- 30 Jan, 2017 1 commit
-
-
Alexander Duyck authored
BugLink: http://bugs.launchpad.net/bugs/1658491 When I was adding the code for enabling VLAN promiscuous mode with SR-IOV enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has assumed there was code in another path that was setting it when we enabled SR-IOV. This wasn't the case and as a result we were just disabling VLAN filtering for all the VFs apparently. Also the previous patches were always clearing CFIEN which was always set to 0 by the hardware anyway so I am dropping the redundant bit clearing. Fixes: 16369564 ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> (cherry-picked from commit f60439bc) Fixes: 6c39aa93 ("ixgbe: Add support for VLAN promiscuous with SR-IOV") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Acked-by:
Tim Gardner <tim.gardner@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
- 26 Jan, 2017 23 commits
-
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 There have been several reports about pre-mature OOM killer invocation in 4.7 kernel when order-2 allocation request (for the kernel stack) invoked OOM killer even during basic workloads (light IO or even kernel compile on some filesystems). In all reported cases the memory is fragmented and there are no order-2+ pages available. There is usually a large amount of slab memory (usually dentries/inodes) and further debugging has shown that there are way too many unmovable blocks which are skipped during the compaction. Multiple reporters have confirmed that the current linux-next which includes [1] and [2] helped and OOMs are not reproducible anymore. A simpler fix for the late rc and stable is to simply ignore the compaction feedback and retry as long as there is a reclaim progress and we are not getting OOM for order-0 pages. We already do that for CONFING_COMPACTION=n so let's reuse the same code when compaction is enabled as well. [1] http://lkml.kernel.org/r/20160810091226.6709-1-vbabka@suse.cz [2] http://lkml.kernel.org/r/f7a9ea9d-bb88-bfd6-e340-3a933559305a@suse.cz Fixes: 0a0337e0 ("mm, oom: rework oom detection") Link: http://lkml.kernel.org/r/20160823074339.GB23577@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Tested-by:
Olaf Hering <olaf@aepfle.de> Tested-by:
Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Ralf-Peter Rohbeck <Ralf-Peter.Rohbeck@quantum.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit 6b4e3181) Signed-off-by:
Brad Figg <brad.figg@canonical.com>
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 Joonsoo has reported that he is able to trigger OOM for !costly high order requests (heavy fork() workload close the OOM) with the new oom detection rework. This is because we rely only on should_reclaim_retry when the compaction is disabled and it only checks watermarks for the requested order and so we might trigger OOM when there is a lot of free memory. It is not very clear what are the usual workloads when the compaction is disabled. Relying on high order allocations heavily without any mechanism to create those orders except for unbound amount of reclaim is certainly not a good idea. To prevent from potential regressions let's help this configuration some. We have to sacrifice the determinsm though because there simply is none here possible. should_compact_retry implementation for !CONFIG_COMPACTION, which was empty so far, will do watermark check for order-0 on all eligible zones. This will cause retrying until either the reclaim cannot make any further progress or all the zones are depleted even for order-0 pages. This means that the number of retries is basically unbounded for !costly orders but that was the case before the rework as well so this shouldn't regress. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1463051677-29418-3-git-send-email-mhocko@kernel.orgReported-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 "mm: consider compaction feedback also for costly allocation" has removed the upper bound for the reclaim/compaction retries based on the number of reclaimed pages for costly orders. While this is desirable the patch did miss a mis interaction between reclaim, compaction and the retry logic. The direct reclaim tries to get zones over min watermark while compaction backs off and returns COMPACT_SKIPPED when all zones are below low watermark + 1<<order gap. If we are getting really close to OOM then __compaction_suitable can keep returning COMPACT_SKIPPED a high order request (e.g. hugetlb order-9) while the reclaim is not