- 06 Jun, 2024 25 commits
-
-
Paolo Abeni authored
Paul Barker says: ==================== Improve GbEth performance on Renesas RZ/G2L and related SoCs This series aims to improve performance of the GbEth IP in the Renesas RZ/G2L SoC family and the RZ/G3S SoC, which use the ravb driver. Along the way, we do some refactoring and ensure that napi_complete_done() is used in accordance with the NAPI documentation for both GbEth and R-Car code paths. Much of the performance improvement comes from enabling SW IRQ Coalescing for all SoCs using the GbEth IP, and NAPI Threaded mode for single core SoCs using the GbEth IP. These can be enabled/disabled at runtime via sysfs, but our goal is to set sensible defaults which get good performance on the affected SoCs. The rest of the performance improvement comes from using a page pool to allocate RX buffers, and reducing the allocation size from >8kB to 2kB. The overall performance impact of this patch series seen in testing with iperf3 is as follows (see patches 5-7 for more detailed results): * RZ/G2L: * TCP TX: +1.8% bandwidth * TCP RX: +1% bandwidth at 47% less CPU load * UDP RX: +1% bandwidth at 26% less CPU load * RZ/G2UL: * TCP TX: +37% bandwidth * TCP RX: +43% bandwidth * UDP TX: -8% bandwidth * UDP RX: +32500% bandwidth (!) * RZ/G3S: * TCP TX: +25% bandwidth * TCP RX: +76% bandwidth * UDP TX: -9% bandwidth * UDP RX: +37900% bandwidth (!) * RZ/Five: * TCP TX: +18% bandwidth * TCP RX: +212% bandwidth * UDP TX: +2% bandwidth * UDP RX: +inf bandwidth (test no longer crashes) There is no significant impact on bandwidth or CPU load in testing on RZ/G2H or R-Car M3N. Fixing the crash in UDP RX testing for RZ/Five is a cumulative effect of patches 1, 2, 5 & 6 so this is very difficult to break out as a bugfix for backporting. Changes v4->v5: * Added Sergey's Reviewed-by tags. * Improved the commit message for patch 2/7. * Re-wrapped to 80 cols, except where this would significantly impact readability. * Use lower case `skb` consistently in comments. * Included <net/page_pool/types.h> in ravb.h. * Moved rx_buffer_size so it is in the same place in ravb_hw_info as rx_max_desc_use was previously. * Used reverse xmas tree ordering in variable declarations. * Split lines after binary operators, instead of before. * Factor subtraction of sizeof(__sum16) out of the if condition in ravb_rx_csum_gbeth(). * Add blank lines after variable declarations where needed. * Used goto instead of break to handle napi_build_skb() failure in ravb_rx_gbeth(). Break was incorrectly scoped to the surrounding switch statement, when it's the outer loop we really want to break out of. * Used continue instead of break to handle NULL priv->rx_1st_skb in ravb_rx_gbeth() as we may still be able to process further descriptors. * Unconditionally set priv->rx_1st_skb = NULL after processing a packet in ravb_rx_gbeth(). We don't need to check die_dt as this will be a no-op for single descriptor packets. * Moved napi_build_skb() call after dma_sync_single_for_cpu() in ravb_rx_rcar() to align the order of operations with ravb_rx_gbeth() and ensure the data is sync'd before it is accessed. * Moved zeroing of rx_buff->page to the end of packet processing in ravb_rx_rcar() to align the order of operations with ravb_rx_gbeth(). Changes v3->v4: * Dependency patches have merged so this is no longer an RFC. * Fixed update of stats->rx_packets. * Simplified refactoring following feedback from Niklas and Sergey. * Renamed needs_irq_coalesce -> coalesce_irqs. * Used a separate page pool for each RX queue. * Passed struct ravb_rx_desc to ravb_alloc_rx_buffer() so that we can simplify the calling function. * Explained the calculation of rx_desc->ds_cc. * Added handling of nonlinear SKBs in ravb_rx_csum_gbeth(). * Used Niklas' suggested commit message for patch 2/7. * Added Sergey's Reviewed-by tags to patches 5/7 and 6/7. Changes v2->v3: * Incorporated feedback on RFC v2 from Sergey. * Split out bugfixes and rebased. This changed the order of what was the first 5 patches of v2 and things look a little different so I've not picked up Reviewed-by tags from v2. * Further refactoring and tidy up of RX ring refill and ravb_rx_gbeth(). * Switched to using a page pool to allocate RX buffers. * Re-tested and provided updated performance figures. Changes v1->v2: * Marked as RFC as the series depends on unmerged patches. * Refactored R-Car code paths as well as GbEth code paths. * Updated references to the patches this series depends on. ==================== Link: https://lore.kernel.org/r/20240604072825.7490-1-paul.barker.ct@bp.renesas.comSigned-off-by:Paolo Abeni <pabeni@redhat.com>
