Pull drm fixes from Dave Airlie:
 "From the maintainer summit, just some last minute fixes for final:

  lima:
   - fix gem_wait ioctl

  core:
   - constify modes list

  i915:
   - DP MST high color depth regression
   - GPU hangs on vulkan compute workloads"

* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
  drm/lima: fix lima_gem_wait() return value
  drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
  drm/i915: Limit MST to <= 8bpc once again
  drm/modes: Make the whitelist more const

Pull cgroup fix from Tejun Heo:
 "Roman found and fixed a bug in the cgroup2 freezer which allows new
  child cgroup to escape frozen state"

* 'for-5.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: freezer: fix frozen state inheritance
  kselftests: cgroup: add freezer mkdir test

Pull btrfs fixes from David Sterba:
 "Here are two fixes, one of them urgent fixing a bug introduced in 5.2
  and reported by many users. It took time to identify the root cause,
  catching the 5.3 release is higly desired also to push the fix to 5.2
  stable tree.

  The bug is a mess up of return values after adding proper error
  handling and honestly the kind of bug that can cause sleeping
  disorders until it's caught. My appologies to everybody who was
  affected.

  Summary of what could happen:

  1) either a hang when committing a transaction, if this happens
     there's no risk of corruption, still the hang is very inconvenient
     and can't be resolved without a reboot

  2) writeback for some btree nodes may never be started and we end up
     committing a transaction without noticing that, this is really
     serious and that will lead to the "parent transid verify failed"
     messages"

* tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix unwritten extent buffers and hangs on future writeback attempts
  Btrfs: fix assertion failure during fsync and use of stale transaction

If a new child cgroup is created in the frozen cgroup hierarchy
(one or more of ancestor cgroups is frozen), the CGRP_FREEZE cgroup
flag should be set. Otherwise if a process will be attached to the
child cgroup, it won't become frozen.

The problem can be reproduced with the test_cgfreezer_mkdir test.

This is the output before this patch:
  ~/test_freezer
  ok 1 test_cgfreezer_simple
  ok 2 test_cgfreezer_tree
  ok 3 test_cgfreezer_forkbomb
  Cgroup /sys/fs/cgroup/cg_test_mkdir_A/cg_test_mkdir_B isn't frozen
  not ok 4 test_cgfreezer_mkdir
  ok 5 test_cgfreezer_rmdir
  ok 6 test_cgfreezer_migrate
  ok 7 test_cgfreezer_ptrace
  ok 8 test_cgfreezer_stopped
  ok 9 test_cgfreezer_ptraced
  ok 10 test_cgfreezer_vfork

And with this patch:
  ~/test_freezer
  ok 1 test_cgfreezer_simple
  ok 2 test_cgfreezer_tree
  ok 3 test_cgfreezer_forkbomb
  ok 4 test_cgfreezer_mkdir
  ok 5 test_cgfreezer_rmdir
  ok 6 test_cgfreezer_migrate
  ok 7 test_cgfreezer_ptrace
  ok 8 test_cgfreezer_stopped
  ok 9 test_cgfreezer_ptraced
  ok 10 test_cgfreezer_vfork
Reported-by: Mark Crossen <mcrossen@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 76f969e8 ("cgroup: cgroup v2 freezer")
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Tejun Heo <tj@kernel.org>

Add a new cgroup freezer selftest, which checks that if a cgroup is
frozen, their new child cgroups will properly inherit the frozen
state.

It creates a parent cgroup, freezes it, creates a child cgroup
and populates it with a dummy process. Then it checks that both
parent and child cgroup are frozen.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

The userptr put_pages can be called from inside try_to_unmap, and so
enters with the page lock held on one of the object's backing pages. We
cannot take the page lock ourselves for fear of recursion.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Martin Wilck <Martin.Wilck@suse.com>
Reported-by: Leo Kraav <leho@kraav.com>
Fixes: aa56a292 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: https://bugzilla.kernel.org/show_bug.cgi?id=203317Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clone3 fix from Christian Brauner:
 "This is a last-minute bugfix for clone3() that should go in before we
  release 5.3 with clone3().

  clone3() did not verify that the exit_signal argument was set to a
  valid signal. This can be used to cause a crash by specifying a signal
  greater than NSIG. e.g. -1.

