- 29 Jan, 2020 40 commits
-
-
Mike Rapoport authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 8fabc623 ] Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G. If a system has more physical memory than this limit, the swiotlb buffer is not addressable because it is allocated from memblock using top-down mode. Force memblock to bottom-up mode before calling swiotlb_init() to ensure that the swiotlb buffer is DMA-able. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.orgSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Tomi Valkeinen authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit c6b16761 ] The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Phil Sutter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 16416655 ] With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Sudeep Holla authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 2a76352a ] Currently we add individual copy of same OPP table for each CPU within the cluster. This is redundant and doesn't reflect the reality. We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init() anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online() ->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug operations. It also may cause issues when the vexpress_spc_cpufreq driver is built as a module. Since ve_spc_clk_init is built-in device initcall, we should be able to use the same topology_core_cpumask to set the opp sharing cpumask via dev_pm_opp_set_sharing_cpus and use the same later in the driver via dev_pm_opp_get_sharing_cpus. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 18a110b0 ] Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10 based kernel. Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is NULL. The nfnl socket was set to NULL by netns destruction running on another cpu. The exiting network namespace calls the relevant destructors in the following order: 1. ctnetlink_net_exit_batch This nulls out the event callback pointer in struct netns. 2. nfnetlink_net_exit_batch This nulls net->nfnl socket and frees it. 3. nf_conntrack_cleanup_net_list This removes all remaining conntrack entries. This is order is correct. The only explanation for the crash so ar is: cpu1: conntrack is dying, eviction occurs: -> nf_ct_delete() -> nf_conntrack_event_report \ -> nf_conntrack_eventmask_report -> notify->fcn() (== ctnetlink_conntrack_events). cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback. b. gets interrupted. cpu2: runs netns exit handlers: a runs ctnetlink destructor, event cb pointer set to NULL. b runs nfnetlink destructor, nfnl socket is closed and set to NULL. cpu1: c. resumes and trips over NULL net->nfnl. Problem appears to be that ctnetlink_net_exit_batch only prevents future callers of nf_conntrack_eventmask_report() from obtaining the callback. It doesn't wait of other cpus that might have already obtained the callbacks address. I don't see anything in upstream kernels that would prevent similar crash: We need to wait for all cpus to have exited the event callback. Fixes: 9592a5c0 ("netfilter: ctnetlink: netns support") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Marco Elver authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 1a365e82 ] This fixes various data races in spinlock_debug. By testing with KCSAN, it is observable that the console gets spammed with data races reports, suggesting these are extremely frequent. Example data race report: read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2: debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline] do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112 __raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline] _raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873 get_partial_node mm/slub.c:1870 [inline] <snip> write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3: debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline] do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline] _raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191 spin_unlock_irqrestore include/linux/spinlock.h:393 [inline] free_debug_processing+0x1b3/0x210 mm/slub.c:1214 __slab_free+0x292/0x400 mm/slub.c:2864 <snip> As a side-effect, with KCSAN, this eventually locks up the console, most likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug -> KCSAN detects data race -> kcsan_print_report() -> printk lock -> deadlock. This fix will 1) avoid the data races, and 2) allow using lock debugging together with KCSAN. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Marco Elver <elver@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Aleksandr Yashkin authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 9e5f1c19 ] The ram_core.c routines treat przs as circular buffers. When writing a new crash dump, the old buffer needs to be cleared so that the new dump doesn't end up in the wrong place (i.e. at the end). The solution to this problem is to reset the circular buffer state before writing a new Oops dump. Signed-off-by:
Aleksandr Yashkin <a.yashkin@inango-systems.com> Signed-off-by:
Nikolay Merinov <n.merinov@inango-systems.com> Signed-off-by:
Ariel Gilman <a.gilman@inango-systems.com> Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com Fixes: 896fc1f0 ("pstore/ram: Switch to persistent_ram routines") [kees: backport to v4.9] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dmitry Vyukov authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 31b35f6b upstream. It is completely unused and implemented only on x86. Remove it. Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170526172900.91058-1-dvyukov@google.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Heiko Carstens authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 72a81ad9 ] If an SMT capable system is not IPL'ed from the first CPU the setup of the physical to logical CPU mapping is broken: the IPL core gets CPU number 0, but then the next core gets CPU number 1. Correct would be that all SMT threads of CPU 0 get the subsequent logical CPU numbers. This is important since a lot of code (like e.g. the CPU topology code) assumes that CPU maps are setup like this. If the mapping is broken the system will not IPL due to broken topology masks: [ 1.716341] BUG: arch topology broken [ 1.716342] the SMT domain not a subset of the MC domain [ 1.716343] BUG: arch topology broken [ 1.716344] the MC domain not a subset of the BOOK domain This scenario can usually not happen since LPARs are always IPL'ed from CPU 0 and also re-IPL is intiated from CPU 0. However older kernels did initiate re-IPL on an arbitrary CPU. If therefore a re-IPL from an old kernel into a new kernel is initiated this may lead to crash. Fix this by setting up the physical to logical CPU mapping correctly. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit c305c6ae ] KCSAN reported a data-race [1] While we can use READ_ONCE() on the read sides, we need to make sure hh->hh_len is written last. [1] BUG: KCSAN: data-race in eth_header_cache / neigh_resolve_output write to 0xffff8880b9dedcb8 of 4 bytes by task 29760 on cpu 0: eth_header_cache+0xa9/0xd0 net/ethernet/eth.c:247 neigh_hh_init net/core/neighbour.c:1463 [inline] neigh_resolve_output net/core/neighbour.c:1480 [inline] neigh_resolve_output+0x415/0x470 net/core/neighbour.c:1470 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 read to 0xffff8880b9dedcb8 of 4 bytes by task 29572 on cpu 1: neigh_resolve_output net/core/neighbour.c:1479 [inline] neigh_resolve_output+0x113/0x470 net/core/neighbour.c:1470 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 29572 Comm: kworker/1:4 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events rt6_probe_deferred Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Masashi Honma authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit cd486e62 ] Sometimes the hardware will push small packets that trigger a WARN_ON in mac80211. Discard them early to avoid this issue. This patch ports 2 patches from ath9k to ath9k_htc. commit 3c0efb74 "ath9k: discard undersized packets". commit df5c4150 "ath9k: correctly handle short radar pulses". [ 112.835889] ------------[ cut here ]------------ [ 112.835971] WARNING: CPU: 5 PID: 0 at net/mac80211/rx.c:804 ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.835973] Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 cfg80211 libarc4 nouveau snd_hda_codec_hdmi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_hda_codec video snd_hda_core ttm snd_hwdep drm_kms_helper snd_pcm crct10dif_pclmul snd_seq_midi drm snd_seq_midi_event crc32_pclmul snd_rawmidi ghash_clmulni_intel snd_seq aesni_intel aes_x86_64 