1. 22 Jun, 2005 40 commits
    • Kumar Gala's avatar
      [PATCH] ppc32: Added support for new MPC8548 family of PowerQUICC III processors · 5b37b700
      Kumar Gala authored
      Added descriptions of the new MPC8548 family processors, e500 core and
      peripherals.
      Signed-off-by: default avatarKumar Gala <kumar.gala@freescale.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      5b37b700
    • Gerald Schaefer's avatar
      [PATCH] SELinux: memory leak in selinux_sb_copy_data() · da3caa20
      Gerald Schaefer authored
      There is a memory leak during mount when SELinux is active and mount
      options are specified.
      Signed-off-by: default avatarGerald Schaefer <geraldsc@de.ibm.com>
      Acked-by: default avatarStephen Smalley <sds@epoch.ncsc.mil>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      da3caa20
    • Gerald Schaefer's avatar
      [PATCH] VFS: memory leak in do_kern_mount() · 8680e22f
      Gerald Schaefer authored
      There is a memory leak during mount when CONFIG_SECURITY is enabled and
      mount options are specified.
      Signed-off-by: default avatarGerald Schaefer <geraldsc@de.ibm.com>
      Acked-by: default avatarJames Morris <jmorris@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      8680e22f
    • Coywolf Qi Hunt's avatar
      [PATCH] kbuild: display compile version · 2894801d
      Coywolf Qi Hunt authored
      I am always trying to make sure I've booted the right kernel after a new
      install.  Too paranoid maybe.  But I guess there're other people like me.
      So let's make kbuild display the compile version number at the end to give
      us a hint.  I know we may be booting vmlinux someday, but don't care about
      it for now.
      Signed-off-by: default avatarCoywolf Qi Hunt <coywolf@lovecn.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      2894801d
    • John W. Linville's avatar
      [PATCH] 3c59x: remove superfluous vortex_debug test from boomerang_start_xmit() · 0f667ff5
      John W. Linville authored
      Remove the superfluous test of "if (vortex_debug > 3)" inside the "if
      (vortex_debug > 6)" clause early in boomerang_start_xmit.
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      0f667ff5
    • Denis Vlasenko's avatar
      [PATCH] Kill stray newline · c0d62219
      Denis Vlasenko authored
      OOM killer prints a stray newline.
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c0d62219
    • Abhijit Karmarkar's avatar
      [PATCH] msync: check pte dirty earlier · b4955ce3
      Abhijit Karmarkar authored
      It's common practice to msync a large address range regularly, in which
      often only a few ptes have actually been dirtied since the previous pass.
      
      sync_pte_range then goes much faster if it tests whether pte is dirty
      before locating and accessing each struct page cacheline; and it is hardly
      slowed by ptep_clear_flush_dirty repeating that test in the opposite case,
      when every pte actually is dirty.
      
      But beware, s390's pte_dirty always says false, since its dirty bit is kept
      in the storage key, located via the struct page address.  So skip this
      optimization in its case: use a pte_maybe_dirty macro which just says true
      if page_test_and_clear_dirty is implemented.
      Signed-off-by: default avatarAbhijit Karmarkar <abhijitk@veritas.com>
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      b4955ce3
    • Hugh Dickins's avatar
      [PATCH] can_share_swap_page: use page_mapcount · c475a8ab
      Hugh Dickins authored
      Remember that ironic get_user_pages race?  when the raised page_count on a
      page swapped out led do_wp_page to decide that it had to copy on write, so
      substituted a different page into userspace.  2.6.7 onwards have Andrea's
      solution, where try_to_unmap_one backs out if it finds page_count raised.
      
      Which works, but is unsatisfying (rmap.c has no other page_count heuristics),
      and was found a few months ago to hang an intensive page migration test.  A
      year ago I was hesitant to engage page_mapcount, now it seems the right fix.
      
      So remove the page_count hack from try_to_unmap_one; and use activate_page in
      unuse_mm when dropping lock, to replace its secondary effect of helping
      swapoff to make progress in that case.
      
      Simplify can_share_swap_page (now called only on anonymous pages) to check
      page_mapcount + page_swapcount == 1: still needs the page lock to stabilize
      their (pessimistic) sum, but does not need swapper_space.tree_lock for that.
      
      In do_swap_page, move swap_free and unlock_page below page_add_anon_rmap, to
      keep sum on the high side, and correct when can_share_swap_page called.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c475a8ab
    • Hugh Dickins's avatar
      [PATCH] do_wp_page: cannot share file page · d296e9cd
      Hugh Dickins authored
      A small optimization to do_wp_page's check for whether to avoid copy by
      reusing the page already mapped.  It can never share a cached file page,
      nor can it share a reserved page (often the empty zero page), so it's a
      waste of time to lock and unlock in those cases.  Which nowadays can both
      be neatly excluded by a preliminary PageAnon test.
      