  The commit from Eugene adds a check to copy_clone_args_from_user() to
  verify that the exit signal is limited by CSIGNAL as with legacy
  clone() and that the signal is valid. With this we don't get the
  legacy clone behavior were an invalid signal could be handed down and
  would only be detected and then ignored in do_notify_parent(). Users
  of clone3() will now get a proper error right when they pass an
  invalid exit signal. Note, that this is not a change in user-visible
  behavior since no kernel with clone3() has been released yet"

* tag 'for-linus-20190912' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  fork: block invalid exit signals with clone3()

Pull x86 fixes from Ingo Molnar:
 "A KVM guest fix, and a kdump kernel relocation errors fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timer: Force PIT initialization when !X86_FEATURE_ARAT
  x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors

drm-misc-fixes for v5.3 final:
- Constify modes whitelist harder.
- Fix lima driver gem_wait ioctl.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/99e52e7a-d4ce-6a2c-0501-bc559a710955@linux.intel.com

Merge tag 'drm-intel-fixes-2019-09-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Final drm/i915 fixes for v5.3:
- Fox DP MST high color depth regression
- Fix GPU hangs on Vulkan compute workloads
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/877e6e27qm.fsf@intel.com

Previously, higher 32 bits of exit_signal fields were lost when copied
to the kernel args structure (that uses int as a type for the respective
field). Moreover, as Oleg has noted, exit_signal is used unchecked, so
it has to be checked for sanity before use; for the legacy syscalls,
applying CSIGNAL mask guarantees that it is at least non-negative;
however, there's no such thing is done in clone3() code path, and that
can break at least thread_group_leader.

This commit adds a check to copy_clone_args_from_user() to verify that
the exit signal is limited by CSIGNAL as with legacy clone() and that
the signal is valid. With this we don't get the legacy clone behavior
were an invalid signal could be handed down and would only be detected
and ignored in do_notify_parent(). Users of clone3() will now get a
proper error when they pass an invalid exit signal. Note, that this is
not user-visible behavior since no kernel with clone3() has been
released yet.

The following program will cause a splat on a non-fixed clone3() version
and will fail correctly on a fixed version:

 #define _GNU_SOURCE
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <sched.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/syscall.h>
 #include <sys/wait.h>
 #include <unistd.h>

 int main(int argc, char *argv[])
 {
        pid_t pid = -1;
        struct clone_args args = {0};
        args.exit_signal = -1;

        pid = syscall(__NR_clone3, &args, sizeof(struct clone_args));
        if (pid < 0)
                exit(EXIT_FAILURE);

        if (pid == 0)
                exit(EXIT_SUCCESS);

        wait(NULL);

        exit(EXIT_SUCCESS);
 }

Fixes: 7f192e3c ("fork: add clone3")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Link: https://lore.kernel.org/r/4b38fa4ce420b119a4c6345f42fe3cec2de9b0b5.1568223594.git.esyr@redhat.com
[christian.brauner@ubuntu.com: simplify check and rework commit message]
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

The lock_extent_buffer_io() returns 1 to the caller to tell it everything
went fine and the callers needs to start writeback for the extent buffer
(submit a bio, etc), 0 to tell the caller everything went fine but it does
not need to start writeback for the extent buffer, and a negative value if
some error happened.

When it's about to return 1 it tries to lock all pages, and if a try lock
on a page fails, and we didn't flush any existing bio in our "epd", it
calls flush_write_bio(epd) and overwrites the return value of 1 to 0 or
an error. The page might have been locked elsewhere, not with the goal
of starting writeback of the extent buffer, and even by some code other
than btrfs, like page migration for example, so it does not mean the
writeback of the extent buffer was already started by some other task,
so returning a 0 tells the caller (btree_write_cache_pages()) to not
start writeback for the extent buffer. Note that epd might currently have
either no bio, so flush_write_bio() returns 0 (success) or it might have
a bio for another extent buffer with a lower index (logical address).