crypto_simd cryptd snd_seq_device glue_helper snd_timer sch_fq_codel i2c_algo_bit fb_sys_fops snd input_leds syscopyarea sysfillrect sysimgblt intel_cstate mei_me intel_rapl_perf soundcore mxm_wmi lpc_ich mei kvm_intel kvm mac_hid irqbypass parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear e1000e ahci libahci wmi [ 112.836022] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.3.0-wt #1 [ 112.836023] Hardware name: MouseComputer Co.,Ltd. X99-S01/X99-S01, BIOS 1.0C-W7 04/01/2015 [ 112.836056] RIP: 0010:ieee80211_rx_napi+0xaac/0xb40 [mac80211] [ 112.836059] Code: 00 00 66 41 89 86 b0 00 00 00 e9 c8 fa ff ff 4c 89 b5 40 ff ff ff 49 89 c6 e9 c9 fa ff ff 48 c7 c7 e0 a2 a5 c0 e8 47 41 b0 e9 <0f> 0b 48 89 df e8 5a 94 2d ea e9 02 f9 ff ff 41 39 c1 44 89 85 60 [ 112.836060] RSP: 0018:ffffaa6180220da8 EFLAGS: 00010286 [ 112.836062] RAX: 0000000000000024 RBX: ffff909a20eeda00 RCX: 0000000000000000 [ 112.836064] RDX: 0000000000000000 RSI: ffff909a2f957448 RDI: ffff909a2f957448 [ 112.836065] RBP: ffffaa6180220e78 R08: 00000000000006e9 R09: 0000000000000004 [ 112.836066] R10: 000000000000000a R11: 0000000000000001 R12: 0000000000000000 [ 112.836068] R13: ffff909a261a47a0 R14: 0000000000000000 R15: 0000000000000004 [ 112.836070] FS: 0000000000000000(0000) GS:ffff909a2f940000(0000) knlGS:0000000000000000 [ 112.836071] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.836073] CR2: 00007f4e3ffffa08 CR3: 00000001afc0a006 CR4: 00000000001606e0 [ 112.836074] Call Trace: [ 112.836076] <IRQ> [ 112.836083] ? finish_td+0xb3/0xf0 [ 112.836092] ? ath9k_rx_prepare.isra.11+0x22f/0x2a0 [ath9k_htc] [ 112.836099] ath9k_rx_tasklet+0x10b/0x1d0 [ath9k_htc] [ 112.836105] tasklet_action_common.isra.22+0x63/0x110 [ 112.836108] tasklet_action+0x22/0x30 [ 112.836115] __do_softirq+0xe4/0x2da [ 112.836118] irq_exit+0xae/0xb0 [ 112.836121] do_IRQ+0x86/0xe0 [ 112.836125] common_interrupt+0xf/0xf [ 112.836126] </IRQ> [ 112.836130] RIP: 0010:cpuidle_enter_state+0xa9/0x440 [ 112.836133] Code: 3d bc 20 38 55 e8 f7 1d 84 ff 49 89 c7 0f 1f 44 00 00 31 ff e8 28 29 84 ff 80 7d d3 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 ff 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18 [ 112.836134] RSP: 0018:ffffaa61800e3e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde [ 112.836136] RAX: ffff909a2f96b340 RBX: ffffffffabb58200 RCX: 000000000000001f [ 112.836137] RDX: 0000001a458adc5d RSI: 0000000026c9b581 RDI: 0000000000000000 [ 112.836139] RBP: ffffaa61800e3e88 R08: 0000000000000002 R09: 000000000002abc0 [ 112.836140] R10: ffffaa61800e3e18 R11: 000000000000002d R12: ffffca617fb40b00 [ 112.836141] R13: 0000000000000002 R14: ffffffffabb582d8 R15: 0000001a458adc5d [ 112.836145] ? cpuidle_enter_state+0x98/0x440 [ 112.836149] ? menu_select+0x370/0x600 [ 112.836151] cpuidle_enter+0x2e/0x40 [ 112.836154] call_cpuidle+0x23/0x40 [ 112.836156] do_idle+0x204/0x280 [ 112.836159] cpu_startup_entry+0x1d/0x20 [ 112.836164] start_secondary+0x167/0x1c0 [ 112.836169] secondary_startup_64+0xa4/0xb0 [ 112.836173] ---[ end trace 9f4cd18479cc5ae5 ]--- Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Masashi Honma authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit e01fddc1 ] rs_datalen is be16 so we need to convert it before printing. Signed-off-by:
-
Daniel Axtens authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 934bda59 ] While developing KASAN for 64-bit book3s, I hit the following stack over-read. It occurs because the hypercall to put characters onto the terminal takes 2 longs (128 bits/16 bytes) of characters at a time, and so hvc_put_chars() would unconditionally copy 16 bytes from the argument buffer, regardless of supplied length. However, udbg_hvc_putc() can call hvc_put_chars() with a single-byte buffer, leading to the error. ================================================================== BUG: KASAN: stack-out-of-bounds in hvc_put_chars+0xdc/0x110 Read of size 8 at addr c0000000023e7a90 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc2-next-20190528-02824-g048a6ab4835b #113 Call Trace: dump_stack+0x104/0x154 (unreliable) print_address_description+0xa0/0x30c __kasan_report+0x20c/0x224 kasan_report+0x18/0x30 __asan_report_load8_noabort+0x24/0x40 hvc_put_chars+0xdc/0x110 hvterm_raw_put_chars+0x9c/0x110 udbg_hvc_putc+0x154/0x200 udbg_write+0xf0/0x240 console_unlock+0x868/0xd30 register_console+0x970/0xe90 register_early_udbg_console+0xf8/0x114 setup_arch+0x108/0x790 start_kernel+0x104/0x784 start_here_common+0x1c/0x534 Memory state around the buggy address: c0000000023e7980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 >c0000000023e7a80: f1 f1 01 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 ^ c0000000023e7b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Document that a 16-byte buffer is requred, and provide it in udbg. Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Imre Deak authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit d8fd3722 ] Fix the breakage resulting in the stacktrace below, due to tx queue being full when trying to send an up-reply. txmsg->seqno is -1 in this case leading to a corruption of the mstb object by txmsg->dst->tx_slots[txmsg->seqno] = NULL; in process_single_up_tx_qlock(). [ +0,005162] [drm:process_single_tx_qlock [drm_kms_helper]] set_hdr_from_dst_qlock: failed to find slot [ +0,000015] [drm:drm_dp_send_up_ack_reply.constprop.19 [drm_kms_helper]] failed to send msg in q -11 [ +0,000939] BUG: kernel NULL pointer dereference, address: 00000000000005a0 [ +0,006982] #PF: supervisor write access in kernel mode [ +0,005223] #PF: error_code(0x0002) - not-present page [ +0,005135] PGD 0 P4D 0 [ +0,002581] Oops: 0002 [#1] PREEMPT SMP NOPTI [ +0,004359] CPU: 1 PID: 1200 Comm: kworker/u16:3 Tainted: G U 5.2.0-rc1+ #410 [ +0,008433] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP, BIOS ICLSFWR1.R00.3175.A00.1904261428 04/26/2019 [ +0,013323] Workqueue: i915-dp i915_digport_work_func [i915] [ +0,005676] RIP: 0010:queue_work_on+0x19/0x70 [ +0,004372] Code: ff ff ff 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 41 56 49 89 f6 41 55 41 89 fd 41 54 55 53 48 89 d3 9c 5d fa e8 e7 81 0c 00 <f0> 48 0f ba 2b 00 73 31 45 31 e4 f7 c5 00 02 00 00 74 13 e8 cf 7f [ +0,018750] RSP: 0018:ffffc900007dfc50 EFLAGS: 00010006 [ +0,005222] RAX: 0000000000000046 RBX: 00000000000005a0 RCX: 0000000000000001 [ +0,007133] RDX: 000000000001b608 RSI: 0000000000000000 RDI: ffffffff82121972 [ +0,007129] RBP: 0000000000000202 R08: 0000000000000000 R09: 0000000000000001 [ +0,007129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88847bfa5096 [ +0,007131] R13: 0000000000000010 R14: ffff88849c08f3f8 R15: 0000000000000000 [ +0,007128] FS: 0000000000000000(0000) GS:ffff88849dc80000(0000) knlGS:0000000000000000 [ +0,008083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0,005749] CR2: 00000000000005a0 CR3: 0000000005210006 CR4: 0000000000760ee0 [ +0,007128] PKRU: 55555554 [ +0,002722] Call Trace: [ +0,002458] drm_dp_mst_handle_up_req+0x517/0x540 [drm_kms_helper] [ +0,006197] ? drm_dp_mst_hpd_irq+0x5b/0x9c0 [drm_kms_helper] [ +0,005764] drm_dp_mst_hpd_irq+0x5b/0x9c0 [drm_kms_helper] [ +0,005623] ? intel_dp_hpd_pulse+0x205/0x370 [i915] [ +0,005018] intel_dp_hpd_pulse+0x205/0x370 [i915] [ +0,004836] i915_digport_work_func+0xbb/0x140 [i915] [ +0,005108] process_one_work+0x245/0x610 [ +0,004027] worker_thread+0x37/0x380 [ +0,003684] ? process_one_work+0x610/0x610 [ +0,004184] kthread+0x119/0x130 [ +0,003240] ? kthread_park+0x80/0x80 [ +0,003668] ret_from_fork+0x24/0x50 Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190523212433.9058-1-imre.deak@intel.comSigned-off-by:
-
Leo Yan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 0e4f7f92 upstream. As the commit 677fe555 ("serial: imx: Fix recursive locking bug") has mentioned the uart driver might cause recursive locking between normal printing and the kernel debugging facilities (e.g. sysrq and oops). In the commit it gave out suggestion for fixing recursive locking issue: "The solution is to avoid locking in the sysrq case and trylock in the oops_in_progress case." This patch follows the suggestion (also used the exactly same code with other serial drivers, e.g. amba-pl011.c) to fix the recursive locking issue, this can avoid stuck caused by deadlock and print out log for sysrq and oops. Fixes: 04896a77 ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20191127141544.4277-2-leo.yan@linaro.orgSigned-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit df66499a upstream. We used to take a lock in amp_physical_cfm() but then we moved it to the caller function. Unfortunately the unlock on this error path was overlooked