* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix memory leaks in pcc_cpufreq_do_osc
  [CPUFREQ] acpi-cpufreq: add missing __percpu markup

* 'merge-spi' of git://git.secretlab.ca/git/linux-2.6:
  of/spi: Fix OF-style driver binding of spi devices
  spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TX
  spi/mpc8xxx: fix buffer overrun on large transfers

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  vlan: dont drop packets from unknown vlans in promiscuous mode
  Phonet: Correct header retrieval after pskb_may_pull
  um: Proper Fix for f25c80a4: remove duplicate structure field initialization
  ip_gre: Fix dependencies wrt. ipv6.
  net-2.6: SYN retransmits: Add new parameter to retransmits_timed_out()
  iwl3945: queue the right work if the scan needs to be aborted
  mac80211: fix use-after-free

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow
  drm/i915: Sanity check pread/pwrite
  drm/i915: Use pipe state to tell when pipe is off
  drm/i915: vblank status not valid while training display port
  drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code
  drm/i915: Fix refleak during eviction.
  drm/i915: fix GMCH power reporting

Building under memory pressure, with KSM on 2.6.36-rc5, collapsed with
an internal compiler error: typically indicating an error in swapping.

Perhaps there's a timing issue which makes it now more likely, perhaps
it's just a long time since I tried for so long: this bug goes back to
KSM swapping in 2.6.33.

Notice how reuse_swap_page() allows an exclusive page to be reused, but
only does SetPageDirty if it can delete it from swap cache right then -
if it's currently under Writeback, it has to be left in cache and we
don't SetPageDirty, but the page can be reused.  Fine, the dirty bit
will get set in the pte; but notice how zap_pte_range() does not bother
to transfer pte_dirty to page_dirty when unmapping a PageAnon.

If KSM chooses to share such a page, it will look like a clean copy of
swapcache, and not be written out to swap when its memory is needed;
then stale data read back from swap when it's needed again.

We could fix this in reuse_swap_page() (or even refuse to reuse a
page under writeback), but it's more honest to fix my oversight in
KSM's write_protect_page().  Several days of testing on three machines
confirms that this fixes the issue they showed.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2.6.36-rc1 commit 21d0d443 "rmap:
resurrect page_address_in_vma anon_vma check" was right to resurrect
that check; but now that it's comparing anon_vma->roots instead of
just anon_vmas, there's a danger of oopsing on a NULL anon_vma.

In most cases no NULL anon_vma ever gets here; but it turns out that
occasionally KSM, when enabled on a forked or forking process, will
itself call page_address_in_vma() on a "half-KSM" page left over from
an earlier failed attempt to merge - whose page_anon_vma() is NULL.

It's my bug that those should be getting here at all: I thought they
were already dealt with, this oops proves me wrong, I'll fix it in
the next release - such pages are effectively pinned until their
process exits, since rmap cannot find their ptes (though swapoff can).

For now just work around it by making page_address_in_vma() safe (and
add a comment on why that check is wanted anyway).  A similar check
in __page_check_anon_rmap() is safe because do_page_add_anon_rmap()
already excluded KSM pages.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... and do the same for pread.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Move the access control up from the fast paths, which are no longer
universally taken first, up into the caller. This then duplicates some
sanity checking along the slow paths, but is much simpler.
Tracked as CVE-2010-2962.
Reported-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Instead of waiting for the display line value to settle, we can simply
wait for the pipe configuration register 'state' bit to turn off.

