- 14 Oct, 2008 40 commits
-
-
Steven Rostedt authored
An item in the trace buffer that is bigger than one entry may be split up using the TRACE_CONT entry. This makes it a virtual single entry. The current code increments the iterator index even while traversing TRACE_CONT entries, making it look like the iterator is further than it actually is. This patch adds code to not increment the iterator index while skipping over TRACE_CONT entries. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Steven Rostedt authored
Peter Zijlstra provided me with a nice brown paper bag while letting me know that I was doing a logical AND and not a binary one, making a condition true more often than it should be. Luckily, a false true is handled by the calling function and no harm is done. But this needs to be fixed regardless. Signed-off-by:
-
Michael Ellerman authored
Currently some of the ftrace output goes skewiff if you have more than 9 cpus, and some if you have more than 99. Twiddle with the headers and format strings to make up to 999 cpus display without causing spacing problems. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Steven Rostedt authored
This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: -
Steven Rostedt authored
The warning messages about old objcopy and local functions spam the user quite drastically. Remove the warning until we can find a nicer way of tell the user to upgrade their objcopy. Signed-off-by:
-
Steven Rostedt authored
The mcount record method of ftrace scans objdump for references to mcount. Using mcount as the reference to test if the calls to mcount being replaced are indeed calls to mcount, this use of mcount was also caught as a location to change. Using a variable that points to the mcount address moves this reference into the data section that is not scanned, and we do not use a false location to try and modify. The warn on code was what was used to detect this bug. Signed-off-by:
-
Steven Rostedt authored
This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by:
-
Andrew Morton authored
CHK include/linux/version.h CHK include/linux/utsrelease.h CC scripts/mod/empty.o /bin/sh: /usr/src/25/scripts/recordmcount.pl: Permission denied We shouldn't assume that files have their `x' bits set. There are various ways in which file permissions get lost, including use of patch(1). It might not be correct to assume that perl lives in $PATH? Signed-off-by:
-
Steven Rostedt authored
The --globalize-symbols option came out in objcopy version 2.17. If the kernel is being compiled on a system with a lower version of objcopy, then we can not use the globalize / localize trick to link to symbols pointing to local functions. This patch tests the version of objcopy and will only use the trick if the version is greater than or equal to 2.17. Otherwise, if an object has only local functions within a section, it will give a nice warning and recommend the user to upgrade their objcopy. Leaving the symbols unrecorded is not that big of a deal, since the mcount record method changes the actual mcount code to be a simple "ret" without recording registers or anything. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ingo Molnar authored
enclose the argument in parenthesis. (especially since we cast it, which is a high prio operation) Signed-off-by: -
Stephen Rothwell authored
After disabling FTRACE_MCOUNT_RECORD via a patch, a dormant build failure surfaced: kernel/trace/ftrace.c: In function 'ftrace_record_ip': kernel/trace/ftrace.c:416: error: incompatible type for argument 1 of '_spin_lock_irqsave' kernel/trace/ftrace.c:433: error: incompatible type for argument 1 of '_spin_lock_irqsave' Introduced by commit 6dad8e07f4c10b17b038e84d29f3ca41c2e55cd0 ("ftrace: add necessary locking for ftrace records"). Signed-off-by: -
Steven Rostedt authored
The modification of code is performed either by kstop_machine, before SMP starts, or on module code before the module is executed. There is no reason to do the modifications from assembly. The copy to and from user functions are sufficient and produces cleaner and easier to read code. Thanks to Benjamin Herrenschmidt for suggesting the idea. Signed-off-by:
-
Steven Rostedt authored
