- 04 Nov, 2013 39 commits
-
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox driver updates This patch set from Jack Morgenstein does the following: 1. Fix MAC/VLAN SRIOV implementation, and add wrapper functions for VLAN allocation and de-allocation (patches 1-6). 2. Implements resource quotas when running under SRIOV (patches 7-10). Patch 7 is a small bug fix, and patches 8-10 implement the quotas. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. The series is against net-next commit ba486502 "ipv6: remove the unnecessary statement in find_match()" changes from V0: - dropped the 1st patch which needs to go to -stable and hence through net, not net-next ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Implements resource quota grant decision when resources are requested, for the following resources: QPs, CQs, SRQs, MPTs, MTTs, vlans, MACs, and Counters. When granting a resource, the quota system increases the allocated-count for that slave. When the slave later frees the resource, its allocated-count is reduced. A spinlock is used to protect the integrity of each resource's free-pool counter. (One slave may be in the process of being granted a resource while another slave has crashed, initiating cleanup of that slave's resource quotas). Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
In current kernels, the mlx4 driver running on a VM does not differentiate between max resource numbers for the HCA and max quotas -- it simply takes the quota values passed to it as max-resource values. However, the driver actually requires the VFs to be aware of the actual number of resources that the HCA was initialized with, for QPs, CQs, SRQs and MPTs. For QPs, CQs and SRQs, the reason is that in completion handling the driver must know which of the 24 bits are the actual resource number, and which are "padding" bits. For MPTs, also, the driver assumes knowledge of the number of MPTs in the system. The previous commit fixes the quota logic on the VM for the quota values passed to it by QUERY_FUNC_CAPS. For QPs, CQs, SRQs, and MPTs, it takes the max resource numbers from QUERY_HCA (and not QUERY_FUNC_CAPS). The quotas passed in QUERY_FUNC_CAPS are used to report max resource number values in the response to ib_query_device. However, the Hypervisor driver must consider that VMs may be running previous kernels, and compatibility must be preserved. To resolve the incompatibility with previous kernels running on VMs, we deprecated the quota fields in mlx4_QUERY_FUNC_CAP. In the deprecated fields, we pass the max-resource values from INIT_HCA The quota fields are moved to a new location, and the current kernel driver takes the proper values from that location. There is also a new flag in dword 0, bit 28 of the mlx4_QUERY_FUNC_CAP mailbox; if this flag is set, the (VM) driver takes the quota values from the new location. VMs running previous kernels will work properly, except that the max resource numbers reported in ib_query_device for these resources will be too high. The Hypervisor driver will, however, enforce the quotas for these VMs. Signed-off-by:
-
Jack Morgenstein authored
This is step #1 for implementing SRIOV resource quotas for VFs. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC, VLAN, and Counters. The quota system works as follows: Each entity (VF or PF) is given a max number of a given resource (its quota), and a guaranteed minimum number for each resource (starvation prevention). For QPs, CQs, SRQs, MPTs and MTTs: 50% of the available quantity for the resource is divided equally among the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool. The other 50% is the "free pool", allocated on a first-come-first-serve basis. For each VF/PF, resources are first allocated from its "guaranteed-minimum" pool. When that pool is exhausted, the driver attempts to allocate from the resource "free-pool". The quota (i.e., max) for the VFs and the PF is: The free-pool amount (50% of the real max) + the guaranteed minimum For MACs: Guarantee 2 MACs per VF/PF per port. As a result, since we have only 128 MACs per port, reduce the allowable number of VFs from 64 to 63. Any remaining MACs are put into a free pool. For VLANs: For the PF, the per-port quota is 128 and guarantee is 64 (to allow the PF to register at least a VLAN per VF in