able to release enough pages to get us over low watermark. The reclaim is still able to make some progress (usually trashing over few remaining pages) so we are not able to break out from the loop. I have seen this happening with the same test described in "mm: consider compaction feedback also for costly allocation" on a swapless system. The original problem got resolved by "vmscan: consider classzone_idx in compaction_ready" but it shows how things might go wrong when we approach the oom event horizont. The reason why compaction requires being over low rather than min watermark is not clear to me. This check was there essentially since 56de7263 ("mm: compaction: direct compact when a high-order allocation fails"). It is clearly an implementation detail though and we shouldn't pull it into the generic retry logic while we should be able to cope with such eventuality. The only place in should_compact_retry where we retry without any upper bound is for compaction_withdrawn() case. Introduce compaction_zonelist_suitable function which checks the given zonelist and returns true only if there is at least one zone which would would unblock __compaction_suitable if more memory got reclaimed. In this implementation it checks __compaction_suitable with NR_FREE_PAGES plus part of the reclaimable memory as the target for the watermark check. The reclaimable memory is reduced linearly by the allocation order. The idea is that we do not want to reclaim all the remaining memory for a single allocation request just unblock __compaction_suitable which doesn't guarantee we will make a further progress. The new helper is then used if compaction_withdrawn() feedback was provided so we do not retry if there is no outlook for a further progress. !costly requests shouldn't be affected much - e.g. order-2 pages would require to have at least 64kB on the reclaimable LRUs while order-9 would need at least 32M which should be enough to not lock up. [vbabka@suse.cz: fix classzone_idx vs. high_zoneidx usage in compaction_zonelist_suitable] [akpm@linux-foundation.org: fix it for Mel's mm-page_alloc-remove-field-from-alloc_context.patch] Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 PAGE_ALLOC_COSTLY_ORDER retry logic is mostly handled inside should_reclaim_retry currently where we decide to not retry after at least order worth of pages were reclaimed or the watermark check for at least one zone would succeed after reclaiming all pages if the reclaim hasn't made any progress. Compaction feedback is mostly ignored and we just try to make sure that the compaction did at least something before giving up. The first condition was added by a41f24ea ("page allocator: smarter retry of costly-order allocations) and it assumed that lumpy reclaim could have created a page of the sufficient order. Lumpy reclaim, has been removed quite some time ago so the assumption doesn't hold anymore. Remove the check for the number of reclaimed pages and rely on the compaction feedback solely. should_reclaim_retry now only makes sure that we keep retrying reclaim for high order pages only if they are hidden by watermaks so order-0 reclaim makes really sense. should_compact_retry now keeps retrying even for the costly allocations. The number of retries is reduced wrt. !costly requests because they are less important and harder to grant and so their pressure shouldn't cause contention for other requests or cause an over reclaim. We also do not reset no_progress_loops for costly request to make sure we do not keep reclaiming too agressively. This has been tested by running a process which fragments memory: - compact memory - mmap large portion of the memory (1920M on 2GRAM machine with 2G of swapspace) - MADV_DONTNEED single page in PAGE_SIZE*((1UL<<MAX_ORDER)-1) steps until certain amount of memory is freed (250M in my test) and reduce the step to (step / 2) + 1 after reaching the end of the mapping - then run a script which populates the page cache 2G (MemTotal) from /dev/zero to a new file And then tries to allocate nr_hugepages=$(awk '/MemAvailable/{printf "%d\n", $2/(2*1024)}' /proc/meminfo) huge pages. root@test1:~# echo 1 > /proc/sys/vm/overcommit_memory;echo 1 > /proc/sys/vm/compact_memory; ./fragment-mem-and-run /root/alloc_hugepages.sh 1920M 250M Node 0, zone DMA 31 28 31 10 2 0 2 1 2 3 1 Node 0, zone DMA32 437 319 171 50 28 25 20 16 16 14 437 * This is the /proc/buddyinfo after the compaction Done fragmenting. size=2013265920 freed=262144000 Node 0, zone DMA 165 48 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 35109 14575 185 51 41 12 6 0 0 0 0 * /proc/buddyinfo after memory got fragmented Executing "/root/alloc_hugepages.sh" Eating some pagecache 508623+0 records in 508623+0 records out 2083319808 bytes (2.1 GB) copied, 11.7292 s, 178 MB/s Node 0, zone DMA 3 5 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 111 344 153 20 24 10 3 0 0 0 0 * /proc/buddyinfo after page cache got eaten Trying to allocate 129 129 * 129 hugepages requested and all of them granted. Node 0, zone DMA 3 5 3 1 2 0 2 2 2 2 0 Node 0, zone DMA32 127 97 30 99 11 6 2 1 4 0 0 * /proc/buddyinfo after hugetlb allocation. 