Contrarywise, disabling the plane will not cause the display line
value to stop changing, so instead we wait for the vblank interrupt
bit to get set. And, we only do this when we're not about to wait for
the pipe to turn off.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

While the display port is in training mode, vblank interrupts don't
occur. Because we have to wait for the display port output to turn on
before starting the training sequence, enable the output in 'normal'
mode so that we can tell when a vblank has occurred, then start the
training sequence.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This patch adds the OF hook to the spi core so that devices
can automatically be registered based on device tree data.  This fixes
a problem with spi devices not binding to drivers after the cleanup of
the spi & i2c binding code.
Signed-off-by: Sinan Akman <sinan@writeme.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

The SPI_MASTER_NO_TX bit (can't do buffer write) wasn't tested.  This
code was introduced in commit 3c8e1a84 (spi/spi-gpio: add support for
controllers without MISO or MOSI pin).  This patch fixes a bug in
choosing which transfer ops to use.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Extend the error handling code with operations found in other nearby error
handling code

A simplified version of the sematic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
@r@
statement S1,S2,S3;
constant C1,C2,C3;
@@

*if (...)
 {... S1 return -C1;}
...
*if (...)
 {... when != S1
    return -C2;}
...
*if (...)
 {... S1 return -C3;}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: prevent infinite recursion in cifs_reconnect_tcon
  cifs: set backing_dev_info on new S_ISREG inodes

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hpet: Fix bogus error check in hpet_assign_irq()
  x86, irq: Plug memory leak in sparse irq
  x86, cpu: After uncapping CPUID, re-run CPU feature detection

flush_icache_range() is given virtual addresses to describe the region.  It
deals with these by attempting to translate them through the current set of
page tables.

This is fine for userspace memory and vmalloc()'d areas as they are governed by
page tables.  However, since the regions above 0x80000000 aren't translated
through the page tables by the MMU, the kernel doesn't bother to set up page
tables for them (see paging_init()).

This means flush_icache_range() as it stands cannot be used to flush regions of
the VM area between 0x80000000 and 0x9fffffff where the kernel resides if the
data cache is operating in WriteBack mode.

To fix this, make flush_icache_range() first check for addresses in the upper
half of VM space and deal with them appropriately, before dealing with any
range in the page table mapped area.

Ordinarily, this is not a problem, but it has the capacity to make kprobes and
kgdb malfunction.  It should not affect gdbstub, signal frame setup or module
loading as gdb has its own flush functions, and the others take place in the
page table mapped area only.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  vmwgfx: Fix fb VRAM pinning failure due to fragmentation
  vmwgfx: Remove initialisation of dev::devname
  vmwgfx: Enable use of the vblank system
  vmwgfx: vt-switch (master drop) fixes
  drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)"
  drm: Hold the mutex when dropping the last GEM reference (v2)
  drm/gem: handlecount isn't really a kref so don't make it one.
  drm: i810/i830: fix locked ioctl variant
  drm/radeon/kms: add quirk for MSI K9A2GM motherboard
  drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idle
  drm: Prune GEM vma entries
  drm/radeon/kms: fix up encoder info messages for DFP6
  drm/radeon: fix PCI ID 5657 to be an RV410

* 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux:
  i2c-s3c2410: fix calculation of SDA line delay
  i2c-davinci: Fix race when setting up for TX
  i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeout

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: invoke DSDT corruption workaround on all Toshiba Satellite
  ACPI, APEI, Fix ERST MOVE_DATA instruction implementation
  ACPI: fan: Fix more unbalanced code block
  ACPI: acpi_pad: simplify code to avoid false gcc build warning
  ACPI, APEI, Fix error path for memory allocation
  ACPI, APEI, HEST Fix the unsuitable usage of platform_data
  ACPI, APEI, Fix acpi_pre_map() return value
  ACPI, APEI, Fix APEI related table size checking
  ACPI: Disable Windows Vista compatibility for Toshiba P305D
  ACPI: Kconfig: fix typo.
  ACPI: add missing __percpu markup in arch/x86/kernel/acpi/cstate.c
  ACPI: Fix typos
  ACPI video: fix a poor warning message
  ACPI: fix build warnings resulting from merge window conflict
  ACPI: EC: add Vista incompatibility DMI entry for Toshiba Satellite L355
  ACPI: expand Vista blacklist to include SP1 and SP2
  ACPI: delete ZEPTO idle=nomwait DMI quirk
  ACPI: enable repeated PCIEXP wakeup by clearing PCIEXP_WAKE_STS on resume
  PM / ACPI: Blacklist systems known to require acpi_sleep=nonvs
  ACPI: Don't report current_now if battery reports in mWh

