- 05 Aug, 2021 4 commits
-
-
Dillon Min authored
This driver combines tiny/ili9341.c mipi_dbi_interface driver with mipi_dpi_interface driver, can support ili9341 with serial mode and parallel rgb interface mode by different dts bindings. Signed-off-by:
Dillon Min <dillon.minfei@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Dillon Min authored
Add documentation for "ilitek,ili9341" panel. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/lkml/1626853288-31223-2-git-send-email-dillon.minfei@gmail.com/Signed-off-by:
-
Artjom Vejsel authored
The Gopher 2b LCD panel is used in Gopher 2b handhelds. It's simple panel with NewVision NV3047 driver, but SPI lines are not connected. It has no specific name, since it's unique to that handheld. lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG NV3047 Drive IC 480(RGB)*272 No Touch 24Bit RGB Interface Signed-off-by:
Artjom Vejsel <akawolf0@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210804002353.76385-4-akawolf0@gmail.com
-
Artjom Vejsel authored
Add DT bindings for QiShenglong Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel. Signed-off-by:
-
- 02 Aug, 2021 9 commits
-
-
Thomas Zimmermann authored
Abstract the framebuffer details by mappings its BOs with a call to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunamp(). Before, the output address with stored as raw pointer in the priv field of struct drm_writeback_job. Introduce the new type struct vkms_writeback_job, which holds the output mappings addresses while the writeback job is active. The patchset also cleans up some internal casting an setup of the output addresses. No functional changes. v3: * free instances of struct vkms_writeback_job on cleanup or errors Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210730183511.20080-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Abstract the framebuffer details by mapping its BOs with a call to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunmap(). The call to drm_gem_fb_vmap() ensures that all BOs are mapped correctly. Gud still only supports single-plane formats. No functional changes. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
-
Thomas Zimmermann authored
Set the returned mapping address to NULL if a framebuffer plane does not have a BO associated with it. Likewise, ignore mappings of NULL during framebuffer unmap operations. Allows users of the functions to perform unmap operations of certain BOs by themselfes. Signed-off-by:
-
Thomas Zimmermann authored
Move framebuffer vmap code from shadow-buffered plane state into the new interfaces drm_gem_fb_vmap() and drm_gem_fb_vunmap(). These functions provide mappings of a framebuffer's BOs into kernel address space. No functional changes. v4: * remove duplicated blank line v2: * using [static N] for array parameters enables compile-time checks * include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES (kernel test robot) Signed-off-by:
-
Thomas Zimmermann authored
DRM uses a magic number of 4 for the maximum number of planes per color format. Declare this constant via DRM_FORMAT_MAX_PLANES and update the related code. Some code depends on the length of arrays that are now declared with DRM_FORMAT_MAX_PLANES. Convert it from '4' to ARRAY_SIZE. v2: * mention usage of ARRAY_SIZE() in the commit message (Maxime) * also fix error handling in drm_gem_fb_init_with_funcs() (kernel test robot) * include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES Signed-off-by:
-
Simon Ser authored
It's not obvious what the fields mean and how they should be used. The most important detail is the link to drm_property.flags, which describes how property types work. v2: document enum drm_mode_property_enum, add ref to "Modeset Base Object Abstraction" (Daniel) Signed-off-by:
Simon Ser <contact@emersion.fr> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Leandro Ribeiro <leandro.ribeiro@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210802072826.500078-1-contact@emersion.fr
-
Daniel Vetter authored
I've added a new check to make sure that drivers which insepct the damage property have it set up correctly, but somehow missed that this borke the damage selftest in the CI result noise. Fix it up by mocking enough of drm_device and drm_plane so we can call drm_plane_enable_fb_damage_clips() to make the new check happy. Since there's a lot of duplicated mock code already copy-pasted into each test I've also refactored this a bit to trim it down. v2: Squash in fixup from 0day for drivers/gpu/drm/selftests/test-drm_damage_helper.c:15:19: warning: symbol 'mock_device' was not declared. Should it be static? drivers/gpu/drm/selftests/test-drm_damage_helper.c:16:30: warning: symbol 'mock_obj_props' was not declared. Should it be static? drivers/gpu/drm/selftests/test-drm_damage_helper.c:17:18: warning: symbol 'mock_plane' was not declared. Should it be static? drivers/gpu/drm/selftests/test-drm_damage_helper.c:18:21: warning: symbol 'mock_prop' was not declared. Should it be static? Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Fixes: c7fcbf25 ("drm/plane: check that fb_damage is set up when used") Cc: José Roberto de Souza <jose.souza@intel.com> (v1) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210730095251.4343-1-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20210730141948.GA11955@243d74413310
-
Cai Huoqing authored
fix typo for drm v1->v2: respin with the change "iff ==> implies that" Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Simon Ser authored
Mention that connectors need to be referenced manually if they are to be accessed after the iteration has progressed or ended. Signed-off-by:
-
- 01 Aug, 2021 2 commits
-
-
Gregory Williams authored
Removed space before comma, fixed if statements by putting trailing statements on new line, fixed unsigned int declaration, and removed not needed else statement after return. Signed-off-by:
Gregory Williams <gregwills85@gmail.com> Signed-off-by:
-
Alistair Francis authored
Add support for the 10.3" E Ink panel described at: https://www.eink.com/product.html?type=productdetail&id=7Signed-off-by:
Alistair Francis <alistair@alistair23.me> Acked-by:
-
- 31 Jul, 2021 7 commits
-
-
Cai Huoqing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Douglas Anderson authored
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight control over the DP AUX channel. This panel is _almost_ able to be controlled in a "simple" way (and it originally was implemented in panel-simple.c), but it's really impossible to get the backlight semantics right there without adding wacky special-case code to panel-simple. Let's give up and clone the parts of panel-simple that we need and implement the power sequence that this panel needs. NOTE: we'll still leave the devicetree bindings alone. Even though the power-sequencing is non-standard the bindings are still "simple". Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit 18a1488b. Those delays were added to support the Samsung ATNA33XC20 panel. However, we've moving that to its own panel driver and out of panel-simple. That means we don't need the ability to specify this delay. NOTE: it's unlikely we want to keep this delay "just in case" some other panel needs it. The enable-gpio and the power supply are really supposed to be different ways to specify the same thing: the main enable of the panel. Supporting a delay between them doesn't really make sense. Signed-off-by:
-
Douglas Anderson authored
This reverts commit 4bfe6c8f. This panel's power sequencing really can't be handled properly by panel-simple because of the special sequencing needed for the EL_ON3 GPIO. The only way it was sorta working in the past was by trying to jam that signal into the "enable-gpio", but that really wasn't a good fit. We'll add a custom panel driver for this panel to do it right. Signed-off-by:
-
Douglas Anderson authored
The manual has always said that we need 100 us delays in a few places. Though it hasn't seemed to be a big deal to skip these, let's add them in case it makes something happier. NOTE: this fixes no known issues but it seems good to make it right. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
-
Douglas Anderson authored
When testing with a panel that's apparently a little more persnickety about the correct power sequence (specifically Samsung ATNA33XC20), we found that the ti-sn65dsi86 was doing things just slightly wrong. Looking closely at the ti-sn65dsi86's datasheet, the power off sequence is supposed to be: 1. Clear VSTREAM_ENABLE bit 2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state. 3. Program the ML_TX_MODE to 0x0 (OFF) 4. Program the DP_NUM_LANES register to 0x0 5. Clear the DP_PLL_EN bit. 6. Deassert the EN pin. 7. Remove power from supply pins Since we were doing the whole sequence in the "disable", I believe that step #2 (stopping the DSI stream from the GPU) wasn't happening. We also weren't setting DP_NUM_LANES to 0. Let's fix this. NOTE: things are a little asymmetric now. For instance, we turn the PLL on in "enable" but now we're not turning it off until "post_disable". It would seem to make sense to move the PLL turning on to "pre_enable" to match. Unfortunately, I don't believe that's allowed. It looks as if (in the non-refclk mode which probably nobody is using) we have to wait until the MIPI clock is there before we can enable the PLL. In any case, the way it is here won't really hurt--it'll just leave the PLL on a little longer. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by:
-
Douglas Anderson authored
The function drm_edp_backlight_init() is defined such that the "driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want to futz with it. If you follow this variable through, you'll find out that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving it as 0. That means that before using it in drm_edp_backlight_enable() we need to check to see if it's non-zero. Programming this field to zero was confusing the panel I tested with (Samsung ATNA33XC20). The backlight still worked somewhat but the brightness values didn't correspond to what they should have been. Fixes: 867cf9cd ("drm/dp: Extract i915's eDP backlight code into DRM helpers") Signed-off-by:
-
- 30 Jul, 2021 5 commits
-
-
Desmond Cheong Zhi Xi authored
The kerneldoc in drm_lease.c is unused because none of the functions are driver interfaces as the symbols are not exported. Since they aren't used and much of the existing comments don't provide any insights (e.g. they just repeat the function name or list out the function parameters), they should be removed to make them easier to maintain and to make useful info more obvious. As a note, many of the comments mention whether idr_mutex should be held, but these are mostly redundant in cases where the function contains lockdep assertions or grabs the mutex. To simplify review, here's the reasoning behind each update. drm_lease_owner: function name is self-descriptive _drm_find_lessee: function name is self-descriptive _drm_lease_held_master: function name and signature are self-descriptive _drm_has_leased: kerneldoc is summarized into a comment because the function name could be interpreted ambiguously (check