VST mode). For the VFs, the per-port quota is 64 and the guarantee is 0. We assume that VGT VFs are trusted not to abuse the VLAN resource. For Counters: For all functions (PF and VFs), the quota is 128 and the guarantee is 0. In this patch, we define the needed structures, which are added to the resource-tracker struct. In addition, we do initialization for the resource quota, and adjust the query_device response to use quotas rather than resource maxima. As part of the implementation, we introduce a new field in mlx4_dev: quotas. This field holds the resource quotas used to report maxima to the upper layers (ib_core, via query_device). The HCA maxima of these values are passed to the VFs (via QUERY_HCA) so that they may continue to use these in handling QPs, CQs, SRQs and MPTs. Signed-off-by: -
Jack Morgenstein authored
In procedure mlx4_init_mr_table(), slaves should do no processing, but should return success. This initialization is hypervisor-only. However, the check for num_mpts being a power-of-2 was performed before the check to return immediately if the driver is for a slave. This resulted in spurious failures. The order of performing the checks is reversed, so that if the driver is for a slave, no processing is done and success is returned. Signed-off-by:
-
Jack Morgenstein authored
In upstream kernels under SRIOV, the vlan register/unregister calls were NOPs (doing nothing and returning OK). We detect these old calls from guests (via the comm channel), since previously the port number in mlx4_register_vlan was passed (improperly) in the out_param. This has been corrected so that the port number is now passed in bits 8..15 of the in_modifier field. For old calls, these bits will be zero, so if the passed port number is zero, we can still look at the out_param field to see if it contains a valid port number. If yes, the VM is running an old driver. Since for old drivers, the register/unregister_vlan wrappers were NOPs, we continue this policy -- the reason being that upstream had an additional bug in eth driver running on guests (where procedure mlx4_en_vlan_rx_kill_vid() had the following code: if (!mlx4_find_cached_vlan(mdev->dev, priv->port, vid, &idx)) mlx4_unregister_vlan(mdev->dev, priv->port, idx); else en_err(priv, "could not find vid %d in cache\n", vid); On a VM, mlx4_find_cached_vlan() will always fail, since the vlan cache is located on the Hypervisor; on guests it is empty. Therefore, if we allow upstream guests to register vlans, we will have vlan leakage since the unregister will never be performed. Leaving vlan reg/unreg for old guest drivers as a NOP is not a feature regression, since in upstream the register/unregister vlan wrapper is a NOP. Signed-off-by: -
Jack Morgenstein authored
Add resource tracker support for reg/unreg vlans calls done by VFs. Signed-off-by:
-
Jack Morgenstein authored
Use of vlan_index created problems unregistering vlans on guests. In addition, tools delete vlan by tag, not by index, lets follow that. Signed-off-by:
-
Jack Morgenstein authored
The functions mlx4_register_vlan, mlx4_unregister_vlan, mlx4_register_mac, mlx4_unregister_mac all made illegal use of the out_param in multifunc mode to pass the port number. The firmware spec specifies that the port number should be passed in bits 8..15 of the input-modifier field for ALLOC_RES and FREE_RES (sections 20.15.1 and 20.15.2). For MAC register/unregister, this patch contains workarounds so that guests running previous kernels continue to work on a new Hypervisor, and guests running the new kernel will continue to work on old hypervisors. Vlan registeration capability is still not operational in multifunction mode, since the vlan wrapper functions are not implemented in this patch. Signed-off-by:
-
Jack Morgenstein authored
The reg/unreg vlan code was broken: 1. a wrapped function called another wrapped function, causing a deadlock. 2. unregister_vlan called cmd_box instead of cmd_box_imm, leading to incorrectly passed parameters. Signed-off-by:
-
Sergei Shtylyov authored
Check the platform data pointer before dereferencing it and error out of the probe() method if it's NULL. This has additional effect of preventing kernel oops with outdated platform data containing zero PHY address instead (such as on SolutionEngine7710). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