so it leads to a double unlock. Fixes: a514b17f ("Bluetooth: Refactor locking in amp_physical_cfm") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 3d44a6fd upstream. If setup() fails a reference for runtime PM has already been taken. Proper use of the error handling in btusb_open()is needed. You cannot just return. Fixes: ace31982 ("Bluetooth: btusb: Add setup callback for chip init on USB") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit e31f7939 upstream. The ftrace_profile->counter is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com Cc: stable@vger.kernel.org Fixes: e330b3bc ("tracing: Show sample std dev in function profiling") Fixes: 34886c8b ("tracing: add average time in function to function profiler") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit d60229d8 upstream. The return from pnp_irq is an unsigned integer type resource_size_t and hence the error check for a positive non-error code is always going to be true. A check for a non-failure return from pnp_irq should in fact be for (resource_size_t)-1 rather than >= 0. Addresses-Coverity: ("Unsigned compared against 0") Fixes: a9824c86 ("[ALSA] Add CS4232 PnP BIOS support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 256efaea upstream. gpiolib has a corner case with open drain outputs that are emulated. When such outputs are outputting a logic 1, emulation will set the hardware to input mode, which will cause gpiod_get_direction() to report that it is in input mode. This is different from the behaviour with a true open-drain output. Unify the semantics here. Cc: <stable@vger.kernel.org> Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit b2c0fcd2 upstream. These were added to blkdev_ioctl() in linux-5.5 but not blkdev_compat_ioctl, so add them now. Cc: <stable@vger.kernel.org> # v4.4+ Fixes: bbd3e064 ("block: add an API for Persistent Reservations") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 53a256a9 upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 27242021 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.deSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Amir Goldstein authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 98ca480a upstream. An ino is unsigned, so display it as such in /proc/locks. Cc: stable@vger.kernel.org Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit bbcc5672 upstream. Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by:
Paul Burton <paulburton@kernel.org> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1859640 commit 0aec96f5 upstream. Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724 driver with Infrasonic Quartet support code: namely, ice->set_rate callback gets called inside ice->reg_lock spinlock, while the callback in quartet.c holds ice->gpio_mutex. This patch fixes the invalid call: it simply moves the calls of ice->set_rate and ice->set_mclk callbacks outside the spinlock. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.deSigned-off-by:
-
Christian Brauner authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 0b8d616f ] When assiging and testing taskstats in taskstats_exit() there's a race when setting up and reading sig->stats when a thread-group with more than one thread exits: write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0: taskstats_tgid_alloc kernel/taskstats.c:567 [inline] taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 get_signal+0x2a2/0x1320 kernel/signal.c:2734 do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1: taskstats_tgid_alloc kernel/taskstats.c:559 [inline] taskstats_exit+0xb2/0x717 kernel/taskstats.c:596 do_exit+0x2c2/0x18e0 kernel/exit.c:864 do_group_exit+0xb4/0x1c0 kernel/exit.c:983 __do_sys_exit_group kernel/exit.c:994 [inline] __se_sys_exit_group kernel/exit.c:992 [inline] __x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using smp_load_acquire() and smp_store_release(). Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com Fixes: 34ec1234 ("taskstats: cleanup ->signal->stats allocation") Cc: stable@vger.kernel.org Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Acked-by:
Will Deacon <will@kernel.org> Reviewed-by:
Andrea Parri <parri.andrea@gmail.com> Reviewed-by:
-
