Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add __ioemm attribute to reg_rng to fix the following
sparse warnings:

drivers/char/hw_random/ks-sa-rng.c:102:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:102:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:102:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:104:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:104:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:104:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:113:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:113:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:113:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:116:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:116:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:116:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:119:17: warning: incorrect type in argument 1 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:119:17:    expected void const volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:119:17:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:121:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:121:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:121:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:132:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:132:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:132:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:143:19: warning: incorrect type in argument 1 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:143:19:    expected void const volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:143:19:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:144:19: warning: incorrect type in argument 1 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:144:19:    expected void const volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:144:19:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:146:9: warning: incorrect type in argument 2 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:146:9:    expected void volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:146:9:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:160:25: warning: incorrect type in argument 1 (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:160:25:    expected void const volatile [noderef] <asn:2> *addr
drivers/char/hw_random/ks-sa-rng.c:160:25:    got unsigned int *
drivers/char/hw_random/ks-sa-rng.c:194:28: warning: incorrect type in assignment (different address spaces)
drivers/char/hw_random/ks-sa-rng.c:194:28:    expected struct trng_regs *reg_rng
drivers/char/hw_random/ks-sa-rng.c:194:28:    got void [noderef] <asn:2> *
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the logic to deal with input sizes that are not a round multiple
of the AES block size, as described by the XTS spec. This brings the
SPE implementation in line with other kernel drivers that have been
updated recently to take this into account.

Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the PowerPC SPE implementations of AES-ECB,
AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the
"skcipher" API.  This is needed in order for the blkcipher API to be
removed.

Tested with:

	export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
	make mpc85xx_defconfig
	cat >> .config << EOF
	# CONFIG_MODULES is not set
	# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
	CONFIG_DEBUG_KERNEL=y
	CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
	CONFIG_CRYPTO_AES=y
	CONFIG_CRYPTO_CBC=y
	CONFIG_CRYPTO_CTR=y
	CONFIG_CRYPTO_ECB=y
	CONFIG_CRYPTO_XTS=y
	CONFIG_CRYPTO_AES_PPC_SPE=y
	EOF
	make olddefconfig
	make -j32
	qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
		-kernel arch/powerpc/boot/zImage \
		-append cryptomgr.fuzz_iterations=1000

Note that xts-ppc-spe still fails the comparison tests due to the lack
of ciphertext stealing support.  This is not addressed by this patch.

This patch also cleans up the code by making ->encrypt() and ->decrypt()
call a common function for each of ECB, CBC, and XTS, and by using a
clearer way to compute the length to process at each step.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set the ivsize for the "ecb-ppc-spe" algorithm to 0, since ECB mode
doesn't take an IV.

This fixes a failure in the extra crypto self-tests:

	alg: skcipher: ivsize for ecb-ppc-spe (16) doesn't match generic impl (0)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The PowerPC SPE implementations of AES modes only disable preemption
during the actual encryption/decryption, not during the scatterwalk
functions.  It's therefore unnecessary to request an atomic scatterwalk.
So don't do so.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to speed up aegis128 processing even more, duplicate the init()
and final() routines as SIMD versions in their entirety. This results
in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES
instructions).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of passing around an ops structure with function pointers,
which forces indirect calls to be used, refactor the code slightly
so we can use ordinary function calls. At the same time, switch to
a static key to decide whether or not the SIMD code path may be used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG
data rate which takes approx. 700us to produce 16 bytes of output data
as per testing results. So configure the timeout as 1000us to also take
account of lack of udelay()'s reliability.

Fixes: 38321242 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

safexcel_pci_remove() is only used locally in the module and not exported,
so added a static function specifier.
This fixes a sparse issue reported by Ben Dooks.

Fixes: 625f269a ("crypto: inside-secure - add support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Always take the zero length hash value for SM3 from the local constant
to avoid a reported build error when SM3 is configured to be a module.

Fixes: 0f2bc131 ("crypto: inside-secure - Added support for...")
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Arguments are supposed to be ordered high then low.

Fixes: c8b4b477 ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit daae28de has moved add_early_randomness() out of the
rng_mutex and tries to protect the reference of the new rng device
by incrementing the reference counter.

