- 24 Sep, 2014 11 commits
-
-
Tomas Winkler authored
Rename mei_cl_irq_close to mei_cl_irq_disconnect and MEI_FOP_CLOSE to MEI_FOP_DISCONNECT Remove unused MEI_FOP_OPEN Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
HBM uses global list of status values from which the values of particular commands are derived Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
When handling dynamic clients there might be a race scenario in which two me clients with the same me address would be linked in the me clients list, therefore we need to search by both uuid and me address. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
To support dynamic addition/remove we add wrappers for removal of me clients Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
To support dynamic addition/remove of clients it is more convenient to use list instead of static array Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
For support of dynamic addition and removal of me clients it is more convenient to use a list instead of static array as is use now. As the first step of the transition to the new data structure we change the lookup function so it returns me client address instead of an index. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
Reduce few code lines by using wrappers for sending simple hbm client messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
Use consistently me_addr name in hbm protocol structures to represent in firmware client address Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
Amthif has its own queues therefore it is redundant to check the client type when processing the queues Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
Replace open coded loop with an existing service function: mei_io_list_flush Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
We cannot handle user interrupt in context of hw initialization so we only wait for time out which is reasonably short Also we don't need to check error from wait, only flag value. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 Sep, 2014 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'extcon-next-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for v3.18 This patchset add new extcon provider driver and fix minor issue of extcon driver. Detailed description for patchset: 1. Add new Richtek RT8973A extcon driver This driver support for Richtek RT8973A which is Micro USB Switch OVP and i2c interface. The RT8973A is a USB port accessory detector and switch that is optimized to protect low voltage system from abnormal high input voltage (up to 28V) and supports high speed USB operation. Also, RT8973A support 'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A would control internal h/w patch for USB D-/D+ switching. 2. Fix code cleanup for other extcon driver - extcon-sm5502 driver : Fix bug to check cable type and build break. : Move header file from include/linux/extcon to drivers/extcon because this header file is only user for extcon-sm5502.c. : Clean up codes by using checkpatch script - extcon-max77693 driver : Use resource managed interrupt function : Fix bug to set ADC debounce time - extcon-gpio driver : Fix minor code cleanup
-
- 22 Sep, 2014 10 commits
-
-
George Cherian authored
This patch fixes following minor cleanup: - Order the include files in alphabetical order. - Fix description of state_off in extcon_gpio.h - Add a descrition for check_on_resume in extcon_gpio.h Signed-off-by: George Cherian <george.cherian@ti.com> [Modify the name/description of patch to keep standary codiyg style by Chanwoo Choi] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Jonghwa Lee authored
When it writes some value other than 0 to BTLDset and JIGset, muic device will be reset automatically. And it happens during updating ADC debounce time, because it shares same register. To update ADC debounce time without reset, set value only to ADCDbset and 0 to BTLDset and JIGset. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> [Remove un-needed masking operation by Chanwoo Choi] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Jean Delvare authored
Don't include <linux/input.h> when the driver does not use anything from this header file. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
-
Krzysztof Kozlowski authored
Use resource managed interrupt line devm_request_threaded_irq() to simplify a little cleanup paths: - no goto to cleanup label, - simpler remove function. Overall the driver size is decreased by 11 line of code. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Chanwoo Choi authored
This patch add documentation for binding of Richtek RT8973A (Micro USB Switch) device which is using EXTCON subsystem. The RT8973A device can detect various external accessories when external accessories is attached or detached. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Chanwoo Choi authored
This patch add support for Richtek RT8973A which is Micro USB Switch OVP and i2c interface. The RT8973A is a USB port accessory detector and switch that is optimized to protect low voltage system from abnormal high input voltage (up to 28V) and supports high speed USB operation. Also, RT8973A support 'auto-configuration' mode. If auto-configuration mode is enabled, RT8973A would control internal h/w patch for USB D-/D+ switching. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
-
Chanwoo Choi authored