10 runs will behave as follows: Trying to allocate 130 130 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 -- Trying to allocate 132 132 -- Trying to allocate 129 129 -- Trying to allocate 128 128 -- Trying to allocate 129 129 So basically 100% success for all 10 attempts. Without the patch numbers looked much worse: Trying to allocate 128 12 -- Trying to allocate 129 14 -- Trying to allocate 129 7 -- Trying to allocate 129 16 -- Trying to allocate 129 30 -- Trying to allocate 129 38 -- Trying to allocate 129 19 -- Trying to allocate 129 37 -- Trying to allocate 129 28 -- Trying to allocate 129 37 Just for completness the base kernel without oom detection rework looks as follows: Trying to allocate 127 30 -- Trying to allocate 129 12 -- Trying to allocate 129 52 -- Trying to allocate 128 32 -- Trying to allocate 129 12 -- Trying to allocate 129 10 -- Trying to allocate 129 32 -- Trying to allocate 128 14 -- Trying to allocate 128 16 -- Trying to allocate 129 8 As we can see the success rate is much more volatile and smaller without this patch. So the patch not only makes the retry logic for costly requests more sensible the success rate is even higher. Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 should_reclaim_retry will give up retries for higher order allocations if none of the eligible zones has any requested or higher order pages available even if we pass the watermak check for order-0. This is done because there is no guarantee that the reclaimable and currently free pages will form the required order. This can, however, lead to situations where the high-order request (e.g. order-2 required for the stack allocation during fork) will trigger OOM too early - e.g. after the first reclaim/compaction round. Such a system would have to be highly fragmented and there is no guarantee further reclaim/compaction attempts would help but at least make sure that the compaction was active before we go OOM and keep retrying even if should_reclaim_retry tells us to oom if - the last compaction round backed off or - we haven't completed at least MAX_COMPACT_RETRIES active compaction rounds. The first rule ensures that the very last attempt for compaction was not ignored while the second guarantees that the compaction has done some work. Multiple retries might be needed to prevent occasional pigggy backing of other contexts to steal the compacted pages before the current context manages to retry to allocate them. compaction_failed() is taken as a final word from the compaction that the retry doesn't make much sense. We have to be careful though because the first compaction round is MIGRATE_ASYNC which is rather weak as it ignores pages under writeback and gives up too easily in other situations. We therefore have to make sure that MIGRATE_SYNC_LIGHT mode has been used before we give up. With this logic in place we do not have to increase the migration mode unconditionally and rather do it only if the compaction failed for the weaker mode. A nice side effect is that the stronger migration mode is used only when really needed so this has a potential of smaller latencies in some cases. Please note that the compaction doesn't tell us much about how successful it was when returning compaction_made_progress so we just have to blindly trust that another retry is worthwhile and cap the number to something reasonable to guarantee a convergence. If the given number of successful retries is not sufficient for a reasonable workloads we should focus on the collected compaction tracepoints data and try to address the issue in the compaction code. If this is not feasible we can increase the retries limit. [mhocko@suse.com: fix warning] Link: http://lkml.kernel.org/r/20160512061636.GA4200@dhcp22.suse.czSigned-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 Compaction can provide a wild variation of feedback to the caller. Many