- 27 Jan, 2020 40 commits
-
-
Stefan Wahren authored
This adds the thermal sensor driver for the Broadcom BCM2711 SoC, which is placed on the Raspberry Pi 4. The driver only provides SoC temperature reading so far. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1578941778-23321-3-git-send-email-stefan.wahren@i2se.com
-
Stefan Wahren authored
Since the BCM2711 doesn't have a AVS TMON block, the thermal information must be retrieved from the AVS ring oscillator block. This block is part of the AVS monitor which contains a bunch of raw sensors. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Yangtao Li authored
Expose sun8i thermal as a HWMON device. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
The cp_ft_flag variable is not used after initialization, so delete it. After that, THS_EFUSE_CP_FT_MASK, THS_EFUSE_CP_FT_BIT and THS_CALIBRATION_IN_FT are not needed, so delete them. Signed-off-by:
-
Yangtao Li authored
sparse returns a warning: "drivers/thermal/sun8i_thermal.c:341:60: sparse: sparse: Using plain integer as NULL pointer". Fix it by replacing the zero integer by a NULL pointer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Yangtao Li authored
According to the spec, r40 has 2 thermal sensors. Sensor0 located in the CPU, another in the GPU. Fixes: dccc5c3b ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Tested-on: sun8i-r40-bananapi-m2-ultra Signed-off-by:
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
Since commit d36e2fa0 ("thermal: generic-adc: make lookup table optional") "generic-adc-thermal" can be used with an IIO_TEMP channel. In this case the following message is logged at probe time: no lookup table, assuming DAC channel returns milliCelcius Silence this info message if the channel type is known to be in milli celsius. Keep this message when the channel type is unknown or not of type temperature. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
A "generic-adc-thermal" without "temperature-lookup-table" is perfectly valid since commit d36e2fa0 ("thermal: generic-adc: make lookup table optional"). On deferred probe the message "no lookup table, assuming DAC channel returns milliCelcius" is still logged. Prevent this message on deferred probe of the IIO channel by first looking up the IIO channel. Signed-off-by:
-
Yangtao Li authored
sun8i-thermal driver supports thermal sensor in wide range of Allwinner SoCs. Add YAML schema for its bindings. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Yangtao Li authored
This patch adds the support for allwinner thermal sensor, within allwinner SoC. It will register sensors for thermal framework and use device tree to bind cooling device. Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Daniel Lezcano authored
The function of_thermal_free_zone() is only used the initialization function which all belonging to the init section. Move it also to the __init section. Signed-off-by:
-
Daniel Lezcano authored
The function of_thermal_destroy_zones() is only used internally by the of_parse_thermal_zones() for rollbacking in case of error. Make it static and tag it as an __init function. Signed-off-by:
-
Daniel Lezcano authored
As we introduced the idle injection cooling device called cpuidle_cooling, let's be consistent and rename the cpu_cooling to cpufreq_cooling as this one mitigates with OPPs changes. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191219225317.17158-3-daniel.lezcano@linaro.org
-
Daniel Lezcano authored
The cpu idle cooling device offers a new method to cool down a CPU by injecting idle cycles at runtime. It has some similarities with the intel power clamp driver but it is actually designed to be more generic and relying on the idle injection powercap framework. The idle injection duration is fixed while the running duration is variable. That allows to have control on the device reactivity for the user experience. An idle state powering down the CPU or the cluster will allow to drop the static leakage, thus restoring the heat capacity of the SoC. It can be set with a trip point between the hot and the critical points, giving the opportunity to prevent a hard reset of the system when the cpufreq cooling fails to cool down the CPU. With more sophisticated boards having a per core sensor, the idle cooling device allows to cool down a single core without throttling the compute capacity of several cpus belonging to the same clock line, so it could be used in collaboration with the cpufreq cooling device. Signed-off-by:
-
Daniel Lezcano authored
Provide some documentation for the idle injection cooling effect in order to let people to understand the rational of the approach for the idle injection CPU cooling device. Signed-off-by:
-
Stefan Schaeckeler authored
By default, of-based thermal drivers do not enable hwmon. Explicitly enable hwmon for both, the soc and gpu temperature sensor. Signed-off-by:
Stefan Schaeckeler <schaecsn@gmx.net> Tested-by:
-
Zak Hays authored
The reset bit needs to be cleared in the init sequence otherwise it holds the block in reset. Signed-off-by:
Zachary Hays <zhays@lexmark.com> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Zak Hays authored
As shown in its device tree, Armada XP has the control1 register at 0x184d0, not 0x182d0. Signed-off-by:
-
Daniel Lezcano authored
The next changes will add a new way to cool down a CPU by injecting idle cycles. With the current configuration, a CPU cooling device is the cpufreq cooling device. As we want to add a new CPU cooling device, let's convert the CPU cooling to a choice giving a list of CPU cooling devices. At this point, there is obviously only one CPU cooling device. There is no functional changes. Signed-off-by:
-
Andrey Smirnov authored
Expose thermal readings as a HWMON device, so that it could be accessed using lm-sensors. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: linux-imx@nxp.com Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Andrey Smirnov authored
Add devres wrapper for thermal_add_hwmon_sysfs() to simplify driver code. Signed-off-by:
-
Andrey Smirnov authored
Before returning measured temperature data to upper layer we need to make sure that the reading was marked as "valid" to avoid reporting bogus data. Signed-off-by:
-
Andrey Smirnov authored
Tmu_get_temp will get called as a part of sensor registration via devm_thermal_zone_of_sensor_register(). To prevent it from retruning bogus data we need to enable sensor monitoring before that. Looking at the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in enabling them all, so, for the sake of simplicity, change the code to do just that. Signed-off-by:
-
Andrey Smirnov authored
Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify bit manipulation using regmap_update_bits(). This also allows us to convert some register initialization to use loops and adds convenient debug access to TMU registers via debugfs. Signed-off-by:
-
Andrey Smirnov authored
Driver data of underlying struct device will be set to NULL by Linux's driver infrastructure. Clearing it here is unnecessary. Signed-off-by:
-
Andrey Smirnov authored
We can simplify error cleanup code if instead of passing a "struct platform_device *" to qoriq_tmu_calibration() and deriving a bunch of pointers from it, we pass those pointers directly. This way we won't be force to call platform_set_drvdata() as early in qoriq_tmu_probe() and need to have "platform_set_drvdata(pdev, NULL);" in error path. Signed-off-by:
-
Andrey Smirnov authored
Pass all necessary data to qoriq_tmu_register_tmu_zone() directly instead of passing a platform device and then deriving it. This is done as a first step to simplify resource deallocation code. Signed-off-by:
-
Andrey Smirnov authored
Embed per-sensor data into struct qoriq_tmu_data so we can drop the code allocating it. This also allows us to get rid of per-sensor back reference to struct qoriq_tmu_data since now its address can be calculated using container_of(). Signed-off-by:
-
Andrey Smirnov authored
Add local struct qoriq_sensor pointer in qoriq_tmu_register_tmu_zone() for brevity. Signed-off-by:
-
Andrey Smirnov authored
Struct thermal_zone_device reference stored as sensor's private data isn't really used anywhere in the code. Drop it. Signed-off-by:
-
Andrey Smirnov authored
Use a local "struct device *dev" for brevity. No functional change intended. Signed-off-by:
-
Amit Kucheria authored
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/zx2967_thermal.c:57: warning: Function parameter or member 'dev' not described in 'zx2967_thermal_priv' Signed-off-by:
-
Amit Kucheria authored
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'A' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'B' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'm' not described in 'amlogic_thermal_soc_calib_data' linux.git/drivers/thermal/amlogic_thermal.c:78: warning: Function parameter or member 'n' not described in 'amlogic_thermal_soc_calib_data' Signed-off-by:
-
Amit Kucheria authored
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell' linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev' linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg' linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn' linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program' Signed-off-by:
-
Amit Kucheria authored
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/samsung/exynos_tmu.c:141: warning: bad line: driver linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tzd' not described in 'exynos_tmu_data' linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tmu_set_trip_temp' not described in 'exynos_tmu_data' linux.git/drivers/thermal/samsung/exynos_tmu.c:203: warning: Function parameter or member 'tmu_set_trip_hyst' not described in 'exynos_tmu_data' Signed-off-by:
-
Amit Kucheria authored
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed. Fixes up the following warnings when compiled with make W=1: linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot understand function prototype: 'enum tshut_mode ' linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot understand function prototype: 'enum tshut_polarity ' linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot understand function prototype: 'enum sensor_id ' linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot understand function prototype: 'enum adc_sort_mode ' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'chn_id' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'control' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function parameter or member 'sensors' not described in 'rockchip_thermal_data' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'grf' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'regs' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'grf' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'enable' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function parameter or member 'reset' not described in 'rockchip_thermal_reset_controller' Signed-off-by:
-
Amit Kucheria authored
Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed. Fixes up the following warnings when compiled with make W=1: linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8173_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2701_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt2712_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand function prototype: 'const struct mtk_thermal_data mt8183_thermal_data = ' linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter or member 'sensno' not described in 'raw_to_mcelsius' Signed-off-by:
-
Amit Kucheria authored
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/max77620_thermal.c:48: warning: Function parameter or member 'temp' not described in 'max77620_thermal_read_temp' Signed-off-by:
-
Amit Kucheria authored
Fix up the following warnings with make W=1: linux.git/drivers/thermal/devfreq_cooling.c:68: warning: Function parameter or member 'capped_state' not described in 'devfreq_cooling_device' linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Function parameter or member 'cdev' not described in 'devfreq_cooling_unregister' linux.git/drivers/thermal/devfreq_cooling.c:593: warning: Excess function parameter 'dfc' description in 'devfreq_cooling_unregister' Signed-off-by:
-