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: Voluntary leave_mm before entering deeper
  acpi_idle: add missing \n to printk
  intel_idle: add missing __percpu markup
  intel_idle: Change mode 755 => 644
  cpuidle: Fix typos
  intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: McBSP: tx_irq_completion used in rx_irq_handler
  omap: Fix compile dependency to LEDS_CLASS

Prevent from recursively locking the reiserfs lock in reiserfs_unpack()
because we may call journal_begin() that requires the lock to be taken
only once, otherwise it won't be able to release the lock while taking
other mutexes, ending up in inverted dependencies between the journal
mutex and the reiserfs lock for example.

This fixes:

  =======================================================
  [ INFO: possible circular locking dependency detected ]
  2.6.35.4.4a #3
  -------------------------------------------------------
  lilo/1620 is trying to acquire lock:
   (&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]

  but task is already holding lock:
   (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
         [<c10562b7>] lock_acquire+0x67/0x80
         [<c12facad>] __mutex_lock_common+0x4d/0x410
         [<c12fb0c8>] mutex_lock_nested+0x18/0x20
         [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]
         [<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs]
         [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
         [<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs]
         [<c10b6a20>] do_remount_sb+0x60/0x110
         [<c10cee25>] do_mount+0x625/0x790
         [<c10cf014>] sys_mount+0x84/0xb0
         [<c12fca3d>] syscall_call+0x7/0xb

  -> #0 (&journal->j_mutex){+.+...}:
         [<c10560f6>] __lock_acquire+0x1026/0x1180
         [<c10562b7>] lock_acquire+0x67/0x80
         [<c12facad>] __mutex_lock_common+0x4d/0x410
         [<c12fb0c8>] mutex_lock_nested+0x18/0x20
         [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
         [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
         [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
         [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
         [<c10db9db>] __block_prepare_write+0x1bb/0x3a0
         [<c10dbbe6>] block_prepare_write+0x26/0x40
         [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
         [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
         [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
         [<c10c3188>] vfs_ioctl+0x28/0xa0
         [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
         [<c10c3eb3>] sys_ioctl+0x63/0x70
         [<c12fca3d>] syscall_call+0x7/0xb

  other info that might help us debug this:

  2 locks held by lilo/1620:
   #0:  (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs]
   #1:  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  stack backtrace:
  Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3
  Call Trace:
   [<c10560f6>] __lock_acquire+0x1026/0x1180
   [<c10562b7>] lock_acquire+0x67/0x80
   [<c12facad>] __mutex_lock_common+0x4d/0x410
   [<c12fb0c8>] mutex_lock_nested+0x18/0x20
   [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
   [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
   [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
   [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
   [<c10db9db>] __block_prepare_write+0x1bb/0x3a0
   [<c10dbbe6>] block_prepare_write+0x26/0x40
   [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
   [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
   [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
   [<c10c3188>] vfs_ioctl+0x28/0xa0
   [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
   [<c10c3eb3>] sys_ioctl+0x63/0x70
   [<c12fca3d>] syscall_call+0x7/0xb
Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: All since 2.6.32 <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The reiserfs mutex already depends on the inode mutex, so we can't lock
the inode mutex in reiserfs_unpack() without using the safe locking API,
because reiserfs_unpack() is always called with the reiserfs mutex locked.

This fixes:

  =======================================================
  [ INFO: possible circular locking dependency detected ]
  2.6.35c #13
  -------------------------------------------------------
  lilo/1606 is trying to acquire lock:
   (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]

  but task is already holding lock:
   (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
         [<c1056347>] lock_acquire+0x67/0x80
         [<c12f083d>] __mutex_lock_common+0x4d/0x410
         [<c12f0c58>] mutex_lock_nested+0x18/0x20
         [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]
         [<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs]
         [<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs]
         [<c10b7d17>] get_sb_bdev+0x117/0x170
         [<d0313e21>] get_super_block+0x21/0x30 [reiserfs]
         [<c10b74ba>] vfs_kern_mount+0x6a/0x1b0
         [<c10b7659>] do_kern_mount+0x39/0xe0
         [<c10cebe0>] do_mount+0x340/0x790
         [<c10cf0b4>] sys_mount+0x84/0xb0
         [<c12f25cd>] syscall_call+0x7/0xb