This patch just clean up codes by using checkpatch script and fix warning message about if statement. - the result of checkpatch script as following: WARNING: void function return statements are not generally useful + return; +} WARNING: quoted string split across lines + dev_err(info->dev, "failed: irq request (IRQ: %d," + " error :%d)\n", muic_irq->irq, ret); - warning message about coding style. drivers/extcon/extcon-sm5502.c:398 sm5502_muic_cable_handler() warn: we tested 'attached' before and it was 'false' Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Chanwoo Choi authored
This patch move sm5502.h header file from 'include/linux/extcon' to 'driver/extcon' because sm5502.h is used for driver/extcon/extcon-sm5502.c. and remove duplicate license description. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Chanwoo Choi authored
This patch add I2C configuration dependency to fix following build break. If specific kernel build I2C as module, extcon-sm5502 have to depend on I2C configuration. drivers/built-in.o: In function `regmap_smbus_byte_reg_read': regmap-i2c.c:(.text+0x5030a): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `regmap_smbus_byte_reg_write': regmap-i2c.c:(.text+0x50338): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `regmap_smbus_word_reg_read': regmap-i2c.c:(.text+0x50356): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `regmap_smbus_word_reg_write': regmap-i2c.c:(.text+0x50384): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `regmap_i2c_read': regmap-i2c.c:(.text+0x503cf): undefined reference to `i2c_transfer' drivers/built-in.o: In function `regmap_i2c_gather_write': regmap-i2c.c:(.text+0x50442): undefined reference to `i2c_transfer' drivers/built-in.o: In function `regmap_i2c_write': regmap-i2c.c:(.text+0x50474): undefined reference to `i2c_master_send' drivers/built-in.o: In function `sm5502_muic_i2c_init': extcon-sm5502.c:(.init.text+0x6630): undefined reference to `i2c_register_driver' Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
Chanwoo Choi authored
This patch fix bug when checking cable type. SM5502 have to use ADC value to get correct cable type. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
-
- 15 Sep, 2014 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "double iput() on failure exit in lustre, racy removal of spliced dentries from ->s_anon in __d_materialise_dentry() plus a bunch of assorted RCU pathwalk fixes" The RCU pathwalk fixes end up fixing a couple of cases where we incorrectly dropped out of RCU walking, due to incorrect initialization and testing of the sequence locks in some corner cases. Since dropping out of RCU walk mode forces the slow locked accesses, those corner cases slowed down quite dramatically. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: be careful with nd->inode in path_init() and follow_dotdot_rcu() don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu() fix bogus read_seqretry() checks introduced in b37199e6 move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon) [fix] lustre: d_make_root() does iput() on dentry allocation failure
-
Linus Torvalds authored
The performance regression that Josef Bacik reported in the pathname lookup (see commit 99d263d4 "vfs: fix bad hashing of dentries") made me look at performance stability of the dcache code, just to verify that the problem was actually fixed. That turned up a few other problems in this area. There are a few cases where we exit RCU lookup mode and go to the slow serializing case when we shouldn't, Al has fixed those and they'll come in with the next VFS pull. But my performance verification also shows that link_path_walk() turns out to have a very unfortunate 32-bit store of the length and hash of the name we look up, followed by a 64-bit read of the combined hash_len field. That screws up the processor store to load forwarding, causing an unnecessary hickup in this critical routine. It's caused by the ugly calling convention for the "hash_name()" function, and easily fixed by just making hash_name() fill in the whole 'struct qstr' rather than passing it a pointer to just the hash value. With that, the profile for this function looks much smoother. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Sep, 2014 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "The most important patch is a new Light Weigth Syscall (LWS) for 8, 16, 32 and 64 bit atomic CAS operations which is required in order to be able to implement the atomic gcc builtins on our platform. Other than that, we wire up the seccomp, getrandom and memfd_create syscalls, fixes a minor off-by-one bug and a wrong printk string" * 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement new LWS CAS supporting 64 bit operations. parisc: Wire up seccomp, getrandom and memfd_create syscalls parisc: dino: fix %d confusingly prefixed with 0x in format string parisc: sys_hpux: NUL terminator is one past the end
-
Al Viro authored
in the former we simply check if dentry is still valid after picking its ->d_inode; in the latter we fetch ->d_inode in the same places where we fetch dentry and its ->d_seq, under the same checks. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull ntb driver bugfixes from Jon Mason: "NTB driver fixes for queue spread and buffer alignment. Also, update to MAINTAINERS to reflect new e-mail address" * tag 'ntb-3.17' of git://github.com/jonmason/ntb: ntb: Add alignment check to meet hardware requirement MAINTAINERS: update NTB info NTB: correct the spread of queues over mw's