During tests and checks, I've discovered that there were failures to convert mcount callers into nops. Looking deeper into these failures, code that was attempted to be changed was not an mcount caller. The current code only updates if the code being changed is what it expects, but I still investigate any time there is a failure. What was happening is that a weak symbol was being used as a reference for other mcount callers. That weak symbol was also referenced elsewhere so the offsets were using the strong symbol and not the function symbol that it was referenced from. This patch changes the setting up of the mcount_loc section to search for a global function that is not weak. It will pick a local over a weak but if only a weak is found in a section, a warning is printed and the mcount location is not recorded (just to be safe). Signed-off-by:
-
Steven Rostedt authored
I'm trying to keep all the arch changes in recordmcount.pl in one place. I moved your code into that area, by adding the flags to the commands that were passed in. Signed-off-by:
-
Jeremy Fitzhardinge authored
I'm seeing when I use separate src/build dirs: make[3]: *** [arch/x86/kernel/time_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/irq_32.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/ldt.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory make[3]: *** [arch/x86/kernel/i8259.o] Error 1 /bin/sh: scripts/recordmcount.pl: No such file or directory This fixes it. Signed-off-by: -
Huang Ying authored
This patch fixes incorrect comment style of __ftrace_enabled_save(). Signed-off-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Steven Rostedt authored
The new design of pre-recorded mcounts and updating the code outside of kstop_machine has changed the way the records themselves are protected. This patch uses the ftrace_lock to protect the records. Note, the lock still does not need to be taken within calls that are only called via kstop_machine, since the that code can not run while the spin lock is held. Also removed the hash_lock needed for the daemon when MCOUNT_RECORD is configured. Also did a slight cleanup of an unused variable. Signed-off-by:
-
Steven Rostedt authored
If one of the self tests of ftrace has disabled the function tracer, do not run the code to convert the mcount calls in modules. Signed-off-by:
-
Frédéric Weisbecker authored
This patch fixes some mistakes on the tracer in warning messages when debugfs fails to create tracing files. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: srostedt@redhat.com Signed-off-by:
-
Ingo Molnar authored
hack around: ld: Relocatable linking with relocations from format elf32-i386 (init/.tmp_gl_calibrate.o) to format elf64-x86-64 (init/.tmp_mx_calibrate.o) i CC arch/x86/mm/extable.o objcopy: 'init/.tmp_mx_calibrate.o': No such file rm: cannot remove `init/.tmp_mx_calibrate.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/extable.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_extable.o) is not supported mv: cannot stat `arch/x86/mm/.tmp_mx_extable.o': No such file or directory ld: Relocatable linking with relocations from format elf32-i386 (arch/x86/mm/fault.o) to format elf64-x86-64 (arch/x86/mm/.tmp_mx_fault.o) is not supported Signed-off-by: -
Ingo Molnar authored
fix: kernel/built-in.o: In function `ftrace_dump': (.text+0x2e2ea): undefined reference to `ftrace_kill_atomic' Signed-off-by: -
Ingo Molnar authored
fix: In file included from init/main.c:65: include/linux/ftrace.h:166: error: expected ‘,' or ‘;' before ‘{' token make[1]: *** [init/main.o] Error 1 make: *** [init/main.o] Error 2 Signed-off-by: -
Steven Rostedt authored
At OLS I had a lot of interest to be able to have the ftrace buffers dumped on panic. Usually one would expect to uses kexec and examine the buffers after a new kernel is loaded. But sometimes the resources do not permit kdump and kexec, so having an option to still see the sequence of events up to the crash is very advantageous. This patch adds the option to have the ftrace buffers dumped to the console in the latency_trace format on a panic. When the option is set, the default entries per CPU buffer are lowered to 16384, since the writing to the serial (if that is the console) may take an awful long time otherwise. [ Changes since -v1: Got alpine to send correctly (as well as spell check working). Removed config option. Moved the static variables into ftrace_dump itself. Gave printk a log level. ] Signed-off-by:
-
Steven Rostedt authored
Based on Randy Dunlap's suggestion, the ftrace_printk kernel-doc belongs with the ftrace_printk macro that should be used. Not with the __ftrace_printk internal function. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Steven Rostedt authored
This patch adds a feature that can help kernel developers debug their code using ftrace. int ftrace_printk(const char *fmt, ...); This records into the ftrace buffer using printf formatting. The entry size in the buffers are still a fixed length. A new type has been added that allows for more entries to be used for a single recording. The start of the print is still the same as the other entries. It returns the number of characters written to the ftrace buffer. For example: Having a module with the following code: static int __init ftrace_print_test(void) { ftrace_printk("jiffies are %ld\n", jiffies); return 0; } Gives me: insmod-5441 3...1 7569us : ftrace_print_test: jiffies are 4296626666 for the latency_trace file and: insmod-5441 [03] 1959.370498: ftrace_print_test jiffies are 4296626666 for the trace file. Note: Only the infrastructure should go into the kernel. It is to help facilitate debugging for other kernel developers. Calls to ftrace_printk is not intended to be left in the kernel, and should be frowned upon just like scattering printks around in the code. But having this easily at your fingertips helps the debugging go faster and bugs be solved quicker. Maybe later on, we can hook this with markers and have their printf format be sucked into ftrace output. Signed-off-by: -
Steven Rostedt authored
Some tracers will need to work with more than one entry. In order to do this the trace_entry structure was split into two fields. One for the start of all entries, and one to continue an existing entry. The trace_entry structure now has a "field" entry that consists of the previous content of the trace_entry, and a "cont" entry that is just a string buffer the size of the "field" entry. Thanks to Andrew Morton for suggesting this idea. Signed-off-by:
-
Steven Rostedt authored
When a mcount pointer is recorded into a table, it is used to add or remove calls to mcount (replacing them with nops). If the code is removed via removing a module, the pointers still exist. At modifying the code a check is always made to make sure the code being replaced is the code expected. In-other-words, the code being replaced is compared to what it is expected to be before being replaced. There is a very small chance that the code being replaced just happens to look like code that calls mcount (very small since the call to mcount is relative). To remove this chance, this patch adds ftrace_release to allow module unloading to remove the pointers to mcount within the module. Another change for init calls is made to not trace calls marked with __init. The tracing can not be started until after init is done anyway. Signed-off-by:
-
Steven Rostedt authored
The notrace define belongs in compiler.h so that it can be used in init.h Signed-off-by:
-
Steven Rostedt authored
Seems that freed records can appear in the available_filter_functions list. This patch fixes that. Signed-off-by:
-
Steven Rostedt authored
Mathieu Desnoyers revealed a bug in the original code. The nop that is used to relpace the mcount caller can be a two part nop. This runs the risk where a process can be preempted after executing the first nop, but before the second part of the nop. The ftrace code calls kstop_machine to keep multiple CPUs from executing code that is being modified, but it does not protect against a task preempting in the middle of a two part nop. If the above preemption happens and the tracer is enabled, after the kstop_machine runs, all those nops will be calls to the trace function. If the preempted process that was preempted between the two nops is executed again, it will execute half of the call to the trace function, and this might crash the system. This patch instead uses what both the latest Intel and AMD spec suggests. That is the P6_NOP5 sequence of "0x0f 0x1f 0x44 0x00 0x00". Note, some older CPUs and QEMU might fault on this nop, so this nop is executed with fault handling first. If it detects a fault, it will then use the code "0x66 0x66 0x66 0x66 0x90". If that faults, it will then default to a simple "jmp 1f; .byte 0x00 0x00 0x00; 1:". The jmp is not optimal but will do if the first two can not be executed. TODO: Examine the cpuid to determine the nop to use. Signed-off-by:
-
Steven Rostedt authored
x86 now sets up the mcount locations through the build and no longer needs to record the ip when the function is executed. This patch changes the initial mcount to simply return. There's no need to do any other work. If the ftrace start up test fails, the original mcount will be what everything will use, so having this as fast as possible is a good thing. Signed-off-by:
-
Steven Rostedt authored
Enable the use of the __mcount_loc infrastructure on x86_64 and i386. Signed-off-by:
-
Steven Rostedt authored
When enabling or disabling CONFIG_FTRACE_MCOUNT_RECORD, we want a full kernel compile to handle the adding of the __mcount_loc sections. Signed-off-by:
-
Steven Rostedt authored
This patch enables the loading of the __mcount_section of modules and changing all the callers of mcount into nops. The modification is done before the init_module function is called, so again, we do not need to use kstop_machine to make these changes. Signed-off-by:
-
Steven Rostedt authored
This is the infrastructure to the converting the mcount call sites recorded by the __mcount_loc section into nops on boot. It also allows for using these sites to enable tracing as normal. When the __mcount_loc section is used, the "ftraced" kernel thread is disabled. This uses the current infrastructure to record the mcount call sites as well as convert them to nops. The mcount function is kept as a stub on boot up and not converted to the ftrace_record_ip function. We use the ftrace_record_ip to only record from the table. This patch does not handle modules. That comes with a later patch. Signed-off-by:
-
Steven Rostedt authored
This patch creates a section in the kernel called "__mcount_loc". This will hold a list of pointers to the mcount relocation for each call site of mcount. For example: objdump -dr init/main.o [...] Disassembly of section .text: 0000000000000000 <do_one_initcall>: 0: 55 push %rbp [...] 000000000000017b <init_post>: 17b: 55 push %rbp 17c: 48 89 e5 mov %rsp,%rbp 17f: 53 push %rbx 180: 48 83 ec 08 sub $0x8,%rsp 184: e8 00 00 00 00 callq 189 <init_post+0xe> 185: R_X86_64_PC32 mcount+0xfffffffffffffffc [...] We will add a section to point to each function call. .section __mcount_loc,"a",@progbits [...] .quad .text + 0x185 [...] The offset to of the mcount call site in init_post is an offset from the start of the section, and not the start of the function init_post. The mcount relocation is at the call site 0x185 from the start of the .text section. .text + 0x185 == init_post + 0xa We need a way to add this __mcount_loc section in a way that we do not lose the relocations after final link. The .text section here will be attached to all other .text sections after final link and the offsets will be meaningless. We need to keep track of where these .text sections are. To do this, we use the start of the first function in the section. do_one_initcall. We can make a tmp.s file with this function as a reference to the start of the .text section. .section __mcount_loc,"a",@progbits [...] .quad do_one_initcall + 0x185 [...] Then we can compile the tmp.s into a tmp.o gcc -c tmp.s -o tmp.o And link it into back into main.o. ld -r main.o tmp.o -o tmp_main.o mv tmp_main.o main.o But we have a problem. What happens if the first function in a section is not exported, and is a static function. The linker will not let the tmp.o use it. This case exists in main.o as well. Disassembly of section .init.text: 0000000000000000 <set_reset_devices>: 0: 55 push %rbp 1: 48 89 e5 mov %rsp,%rbp 4: e8 00 00 00 00 callq 9 <set_reset_devices+0x9> 5: R_X86_64_PC32 mcount+0xfffffffffffffffc The first function in .init.text is a static function. 