of them are implementation specific and the caller of the compaction (especially the page allocator) shouldn't be bound to specifics of the current implementation. This patch abstracts the feedback into three basic types: - compaction_made_progress - compaction was active and made some progress. - compaction_failed - compaction failed and further attempts to invoke it would most probably fail and therefore it is not worth retrying - compaction_withdrawn - compaction wasn't invoked for an implementation specific reasons. In the current implementation it means that the compaction was deferred, contended or the page scanners met too early without any progress. Retrying is still worthwhile. [vbabka@suse.cz: do not change thp back off behavior] [akpm@linux-foundation.org: fix typo in comment, per Hillf] Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 COMPACT_COMPLETE now means that compaction and free scanner met. This is not very useful information if somebody just wants to use this feedback and make any decisions based on that. The current caller might be a poor guy who just happened to scan tiny portion of the zone and that could be the reason no suitable pages were compacted. Make sure we distinguish the full and partial zone walks. Consumers should treat COMPACT_PARTIAL_SKIPPED as a potential success and be optimistic in retrying. The existing users of COMPACT_COMPLETE are conservatively changed to use COMPACT_PARTIAL_SKIPPED as well but some of them should be probably reconsidered and only defer the compaction only for COMPACT_COMPLETE with the new semantic. This patch shouldn't introduce any functional changes. Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 __alloc_pages_direct_compact communicates potential back off by two variables: - deferred_compaction tells that the compaction returned COMPACT_DEFERRED - contended_compaction is set when there is a contention on zone->lock resp. zone->lru_lock locks __alloc_pages_slowpath then backs of for THP allocation requests to prevent from long stalls. This is rather messy and it would be much cleaner to return a single compact result value and hide all the nasty details into __alloc_pages_direct_compact. This patch shouldn't introduce any functional changes. Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 try_to_compact_pages() can currently return COMPACT_SKIPPED even when the compaction is defered for some zone just because zone DMA is skipped in 99% of cases due to watermark checks. This makes COMPACT_DEFERRED basically unusable for the page allocator as a feedback mechanism. Make sure we distinguish those two states properly and switch their ordering in the enum. This would mean that the COMPACT_SKIPPED will be returned only when all eligible zones are skipped. As a result COMPACT_DEFERRED handling for THP in __alloc_pages_slowpath will be more precise and we would bail out rather than reclaim. Signed-off-by:
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1655842 Compaction code is doing weird dances between COMPACT_FOO -> int -> unsigned long But there doesn't seem to be any reason for that. All functions which return/use one of those constants are not expecting any other value so it really makes sense to define an enum for them and make it clear that no other values are expected. This is a pure cleanup and shouldn't introduce any functional changes. Signed-off-by:
-
Mel Gorman authored
BugLink: https://bugs.launchpad.net/bugs/1655842 alloc_flags is a bitmask of flags but it is signed which does not necessarily generate the best code depending on the compiler. Even without an impact, it makes more sense that this be unsigned. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1657194 If srp_transfer_data fails within ibmvscsis_write_pending, then the most likely scenario is that the client timed out the op and removed the TCE mapping. Thus it will loop forever retrying the op that is pretty much guaranteed to fail forever. A better return code would be EIO instead of EAGAIN. Cc: stable@vger.kernel.org Reported-by:
Steven Royer <seroyer@linux.vnet.ibm.com> Tested-by:
Bryant G. Ly <bgly@us.ibm.com> Signed-off-by:
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1657194 Currently, dma_alloc_coherent is being called with a GFP_KERNEL flag which allows it to sleep in an interrupt context, need to change to GFP_ATOMIC. Cc: stable@vger.kernel.org Tested-by:
Michael Cyr <mikecyr@linux.vnet.ibm.com> Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
-
Bryant G. Ly authored
