- 04 Jan, 2017 11 commits
-
-
Andrew Lunn authored
Lookup in the ATU can be performed starting from a given MAC address. This is faster than starting with the first possible MAC address and iterating all entries. Entries are returned in numeric order. So if the MAC address returned is bigger than what we are searching for, we know it is not in the ATU. Using the benchmark provided by Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com>, https://www.spinics.net/lists/netdev/msg411550.html on an Marvell Armada 370 RD, the test to add a number of static fdb entries went from 1.616531 seconds to 0.312052 seconds. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjun V authored
t6fw-1.15.15.0 enabled compressed error vector in cpl_rx_pkt for T6. Updating driver to take care of these changes. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: E-MAC interrupt handler cleanups Here's a set of 3 patches against DaveM's 'net-next.git' repo. I'm cleaning up the E-MAC interrupt handling with the main goal of factoring out the E-MAC interrupt handler into a separate function. [1/3] sh_eth: handle only enabled E-MAC interrupts [2/3] sh_eth: no need for *else* after *goto* [3/3] sh_eth: factor out sh_eth_emac_interrupt() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The E-MAC interrupt (EESR.ECI) is not always caused by an error condition, so it really shouldn't be handled by sh_eth_error(). Factor out the E-MAC interrupt handler, sh_eth_emac_interrupt(), removing the ECI bit from the EESR's values throughout the driver... Update Cogent Embedded's copyright and clean up the whitespace in Renesas' copyright, while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
Well, checkpatch.pl complains about *else* after *return* and *break* but not after *goto*... and it probably should have complained about the code in sh_eth_error(). Win couple LoCs by removing that *else*. :-) Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The driver should only handle the enabled E-MAC interrupts, like it does for the E-DMAC interrupts since commit 3893b273 ("sh_eth: workaround for spurious ECI interrupt"), so mask ECSR with ECSIPR when reading it in sh_eth_error(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
IPvlan setup uses one mac-address (of master). The IPv6 link-local addresses are derived using the mac-address on the link. Lack of dev-ids makes these link-local addresses same for all slaves including that of master device. dev-ids are necessary to add differentiation when L2 address is shared. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The "out" label in dsa_switch_setup_one() is useless, thus remove it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prasad Kanneganti authored
liquidio driver incorrectly indicates that PTP is supported in 23XX adapters; this patch fixes that. PTP is supported in 66XX and 68XX adapters, and the driver correctly indicates that. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It must always be the case that CMSG_ALIGN(sizeof(hdr)) == sizeof(hdr). Otherwise there are missing adjustments in the various calculations that parse and build these things. Signed-off-by: David S. Miller <davem@davemloft.net>
-
yuan linyu authored
sizeof(struct cmsghdr) and sizeof(struct compat_cmsghdr) already aligned. remove use CMSG_ALIGN(sizeof(struct cmsghdr)) and CMSG_COMPAT_ALIGN(sizeof(struct compat_cmsghdr)) keep code consistent. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Jan, 2017 29 commits
-
-
Yotam Gigi authored
Fix several error paths in matchall: - Release reference to actions in case the hardware fails offloading (relevant to skip_sw only) - Fix error path in case tcf_exts initialization/validation fail Fixes: bf3994d2 ("net/sched: introduce Match-all classifier") Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-01-03 This series contains updates to ixgbe and ixgbevf only. Emil fixes ixgbe to use the NVM settings for FEC, so do not override the settings. Fixed the indirection table for x550, where newer devices can support up to 64 RSS queues. Extends the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() to avoid against a double free WARN and/or a BUG in free_msi_irqs(). Fixed AER error handling by making sure that the driver frees the IRQs in ixgbe_io_error_detected() when responding to a PCIe AER error, and to restore them when the interface recovers. Tony updates the driver to report the driver version to the firmware using the host interface command for x550 devices. Fixed the PHY reset check for x550em_ext_t PHY type. Fixed bounds checking for x540 devices to ensure the index is valid for the LED function. Fixed the BaseT adapters which support 100Mb capability and were not reporting the capability. Ken Cox adds a missing check for the trusted bit before trying to set the MACVLAN MAC address. Yusuke Suzuki fixes an issue with 82599 and x540 devices where receive timestamps were not working becase the bitwise operation for RX_HWSTAMP falg was incorrect. Don ensures that x553 KR/KX devices correctly advertise link speeds. Adds the mailbox message to allow for VF promiscuous mode support. Mark fixes two issues with EEPROM access, where the semaphore was not being held until the entire response was read and the acquiring/releasing of the semaphore is slow. Cleaned up firmware version method and functions which are no longer used. Added new interfaces for firmware commands to access some new PHYs. v2: fixed tab indentation in patch 12 and mis-spelled words in patch 15 based on feedback from Sergei Shtylyov and Rami Rosen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