Since we return 0 with the EXTENT_BUFFER_WRITEBACK bit set on the
extent buffer and writeback is never started for the extent buffer,
future attempts to writeback the extent buffer will hang forever waiting
on that bit to be cleared, since it can only be cleared after writeback
completes. Such hang is reported with a trace like the following:

  [49887.347053] INFO: task btrfs-transacti:1752 blocked for more than 122 seconds.
  [49887.347059]       Not tainted 5.2.13-gentoo #2
  [49887.347060] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [49887.347062] btrfs-transacti D    0  1752      2 0x80004000
  [49887.347064] Call Trace:
  [49887.347069]  ? __schedule+0x265/0x830
  [49887.347071]  ? bit_wait+0x50/0x50
  [49887.347072]  ? bit_wait+0x50/0x50
  [49887.347074]  schedule+0x24/0x90
  [49887.347075]  io_schedule+0x3c/0x60
  [49887.347077]  bit_wait_io+0x8/0x50
  [49887.347079]  __wait_on_bit+0x6c/0x80
  [49887.347081]  ? __lock_release.isra.29+0x155/0x2d0
  [49887.347083]  out_of_line_wait_on_bit+0x7b/0x80
  [49887.347084]  ? var_wake_function+0x20/0x20
  [49887.347087]  lock_extent_buffer_for_io+0x28c/0x390
  [49887.347089]  btree_write_cache_pages+0x18e/0x340
  [49887.347091]  do_writepages+0x29/0xb0
  [49887.347093]  ? kmem_cache_free+0x132/0x160
  [49887.347095]  ? convert_extent_bit+0x544/0x680
  [49887.347097]  filemap_fdatawrite_range+0x70/0x90
  [49887.347099]  btrfs_write_marked_extents+0x53/0x120
  [49887.347100]  btrfs_write_and_wait_transaction.isra.4+0x38/0xa0
  [49887.347102]  btrfs_commit_transaction+0x6bb/0x990
  [49887.347103]  ? start_transaction+0x33e/0x500
  [49887.347105]  transaction_kthread+0x139/0x15c

So fix this by not overwriting the return value (ret) with the result
from flush_write_bio(). We also need to clear the EXTENT_BUFFER_WRITEBACK
bit in case flush_write_bio() returns an error, otherwise it will hang
any future attempts to writeback the extent buffer, and undo all work
done before (set back EXTENT_BUFFER_DIRTY, etc).

This is a regression introduced in the 5.2 kernel.

Fixes: 2e3c2513 ("btrfs: extent_io: add proper error handling to lock_extent_buffer_for_io()")
Fixes: f4340622 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
Reported-by: Zdenek Sojka <zsojka@seznam.cz>
Link: https://lore.kernel.org/linux-btrfs/GpO.2yos.3WGDOLpx6t%7D.1TUDYM@seznam.cz/T/#uReported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Link: https://lore.kernel.org/linux-btrfs/5c4688ac-10a7-fb07-70e8-c5d31a3fbb38@profihost.ag/T/#tReported-by: Drazen Kacar <drazen.kacar@oradian.com>
Link: https://lore.kernel.org/linux-btrfs/DB8PR03MB562876ECE2319B3E579590F799C80@DB8PR03MB5628.eurprd03.prod.outlook.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204377Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.

That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.

In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:

1) evict_refill_and_join() will often change the transaction handle's
   block reserve (->block_rsv) and set its ->bytes_reserved field to a
   value greater than 0. If evict_refill_and_join() never commits the
   transaction, the eviction handler ends up decreasing the reference
   count (->use_count) of the transaction handle through the call to
   btrfs_end_transaction(), and after that point we have a transaction
   handle with a NULL ->block_rsv (which is the value prior to the
   transaction join from evict_refill_and_join()) and a ->bytes_reserved
   value greater than 0. If after the eviction/iput completes the inode
   logging path hits an error or it decides that it must fallback to a
   transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
   non-zero value from btrfs_log_dentry_safe(), and because of that
   non-zero value it tries to commit the transaction using a handle with
   a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
   the transaction commit hit an assertion failure at
   btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
   the ->block_rsv is NULL. The produced stack trace for that is like the
   following:

   [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
   [192922.917553] ------------[ cut here ]------------
   [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
   [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
   [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G        W         5.1.4-btrfs-next-47 #1
   [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
   [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
   (...)
   [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
   [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
   [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
   [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
   [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
   [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
   [192922.923200] FS:  00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
   [192922.923579] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
   [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [192922.925105] Call Trace:
   [192922.925505]  btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
   [192922.925911]  btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
   [192922.926324]  btrfs_sync_file+0x44c/0x490 [btrfs]
   [192922.926731]  do_fsync+0x38/0x60
   [192922.927138]  __x64_sys_fdatasync+0x13/0x20
   [192922.927543]  do_syscall_64+0x60/0x1c0
   [192922.927939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   (...)
   [192922.934077] ---[ end trace f00808b12068168f ]---