BugLink: http://bugs.launchpad.net/bugs/1657194 Current code incorrectly calculates the max transfer length, since it is assuming a 4k page table, but ppc64 all run on 64k page tables. Cc: stable@vger.kernel.org Reported-by:
-
Guilherme G. Piccoli authored
BugLink: http://bugs.launchpad.net/bugs/1656913 Commit 54adc010 ("nvme/quirk: Add a delay before checking for adapter readiness") introduced a quirk to adapters that cannot read the bit NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters need a delay or else the action of reading the bit NVME_CSTS_RDY could somehow corrupt adapter's registers state and it never recovers. When this quirk was added, we checked ctrl->tagset in order to avoid quirking in probe time, supposing we would never require such delay during probe. Well, it was too optimistic; we in fact need this quirk at probe time in some cases, like after a kexec. In some experiments, after abnormal shutdown of machine (aka power cord unplug), we booted into our bootloader in Power, which is a Linux kernel, and kexec'ed into another distro. If this kexec is too quick, we end up reaching the probe of NVMe adapter in that distro when adapter is in bad state (not fully initialized on our bootloader). What happens next is that nvme_wait_ready() is unable to complete, except if the quirk is enabled. So, this patch removes the original ctrl->tagset verification in order to enable the quirk even on probe time. Fixes: 54adc010 ("nvme/quirk: Add a delay before checking for adapter readiness") Reported-by:
Andrew Byrne <byrneadw@ie.ibm.com> Reported-by:
Jaime A. H. Gomez <jahgomez@mx1.ibm.com> Reported-by:
Zachary D. Myers <zdmyers@us.ibm.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Jeffrey Lien <Jeff.Lien@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> (cherry picked from commit b5a10c5f) Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Acked-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 pci_update_resource() updates a hardware BAR so its address matches the kernel's struct resource UNLESS it's a disabled ROM BAR. We only update those when we enable the ROM. It's not obvious from the code why ROM BARs should be handled specially. Apparently there are Matrox devices with defective ROM BARs that read as zero when disabled. That means that if pci_enable_rom() reads the disabled BAR, sets PCI_ROM_ADDRESS_ENABLE (without re-inserting the address), and writes it back, it would enable the ROM at address zero. Add comments and references to explain why we can't make the code look more rational. The code changes are from 755528c8 ("Ignore disabled ROM resources at setup") and 8085ce08 ("[PATCH] Fix PCI ROM mapping"). Link: https://lkml.org/lkml/2005/8/30/138Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> (back ported from commit 0b457dde) Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 Remove the assumption that IORESOURCE_ROM_ENABLE == PCI_ROM_ADDRESS_ENABLE. PCI_ROM_ADDRESS_ENABLE is the ROM enable bit defined by the PCI spec, so if we're reading or writing a BAR register value, that's what we should use. IORESOURCE_ROM_ENABLE is a corresponding bit in struct resource flags. Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 If we update a VF BAR while it's enabled, there are two potential problems: 1) Any driver that's using the VF has a cached BAR value that is stale after the update, and 2) We can't update 64-bit BARs atomically, so the intermediate state (new lower dword with old upper dword) may conflict with another device, and an access by a driver unrelated to the VF may cause a bus error. Warn about attempts to update VF BARs while they are enabled. This is a programming error, so use dev_WARN() to get a backtrace. Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 The BAR property bits (0-3 for memory BARs, 0-1 for I/O BARs) are supposed to be read-only, but we do save them in res->flags and include them when updating the BAR. Mask the I/O property bits with ~PCI_BASE_ADDRESS_IO_MASK (0x3) instead of PCI_REGION_FLAG_MASK (0xf) to make it obvious that we can't corrupt bits 2-3 of I/O addresses. Use PCI_ROM_ADDRESS_MASK for ROM BARs. This means we'll only check the top 21 bits (instead of the 28 bits we used to check) of a ROM BAR to see if the update was successful. Signed-off-by:
-
Bjorn Helgaas authored