00000000000000a8 t __setup_set_reset_devices 000000000000105f t __setup_str_set_reset_devices 0000000000000000 t set_reset_devices The lowercase 't' means that set_reset_devices is local and is not exported. If we simply try to link the tmp.o with the set_reset_devices we end up with two symbols: one local and one global. .section __mcount_loc,"a",@progbits .quad set_reset_devices + 0x10 00000000000000a8 t __setup_set_reset_devices 000000000000105f t __setup_str_set_reset_devices 0000000000000000 t set_reset_devices U set_reset_devices We still have an undefined reference to set_reset_devices, and if we try to compile the kernel, we will end up with an undefined reference to set_reset_devices, or even worst, it could be exported someplace else, and then we will have a reference to the wrong location. To handle this case, we make an intermediate step using objcopy. We convert set_reset_devices into a global exported symbol before linking it with tmp.o and set it back afterwards. 00000000000000a8 t __setup_set_reset_devices 000000000000105f t __setup_str_set_reset_devices 0000000000000000 T set_reset_devices 00000000000000a8 t __setup_set_reset_devices 000000000000105f t __setup_str_set_reset_devices 0000000000000000 T set_reset_devices 00000000000000a8 t __setup_set_reset_devices 000000000000105f t __setup_str_set_reset_devices 0000000000000000 t set_reset_devices Now we have a section in main.o called __mcount_loc that we can place somewhere in the kernel using vmlinux.ld.S and access it to convert all these locations that call mcount into nops before starting SMP and thus, eliminating the need to do this with kstop_machine. Note, A well documented perl script (scripts/recordmcount.pl) is used to do all this in one location. Signed-off-by: -
Ingo Molnar authored
it can be called in the NMI path: [ 0.645999] calling ftrace_dynamic_init+0x0/0xd6 [ 0.647521] ------------[ cut here ]------------ [ 0.647521] WARNING: at kernel/trace/ftrace.c:348 ftrace_record_ip+0x4e/0x252() [ 0.647521] Modules linked in: [ 0.647521] Pid: 15, comm: kstop1 Not tainted 2.6.27-rc1-tip #22686 [ 0.647521] [ 0.647521] Call Trace: [ 0.647521] <NMI> [<ffffffff8024593f>] warn_on_slowpath+0x5d/0x84 [ 0.647521] [<ffffffff80220b99>] ? lapic_wd_event+0xb/0x5c [ 0.647521] [<ffffffff80287b3b>] ftrace_record_ip+0x4e/0x252 [ 0.647521] [<ffffffff80211274>] mcount_call+0x5/0x31 [ 0.647521] [<ffffffff80220b9e>] ? lapic_wd_event+0x10/0x5c [ 0.647521] [<ffffffff8083f3ec>] nmi_watchdog_tick+0x19d/0x1ad [ 0.647521] [<ffffffff8083e875>] default_do_nmi+0x75/0x1e3 [ 0.647521] [<ffffffff8083f0b3>] do_nmi+0x5d/0x94 [ 0.647521] [<ffffffff8083e2d2>] nmi+0xa2/0xc2 [ 0.647521] [<ffffffff802b48c3>] ? check_bytes_and_report+0x11/0xcc [ 0.647521] <<EOE>> [<ffffffff80211274>] ? mcount_call+0x5/0x31 [ 0.647521] [<ffffffff802b49df>] check_object+0x61/0x1b0 [ 0.647521] [<ffffffff802b502a>] __slab_free+0x169/0x2ae [ 0.647521] [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff80242dbf>] ? __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff802b60cd>] kmem_cache_free+0x85/0xb9 [ 0.647521] [<ffffffff80242dbf>] __cleanup_sighand+0x25/0x27 [ 0.647521] [<ffffffff80247b3d>] release_task+0x256/0x339 [ 0.647521] [<ffffffff802490b4>] do_exit+0x764/0x7ef [ 0.647521] [<ffffffff8027624c>] __xchg+0x0/0x38 [ 0.647521] [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2 [ 0.647521] [<ffffffff8027619a>] ? stop_cpu+0x0/0xb2 [ 0.647521] [<ffffffff8025922f>] kthread+0x4e/0x7b [ 0.647521] [<ffffffff80212979>] child_rip+0xa/0x11 [ 0.647521] [<ffffffff80211c17>] ? restore_args+0x0/0x30 [ 0.647521] [<ffffffff802283a5>] ? native_load_tls+0x14/0x2e [ 0.647521] [<ffffffff802591e1>] ? kthread+0x0/0x7b [ 0.647521] [<ffffffff8021296f>] ? child_rip+0x0/0x11 [ 0.647521] [ 0.647521] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.672032] initcall ftrace_dynamic_init+0x0/0xd6 returned 0 after 19 msecs also mark it no-kprobes while at it. Signed-off-by: -
Ingo Molnar authored
kprobes already has an extensive list of annotations for functions that should not be instrumented. Add notrace annotations to these functions as well. This is particularly useful for functions called by the NMI path. Signed-off-by: -
Mathieu Desnoyers authored
Steven Rostedt suggested: | Wouldn't it look nicer to have: (TRACEPOINT_TABLE_SIZE - 1) ? Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