Brian Foster authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 798a9cad ] syzbot (via KASAN) reports a use-after-free in the error path of xlog_alloc_log(). Specifically, the iclog freeing loop doesn't handle the case of a fully initialized ->l_iclog linked list. Instead, it assumes that the list is partially constructed and NULL terminated. This bug manifested because there was no possible error scenario after iclog list setup when the original code was added. Subsequent code and associated error conditions were added some time later, while the original error handling code was never updated. Fix up the error loop to terminate either on a NULL iclog or reaching the end of the list. Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit c673ec61 ] When CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not defined reserve_additional_memory() will set balloon_stats.target_pages to a wrong value in case there are still some ballooned pages allocated via alloc_xenballooned_pages(). This will result in balloon_process() no longer be triggered when ballooned pages are freed in batches. Reported-by:
Nicholas Tsirakis <niko.tsirakis@gmail.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 0539ad0b ] The s390 CPU Measurement sampling facility has an overflow condition which fires when all entries in a SBD are used. The measurement alert interrupt is triggered and reads out all samples in this SDB. It then tests the successor SDB, if this SBD is not full, the interrupt handler does not read any samples at all from this SDB The design waits for the hardware to fill this SBD and then trigger another meassurement alert interrupt. This scheme works nicely until an perf_event_overflow() function call discards the sample due to a too high sampling rate. The interrupt handler has logic to read out a partially filled SDB when the perf event overflow condition in linux common code is met. This causes the CPUM sampling measurement hardware and the PMU device driver to operate on the same SBD's trailer entry. This should not happen. This can be seen here using this trace: cpumsf_pmu_add: tear:0xb5286000 hw_perf_event_update: sdbt 0xb5286000 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 1. interrupt hw_perf_event_update: sdbt 0xb5286008 full 1 over 0 flush_all:0 hw_perf_event_update: sdbt 0xb5286008 full 0 over 0 flush_all:0 above shows 2. interrupt ... this goes on fine until... hw_perf_event_update: sdbt 0xb5286068 full 1 over 0 flush_all:0 perf_push_sample1: overflow one or more samples read from the IRQ handler are rejected by perf_event_overflow() and the IRQ handler advances to the next SDB and modifies the trailer entry of a partially filled SDB. hw_perf_event_update: sdbt 0xb5286070 full 0 over 0 flush_all:1 timestamp: 14:32:52.519953 Next time the IRQ handler is called for this SDB the trailer entry shows an overflow count of 19 missed entries. hw_perf_event_update: sdbt 0xb5286070 full 1 over 19 flush_all:1 timestamp: 14:32:52.970058 Remove access to a follow on SDB when event overflow happened. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 39d4a501 ] Function perf_event_ever_overflow() and perf_event_account_interrupt() are called every time samples are processed by the interrupt handler. However function perf_event_account_interrupt() has checks to avoid being flooded with interrupts (more then 1000 samples are received per task_tick). Samples are then dropped and a PERF_RECORD_THROTTLED is added to the perf data. The perf subsystem limit calculation is: maximum sample frequency := 100000 --> 1 samples per 10 us task_tick = 10ms = 10000us --> 1000 samples per task_tick The work flow is measurement_alert() uses SDBT head and each SBDT points to 511 SDB pages, each with 126 sample entries. After processing 8 SBDs and for each valid sample calling: perf_event_overflow() perf_event_account_interrupts() there is a considerable amount of samples being dropped, especially when the sample frequency is very high and near the 100000 limit. To avoid the high amount of samples being dropped near the end of a task_tick time frame, increment the sampling interval in case of dropped events. The CPU Measurement sampling facility on the s390 supports only intervals, specifiing how many CPU cycles have to be executed before a sample is generated. Increase the interval when the samples being generated hit the task_tick limit. Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 028288df ] In raid1_sync_request func, rdev should be checked before reference. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