-
Paul Barker authored
This patch makes multiple changes that can't be separated: 1) Allocate plain RX buffers via a page pool instead of allocating SKBs, then use build_skb() when a packet is received. 2) For GbEth IP, reduce the RX buffer size to 2kB. 3) For GbEth IP, merge packets which span more than one RX descriptor as SKB fragments instead of copying data. Implementing (1) without (2) would require the use of an order-1 page pool (instead of an order-0 page pool split into page fragments) for GbEth. Implementing (2) without (3) would leave us no space to re-assemble packets which span more than one RX descriptor. Implementing (3) without (1) would not be possible as the network stack expects to use put_page() or page_pool_put_page() to free SKB fragments after an SKB is consumed. RX checksum offload support is adjusted to handle both linear and nonlinear (fragmented) packets. This patch gives the following improvements during testing with iperf3. * RZ/G2L: * TCP RX: same bandwidth at -43% CPU load (70% -> 40%) * UDP RX: same bandwidth at -17% CPU load (88% -> 74%) * RZ/G2UL: * TCP RX: +30% bandwidth (726Mbps -> 941Mbps) * UDP RX: +417% bandwidth (108Mbps -> 558Mbps) * RZ/G3S: * TCP RX: +64% bandwidth (562Mbps -> 920Mbps) * UDP RX: +420% bandwidth (90Mbps -> 468Mbps) * RZ/Five: * TCP RX: +217% bandwidth (145Mbps -> 459Mbps) * UDP RX: +470% bandwidth (20Mbps -> 114Mbps) There is no significant impact on bandwidth or CPU load in testing on RZ/G2H or R-Car M3N. Signed-off-by:Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
-
Paul Barker authored
NAPI Threaded mode (along with the previously enabled SW IRQ Coalescing) is required to improve network stack performance for single core SoCs using the GbEth IP (currently the RZ/G2L SoC family and the RZ/G3S SoC). This patch gives the following improvements during testing with iperf3. * RZ/G2UL: * TCP TX: +32% bandwidth (638Mbps -> 841Mbps) * TXP RX: +8.8% bandwidth (667Mbps -> 726Mbps) * UDP RX: +104% bandwidth (53Mbps -> 108Mbps) * RZ/G3S: * TCP TX: 29% bandwidth (529Mbps -> 681Mbps) * UDP RX: +1290% bandwidth (6.46Mbps -> 90Mbps) * RZ/Five: * UDP RX: Test no longer crashes (0 -> 20 Mbps) This patch gives the following reductions in performance in the same testing: * RZ/G2UL: * UDP TX: -7.5% bandwidth (594Mbps -> 549Mbps) * RZ/G3S: * UDP TX: -5% bandwidth (625Mbps -> 594Mbps) These losses are considered acceptable given the benefits shown above. If UDP TX bandwidth must be maximised for a particular use case, NAPI threaded mode can be disabled at runtime via sysfs writes. The improvement of UDP RX bandwidth for the single core SoCs (RZ/G2UL & RZ/G3S) is particularly critical. Signed-off-by: -
Paul Barker authored
Software IRQ Coalescing is required to improve network stack performance in the RZ/G2L SoC family and the RZ/G3S SoC, i.e. the SoCs which use the GbEth IP. This patch gives the following improvements during testing with iperf3: * RZ/G2L: * TCP RX: same bandwidth with -6% CPU load (76% -> 71%) * UDP RX: same bandwidth with -10% CPU load (99% -> 89%) * RZ/G2UL: * UDP RX: +4200% bandwidth (1.23Mbps -> 53Mbps) * RZ/G3S: * UDP RX: +425% bandwidth (1.23Mbps -> 6.46Mbps) The improvement of UDP RX bandwidth for the single core SoCs (RZ/G2UL & RZ/G3S) is particularly critical. Signed-off-by: -
Paul Barker authored
We can reduce code duplication in ravb_rx_gbeth(). Signed-off-by:
-
Paul Barker authored
To reduce code duplication, we add a new RX ring refill function which can handle both the initial RX ring population (which was split between ravb_ring_init() and ravb_ring_format()) and the RX ring refill after polling (in ravb_rx()). Signed-off-by:
-
Paul Barker authored
