ehea_change_mtu, it's now redundant emac: min_mtu 46, max_mtu 1500 or whatever gets read from OF CC: netdev@vger.kernel.org CC: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by:
-
Jarod Wilson authored
liquidio: min_mtu 68, max_mtu 16000 thunder: min_mtu 64, max_mtu 9200 CC: netdev@vger.kernel.org CC: Sunil Goutham <sgoutham@cavium.com> CC: Robert Richter <rric@kernel.org> CC: Derek Chickles <derek.chickles@caviumnetworks.com> CC: Satanand Burla <satananda.burla@caviumnetworks.com> CC: Felix Manlunas <felix.manlunas@caviumnetworks.com> CC: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by:
-
Jarod Wilson authored
s2io: min_mtu 46, max_mtu 9600 vxge: min_mtu 68, max_mtu 9600 CC: netdev@vger.kernel.org CC: Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Jarod Wilson authored
dl2k: min_mtu 68, max_mtu 1536 or 8000, depending on hardware - Removed change_mtu, does nothing productive anymore sundance: min_mtu 68, max_mtu 8191 CC: netdev@vger.kernel.org CC: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Jarod Wilson authored
cassini: min_mtu 60, max_mtu 9000 niu: min_mtu 68, max_mtu 9216 sungem: min_mtu 68, max_mtu 1500 (comments say jumbo mode is broken) sunvnet: min_mtu 68, max_mtu 65535 - removed sunvnet_change_mut_common as it does nothing now CC: netdev@vger.kernel.org Signed-off-by:
-
Jarod Wilson authored
8139cp: min_mtu 60, max_mtu 4096 8139too: min_mtu 68, max_mtu 1770 r8169: min_mtu 60, max_mtu depends on chipset, 1500 to 9k-ish CC: netdev@vger.kernel.org CC: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by:
-
Jarod Wilson authored
qede: min_mtu 46, max_mtu 9600 - Put define for max in qede.h qlcnic: min_mtu 68, max_mtu 9600 CC: netdev@vger.kernel.org CC Dept-GELinuxNICDev@qlogic.com CC: Yuval Mintz <Yuval.Mintz@qlogic.com> CC: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
Jarod Wilson authored
mlx4: min_mtu 46, max_mtu depends on hardware mlx5: min_mtu 68, max_mtu depends on hardware CC: netdev@vger.kernel.org CC: Tariq Toukan <tariqt@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jarod Wilson authored
mvneta: min_mtu 68, max_mtu 9676 - mtu validation routine mostly did range check, merge back into mvneta_change_mtu for simplicity mvpp2: min_mtu 68, max_mtu 9676 - mtu validation routine mostly did range check, merge back into mvpp2_change_mtu for simplicity pxa168_eth: min_mtu 68, max_mtu 9500 skge: min_mtu 60, max_mtu 9000 sky2: min_mtu 68, max_mtu 1500 or 9000, depending on hw CC: netdev@vger.kernel.org CC: Mirko Lindner <mlindner@marvell.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Jarod Wilson authored
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jarod Wilson authored
tg3: min_mtu 60, max_mtu 9000/1500 bnxt: min_mtu 60, max_mtu 9000 bnx2x: min_mtu 46, max_mtu 9600 - Fix up ETH_OVREHEAD -> ETH_OVERHEAD while we're in here, remove duplicated defines from bnx2x_link.c. bnx2: min_mtu 46, max_mtu 9000 - Use more standard ETH_* defines while we're at it. bcm63xx_enet: min_mtu 46, max_mtu 2028 - compute_hw_mtu was made largely pointless, and thus merged back into bcm_enet_change_mtu. b44: min_mtu 60, max_mtu 1500 CC: netdev@vger.kernel.org CC: Michael Chan <michael.chan@broadcom.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Ariel Elior <ariel.elior@qlogic.com> CC: Dept-HSGLinuxNICDev@qlogic.com CC: Siva Reddy Kallam <siva.kallam@broadcom.com> CC: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
-
Jarod Wilson authored
atl2: min_mtu 40, max_mtu 1504 - Remove a few redundant defines that already have equivalents in if_ether.h. atl1: min_mtu 42, max_mtu 10218 atl1e: min_mtu 42, max_mtu 8170 atl1c: min_mtu 42, max_mtu 6122/1500 - GbE hardware gets a max_mtu of 6122, slower hardware gets 1500. alx: min_mtu 34, max_mtu 9256 - Not so sure that minimum MTU number is really what was intended, but that's what the math actually makes it out to be, due to max_frame manipulations and comparison in alx_change_mtu, rather than just comparing new_mtu. (I think 68 was the intended min_mtu value). CC: netdev@vger.kernel.org CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> Signed-off-by:
-
David S. Miller authored
Mugunthan V N says: ==================== add support for impedance control for TI dp83867 phy and fix 2nd ethernet on dra72 rev C evm Add support for configurable impedance control for TI dp83867 phy via devicetree. More documentation in [1]. CPSW second ethernet is not working, fix it by enabling impedance configuration on the phy. Verified the patch on DRA72 Rev C evm, logs at [2]. Also pushed a branch [3] for others to test. Changes from v3: * Fixup change log text and no code changes. Changes from v2: * Fixed a typo in dts and driver. Changes from initial version: * As per Sekhar's comment, instead of passing impedance values, change to max and min impedance from DT * Adopted phy_read_mmd_indirect() to cunnrent implementation. * Corrected the phy delay timings to the optimal value. [1] - http://www.ti.com/lit/ds/symlink/dp83867ir.pdf [2] - http://pastebin.ubuntu.com/23343139/ [3] - git://git.ti.com/~mugunthanvnm/ti-linux-kernel/linux.git dp83867-v4 ==================== Signed-off-by:
-
Mugunthan V N authored
The current delay settings of the phy are not the optimal value, fix it with correct values. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Mugunthan V N authored
The default impedance settings of the phy is not the optimal value, due to this the second ethernet is not working. Fix it with correct values which makes the second ethernet port to work. Signed-off-by:
-
Mugunthan V N authored
Add support for programmable MAC impedance configuration Signed-off-by:
-
Mugunthan V N authored
Add documention of ti,min-output-impedance and ti,max-output-impedance which can be used to correct MAC impedance mismatch using phy extended registers. Signed-off-by:
-
Tobias Klauser authored
args.u.name_type is of type unsigned int and is always >= 0. This fixes the following GCC warning: net/8021q/vlan.c: In function ‘vlan_ioctl_handler’: net/8021q/vlan.c:574:14: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 17 Oct, 2016 14 commits
-
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 39339616 ("fsl/fman: Add FMan MAC driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Jakub Kicinski authored
Check is for max_mtu but message reports min_mtu. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENODEV from the of_phy_connect() error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Arnd Bergmann authored
phys_addr_t may be wider than a pointer and has to be printed using the special %pap format string, as pointed out by this new warning. arch/x86/include/../../../drivers/net/fjes/fjes_trace.h: In function ‘trace_raw_output_fjes_hw_start_debug_req’: arch/x86/include/../../../drivers/net/fjes/fjes_trace.h:212:563: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] Note that this has to pass the address by reference instead of casting it to a different type. Fixes: b6ba737d ("fjes: ethtool -w and -W support for fjes driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Interrupt support for mv88e6xxx This patchset add interrupt controller support to the MV88E6xxx. This allows access to the interrupts the internal PHY generate. These interrupts can then be associated to a PHY device in the device tree and used by the PHY lib, rather than polling. Since interrupt handling needs to make MDIO bus accesses, threaded interrupts are used. The phylib needs to request the PHY interrupt using the threaded IRQ API. This in term allows some simplification to the code, in that the phylib interrupt handler can directly call phy_change(), rather than use a work queue. The work queue is however retained for the phy_mac_interrupt() call, which can be called in hard interrupt context. Since RFC v1: Keep phy_mac_interrupt() callable in hard IRQ context. The fix to trigger the phy state machine transitions on interrupts has already been submitted, so is dropped from here. Added back shared interrupts support. ==================== Signed-off-by: -
Andrew Lunn authored
The Switches use GPIO lines to indicate interrupts from two of the switches. With these interrupts in place, we can make use of the interrupt controllers within the switch to indicate when the internal PHYs generate an interrupt. Use standard PHY properties to do this. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Using the fixed name "phy_interrupt" is not very informative in /proc/interrupts when there are a lot of phys, e.g. a device with an Ethernet switch. So when requesting the interrupt, use the name of the phy. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
The PHY interrupts are now handled in a threaded interrupt handler, which can sleep. The work queue is no longer needed, phy_change() can be called directly. phy_mac_interrupt() still needs to be safe to call in interrupt context, so keep the work queue, and use a helper to call phy_change(). Signed-off-by:
-
Andrew Lunn authored
The interrupt lines from PHYs maybe connected to I2C bus expanders, or from switches on MDIO busses. Such interrupts are sourced from devices which sleep, so use threaded interrupts. Threaded interrupts require that the interrupt requester also uses the threaded API. Change the phylib to use the threaded API, which is backwards compatible with none-threaded IRQs. Signed-off-by:
-
Andrew Lunn authored
The switch can have up to two interrupt controllers. One of these contains the interrupts from the integrated PHYs, so is useful to export. The Marvell PHY driver can then be used in interrupt mode, rather than polling, speeding up PHY handling and reducing load on the MDIO bus. Signed-off-by:
-
Joe Perches authored
rds_conn_path_error already prefixes "RDS:" to the output. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Joe Perches authored
This macro's last use was removed in commit d769ef81 ("RDS: Update rds_conn_shutdown to work with rds_conn_path") so make the macro and the __rds_conn_error function definition and declaration disappear. Signed-off-by:
-
Tobias Klauser authored
There is no need to call ether_setup after alloc_ethdev since it was already called there. Signed-off-by:
-
Tom Herbert authored
If the gateway is set on an ILA route we don't need to bother with using the destination cache in the ILA route. Translation does not change the routing in this case so we can stick with orig_output in the lwstate output function. Tested: Ran netperf with and without gateway for LWT route. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
- 15 Oct, 2016 1 commit
-
-
Julia Lawall authored
This l3mdev_ops structure is only stored in the l3mdev_ops field of a net_device structure. This field is declared const, so the l3mdev_ops structure can be declared as const also. Additionally drop the __read_mostly annotation. The semantic patch that adds const is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct l3mdev_ops i@p = { ... }; @ok@ identifier r.i; struct net_device *e; position p; @@ e->l3mdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct l3mdev_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct l3mdev_ops i = { ... }; // </smpl> The effect on the layout of the .o file is shown by the following output of the size command, first before then after the transformation: text data bss dec hex filename 7364 466 52 7882 1eca drivers/net/ipvlan/ipvlan_main.o 7412 434 52 7898 1eda drivers/net/ipvlan/ipvlan_main.o Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