  -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
         [<c1056186>] __lock_acquire+0x1026/0x1180
         [<c1056347>] lock_acquire+0x67/0x80
         [<c12f083d>] __mutex_lock_common+0x4d/0x410
         [<c12f0c58>] mutex_lock_nested+0x18/0x20
         [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
         [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
         [<c10c3228>] vfs_ioctl+0x28/0xa0
         [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
         [<c10c3f53>] sys_ioctl+0x63/0x70
         [<c12f25cd>] syscall_call+0x7/0xb

  other info that might help us debug this:

  1 lock held by lilo/1606:
   #0:  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  stack backtrace:
  Pid: 1606, comm: lilo Not tainted 2.6.35c #13
  Call Trace:
   [<c1056186>] __lock_acquire+0x1026/0x1180
   [<c1056347>] lock_acquire+0x67/0x80
   [<c12f083d>] __mutex_lock_common+0x4d/0x410
   [<c12f0c58>] mutex_lock_nested+0x18/0x20
   [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
   [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
   [<c10c3228>] vfs_ioctl+0x28/0xa0
   [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
   [<c10c3f53>] sys_ioctl+0x63/0x70
   [<c12f25cd>] syscall_call+0x7/0xb
Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org>		[2.6.32 and later]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I moved couple years ago, so let's update my email and snail mail.

And I do not have any access to Matrox hardware anymore, and I'm quite
unresponsive to matroxfb bug reports (sorry Alan), so saying that I'm
maintainer is a bit far fetched.

For ncpfs I do not use ncpfs in my daily life either, but at least I can
test that one, so I can stay listed here for odd fixes.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Having the limits file world readable will ease the task of system
management on systems where root privileges might be restricted.

Having admin restricted with root priviledges, he/she could not check
other users process' limits.

Also it'd align with most of the /proc stat files.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Eugene Teo <eugene@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the original list is a POT in length, the first callback from line 73
will pass a==b both pointing to the original list_head.  This is dangerous
because the 'list_sort()' user can use 'container_of()' and accesses the
"containing" object, which does not necessary exist for the list head.  So
the user can access RAM which does not belong to him.  If this is a write
access, we can end up with memory corruption.
Signed-off-by: Don Mullis <don.mullis@gmail.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semctl syscall has several code paths that lead to the leakage of
uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO,
IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete
version of the semid_ds struct.

The copy_semid_to_user() function declares a semid_ds struct on the stack
and copies it back to the user without initializing or zeroing the
"sem_base", "sem_pending", "sem_pending_last", and "undo" pointers,
allowing the leakage of 16 bytes of kernel stack memory.

The code is still reachable on 32-bit systems - when calling semctl()
newer glibc's automatically OR the IPC command with the IPC_64 flag, but
invoking the syscall directly allows users to use the older versions of
the struct.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Array of udimm sysfs attributes was not ended with NULL marker, leading to
dereference of random memory.

  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm0
  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm1
  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm2
  BUG: unable to handle kernel NULL pointer dereference at 00000000000001a4
  IP: [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  Pid: 1, comm: swapper Not tainted 2.6.36-rc3-nv+ #483 P6T SE/System Product Name
  RIP: 0010:[<ffffffff81330b36>]  [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  (...)
  Call Trace:
   [<ffffffff81330b86>] edac_create_mci_instance_attributes+0x198/0x1f1
   [<ffffffff81330c9a>] edac_create_sysfs_mci_device+0xbb/0x2b2
   [<ffffffff8132f533>] edac_mc_add_mc+0x46b/0x557
   [<ffffffff81428901>] i7core_probe+0xccf/0xec0
  RIP  [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  ---[ end trace 20de320855b81d78 ]---
  Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc64 allmodconfig:

  drivers/serial/mrst_max3110.c: In function `serial_m3110_startup':
  drivers/serial/mrst_max3110.c:470: error: `IRQ_TYPE_EDGE_FALLING' undeclared (first use in this function)

