- 26 Sep, 2017 7 commits
-
-
Tvrtko Ursulin authored
This will allow some code re-organization in a following patch. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170920092701.17963-2-tvrtko.ursulin@linux.intel.com
-
Chris Wilson authored
If we see the seqno stop progressing, we abandon the test for fear that the GPU died following the reset. However, during test teardown we still wait for the GPU to idle before continuing, but we have already confirmed that the GPU is dead. Furthermore, since we are inside a reset test, we have disabled the hangchecker, and so there is no safety net and we wait indefinitely. Detect the stuck GPU and declare it wedged as a state of emergency so we can escape. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jari Tahvanainen <jari.tahvanainen@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170915130929.18892-1-chris@chris-wilson.co.ukTested-by:
Jari Tahvanainen <jari.tahvanainen@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Sagar Arun Kamble authored
Prepared intel_auth_huc to separate HuC specific functionality from GuC send action. Created new header intel_huc.h to group HuC specific declarations. v2: Changed argument preparation for AUTHENTICATE_HUC. s/intel_auth_huc/intel_huc_auth. Deferred creation of intel_huc.h to later patch. v3: Rebase as intel_guc.h is removed. Added param description to intel_huc_auth. (Michal) v4: Rebase as intel_guc.h is added again. :) v5: Rebase w.r.t removal of GuC code restructuring. v6-v7: Rebase. v8: Tagged subject as drm/i915/huc. (Michal Wajdeczko) Added kernel-doc description to intel_huc_auth and intel_guc_auth_huc. s/dev_priv/i915 and removed unnecessary variable offset. (Joonas) v9: Rebase. Had conflict with i915_modparams change. Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Members should be initialized with values of matching types. Signed-off-by:
-
Michal Wajdeczko authored
By combining default value into helper macro we can initialize modparams struct in the same automatic way as it was declared. This will initialize members in the same order as declared and additionally will disallow declaring new member without proper default value for it. v2: make MEMBER macro more robust (Joonas) Signed-off-by:
-
Michal Wajdeczko authored
We should not add trailing ; after each member to allow other than statements-style uses of this helper macro. While here s/func/param for clarity. Signed-off-by:
-
Uma Shankar authored
For certain platforms on certain encoders, timings are driven from port instead of pipe. Thus, we can't rely on pipe scanline registers to get the timing information. Some cases scanline register read will not be functional. This is causing vblank evasion logic to fail since it relies on scanline, causing atomic update failure warnings. This patch uses pipe framestamp and current timestamp registers to calculate scanline. This is an indirect way to get the scanline. It helps resolve atomic update failure for gen9 dsi platforms. v2: Addressed Ville and Daniel's review comments. Updated the register MACROs, handled race condition for register reads, extracted timings from the hwmode. Removed the dependency on crtc->config to get the encoder type. v3: Made get scanline function generic v4: Addressed Ville's review comments. Added a flag to decide timestamp based scanline reporting. Changed 64bit variables to u32 v5: Adressed Ville's review comments. Put the scanline compute function at the place of caller. Removed hwmode flags from uapi and used a local i915 data structure instead. v6: Used vblank hwmode to get the timings. v7: Fixed sparse warnings, indentation and minor review comments. v8: Limited this only for Gen9 DSI. Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 25 Sep, 2017 15 commits
-
-
Chris Wilson authored
Just rearrange the code slightly to trim the number of iterations required. Signed-off-by:
-
Ville Syrjälä authored
i830 seems to occasionally forget the PIPESTAT enable bits when we read the register. These aren't the only registers on i830 that have problems with RMW, as reading the double buffered plane registers returns the latched value rather than the last written value. So something similar is perhaps going on with PIPESTAT. This corruption results on vblank interrupts occasionally turning off on their own, which leads to vblank timeouts and generally a stuck display subsystem. So let's not RMW the pipestat enable bits, and instead use the cached copy we have around. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
David Weinehall authored
Currently we're doing: 1. acquire lock 2. write word to hardware 3. release lock 4. repeat from 1 to load the DMC firmware. Due to the cost of acquiring/releasing a lock, and the size of the DMC firmware, this slows down DMC loading a lot. This patch simply acquires the lock, writes the entire firmware, then releases the lock. Testing shows resume speedups in the order of 10ms on platforms with DMC firmware (GEN9+). v2: Per feedback from Chris & Ville there's no need to do the whole forcewake dance, so lose that bit (Chris, Ville) v3: Actually send the new version of the patch... v4: Don't acquire the uncore lock. Disable preempt. (Chris) Signed-off-by:David Weinehall <david.weinehall@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170905131050.11655-1-david.weinehall@linux.intel.comReviewed-by:
-
Dhinakaran Pandiyan authored
We already print training pattern used during link training and also print if the source or sink does not support TPS3 for HBR2 link rates, see intel_dp_training_pattern(). Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Pandiyan, Dhinakaran authored
The buffer size defined is 16 bytes whereas only 14 bytes are read. Add a macro to avoid this discrepancy. Signed-off-by:
James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Pandiyan, Dhinakaran authored
Both mst_disable_dp and mst_post_disable_dp print number of active links before the variable has been updated. Move the print statement in mst_disable_dp after the decrement so that the printed values indicate the disabing of a mst connector. Also, add some text to clarify what we are printing. Signed-off-by:
-
Pandiyan, Dhinakaran authored
Print connector name in destroy_connect() and this doesn't add any extra lines to dmesg. The debug macro has been moved before the unregister call so that we don't lose the connector name and id. Signed-off-by:
-
Chris Wilson authored
Since we inherited the context image setup from gen8 which needed a per-bb workaround (for GPGPU), we are submitting an empty per-bb buffer on gen9. Now that we can skip adding the buffer to the context image, remove the dangling per-bb. This slightly improves execution latency, most notably on an idle engine. References: https://bugs.freedesktop.org/show_bug.cgi?id=87725Signed-off-by:
-
Chris Wilson authored
The per-context and per-batch workaround buffers are optional, yet we tell the GPU to execute them even if they contain no instructions. Doing so incurs the dispatch latency, which we can avoid if we don't ask the GPU to execute the no-op buffers. Allow ourselves to skip setup of empty buffer, and then to only enable non-empty buffers in the context image. Signed-off-by:
-
Mika Kuoppala authored
As we emulate execlists on top of the GuC workqueue, it is not restricted to just 2 ports and we can increase that number arbitrarily to trade-off queue depth (i.e. scheduling latency) against pipeline bubbles. v2: rebase. better commit msg (Chris) v3: rebase Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Mika Kuoppala authored
When first execlist entry is processed, we move the port (contents). Introduce function for this as execlist and guc use this common operation. v2: rebase. s/GEM_DEBUG_BUG/GEM_BUG (Chris) v3: rebase Signed-off-by:
-
Mika Kuoppala authored
On reset and wedged path, we want to release the requests that are tied to ports and then mark the ports to be unset. Introduce a function for this. v2: rebase v3: drop local, keep GEM_BUG_ON (Michał, Chris) v4: rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
-
Mika Kuoppala authored
Move execlist init into a common engine setup. As it is common to both guc and hw execlists. v2: rebase with csb changes v3: rebase Signed-off-by:
-
Mika Kuoppala authored
Engine's execlist related items have been increasing to a point where a separate struct is warranted. Carve execlist specific items to a dedicated struct to add clarity. v2: add kerneldoc and fix whitespace (Joonas, Chris) v3: csb_mmio changes, rebase v4: s/\b(el|execlist)\b/execlists/ (Joonas) Suggested-by:
-
Jani Nikula authored
The hardware state readout oopses after several warnings when trying to use HDMI on port A, if such a combination is configured in VBT. Filter the combo out already at the VBT parsing phase. v2: also ignore DVI (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889 Cc: stable@vger.kernel.org Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Daniel Drake <dan@reactivated.net> Signed-off-by:
-
- 22 Sep, 2017 6 commits
-
-
Chris Wilson authored
No users now outside of i915_wait_request(), so we can make it private to i915_gem_request.c, and assume the caller knows the seqno. In the process, also remove i915_gem_request_started() as that was only ever used by i915_spin_request(). Signed-off-by:
-
Oscar Mateo authored
The total size of the context has decreased with the removal of the URB_ATOMIC section. BSpec indicates 16750 DWORDs (17 pages), plus one page for PPHWSP, and I'm throwing an extra page for precaution. Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Ben Widawsky <ben@bwidawsk.net> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Our global struct with params is named exactly the same way as new preferred name for the drm_i915_private function parameter. To avoid such name reuse lets use different name for the global. v5: pure rename v6: fix Credits-to: Coccinelle @@ identifier n; @@ ( - i915.n + i915_modparams.n ) Signed-off-by:
-
Chris Wilson authored
After we see our target seqno has been completed by the hw, we need to confirm that it still matches the request (as it may have been preempted before the spin completes). If the request no longer matches the target seqno, we need to restart the wait to reacquire that seqno. Signed-off-by:
-
Chris Wilson authored
If preemption occurs at precisely the right moment, we may decide that the wait is complete even though the wait's request is no longer executing (having been preempted). We handle this situation by double checking that request following deciding whether the wait is complete. Reported-by:
-