2) If evict_refill_and_join() decides to commit the transaction, it will
   be able to do it, since the nested transaction join only increments the
   transaction handle's ->use_count reference counter and it does not
   prevent the transaction from getting committed. This means that after
   eviction completes, the fsync logging path will be using a transaction
   handle that refers to an already committed transaction. What happens
   when using such a stale transaction can be unpredictable, we are at
   least having a use-after-free on the transaction handle itself, since
   the transaction commit will call kmem_cache_free() against the handle
   regardless of its ->use_count value, or we can end up silently losing
   all the updates to the log tree after that iput() in the logging path,
   or using a transaction handle that in the meanwhile was allocated to
   another task for a new transaction, etc, pretty much unpredictable
   what can happen.

In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).

The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull virtio fixes from Michael Tsirkin:
 "Last minute bugfixes.

  A couple of security things.

  And an error handling bugfix that is never encountered by most people,
  but that also makes it kind of safe to push at the last minute, and it
  helps push the fix to stable a bit sooner"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: make sure log_num < in_num
  vhost: block speculation of translated descriptors
  virtio_ring: fix unmap of indirect descriptors

Pull perf fix from Ingo Molnar:
 "Fix an initialization bug in the hw-breakpoints, which triggered on
  the ARM platform"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hw_breakpoint: Fix arch_hw_breakpoint use-before-initialization

Pull irq fix from Ingo Molnar:
 "Fix a race in the IRQ resend mechanism, which can result in a NULL
  dereference crash"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent NULL pointer dereference in resend_irqs()

Pull pin control fix from Linus Walleij:
 "Hopefully last pin control fix: a single patch for some Aspeed
  problems. The BMCs are much happier now"

* tag 'pinctrl-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: aspeed: Fix spurious mux failures on the AST2500

Pull GPIO fixes from Linus Walleij:
 "I don't really like to send so many fixes at the very last minute, but
  the bug-sport activity is unpredictable.

  Four fixes, three are -stable material that will go everywhere, one is
  for the current cycle:

   - An ACPI DSDT error fixup of the type we always see and Hans
     invariably gets to fix.

   - A OF quirk fix for the current release (v5.3)

   - Some consistency checks on the userspace ABI.

   - A memory leak"

* tag 'gpio-v5.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist
  gpiolib: of: fix fallback quirks handling
  gpio: fix line flag validation in lineevent_create
  gpio: fix line flag validation in linehandle_create
  gpio: mockup: add missing single_release()

Commit 674fa8da ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
was determined to be a partial fix to the problem of acquiring the LPC
Host Controller and GFX regmaps: The AST2500 pin controller may need to
fetch syscon regmaps during expression evaluation as well as when
setting mux state. For example, this case is hit by attempting to export
pins exposing the LPC Host Controller as GPIOs.

An optional eval() hook is added to the Aspeed pinmux operation struct
and called from aspeed_sig_expr_eval() if the pointer is set by the
SoC-specific driver. This enables the AST2500 to perform the custom
action of acquiring its regmap dependencies as required.

John Wang tested the fix on an Inspur FP5280G2 machine (AST2500-based)
where the issue was found, and I've booted the fix on Witherspoon
(AST2500) and Palmetto (AST2400) machines, and poked at relevant pins
under QEMU by forcing mux configurations via devmem before exporting
GPIOs to exercise the driver.

Fixes: 7d29ed88 ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers")
Fixes: 674fa8da ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
Reported-by: John Wang <wangzqbj@inspur.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Link: https://lore.kernel.org/r/20190829071738.2523-1-andrew@aj.id.auSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The code assumes log_num < in_num everywhere, and that is true as long as
in_num is incremented by descriptor iov count, and log_num by 1. However
this breaks if there's a zero sized descriptor.

As a result, if a malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash by overflowing the log array. This
bug can be triggered during the VM migration.

There's no need to log when desc.len = 0, so just don't increment log_num
in this case.

Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server")
Cc: stable@vger.kernel.org
Reviewed-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: ruippan <ruippan@tencent.com>
Signed-off-by: yongduan <yongduan@tencent.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

iovec addresses coming from vhost are assumed to be
pre-validated, but in fact can be speculated to a value
out of range.