David S. Miller authored
Bjørn Mork says: ==================== cdc_mbim + qmi_wwan trivial fixes This series fixes three problems Oliver pointed out during the review of the new huawei_cdc_ncm driver: http://patchwork.ozlabs.org/patch/278903/ That innocent driver only used cdc_mbim as a blueprint, and all the blame should really have gone to me.... I do have a similar fix for the manage_power issue in the cdc-wdm USB class driver as well. It will be submitted to linux-usb as soon as Greg opens up his mailbox again :-) ==================== Signed-off-by:
-
Bjørn Mork authored
Reported-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
Reported-by:
-
Bjørn Mork authored
Reported-by:
-
Bjørn Mork authored
Reported-by:
-
Bjørn Mork authored
Reported-by:
-
David S. Miller authored
Himanshu Madhani says: ==================== qlcnic: Multiple Tx queue support and code refactoring This Patch series contains following changes o Refactored code to calculate, validate and assign Tx/SDS rings for various modes of driver. o Enhanced ethtool statistics for multi Tx queue on all supported adapters. o Enable multiple Tx queue for 83xx and 84xx Series adapters. o Register netdev for failed device state. changes from v1 -> v2 o Dropped patch to replace inappropriate usage of kzalloc() with vzalloc(). Please apply to net-next. ==================== Signed-off-by: -
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Himanshu Madhani authored
o 83xx and 84xx firmware is capable of multiple Tx queues. This patch will enable multiple Tx queues for 83xx/84xx series adapters. Max number of Tx queues supported will be 8. Signed-off-by:
-
Himanshu Madhani authored
o Current driver has duplicate code for validating user input for changing Tx/SDS rings using set_channel ethtool interface. This patch removes duplicate code and refactored Tx/SDS ring validation for 82xx/83xx/84xx series adapter. o Refactored code now calculates maximum Tx/Rx ring driver can support based on Default, NPAR and SRIOV PF/VF mode of driver. Signed-off-by:
-
Himanshu Madhani authored
o Enhance ethtool statistics to display multiple Tx queue stats for all supported adapters. Signed-off-by:
-
Sucheta Chakraborty authored
o Without failing probe, register netdev when device is in FAILED state. o Device will come up with minimum functionality and allow diagnostics and repair of the adapter. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Daniel Borkmann authored
We can safely reduce the number of test cases by a tenth. There is no particular need to run as many as we're running now for crc32{,c}_combine, that gives us still ~8000 tests we're doing if people run kernels with crc selftests enabled which is perfectly fine. Signed-off-by:Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
Fengguang reports that when crc32 selftests are running on startup, on some e.g. 32bit systems, we can get a CPU stall like "INFO: rcu_sched self-detected stall on CPU { 0} (t=2101 jiffies g=4294967081 c=4294967080 q=41)". As this is not intended, add a cond_resched() at the end of a test case to fix it. Introduced by efba721f ("lib: crc32: add test cases for crc32{, c}_combine routines"). Reported-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Daniel Borkmann authored
This patch fixes a build warning in skb_checksum() by wrapping the csum_partial() usage in skb_checksum(). The problem is that on a few architectures, csum_partial is used with prefix asmlinkage whereas on most architectures it's not. So fix this up generically as we did with csum_block_add_ext() to match the signature. Introduced by 2817a336 ("net: skb_checksum: allow custom update/combine for walking skb"). Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/netconsole.c net/bridge/br_private.h Three mostly trivial conflicts. The net/bridge/br_private.h conflict was a function signature (argument addition) change overlapping with the extern removals from Joe Perches. In drivers/net/netconsole.c we had one change adjusting a printk message whilst another changed "printk(KERN_INFO" into "pr_info(". Lastly, the emulex change was a new inline function addition overlapping with Joe Perches's extern removals. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "I'm sending a pull request of these lingering bug fixes for networking before the normal merge window material because some of this stuff I'd like to get to -stable ASAP" 1) cxgb3 stopped working on 32-bit machines, fix from Ben Hutchings. 2) Structures passed via netlink for netfilter logging are not fully initialized. From Mathias Krause. 3) Properly unlink upper openvswitch device during notifications, from Alexei Starovoitov. 4) Fix race conditions involving access to the IP compression scratch buffer, from Michal Kubrecek. 5) We don't handle the expiration of MTU information contained in ipv6 routes sometimes, fix from Hannes Frederic Sowa. 6) With Fast Open we can miscompute the TCP SYN/ACK RTT, from Yuchung Cheng. 7) Don't take TCP RTT sample when an ACK doesn't acknowledge new data, also from Yuchung Cheng. 8) The decreased IPSEC garbage collection threshold causes problems for some people, bump it back up. From Steffen Klassert. 9) Fix skb->truesize calculated by tcp_tso_segment(), from Eric Dumazet. 10) flow_dissector doesn't validate packet lengths sufficiently, from Jason Wang * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) net/mlx4_core: Fix call to __mlx4_unregister_mac net: sctp: do not trigger BUG_ON in sctp_cmd_delete_tcb net: flow_dissector: fail on evil iph->ihl xfrm: Fix null pointer dereference when decoding sessions can: kvaser_usb: fix usb endpoints detection can: c_can: Fix RX message handling, handle lost message before EOB doc:net: Fix typo in Documentation/networking bgmac: don't update slot on skb alloc/dma mapping error ibm emac: Fix locking for enable/disable eob irq ibm emac: Don't call napi_complete if napi_reschedule failed virtio-net: correctly handle cpu hotplug notifier during resuming bridge: pass correct vlan id to multicast code net: x25: Fix dead URLs in Kconfig netfilter: xt_NFQUEUE: fix --queue-bypass regression xen-netback: use jiffies_64 value to calculate credit timeout cxgb3: Fix length calculation in write_ofld_wr() on 32-bit architectures bnx2x: Disable VF access on PF removal bnx2x: prevent FW assert on low mem during unload tcp: gso: fix truesize tracking xfrm: Increase the garbage collector threshold ... -
Jack Morgenstein authored
In function mlx4_master_deactivate_admin_state() __mlx4_unregister_mac was called using the MAC index. It should be called with the value of the MAC itself. Signed-off-by:
-
git://gitorious.org/linux-can/linux-canDavid S. Miller authored
Marc Kleine-Budde says: ==================== I have two late fixes for the v3.12 release: The first patch fixes a problem in the c_can's RX message handling, which can lead to an endless interrupt loop under heavy load if messages are lost. The second patch is by Olivier Sobrie and fixes the endpoint detection of the kvaser_usb driver, which is needed for some devices. ==================== Signed-off-by: -
Daniel Borkmann authored
Introduced in f9e42b85 ("net: sctp: sideeffect: throw BUG if primary_path is NULL"), we intended to find a buggy assoc that's part of the assoc hash table with a primary_path that is NULL. However, we better remove the BUG_ON for now and find a more suitable place to assert for these things as Mark reports that this also triggers the bug when duplication cookie processing happens, and the assoc is not part of the hash table (so all good in this case). Such a situation can for example easily be reproduced by: tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 1 1 1 1 1 1 tc qdisc add dev eth0 parent 1:2 handle 20: netem loss 20% tc filter add dev eth0 protocol ip parent 1: prio 2 u32 match ip \ protocol 132 0xff match u8 0x0b 0xff at 32 flowid 1:2 This drops 20% of COOKIE-ACK packets. After some follow-up discussion with Vlad we came to the conclusion that for now we should still better remove this BUG_ON() assertion, and come up with two follow-ups later on, that is, i) find a more suitable place for this assertion, and possibly ii) have a special allocator/initializer for such kind of temporary assocs. Reported-by:
Mark Thomas <Mark.Thomas@metaswitch.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Arvid Brodin authored
High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by:Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by:
-
Eric Dumazet authored