EJ Hsu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit e5b5da96 ] Gadget driver should always use config_ep_by_speed() to initialize usb_ep struct according to usb device's operating speed. Otherwise, usb_ep struct may be wrong if usb devcie's operating speed is changed. The key point in this patch is that we want to make sure the desc pointer in usb_ep struct will be set to NULL when gadget is disconnected. This will force it to call config_ep_by_speed() to correctly initialize usb_ep struct based on the new operating speed when gadget is re-connected later. Reviewed-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
EJ Hsu <ejh@nvidia.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit f70267f3 ] The discovering of sas port is driven by workqueue in libsas. When libsas is processing port events or phy events in workqueue, new events may rise up and change the state of some structures such as asd_sas_phy. This may cause some problems such as follows: ==>thread 1 ==>thread 2 ==>phy up ==>phy_up_v3_hw() ==>oob_mode = SATA_OOB_MODE; ==>phy down quickly ==>hisi_sas_phy_down() ==>sas_ha->notify_phy_event() ==>sas_phy_disconnected() ==>oob_mode = OOB_NOT_CONNECTED ==>workqueue wakeup ==>sas_form_port() ==>sas_discover_domain() ==>sas_get_port_device() ==>oob_mode is OOB_NOT_CONNECTED and device is wrongly taken as expander This at last lead to the panic when libsas trying to issue a command to discover the device. [183047.614035] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [183047.622896] Mem abort info: [183047.625762] ESR = 0x96000004 [183047.628893] Exception class = DABT (current EL), IL = 32 bits [183047.634888] SET = 0, FnV = 0 [183047.638015] EA = 0, S1PTW = 0 [183047.641232] Data abort info: [183047.644189] ISV = 0, ISS = 0x00000004 [183047.648100] CM = 0, WnR = 0 [183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000b7df67be [183047.657834] [0000000000000058] pgd=0000000000000000 [183047.662789] Internal error: Oops: 96000004 [#1] SMP [183047.667740] Process kworker/u16:2 (pid: 31291, stack limit = 0x00000000417c4974) [183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1 [183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10, BIOS 0.15 10/22/2019 [183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO) [183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw] [183047.717153] sp : ffff00000f28ba60 [183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228 [183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200 [183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0 [183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228 [183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200 [183047.747464] x19: 0000000000f80800 x18: 0000000000000010 [183047.752848] x17: 0000000000000000 x16: 0000000000000000 [183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005 [183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20 [183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870 [183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0 [183047.779770] x7 : 0000000000000000 x6 : 000000000000003f [183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0 [183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007 [183047.795922] x1 : 0000000000000008 x0 : 0000000000000000 [183047.801307] Call trace: [183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw] [183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main] [183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main] [183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main] [183047.826757] smp_execute_task_sg+0xec/0x218 [183047.831013] smp_execute_task+0x74/0xa0 [183047.834921] sas_discover_expander.part.7+0x9c/0x5f8 [183047.839959] sas_discover_root_expander+0x90/0x160 [183047.844822] sas_discover_domain+0x1b8/0x1e8 [183047.849164] process_one_work+0x1b4/0x3f8 [183047.853246] worker_thread+0x54/0x470 [183047.856981] kthread+0x134/0x138 [183047.860283] ret_from_fork+0x10/0x18 [183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800) [183047.870097] kernel fault(0x1) notification starting on CPU 0 [183047.875828] kernel fault(0x1) notification finished on CPU 0 [183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE) hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE) [183047.892418] ---[ end trace 4cc26083fc11b783 ]--- [183047.897107] Kernel panic - not syncing: Fatal exception [183047.902403] kernel fault(0x5) notification starting on CPU 0 [183047.908134] kernel fault(0x5) notification finished on CPU 0 [183047.913865] SMP: stopping secondary CPUs [183047.917861] Kernel Offset: disabled [183047.921422] CPU features: 0x2,a2a00a38 [183047.925243] Memory Limit: none [183047.928372] kernel reboot(0x2) notification starting on CPU 0 [183047.934190] kernel reboot(0x2) notification finished on CPU 0 [183047.940008] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.comReported-by:
Gao Chuan <gaochuan4@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit fee92f25 ] On this error path we call qla4xxx_mem_free() and then the caller also calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a couple double frees: drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed Fixes: afaf5a2d ("[SCSI] Initial Commit of qla4xxx") Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountainSigned-off-by:
-
Roman Bolshakov authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 2c2f4bed ] MBA_PORT_UPDATE generates duplicate log lines in target mode because qlt_async_event is called twice. Drop the calls within the case as the function will be called right after the switch statement. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-8-r.bolshakov@yadro.comAcked-by:
Himanshu Madhani <hmadhani@marvel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Tested-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Bo Wu authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 9a1b0b9a ] When phba->mbox_ext_buf_ctx.seqNum != phba->mbox_ext_buf_ctx.numBuf, dd_data should be freed before return SLI_CONFIG_HANDLED. When lpfc_sli_issue_mbox func return fails, pmboxq should be also freed in job_error tag. Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E7A966@DGGEML525-MBS.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 44a7b675 ] The driver forgets to call unregister_pernet_subsys() in the error path of cma_init(). Add the missed call to fix it. Fixes: 4be74b42 ("IB/cma: Separate port allocation to network namespaces") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Link: https://lore.kernel.org/r/20191206012426.12744-1-hslester96@gmail.comSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Leonard Crestez authored
BugLink: https://bugs.launchpad.net/bugs/1859640 [ Upstream commit 42a6b25e ] Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Ioanna Alifieraki authored
BugLink: https://bugs.launchpad.net/bugs/1851243 This commit breaks r/w access to files. Since fixing it requires many commits to be backported revert it to avoid risk of regressions. For detailed description please look at LP #1851243. This reverts commit c8838e8e. Signed-off-by:
Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1853375 The packet fanout test generates UDP traffic and reads this with a pair of packet sockets, testing the various fanout algorithms. Avoid non-determinism from reading unrelated background traffic. Fanout decisions are made before unrelated packets can be dropped with a filter, so that is an insufficient strategy [*]. Run the packet socket tests in a network namespace, similar to msg_zerocopy. It it still good practice to install a filter on a packet socket before accepting traffic. Because this is example code, demonstrate that pattern. Open the socket initially bound to no protocol, install a filter, and only then bind to ETH_P_IP. Another source of non-determinism is hash collisions in FANOUT_HASH. The hash function used to select a socket in the fanout group includes the pseudorandom number hashrnd, which is not visible from userspace. To work around this, the test tries to find a pair of UDP source ports that do not collide. It gives up too soon (5 times, every 32 runs) and output is confusing. Increase tries to 20 and revise the error msg. [*] another approach would be to add a third socket to the fanout group and direct all unexpected traffic here. This is possible only when reimplementing methods like RR or HASH alongside this extra catch-all bucket, using the BPF fanout method. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