if the object has been leased VS check if the master has a lease on the object) _drm_lease_held: Retain the idr_mutex comment because the function does not directly grab the mutex or use a lockdep assertion. Otherwise, the function name is self-descriptive. drm_lease_held: function name is self-descriptive drm_lease_filter_crtcs: Kerneldoc is summarized into a comment because the function name could be interpreted ambiguously (filter leases based on crtcs mask VS filter crtcs mask based on leases) drm_lease_create: Kerneldoc removed. Useful function details such as atomic leasing are retained. Errno interpretations are useful and retained. drm_lease_destroy: function name is self-descriptive. Additional information is also removed as they're already present as comments inside the function. _drm_lease_revoke: function name is self-descriptive drm_lease_revoke: function name is self-descriptive drm_mode_create_lease_ioctl: Kerneldoc removed, but useful function details retained. drm_mode_list_lessees_ioctl: function name is self-descriptive. Additional details restate what the code does. drm_mode_get_lease_ioctl: Function summary retained to clarify that it's the leased objects that are returned, not the lease structure. drm_mode_revoke_lease_ioctl: Kerneldoc removed, but useful function details retained. Signed-off-by:
Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
An early pull for v5.15 (there'll be more coming in a week or two), consisting of the drm/scheduler conversion and a couple other small series that one was based one. Mostly sending this now because IIUC danvet wanted it in drm-next so he could rebase on it. (Daniel, if you disagree then speak up, and I'll instead include this in the main pull request once that is ready.) This also has a core patch to drop drm_gem_object_put_locked() now that the last use of it is removed. [airlied: add NULL to drm_sched_init] Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car DU shutdown fixes - R-Car DU conversion to bridge connector helper - Misc small fixes Signed-off-by:
-
- 29 Jul, 2021 12 commits
-
-
Maxime Ripard authored
Commit 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") removed the references to the vc4_hdmi_audio_component_drv structure, but not the structure itself resulting in a warning. Remove it. Fixes: 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") Reported-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
-
Maxime Ripard authored
The vc4_hdmi_audio_prepare function and the functions it's calling have in several occurences multiple dereferences of either the sample rate or the number of channels. It turns out that these variables are also passed through the hdmi codec parameters structure. Convert all the users to use this structure, and if it's used multiple times use a variable to store it instead of dereferencing it every time. Reviewed-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by:
-
Desmond Cheong Zhi Xi authored
We make the following changes to the documentation of drm leases to make it easier to reason about their usage. In particular, we clarify the lifetime and locking rules of lease fields in drm_master: 1. Make it clear that &drm_device.mode_config.idr_mutex protects the lease idr and list structures for drm_master. The lessor field itself doesn't need to be protected as it doesn't change after it's set in drm_lease_create. 2. Add descriptions for the lifetime of lessors and leases. 3. Add an overview DOC: section in drm-uapi.rst that defines the terminology for drm leasing, and explains how leases work and why they're used. Signed-off-by:
-
Luben Tuikov authored
Fix a bug in smu_cmn_send_msg_without_waiting() in that this function does not need to take the smu->message_lock mutex in order to send a message down to the SMU. The mutex is acquired by the caller of this function instead. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Changfeng Zhu <Changfeng.Zhu@amd.com> Cc: Huang Rui <ray.huang@amd.com> Fixes: 5810323b ("drm/amd/pm: Fix a bug communicating with the SMU (v5)") Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
Huang Rui authored
The function is ready on psp firmware, and enable it by default. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Likun Gao authored
Fence driver was enabled per ring when sw init on per IP block before. Change to enable all the fence driver at the same time after amdgpu_device_ip_init finished. Rename some function related to fence to make it reasonable for read. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
John Clements authored
Added BL loading support for soc/intf/dbg drivers Signed-off-by:
John Clements <john.clements@amd.com> Reviewed-by:
-
John Clements authored
Remove duplicate code Signed-off-by:
-
John Clements authored
Detect psp driver binaries packed into FW and try to load the FW Signed-off-by:
-
John Clements authored
Improved handling for scalling PSP FW binaries Signed-off-by:
-
Huang Rui authored
It won't need to clear the xxx_PSP_DEBUG registers, because firmware will handle this change. Signed-off-by:
-
Alex Deucher authored
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
- 28 Jul, 2021 1 commit
-
-
Linus Walleij authored
This converts the internal backlight in the Sony ACX424AKP driver to do it the canonical way: - Assign the panel->backlight during probe. - Let the panel framework handle the backlight. - Make the backlight .set_brightness() turn the backlight off completely if blank. - Fix some dev_err_probe() use cases along the way. Tested on the U8500 HREF520 reference design. Signed-off-by:
-