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the warnings

  arch/m68k/mac/macboing.c: In function 'mac_mksound':
  arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell':
  arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell':
  arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha allmodconfig:

  drivers/serial/mfd.c:144: error: implicit declaration of function 'kzalloc'
  drivers/serial/mfd.c:144: warning: assignment makes pointer from integer without a cast

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kfifo_dma family of functions use sg_mark_end() on the last element in
their scatterlist.  This forces use of a fresh scatterlist for each DMA
operation, which makes recycling a single scatterlist impossible.

Change the behavior of the kfifo_dma functions to match the usage of the
dma_map_sg function.  This means that users must respect the returned
nents value.  The sample code is updated to reflect the change.

This bug is trivial to cause: call kfifo_dma_in_prepare() such that it
prepares a scatterlist with a single entry comprising the whole fifo.
This is the case when you map the entirety of a newly created empty fifo.
This causes the setup_sgl() function to mark the first scatterlist entry
as the end of the chain, no matter what comes after it.

Afterwards, add and remove some data from the fifo such that another call
to kfifo_dma_in_prepare() will create two scatterlist entries.  It returns
nents=2.  However, due to the previous sg_mark_end() call, sg_is_last()
will now return true for the first scatterlist element.  This causes the
sample code to print a single scatterlist element when it should print
two.

By removing the call to sg_mark_end(), we make the API as similar as
possible to the DMA mapping API.  All users are required to respect the
returned nents.
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cifs_reconnect_tcon is called from smb_init. After a successful
reconnect, cifs_reconnect_tcon will call reset_cifs_unix_caps. That
function will, in turn call CIFSSMBQFSUnixInfo and CIFSSMBSetFSUnixInfo.
Those functions also call smb_init.

It's possible for the session and tcon reconnect to succeed, and then
for another cifs_reconnect to occur before CIFSSMBQFSUnixInfo or
CIFSSMBSetFSUnixInfo to be called. That'll cause those functions to call
smb_init and cifs_reconnect_tcon again, ad infinitum...

Break the infinite recursion by having those functions use a new
smb_init variant that doesn't attempt to perform a reconnect.
Reported-and-Tested-by: Michal Suchanek <hramrach@centrum.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

If the soon-to-be scanout buffer is partly covering the intended
VRAM region, move and pin will fail. In that case, just move it out
to system before attempting to move it in again.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The removed code causes oopses with newer drms on master drop.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is to avoid accessing uninitialized data during
drm_irq_uninstall and vblank ioctls. At the same time, enable error check from
drm_kms_init which previously appeared to ignore all errors.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We add an option not to enable fbdev, this option is off (0) by default.
Not enabling fbdev at load time makes it possible to co-operate with
vga16fb and vga text mode when VT switching.

However, if 3D resources are active when VT switching, we're currently
not able to switch over to vga, due to device limitations.
This fixes a bug where we previously lost 3D state during VT switch.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/vmwgfx: Fix breakage introduced by commit "drm: block userspace under allocating buffer and having drivers overwrite it (v2)"

The mentioned commit breaks the vmwgfx ioctl argument sanity check.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In order to be fully threadsafe we need to check that the drm_gem_object
refcount is still 0 after acquiring the mutex in order to call the free
function. Otherwise, we may encounter scenarios like:

Thread A:                                        Thread B:
drm_gem_close
unreference_unlocked
kref_put                                         mutex_lock
...                                              i915_gem_evict
...                                              kref_get -> BUG
...                                              i915_gem_unbind
...                                              kref_put
...                                              i915_gem_object_free
...                                              mutex_unlock
mutex_lock
i915_gem_object_free -> BUG
i915_gem_object_unbind
kfree
mutex_unlock

Note that no driver is currently using the free_unlocked vfunc and it is
scheduled for removal, hasten that process.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>