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull ARM irq chip fixes from Thomas Gleixner: "Another pile of ARM specific irq chip fixlets: - off by one bugs in the crossbar driver - missing annotations - a bunch of "make it compile" updates I pulled the lot today from Jason, but it has been in -next for at least a week" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: gic-v3: Declare rdist as __percpu pointer to __iomem pointer irqchip: gic: Make gic_default_routable_irq_domain_ops static irqchip: exynos-combiner: Fix compilation error on ARM64 irqchip: crossbar: Off by one bugs in init irqchip: gic-v3: Tag all low level accessors __maybe_unused irqchip: gic-v3: Only define gic_peek_irq() when building SMP
-
git://git.infradead.org/users/jcooper/linuxThomas Gleixner authored
irqchip fixes for v3.17 from Jason Cooper - GIC/GICV3: Various fixlets - crossbar: Fix off-by-one bug - exynos-combiner: Fix arm64 build error
-
Dave Jiang authored
The NTB translate register must have the value to be BAR size aligned. This alignment check make sure that the DMA memory allocated has the proper alignment. Another requirement for NTB to function properly with memory window BAR size greater or equal to 4M is to use the CMA feature in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and CONFIG_CMA_SIZE_MBYTES set. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Jon Mason authored
Update my contact info to my personal email address and add Dave Jiang. Signed-off-by: Jon Mason <jon.mason@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-
Jon Mason authored
The detection of an uneven number of queues on the given memory windows was not correct. The mw_num is zero based and the mod should be division to spread them evenly over the mw's. Signed-off-by: Jon Mason <jon.mason@intel.com>
-
Al Viro authored
read_seqretry() returns true on mismatch, not on match... Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
and lock the right list there Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
double-free is a bad thing Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 13 Sep, 2014 3 commits
-
-
Linus Torvalds authored
Merge branches 'locking-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull futex and timer fixes from Thomas Gleixner: "A oneliner bugfix for the jinxed futex code: - Drop hash bucket lock in the error exit path. I really could slap myself for intruducing that bug while fixing all the other horror in that code three month ago ... and the timer department is not too proud about the following fixes: - Deal with a long standing rounding bug in the timeval to jiffies conversion. It's a real issue and this fix fell through the cracks for quite some time. - Another round of alarmtimer fixes. Finally this code gets used more widely and the subtle issues hidden for quite some time are noticed and fixed. Nothing really exciting, just the itty bitty details which bite the serious users here and there" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Unlock hb->lock in futex_wait_requeue_pi() error path * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Lock k_itimer during timer callback alarmtimer: Do not signal SIGEV_NONE timers alarmtimer: Return relative times in timer_gettime jiffies: Fix timeval conversion to jiffies
-
Guy Martin authored
The current LWS cas only works correctly for 32bit. The new LWS allows for CAS operations of variable size. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
-
Linus Torvalds authored
Josef Bacik found a performance regression between 3.2 and 3.10 and narrowed it down to commit bfcfaa77 ("vfs: use 'unsigned long' accesses for dcache name comparison and hashing"). He reports: "The test case is essentially for (i = 0; i < 1000000; i++) mkdir("a$i"); On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k dir/sec with 3.10. This is because we spend waaaaay more time in __d_lookup on 3.10 than in 3.2. The new hashing function for strings is suboptimal for < sizeof(unsigned long) string names (and hell even > sizeof(unsigned long) string names that I've tested). I broke out the old hashing function and the new one into a userspace helper to get real numbers and this is what I'm getting: Old hash table had 1000000 entries, 0 dupes, 0 max dupes New hash table had 12628 entries, 987372 dupes, 900 max dupes We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash My test does the hash, and then does the d_hash into a integer pointer array the same size as the dentry hash table on my system, and then just increments the value at the address we got to see how many entries we overlap with. As you can see the old hash function ended up with all 1 million entries in their own bucket, whereas the new one they are only distributed among ~12.5k buckets, which is why we're using so much more CPU in __d_lookup". The reason for this hash regression is two-fold: - On 64-bit architectures the down-mixing of the original 64-bit word-at-a-time hash into the final 32-bit hash value is very simplistic and suboptimal, and just adds the two 32-bit parts together. In particular, because there is no bit shuffling and the mixing boundary is also a byte boundary, similar character patterns in the low and high word easily end up just canceling each other out. - the old byte-at-a-time hash mixed each byte into the final hash as it hashed the path component name, resulting in the low bits of the hash generally being a good source of hash data. That is not true for the word-at-a-time case, and the hash data is distributed among all the bits. The fix is the same in both cases: do a better job of mixing the bits up and using as much of the hash data as possible. We already have the "hash_32|64()" functions to do that. Reported-by: Josef Bacik <jbacik@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-