But in hwrng_register(), the function can be called with a new device
that is not set as the current_rng device and the reference has not been
initialized. This patch fixes the problem by not using the reference
counter when the device is not the current one: the reference counter
is only meaningful in the case of the current rng device and a device
is not used if it is not the current one (except in hwrng_register())

The problem has been reported by Marek Szyprowski on ARM 32bit
Exynos5420-based Chromebook Peach-Pit board:

WARNING: CPU: 3 PID: 1 at lib/refcount.c:156 hwrng_register+0x13c/0x1b4
refcount_t: increment on 0; use-after-free.
Modules linked in:
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00061-gdaae28de
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01124c8>] (unwind_backtrace) from [<c010dfb8>] (show_stack+0x10/0x14)
[<c010dfb8>] (show_stack) from [<c0ae86d8>] (dump_stack+0xa8/0xd4)
[<c0ae86d8>] (dump_stack) from [<c0127428>] (__warn+0xf4/0x10c)
[<c0127428>] (__warn) from [<c01274b4>] (warn_slowpath_fmt+0x74/0xb8)
[<c01274b4>] (warn_slowpath_fmt) from [<c054729c>] (hwrng_register+0x13c/0x1b4)
[<c054729c>] (hwrng_register) from [<c0547e54>] (tpm_chip_register+0xc4/0x274)
...
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: daae28de ("hwrng: core - move add_early_randomness() out of rng_mutex")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-CTR from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the PowerPC Nest (NX) implementation of AES-ECB from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The NX crypto driver is using 'struct blkcipher_desc' to pass the IV
around, even for AEADs (for which it creates the struct on the stack).
This is not appropriate since this structure is part of the "blkcipher"
API, which is deprecated and will be removed.

Just pass around the IV directly instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the VIA PadLock implementations of AES-ECB and AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API.  This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF implementations of DES-ECB,
DES-CBC, DES-CTR, 3DES-ECB, 3DES-CBC, and 3DES-CTR from the deprecated
"blkcipher" API to the "skcipher" API.  This is needed in order for the
blkcipher API to be removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF protected key implementations
of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated
"blkcipher" API to the "skcipher" API.  This is needed in order for the
blkcipher API to be removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the S390 CPACF implementations of AES-ECB,
AES-CBC, AES-XTS, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API.  This is needed in order for the blkcipher API to be
removed.

Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 DES opcodes implementations of
DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher"
API to the "skcipher" API.  This is needed in order for the blkcipher
API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 Camellia opcodes implementations
of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to
the "skcipher" API.  This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the glue code for the SPARC64 AES opcodes implementations of
AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API.  This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A warning message reported by a static analysis tool:
  "
  Either the condition 'if(skb)' is redundant or there is possible null
  pointer dereference: skb.
  "

Remove the unused redundant check.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To avoid compile error in some platforms, select NEED_SG_DMA_LENGTH in
qm Kconfig.

Fixes: dfed0098 ("crypto: hisilicon - add hardware SGL support")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/ux500/hash/hash_core.c: In function hash_set_dma_transfer:
drivers/crypto/ux500/hash/hash_core.c:143:15: warning: variable cookie set but not used [-Wunused-but-set-variable]

It is not used since commit 8a63b199 ("crypto:
ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of allowing the Crypto Extensions algorithms to be selected when
using a toolchain that does not support them, and complain about it at
build time, use the information we have about the compiler to prevent
them from being selected in the first place. Users that are stuck with
a GCC version <4.8 are unlikely to care about these routines anyway, and
it cleans up the Makefile considerably.

While at it, add explicit 'armv8-a' CPU specifiers to the code that uses
the 'crypto-neon-fp-armv8' FPU specifier so we don't regress Clang, which
will complain about this in version 10 and later.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The geode AES driver is heavily broken because it stores per-request
state in the transform context.  So it will crash or produce the wrong
result if used by any of the many places in the kernel that issue
concurrent requests for the same transform object.

This driver is also implemented using the deprecated blkcipher API,
which makes it difficult to fix, and puts it among the drivers
preventing that API from being removed.

Convert this driver to use the skcipher API, and change it to not store
per-request state in the transform context.

Fixes: 9fe757b0 ("[PATCH] crypto: Add support for the Geode LX AES hardware")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add binding documentation for the True Random Number Generator
found on Samsung Exynos 5250+ SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Antoine Tenart <antoine.tenart@ack.tf>
Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the following build warnings by adding a header for
the definitions shared between jitterentropy.c and
jitterentropy-kcapi.c. Fixes the following:

crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static?
crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static?
crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static?
crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stephan Mueller <smueller@chronox.de
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>