Userspace address are later validated with array_index_nospec so we can
be sure kernel info does not leak through these addresses, but vhost
must also not leak userspace info outside the allowed memory table to
guests.

Following the defence in depth principle, make sure
the address is not validated out of node range.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>

Another day; another DSDT bug we need to workaround...

Since commit ca876c74 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: Ian W MORRISON <ianwmorrison@gmail.com>
Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c74 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.comAcked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull ipc regression fixes from Arnd Bergmann:
 "Fix ipc regressions from y2038 patches

  These are two regression fixes for bugs that got introduced during the
  system call rework that went into linux-5.1 but only bisected and
  fixed now:

   - One patch affects semtimedop() on many of the less common 32-bit
     architectures, this just needs a single-line bugfix.

   - The other affects only sparc64 and has a slightly more invasive
     workaround to apply the same change to sparc64 that was done to the
     generic code used everywhere else"

* tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ipc: fix sparc64 ipc() wrapper
  ipc: fix semtimedop for generic 32-bit architectures

We should only try to execute fallback quirks handling when previous
call returned -ENOENT, and not when we did not get -EPROBE_DEFER.
The other errors should be treated as hard errors: we did find the GPIO
description, but for some reason we failed to handle it properly.

The fallbacks should only be executed when previous handlers returned
-ENOENT, which means the mapping/description was not found.

Also let's remove the explicit deferral handling when iterating through
GPIO suffixes: it is not needed anymore as we will not be calling
fallbacks for anything but -ENOENT.

Fixes: df451f83 ("gpio: of: fix Freescale SPI CS quirk handling")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190903231856.GA165165@dtor-wsReviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-v5.4-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio: fixes for v5.4

- fix a memory leak in gpio-mockup
- fix two flag validation bugs in gpiolib's character device ioctl()'s

drm_gem_reservation_object_wait() returns 0 if it succeeds and -ETIME
if it timeouts, but lima driver assumed that 0 is error.

Cc: stable@vger.kernel.org
Fixes: a1d2a633 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190908024800.23229-1-anarsoul@gmail.com

Merge tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "This is obviouly very late, containing three small and simple driver
  specific fixes.

  The main one is the TWL fix, this fixes issues with cpufreq on the
  PMICs used with BeagleBoard generation OMAP SoCs which had been broken
  due to changes in the generic OPP code exposing a bug in the regulator
  driver for these devices causing them to think that OPPs weren't
  supported on the system.

  Sorry about sending this so late, I hadn't registered that the TWL
  issue manifested in cpufreq"

* tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl: voltage lists for vdd1/2 on twl4030
  regulator: act8945a-regulator: fix ldo register addresses in set_mode hook
  regulator: slg51000: Fix a couple NULL vs IS_ERR() checks

The function virtqueue_add_split() DMA-maps the scatterlist buffers. In
case a mapping error occurs the already mapped buffers must be unmapped.
This happens by jumping to the 'unmap_release' label.

In case of indirect descriptors the release is wrong and may leak kernel
memory. Because the implementation assumes that the head descriptor is
already mapped it starts iterating over the descriptor list starting
from the head descriptor. However for indirect descriptors the head
descriptor is never mapped in case of an error.

The fix is to initialize the start index with zero in case of indirect
descriptors and use the 'desc' pointer directly for iterating over the
descriptor chain.
Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This bit was fliped on for "syncing dependencies between camera and
graphics". BSpec has no recollection why, and it is causing
unrecoverable GPU hangs with Vulkan compute workloads.

From BSpec, setting bit5 to 0 enables relaxed padding requirements for
buffers, 1D and 2D non-array, non-MSAA, non-mip-mapped linear surfaces;
and *must* be set to 0h on skl+ to ensure "Out of Bounds" case is
suppressed.
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Fixes: 8424171e ("drm/i915/gen9: h/w w/a: syncing dependencies between camera and graphics")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: denys.kostin@globallogic.com
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904100707.7377-1-chris@chris-wilson.co.uk
(cherry picked from commit 9d7b01e9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

My attempt at allowing MST to use the higher color depths has
regressed some configurations. Apparently people have setups
where all MST streams will fit into the DP link with 8bpc but
won't fit with higher color depths.