This patch extends the xcast mailbox message to include support for unicast promiscuous mode. To allow a VF to enter this mode the PF must be in promiscuous mode. A later patch will add the support needed in the VF driver (ixgbevf) Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch extends the mailbox message to allow for VF promiscuous mode support. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Implement support for devices that have firmware-controlled PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Implement new interface for firmware commands to access some PHYs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
The firmware version method and functions are not used anywhere, so remove them all. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
There are two problems with EEPROM access. One is that it needs to hold the semaphore until the entire response is read or else the response can be corrupted by other firmware accesses. The second problem is that acquiring and releasing the semaphore is slow, so it should be taken and released once when multiple EEPROM accesses will be done. Both of these issues can be solved by adding a new function, ixgbe_hic_unlocked, to issue firmware commands that will assume that the caller has acquired the needed semaphore. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
This patch ensures that the advertised link speeds are configured for X553 KR/KX backplane. Without this patch the link remains at 1G when resuming from low power after being downshifted by LPLU. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Restore adapter->hw.hw_addr after handling an error, or a resume operation to make sure we can access the registers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Yusuke Suzuki authored
Rx timestamp does not work on 82599 and X540 because bitwise operation of RX_HWTSTAMP flags is incorrect and ixgbe_ptp_rx_hwtstamp() is never called. This patch fixes it to enable Rx timestamp on 82599 and X540. Without this fix: ptp4l[278.730]: selected /dev/ptp8 as PTP clock ptp4l[278.733]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.733]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.834]: port 1: received SYNC without timestamp ptp4l[278.835]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[279.834]: port 1: received SYNC without timestamp ptp4l[280.834]: port 1: received SYNC without timestamp ptp4l[281.834]: port 1: received SYNC without timestamp ptp4l[282.834]: port 1: received SYNC without timestamp ptp4l[282.835]: selected best master clock 1c3947.fffe.60f9cc ptp4l[282.835]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[283.834]: port 1: received SYNC without timestamp With this fix: ptp4l[239.154]: selected /dev/ptp8 as PTP clock ptp4l[239.157]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[239.157]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[240.989]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[244.989]: selected best master clock 1c3947.fffe.60f9cc ptp4l[244.989]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[246.977]: master offset -899583339542096 s0 freq +0 path delay 16222 ptp4l[247.977]: master offset -899583339617265 s1 freq -75169 path delay 16177 ptp4l[248.977]: master offset -130 s2 freq -75299 path delay 16177 ptp4l[248.977]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[249.977]: master offset -9 s2 freq -75217 path delay 16177 ptp4l[250.977]: master offset 88 s2 freq -75123 path delay 16132 Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Yusuke Suzuki <yus-suzuki@uf.jp.nec.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Make sure that we free the IRQs in ixgbevf_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbevf_remove() after a failed recovery from AER error because the interrupts were not freed. Also moved the down and free functions into ixgbevf_close_suspend() same as with ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Ken Cox authored
There are two methods for setting mac addresses in a Macvlan, that differentiate themselves in the function macvlan_set_mac_Address. If the macvlan mode is passthru, then we use the dev_set_mac_address method, otherwise we use the dev_uc api via macvlan_sync_addresses. The latter method (which would stem from using any non-passthru mode, like bridge, or vepa), calls down into the driver in a path that terminates in ixgbevf_set_uc_addr_vf, which sends a IXGBE_VF_SET_MACVLAN message, which causes the pf to spawn the noted error message. This occurs because it appears that the guest is trying to delete the mac address of the macvlan before adding another. The other path in macvlan_set_mac_address uses dev_set_mac_address, which calls into ixgbevf_set_mac which uses the IXGBE_VF_SET_MAC_ADDR to the pf to set the macvlan mac address. The discrepancy here is in the handlers. The handler function for IXGBE_VF_SET_MAC_ADDR (ixgbe_set_vf_mac_addr) has a check for the vfinfo[].trusted bit to allow the operation if the vf is trusted. In comparison, the IXGBE_VF_SET_MACVLAN message handler (ixgbe_set_vf_macvlan_msg) has no such check of the trusted bit. Signed-off-by: Ken Cox <jkc@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