Align ravb_poll() with the documentation in `Documentation/networking/kapi.rst` and `Documentation/networking/napi.rst`. The documentation says that we should prefer napi_complete_done() over napi_complete(), and using the former allows us to properly support busy polling. We should ensure that napi_complete_done() is only called if the work budget has not been exhausted, and we should only re-arm interrupts if it returns true. Signed-off-by:
-
Paul Barker authored
We don't need to pass the work budget to ravb_rx() by reference, it's cleaner to pass this by value and return the amount of work done. This allows us to simplify the ravb_poll() function and use the common `work_done` variable name seen in other network drivers for consistency and ease of understanding. This is a pure refactor and should not affect behaviour. Signed-off-by:
-
Jakub Kicinski authored
Tariq Toukan says: ==================== net/mlx5e: SHAMPO, Enable HW GRO once more This series enables hardware GRO for ConnectX-7 and newer NICs. SHAMPO stands for Split Header And Merge Payload Offload. The first part of the series contains important fixes and improvements. The second part reworks the HW GRO counters. Lastly, HW GRO is perf optimized and enabled. Here are the bandwidth numbers for a simple iperf3 test over a single rq where the application and irq are pinned to the same CPU: +---------+--------+--------+-----------+-------------+ | streams | SW GRO | HW GRO | Unit | Improvement | +---------+--------+--------+-----------+-------------+ | 1 | 36 | 57 | Gbits/sec | 1.6 x | | 4 | 34 | 50 | Gbits/sec | 1.5 x | | 8 | 31 | 43 | Gbits/sec | 1.4 x | +---------+--------+--------+-----------+-------------+ Benchmark details: VM based setup CPU: Intel(R) Xeon(R) Platinum 8380 CPU, 24 cores NIC: ConnectX-7 100GbE iperf3 and irq running on same CPU over a single receive queue ==================== Link: https://lore.kernel.org/r/20240603212219.1037656-1-tariqt@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Dragos Tatulea authored
When doing hardware GRO (SHAMPO), the driver puts each data payload of a packet from the wire into one skb fragment. TCP Zero-Copy expects page sized skb fragments to be able to do it's page-flipping magic. With the current way of arranging fragments by the driver, only specific MTUs (page sized multiple + header size) will yield such page sized fragments in a high percentage. This change improves payload arrangement in the skb for hardware GRO by coalescing payloads into a single skb fragment when possible. To demonstrate the fix, running tcp_mmap with a MTU of 1500 yields: - Before: 0 % bytes mmap'ed - After : 81 % bytes mmap'ed More importantly, coalescing considerably improves the HW GRO performance. Here are the results for a iperf3 bandwidth benchmark: +---------+--------+--------+------------------------+-----------+ | streams | SW GRO | HW GRO | HW GRO with coalescing | Unit | |---------+--------+--------+------------------------+-----------| | 1 | 36 | 42 | 57 | Gbits/sec | | 4 | 34 | 39 | 50 | Gbits/sec | | 8 | 31 | 35 | 43 | Gbits/sec | +---------+--------+--------+------------------------+-----------+ Benchmark details: VM based setup CPU: Intel(R) Xeon(R) Platinum 8380 CPU, 24 cores NIC: ConnectX-7 100GbE iperf3 and irq running on same CPU over a single receive queue Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240603212219.1037656-15-tariqt@nvidia.comSigned-off-by:
-
Yoray Zack authored
Add back HW-GRO to the reported features. As the current implementation of HW-GRO uses KSMs with a specific fixed buffer size (256B) to map its headers buffer, we reported the feature only if the NIC is supporting KSM and the minimum value for buffer size is below the requested one. iperf3 bandwidth comparison: +---------+--------+--------+-----------+ | streams | SW GRO | HW GRO | Unit | |---------+--------+--------+-----------| | 1 | 36 | 42 | Gbits/sec | | 4 | 34 | 39 | Gbits/sec | | 8 | 31 | 35 | Gbits/sec | +---------+--------+--------+-----------+ A downstream patch will add skb fragment coalescing which will improve performance considerably. Benchmark details: VM based setup CPU: Intel(R) Xeon(R) Platinum 8380 CPU, 24 cores NIC: ConnectX-7 100GbE iperf3 and irq running on same CPU over a single receive queue Signed-off-by:
Yoray Zack <yorayz@nvidia.com> Signed-off-by:
-
Yoray Zack authored