Chris Wilson authored
As we now check if the seqno is complete in order to signal the fence, we can also decide not to wake up the first_waiter until it is ready (since it is waiting on the same seqno). The only caveat is that if we need the engine->irq_seqno_barrier to enforce some coherency between an interrupt and the seqno read, we have to always wake the waiter in order to perform that heavyweight barrier. Signed-off-by:
-
- 21 Sep, 2017 2 commits
-
-
Chris Wilson authored
Since we reuse the same field for the user passing in their control flags, and for the kernel to track a couple of bits of state, document and check that those do not overlap. Suggested-by:
-
Anuj Phogat authored
See Mesa commit 9c588ff Cc: Matt Turner <mattst88@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anuj Phogat <anuj.phogat@gmail.com> Reviewed-by:
-
- 20 Sep, 2017 5 commits
-
-
Colin Ian King authored
hw_check is being assigned and updated but is no longer being read, hence it is redundant and can be removed. Detected by clang scan-build: "warning: Value stored to 'hw_check' during its initialization is never read" Fixes: f6d1973d ("drm/i915: Move modeset state verifier calls") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914162154.11304-1-colin.king@canonical.com
-
Ville Syrjälä authored
Most of our DP encoder hooks are split into per-platform variants. .disable() an exception, and thus it's a bit messy. Let's split it up as well. We'll leave the common parts in a helper called by each platform specific hook. Now each platform has mostly its own hooks. Some hooks are still shared between vlv and chv, and between g4x and ilk. None of the remaining shared hooks have any platform checks in them however so duplicating them doesn't seem particularly useful. There is a subtle change on VLV/CHV where we now disable PSR before audio, whereas before we disabled PSR after audio. That should be totally fine, and PSR is disabled by default anyway. Jani also pointed out to me that PSR + audio doesn't seem like a particularly realistic combination. v2: Drop the PSR HAS_DDI check here (Rodrigo) Pimp up the commit message a bit based on a chat with Jani Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: -
Ville Syrjälä authored
It is safe to call intel_psr_disable() on a platform without PSR. We don't have such a check when calling intel_psr_enable() either. v2: Don't drop the HAS_DDI check quite yet (Rodrigo) Reviewed-by:
-
Mika Kuoppala authored
On kbl evidence indicates that even if the hardware happily tells us to proceed with reset, it really isn't ready. Resetting a freely running batchbuffer after we have ack for readiness, still can cause a system hang. We also have similar experiences on older gens. So now attempt to stop engines before proceeding for reset, on all gens where we have a gpu reset. This has shown to improve reset reliability and reduce the risk of losing the machine. v2: Add fixme for wa (Joonas) Testcase: igt/prime_busy/hang-* # kbl Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
drm_edid_to_eld() initializes the connector ELD to zero, overwriting the ELD connector type initialized in intel_audio_codec_enable(). If userspace does getconnector and thus get_modes after modeset, a subsequent audio component i915_audio_component_get_eld() call will receive an ELD without the connector type properly set. It's fine for HDMI, but screws up audio for DP. Always set the ELD connector type at intel_connector_update_modes() based on the connector type. We can drop the connector type update from intel_audio_codec_enable(). Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joseph Nuzman <jnuzman@gmail.com> Reported-by:
Joseph Nuzman <jnuzman@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583Reviewed-by:
-
- 19 Sep, 2017 5 commits
-
-
Rodrigo Vivi authored
We now have Coffee Lake on our CI systems. Coffee Lake is at this point in same stage as Kaby Lake. And it seems that we don't have any risk of bad blank screens or anything like that. So let's remove the protection. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
"CNL PCH chance of hang when software accesses south display registers after hotplug is enabled. Workaround: Program 0xC2000 bits 11:8 = 0xF before enabling south display hotplug detection." "Workaround only needs to be applied to pre-production steppings used in graphics capable SKUs, but it is easier to apply to everything, and does not hurt." v2: Moving from clock gating to right before enabling SHOTPLUG_CTL as it should be. v3: Align with SOUTH_CHICKEN1 (DK) and consequently use proper spaces on bits definition since other bits around already use new style. And now that checkpatch is not noise anymore I also fixed the reg read mask to avoid going over 80 chars. Suggested-by:Ben Widawsky <ben@bwidawsk.net> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Ville Syrjälä authored
All the values we put into the CNL buf_trans tables fit into 8 bits. So switch over to u8 from the u32 we use currently. Signed-off-by:
-
Ville Syrjälä authored
All the values we put into the BXT buf_trans tables fit into 8 bits. So switch over to u8 from the u32 we use currently. Signed-off-by:
-
Ville Syrjälä authored
Some comments in intel_ddi.c are indented with spaces instead of tabs. Fix that up. Signed-off-by:
-