When an interface is part of a namespace it is possible that ixgbevf_close() may be called while ixgbevf_suspend() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs() To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and check for !netif_device_present() to avoid entering close while in suspend. Also added rtnl locks to ixgbevf_queue_reset_subtask(). CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
BaseT adapters that are capable of supporting 100Mb are not reporting this capability. This patch corrects the reporting so that 100Mb is shown as supported on those adapters. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
This is an extension of commit 003287e0 ("ixgbevf: Correct parameter sent to LED function"); add bounds checking to x540 functions to ensure the index is valid. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
The generic PHY reset check we had previously is not sufficient for the ixgbe_phy_x550em_ext_t PHY type. Check 1.CC02.0 instead - same as ixgbe_init_ext_t_x550(). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
Some x550 devices require the driver version reported to its firmware; this patch sends the driver version string to the firmware through the host interface command for x550 devices. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Jon Maloy says: ==================== tipc: improve interaction socket-link We fix a very real starvation problem that may occur when a link encounters send buffer congestion. At the same time we make the interaction between the socket and link layer simpler and more consistent. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
The socket code currently handles link congestion by either blocking and trying to send again when the congestion has abated, or just returning to the user with -EAGAIN and let him re-try later. This mechanism is prone to starvation, because the wakeup algorithm is non-atomic. During the time the link issues a wakeup signal, until the socket wakes up and re-attempts sending, other senders may have come in between and occupied the free buffer space in the link. This in turn may lead to a socket having to make many send attempts before it is successful. In extremely loaded systems we have observed latency times of several seconds before a low-priority socket is able to send out a message. In this commit, we simplify this mechanism and reduce the risk of the described scenario happening. When a message is attempted sent via a congested link, we now let it be added to the link's backlog queue anyway, thus permitting an oversubscription of one message per source socket. We still create a wakeup item and return an error code, hence instructing the sender to block or stop sending. Only when enough space has been freed up in the link's backlog queue do we issue a wakeup event that allows the sender to continue with the next message, if any. The fact that a socket now can consider a message sent even when the link returns a congestion code means that the sending socket code can be simplified. Also, since this is a good opportunity to get rid of the obsolete 'mtu change' condition in the three socket send functions, we now choose to refactor those functions completely. Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
During multicast reception we currently use a simple linked list with push/pop semantics to store port numbers. We now see a need for a more generic list for storing values of type u32. We therefore make some modifications to this list, while replacing the prefix 'tipc_plist_' with 'u32_'. We also add a couple of new functions which will come to use in the next commits. Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
The functions tipc_wait_for_sndpkt() and tipc_wait_for_sndmsg() are very similar. The latter function is also called from two locations, and there will be more in the coming commits, which will all need to test on different conditions. Instead of making yet another duplicates of the function, we now introduce a new macro tipc_wait_for_cond() where the wakeup condition can be stated as an argument to the call. This macro replaces all current and future uses of the two functions, which can now be eliminated. Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sowmini Varadhan says: ==================== TPACKET_V3 TX_RING support This patch series allows an application to use a single PF_PACKET descriptor and leverage the best implementations of TX_RING and RX_RING that exist today. Patch 1 adds the kernel/Documentation changes for TX_RING support and patch2 adds the associated test case in selftests. Changes since v2: additional sanity checks for setsockopt input for TX_RING/TPACKET_V3. Refactored psock_tpacket.c test code to avoid code duplication from V2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
Add a test case and sample code for (TPACKET_V3, PACKET_TX_RING) Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-