What we really should be doing is reducing the bpc for all the
streams on the same link until they start to fit. But that requires
a bit more work, so in the meantime let's revert back closer to
the old behavior and limit MST to at most 8bpc.

Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Tested-by: Geoffrey Bennett <gmux22@gmail.com>
Fixes: f1477219 ("drm/i915: Remove the 8bpc shackles from DP MST")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111505Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828102059.2512-1-ville.syrjala@linux.intel.comReviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 75427b2a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.

Fixes: 2a9e2740 ("gpio: mockup: rework debugfs interface")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Pull section attribute fix from Miguel Ojeda:
 "Fix Oops in Clang-compiled kernels (Nick Desaulniers)"

* tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux:
  include/linux/compiler.h: fix Oops for Clang-compiled kernels

Pull GPIO fixes from Linus Walleij:
 "All related to the PCA953x driver when handling chips with more than 8
  ports, now that works again"

* tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: use pca953x_read_regs instead of regmap_bulk_read
  gpio: pca953x: correct type of reg_direction

GCC unescapes escaped string section names while Clang does not. Because
__section uses the `#` stringification operator for the section name, it
doesn't need to be escaped.

This fixes an Oops observed in distro's that use systemd and not
net.core.bpf_jit_enable=1, when their kernels are compiled with Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/619
Link: https://bugs.llvm.org/show_bug.cgi?id=42950
Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2
Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/Acked-by: Will Deacon <will@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[Cherry-picked from the __section cleanup series for 5.3]
[Adjusted commit message]
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

KVM guests with commit c8c40767 ("x86/timer: Skip PIT initialization on
modern chipsets") applied to guest kernel have been observed to have
unusually higher CPU usage with symptoms of increase in vm exits for HLT
and MSW_WRITE (MSR_IA32_TSCDEADLINE).

This is caused by older QEMUs lacking support for X86_FEATURE_ARAT.  lapic
clock retains CLOCK_EVT_FEAT_C3STOP and nohz stays inactive.  There's no
usable broadcast device either.

Do the PIT initialization if guest CPU lacks X86_FEATURE_ARAT.  On real
hardware it shouldn't matter as ARAT and DEADLINE come together.

Fixes: c8c40767 ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This reverts commit 558682b5.

Chris Wilson reports that it breaks his CPU hotplug test scripts.  In
particular, it breaks offlining and then re-onlining the boot CPU, which
we treat specially (and the BIOS does too).

The symptoms are that we can offline the CPU, but it then does not come
back online again:

    smpboot: CPU 0 is now offline
    smpboot: Booting Node 0 Processor 0 APIC 0x0
    smpboot: do_boot_cpu failed(-1) to wakeup CPU#0

Thomas says he knows why it's broken (my personal suspicion: our magic
handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix
is to just revert it, since we've never touched the LDR bits before, and
it's not worth the risk to do anything else at this stage.

[ Hotpluging of the boot CPU is special anyway, and should be off by
  default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the
  cpu0_hotplug kernel parameter.

  In general you should not do it, and it has various known limitations
  (hibernate and suspend require the boot CPU, for example).

  But it should work, even if the boot CPU is special and needs careful
  treatment       - Linus ]

Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bandan Das <bsd@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Matt bisected a sparc64 specific issue with semctl, shmctl and msgctl
to a commit from my y2038 series in linux-5.1, as I missed the custom
sys_ipc() wrapper that sparc64 uses in place of the generic version that
I patched.

The problem is that the sys_{sem,shm,msg}ctl() functions in the kernel
now do not allow being called with the IPC_64 flag any more, resulting
in a -EINVAL error when they don't recognize the command.

Instead, the correct way to do this now is to call the internal
ksys_old_{sem,shm,msg}ctl() functions to select the API version.

As we generally move towards these functions anyway, change all of
sparc_ipc() to consistently use those in place of the sys_*() versions,
and move the required ksys_*() declarations into linux/syscalls.h

The IS_ENABLED(CONFIG_SYSVIPC) check is required to avoid link
errors when ipc is disabled.
Reported-by: Matt Turner <mattst88@gmail.com>
Fixes: 275f2214 ("ipc: rename old-style shmctl/semctl/msgctl syscalls")
Cc: stable@vger.kernel.org
Tested-by: Matt Turner <mattst88@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>