BugLink: http://bugs.launchpad.net/bugs/1625318 VF BARs are read-only zero, so updating VF BARs will not have any effect. See the SR-IOV spec r1.1, sec 3.4.1.11. We already ignore these updates because of 70675e0b ("PCI: Don't try to restore VF BARs"); this merely restructures it slightly to make it easier to split updates for standard and SR-IOV BARs. Signed-off-by:
-
Gavin Shan authored
BugLink: http://bugs.launchpad.net/bugs/1625318 Previously we enabled VFs and enable their memory space before calling pcibios_sriov_enable(). But pcibios_sriov_enable() may update the VF BARs: for example, on PPC PowerNV we may change them to manage the association of VFs to PEs. Because 64-bit BARs cannot be updated atomically, it's unsafe to update them while they're enabled. The half-updated state may conflict with other devices in the system. Call pcibios_sriov_enable() before enabling the VFs so any BAR updates happen while the VF BARs are disabled. [bhelgaas: changelog] Tested-by:
Carol Soto <clsoto@us.ibm.com> Signed-off-by:
-
- 25 Jan, 2017 3 commits
-
-
Joerg Roedel authored
BugLink: http://bugs.launchpad.net/bugs/1649718 Using the vector stored at interrupt delivery makes the eoi matching safe agains irq migration in the ioapic. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 4d99ba89) Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Joerg Roedel authored
BugLink: http://bugs.launchpad.net/bugs/1649718 This allows backtracking later in case the rtc irq has been moved to another vcpu/vector. Signed-off-by:
-
Joerg Roedel authored
BugLink: http://bugs.launchpad.net/bugs/1649718 Currently this is a bitmap which tracks which CPUs we expect an EOI from. Move this bitmap to a struct so that we can track additional information there. Signed-off-by:
-
- 20 Jan, 2017 13 commits
-
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1658091Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Niklas Söderlund authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit 5d7400c4 upstream. Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if the operation get_bias() is implemented but the pin is not handled by the get_bias() implementation. In that case the output will state that "input bias disabled" indicating that this pin has bias control support. Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also solves the issue where SoC specific implementations print error messages if their particular implementation of {set,get}_bias() is called with a pin it does not know about. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit fe0f3168 upstream. Make sure to drop any reference taken by bus_find_device() in the sysfs callbacks that are used to create and destroy devices based on device-tree entries. Fixes: 6bccf755 ("[POWERPC] ibmebus: dynamic addition/removal of adapters, some code cleanup") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit 815a7141 upstream. Make sure to drop any reference taken by bus_find_device() when creating devices during init and driver registration. Fixes: 55347cc9 ("[POWERPC] ibmebus: Add device creation and bus probing based on of_device") Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit c090959b upstream. Make sure to drop the reference to the parent device taken by class_find_device() after populating the bus. Fixes: 3b9334ac ("mfd: vexpress: Convert custom func API to regmap") Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gabriel Krisman Bertazi authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit c02ebfdd upstream. Commit 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") attempts to avoid triggering the WARN_ON in __blk_mq_run_hw_queue when the expected CPU is dead. Problem is, in the last batch execution before round robin, blk_mq_hctx_next_cpu can schedule a dead CPU and also update next_cpu to the next alive CPU in the mask, which will trigger the WARN_ON despite the previous workaround. The following patch fixes this scenario by always scheduling the value in hctx->next_cpu. This changes the moment when we round-robin the CPU running the hctx, but it really doesn't matter, since it still executes BLK_MQ_CPU_WORK_BATCH times in a row before switching to another CPU. Fixes: 0e87e58b ("blk-mq: improve warning for running a queue on the wrong CPU") Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Prarit Bhargava authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit a545715d upstream. When removing and adding cpu 0 on a system with GHES NMI the following stack trace is seen when re-adding the cpu: WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+ Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6+ #2 Call Trace: dump_stack+0x63/0x8e __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 setup_local_APIC+0x275/0x370 apic_ap_setup+0xe/0x20 start_secondary+0x48/0x180 set_init_arg+0x55/0x55 early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x13d/0x14c During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms that something has set the IRQ_WORK_VECTOR line prior to the APIC being initialized. Commit 2383844d ("GHES: Elliminate double-loop in the NMI handler") incorrectly modified the behavior such that the handler returns NMI_HANDLED only if an error was processed, and incorrectly runs the ghes work queue for every NMI. This patch modifies the ghes_proc_irq_work() to run as it did prior to 2383844d ("GHES: Elliminate double-loop in the NMI handler") by properly returning NMI_HANDLED and only calling the work queue if NMI_HANDLED has been set. Fixes: 2383844d (GHES: Elliminate double-loop in the NMI handler) Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Tejun Heo authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit ebc4ff66 upstream. cfq_cpd_alloc() which is the cpd_alloc_fn implementation for cfq was incorrectly hard coding GFP_KERNEL instead of using the mask specified through the @gfp parameter. This currently doesn't cause any actual issues because all current callers specify GFP_KERNEL. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: e4a9bde9 ("blkcg: replace blkcg_policy->cpd_size with ->cpd_alloc/free_fn() methods") Signed-off-by:
-
Denis Kirjanov authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit 8a10c06a upstream. With preemption turned on we can read incorrect throttling state while being switched to CPU on a different chip. BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343 caller is .powernv_cpufreq_throttle_check+0x2c/0x710 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1 Call Trace: [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable) [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc Fixes: 09a972d1 (cpufreq: powernv: Report cpu frequency throttling) Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
NeilBrown authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit cfd278c2 upstream. Various places assume that if nfs4_fl_prepare_ds() turns a non-NULL 'ds', then ds->ds_clp will also be non-NULL. This is not necessasrily true in the case when the process received a fatal signal while nfs4_pnfs_ds_connect is waiting in nfs4_wait_ds_connect(). In that case ->ds_clp may not be set, and the devid may not recently have been marked unavailable. So add a test for ds_clp == NULL and return NULL in that case. Fixes: c23266d5 ("NFS4.1 Fix data server connection race") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Olga Kornievskaia <aglo@umich.edu> Acked-by:
Adamson, Andy <William.Adamson@netapp.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit 79f687a3 upstream. Ben Coddington reports that commit 311324ad, by adding the function nfs_dir_mapping_need_revalidate() that checks page cache validity on each call to nfs_readdir() causes a performance regression when the directory is being modified. If the directory is changing while we're iterating through the directory, POSIX does not require us to invalidate the page cache unless the user calls rewinddir(). However, we still do want to ensure that we use readdirplus in order to avoid a load of stat() calls when the user is doing an 'ls -l' workload. The fix should be to invalidate the page cache immediately when we're setting the NFS_INO_ADVISE_RDPLUS bit. Reported-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 311324ad ("NFS: Be more aggressive in using readdirplus...") Reviewed-by:
-
Trond Myklebust authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit ee284e35 upstream. We must put the task to sleep while holding the inode->i_lock in order to ensure atomicity with the test for NFS_LAYOUT_RETURN. Fixes: 500d701f ("NFS41: make close wait for layoutreturn") Signed-off-by:
-
Neil Armstrong authored
BugLink: http://bugs.launchpad.net/bugs/1658091 commit f24d311f upstream. The pinctrl_gpio_request is called with the "full" gpio number, already containing the base, then meson_pmx_request_gpio is then called with the final pin number. Remove the base addition when calling meson_pmx_disable_other_groups. Fixes: 6ac73095 ("pinctrl: add driver for Amlogic Meson SoCs") CC: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Kevin Hilman <khilman@baylibre.com> Acked-by:
Beniamino Galvani <b.galvani@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