KSM Mkey is KLM Mkey with a fixed buffer size. Due to this fact, it is a faster mechanism than KLM. SHAMPO feature used KLMs Mkeys for memory mappings of its headers buffer. As it used KLMs with the same buffer size for each entry, we can use KSMs instead. This commit changes the Mkeys that map the SHAMPO headers buffer from KLMs to KSMs. Signed-off-by:
-
Tariq Toukan authored
Count the number of header-only packets and bytes from SHAMPO. Signed-off-by:
-
Dragos Tatulea authored
After modifying rx_gro_packets to be more accurate, the rx_gro_match_packets counter is redundant. Signed-off-by:
-
Dragos Tatulea authored
Don't count non GRO packets. A non GRO packet is a packet with a GRO cb count of 1. Signed-off-by:
-
Yoray Zack authored
SHAMPO SKB can be flushed in mlx5e_shampo_complete_rx_cqe(). If the SKB was flushed, rq->hw_gro_data->skb was also set to NULL. We can skip on flushing the SKB in mlx5e_shampo_flush_skb if rq->hw_gro_data->skb == NULL. Signed-off-by:
-
Dragos Tatulea authored
mlx5e_fill_skb_data() used to have multiple callers. But after the XDP multibuf refactoring from commit 2cb0e27d ("net/mlx5e: RX, Prepare non-linear striding RQ for XDP multi-buffer support") the SHAMPO code path is the only caller. Take advantage of this and specialize the function: - Drop the redundant check. - Assume that data_bcnt is > 0. This is needed in a downstream patch. Rename the function as well to make things clear. Signed-off-by:
-
Dragos Tatulea authored
The function that releases SHAMPO header pages (mlx5e_shampo_dealloc_hd) has some complicated logic that comes from the fact that it is called twice during teardown: 1) To release the posted header pages that didn't get any completions. 2) To release all remaining header pages. This flow is not necessary: all header pages can be released from the driver side in one go. Furthermore, the above flow is buggy. Taking the 8 headers per page example: 1) Release fragments 5-7. Page will be released. 2) Release remaining fragments 0-4. The bits in the header will indicate that the page needs releasing. But this is incorrect: page was released in step 1. This patch releases all header pages in one go. This simplifies the header page cleanup function. For consistency, the datapath header page release API (mlx5e_free_rx_shampo_hd_entry()) is used. Signed-off-by:
-
Dragos Tatulea authored
When HW GRO is enabled, forwarding of packets is broken due to gso_size being set incorrectly on non GRO packets. Non GRO packets have a skb GRO count of 1. mlx5 always sets gso_size on the skb, even for non GRO packets. It leans on the fact that gso_size is normally reset in napi_gro_complete(). But this happens only for packets from GRO'able protocols (TCP/UDP) that have a gro_receive() handler. The problematic scenarios are: 1) Non GRO protocol packets are received, validate_xmit_skb() will drop them (see EPROTONOSUPPORT in skb_mac_gso_segment()). The fix for this case would be to not set gso_size at all for SHAMPO packets with header size 0. 2) Packets from a GRO'ed protocol (TCP) are received but immediately flushed because they are not GRO'able (TCP SYN for example). mlx5e_shampo_update_hdr(), which updates the remaining GRO state on the skb, is not called because skb GRO count is 1. The fix here would be to always call mlx5e_shampo_update_hdr(), regardless of skb GRO count. But this call is expensive The unified fix for both cases is to reset gso_size before calling napi_gro_receive(). It is a change that is more effective (no call to mlx5e_shampo_update_hdr() necessary) and simple (smallest code footprint). Signed-off-by:
-
Dragos Tatulea authored
For the following scenario: ethtool --features eth3 rx-gro-hw on ethtool --features eth3 rx-fcs on ethtool --features eth3 rx-fcs off ... there is a firmware error because the driver enables HW GRO first while FCS is still enabled. This patch fixes this by swapping the order of HW GRO and FCS for this specific case. Take LRO into consideration as well for consistency. Signed-off-by:
-
Dragos Tatulea authored
When all the strides in a WQE have been consumed, the WQE is unlinked from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible to receive CQEs with 0 consumed strides for the same WQE even after the WQE is fully consumed and unlinked. This triggers an additional unlink for the same wqe which corrupts the linked list. Fix this scenario by accepting 0 sized consumed strides without unlinking the WQE again. Signed-off-by:
-
Dragos Tatulea authored
Under the following conditions: 1) No skb created yet 2) header_size == 0 (no SHAMPO header) 3) header_index + 1 % MLX5E_SHAMPO_WQ_HEADER_PER_PAGE == 0 (this is the last page fragment of a SHAMPO header page) a new skb is formed with a page that is NOT a SHAMPO header page (it is a regular data page). Further down in the same function (mlx5e_handle_rx_cqe_mpwrq_shampo()), a SHAMPO header page from header_index is released. This is wrong and it leads to SHAMPO header pages being released more than once. Signed-off-by:
-
Tariq Toukan authored
Let the SHAMPO functions use the net-specific prefetch API, similar to all other usages. Signed-off-by:
-
Lukasz Majewski authored
Fixed MAC addresses help with debugging as last four bytes identify the network namespace. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20240603093322.3150030-1-lukma@denx.deSigned-off-by:
-
Lukasz Majewski authored
Fixed MAC addresses help with debugging as last four bytes identify the network namespace. Moreover, it allows to mimic the real life setup with for example bridge having the same MAC address on each port. Signed-off-by:
-
- 05 Jun, 2024 15 commits
-
-
Jakub Kicinski authored
Ronak Doshi says: ==================== vmxnet3: upgrade to version 9 vmxnet3 emulation has recently added timestamping feature which allows the hypervisor (ESXi) to calculate latency from guest virtual NIC driver to all the way up to the physical NIC. This patch series extends vmxnet3 driver to leverage these new feature. Compatibility is maintained using existing vmxnet3 versioning mechanism as follows: - new features added to vmxnet3 emulation are associated with new vmxnet3 version viz. vmxnet3 version 9. - emulation advertises all the versions it supports to the driver. - during initialization, vmxnet3 driver picks the highest version number supported by both the emulation and the driver and configures emulation to run at that version. In particular, following changes are introduced: Patch 1: This patch introduces utility macros for vmxnet3 version 9 comparison and updates Copyright information. Patch 2: This patch adds support to timestamp the packets so as to allow latency measurement in the ESXi. Patch 3: This patch adds support to disable certain offloads on the device based on the request specified by the user in the VM configuration. Patch 4: With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver, with this patch, the driver can configure emulation to run at vmxnet3 version 9. ==================== Link: https://lore.kernel.org/r/20240531193050.4132-1-ronak.doshi@broadcom.comSigned-off-by:
-
Ronak Doshi authored
With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver, the driver can configure emulation to run at vmxnet3 version 9, provided the emulation advertises support for version 9. Signed-off-by:
Ronak Doshi <ronak.doshi@broadcom.com> Acked-by:
Guolin Yang <guolin.yang@broadcom.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240531193050.4132-5-ronak.doshi@broadcom.comSigned-off-by:
-
Ronak Doshi authored
This patch adds a new command to disable certain offloads. This allows user to specify, using VM configuration, if certain offloads need to be disabled. Signed-off-by:
-
Ronak Doshi authored
This patch enhances vmxnet3 to support latency measurement. This support will help to track the latency in packet processing between guest virtual nic driver and host. For this purpose, we introduce a new timestamp ring in vmxnet3 which will be per Tx/Rx queue. This ring will be used to carry timestamp of the packets which will be used to calculate the latency. User can enable latency measurement using realtime knob in vnic setting in VCenter. Signed-off-by:
-
Ronak Doshi authored
vmxnet3 is currently at version 7 and this patch initiates the preparation to accommodate changes for up to version 9. Introduced utility macros for vmxnet3 version 9 comparison and update Copyright information. Signed-off-by:
-
David Christensen authored