Joby Poriyath provided a xen-netback patch to reduce the size of xenvif structure as some netdev allocation could fail under memory pressure/fragmentation. This patch is handling the problem at the core level, allowing any netdev structures to use vmalloc() if kmalloc() failed. As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT to kzalloc() flags to do this fallback only when really needed. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Joby Poriyath <joby.poriyath@citrix.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== SCTP fix/updates Please see patch 5 for the main description/motivation, the rest just brings in the needed functionality for that. Although this is actually a fix, I've based it against net-next as some additional work for fixing it was needed. ==================== Acked-by:
-
Daniel Borkmann authored
This fixes an outstanding bug found through IPVS, where SCTP packets with skb->data_len > 0 (non-linearized) and empty frag_list, but data accumulated in frags[] member, are forwarded with incorrect checksum letting SCTP initial handshake fail on some systems. Linearizing each SCTP skb in IPVS to prevent that would not be a good solution as this leads to an additional and unnecessary performance penalty on the load-balancer itself for no good reason (as we actually only want to update the checksum, and can do that in a different/better way presented here). The actual problem is elsewhere, namely, that SCTP's checksumming in sctp_compute_cksum() does not take frags[] into account like skb_checksum() does. So while we are fixing this up, we better reuse the existing code that we have anyway in __skb_checksum() and use it for walking through the data doing checksumming. This will not only fix this issue, but also consolidates some SCTP code with core sk_buff code, bringing it closer together and removing respectively avoiding reimplementation of skb_checksum() for no good reason. As crc32c() can use hardware implementation within the crypto layer, we leave that intact (it wraps around / falls back to e.g. slice-by-8 algorithm in __crc32c_le() otherwise); plus use the __crc32c_le_combine() combinator for crc32c blocks. Also, we remove all other SCTP checksumming code, so that we only have to use sctp_compute_cksum() from now on; for doing that, we need to transform SCTP checkumming in output path slightly, and can leave the rest intact. Signed-off-by:
-
Daniel Borkmann authored
Currently, skb_checksum walks over 1) linearized, 2) frags[], and 3) frag_list data and calculats the one's complement, a 32 bit result suitable for feeding into itself or csum_tcpudp_magic(), but unsuitable for SCTP as we're calculating CRC32c there. Hence, in order to not re-implement the very same function in SCTP (and maybe other protocols) over and over again, use an update() + combine() callback internally to allow for walking over the skb with different algorithms. Signed-off-by:
-
Daniel Borkmann authored
We already have 100 test cases for crcs itself, so split the test buffer with a-prio known checksums, and test crc of two blocks against crc of the whole block for the same results. Output/result with CONFIG_CRC32_SELFTEST=y: [ 2.687095] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 2.687097] crc32: self tests passed, processed 225944 bytes in 278177 nsec [ 2.687383] crc32c: CRC_LE_BITS = 64 [ 2.687385] crc32c: self tests passed, processed 225944 bytes in 141708 nsec [ 7.336771] crc32_combine: 113072 self tests passed [ 12.050479] crc32c_combine: 113072 self tests passed [ 17.633089] alg: No test for crc32 (crc32-pclmul) Signed-off-by:
-
Daniel Borkmann authored
This patch adds a combinator to merge two or more crc32{,c}s into a new one. This is useful for checksum computations of fragmented skbs that use crc32/crc32c as checksums. The arithmetics for combining both in the GF(2) was taken and slightly modified from zlib. Only passing two crcs is insufficient as two crcs and the length of the second piece is needed for merging. The code is made generic, so that only polynomials need to be passed for crc32_le resp. crc32c_le. Signed-off-by: -
Daniel Borkmann authored
This is nothing more but a whitepace cleanup, as 80 chars is not a hard but soft limit, and otherwise makes the test cases array really look ugly. So fix it up. Signed-off-by:
-
- 03 Nov, 2013 1 commit
-
-
Linus Torvalds authored
-