Current ionic devices only support 52 internal physical address lines. This is sufficient for x86_64 systems which have similar limitations but does not apply to all other architectures, notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are not set outside the physical address limits of the NIC, set the no_64bit_msi value of the pci_dev structure during device probe. Signed-off-by:
David Christensen <drc@linux.ibm.com> Reviewed-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240603212747.1079134-1-drc@linux.ibm.comSigned-off-by:
-
Vadim Fedorenko authored
atomic_dec_if_positive returns new value regardless if it is updated or not. The commit in fixes changed the behavior of the condition to one that differs from original code. Restore original condition to properly maintain atomic counter. Fixes: 165f8769 ("bnxt_en: add timestamping statistics support") Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vadim Fedorenko <vadfed@meta.com> Reviewed-by:
-
David S. Miller authored
Kevin Yang says: ==================== tcp: add sysctl_tcp_rto_min_us Adding a sysctl knob to allow user to specify a default rto_min at socket init time. After this patch series, the rto_min will has multiple sources: route option has the highest precedence, followed by the TCP_BPF_RTO_MIN socket option, followed by this new tcp_rto_min_us sysctl. v3: fix typo, simplify min/max_t to min/max v2: fit line width to 80 column. v2: https://lore.kernel.org/netdev/20240530153436.2202800-1-yyd@google.com/ v1: https://lore.kernel.org/netdev/20240528171320.1332292-1-yyd@google.com/ ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Kevin Yang authored
Adding a sysctl knob to allow user to specify a default rto_min at socket init time, other than using the hard coded 200ms default rto_min. Note that the rto_min route option has the highest precedence for configuring this setting, followed by the TCP_BPF_RTO_MIN socket option, followed by the tcp_rto_min_us sysctl. Signed-off-by:
Kevin Yang <yyd@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
-
Kevin Yang authored
Rto_min now has multiple sources, ordered by preprecedence high to low: ip route option rto_min, icsk->icsk_rto_min. When derive delack_max from rto_min, we should not only use ip route option, but should use tcp_rto_min helper to get the correct rto_min. Signed-off-by:
-
Eric Dumazet authored
These fields can be read and written locklessly, add annotations around these minor races. Signed-off-by:
-
Anshumali Gaur authored
This patch adds support to dump NIX transmit queue topology. There are multiple levels of scheduling/shaping supported by NIX and a packet traverses through multiple levels before sending the packet out. At each level, there are set of scheduling/shaping rules applied to a packet flow. Each packet traverses through multiple levels SQ->SMQ->TL4->TL3->TL2->TL1 and these levels are mapped in a parent-child relationship. This patch dumps the debug information related to all TM Levels in the following way. Example: $ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_tree $ cat /sys/kernel/debug/octeontx2/nix/tm_tree A more desriptive set of registers at each level can be dumped in the following way. Example: $ echo <nixlf> > /sys/kernel/debug/octeontx2/nix/tm_topo $ cat /sys/kernel/debug/octeontx2/nix/tm_topo Signed-off-by:
Anshumali Gaur <agaur@marvell.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
-
David S. Miller authored
Christophe JAILLET says: ==================== devlink: Constify struct devlink_dpipe_table_ops Patch 1 updates devl_dpipe_table_register() and struct devlink_dpipe_table to accept "const struct devlink_dpipe_table_ops". Then patch 2 updates the only user of this function. This is compile tested only. ==================== Signed-off-by: -
Christophe JAILLET authored
'struct devlink_dpipe_table_ops' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 15557 712 0 16269 3f8d drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o After: ===== text data bss dec hex filename 15789 488 0 16277 3f95 drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Christophe JAILLET authored
"struct devlink_dpipe_table_ops" only contains some function pointers. Update "struct devlink_dpipe_table" and the 'table_ops' parameter of devl_dpipe_table_register() so that structures in drivers can be constified. Constifying these structures will move some data to a read-only section, so increase overall security. Signed-off-by:
-