      Christoph has reported that a preliminary page_count test proved valuable
      for scalability here, but PageAnon covers more common cases all at once.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      d296e9cd
    • Hugh Dickins's avatar
      [PATCH] get_user_pages: kill get_page_map · 08ef4729
      Hugh Dickins authored
      Since its birth, get_user_pages has been calling a misguided get_page_map
      function.  follow_page has already returned NULL if the pfn is invalid, we
      cannot reach an invalid pfn from a validated struct page.
      
      Remove get_page_map, and the messy rewind in get_user_pages to cope with
      its failure.  Oh, and could we please call that "struct page *page" like
      everywhere else, instead of "struct page *map"?
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      08ef4729
    • Hugh Dickins's avatar
      [PATCH] rme96xx: fix PageReserved range · 7c2f3fda
      Hugh Dickins authored
      rme96xx busmaster_malloc miscalculates and fails to set PageReserved on any
      page of char *buf; but busmaster_free does it right, so do the same (I
      don't have the card, just noticed this while sifting for rmap BUGs).
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      7c2f3fda
    • Hugh Dickins's avatar
      [PATCH] bad_page: clear reclaim and slab · 334795ec
      Hugh Dickins authored
      Since free_pages_check complains if PG_reclaim or PG_slab is set, bad_page
      ought to clear them to avoid repetitive reports (Nikita noticed this too).
      Let prep_new_page check page_count and PG_slab as free_pages_check does.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      334795ec
    • Hugh Dickins's avatar
      [PATCH] dup_mmap: update comment on new vma · 45918e1a
      Hugh Dickins authored
      Remove part of comment on linking new vma in dup_mmap: since anon_vma rmap
      came in, try_to_unmap_one knows the vma without needing find_vma.  But add
      a comment to note that here vma is inserted without mmap_sem.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      45918e1a
    • Hugh Dickins's avatar
      [PATCH] mbind: check_range use standard ptwalk · 91612e0d
      Hugh Dickins authored
      Strict mbind's check for currently mapped pages being on node has been
      using a slow loop which re-evaluates pgd, pud, pmd, pte for each entry:
      replace that by a standard four-level page table walk like others in mm.
      Since mmap_sem is held for writing, page_table_lock can be taken at the
      inner level to limit latency.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Cc: Andi Kleen <ak@muc.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      91612e0d
    • Hugh Dickins's avatar
      [PATCH] mbind: fix verify_pages pte_page · 941150a3
      Hugh Dickins authored
      Strict mbind's check that pages already mapped are on right node has been
      using pte_page without checking if pfn_valid, and without page_table_lock
      to prevent spurious failures when try_to_unmap_one intervenes between the
      pte_present and the pte_page.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Cc: Andi Kleen <ak@muc.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      941150a3
    • Bob Picco's avatar
      [PATCH] ia64: pfn_to_nid() implementation · 400e6514
      Bob Picco authored
      pfn_to_nid is undefined.  We haven't had this interface on ia64.  The
      sys_mbind patches need it.
      
      Oh, the paddr_to_nid call could fail when DISCONTIG+NUMA is configured
      because there isn't any ACPI SRAT NUMA information.
      Signed-off-by: default avatarBob Picco <bob.picco@hp.com>
      Acked-by: default avatarTony Luck <tony.luck@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      400e6514
    • Hugh Dickins's avatar
      [PATCH] shmem: restore superblock info · 0edd73b3
      Hugh Dickins authored
      To improve shmem scalability, we allowed tmpfs instances which don't need
      their blocks or inodes limited not to count them, and not to allocate any
      sbinfo.  Which was okay when the only use for the sbinfo was accounting
      blocks and inodes; but since then a couple of unrelated projects extending
      tmpfs want to store other data in the sbinfo.  Whether either extension
      reaches mainline is beside the point: I'm guilty of a bad design decision,
      and should restore sbinfo to make any such future extensions easier.
      
      So, once again allocate a shmem_sb_info for every shmem/tmpfs instance, and
      now let max_blocks 0 indicate unlimited blocks, and max_inodes 0 unlimited
      inodes.  Brent Casavant verified (many months ago) that this does not
      perceptibly impact the scalability (since the unlimited sbinfo cacheline is
      repeatedly accessed but only once dirtied).
      
      And merge shmem_set_size into its sole caller shmem_remount_fs.
      Signed-off-by: default avatarHugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      0edd73b3
    • Jes Sorensen's avatar
      [PATCH] SN2 XPC build patches · 65ed0b33
      Jes Sorensen authored
      This patch contains the bits to make the XPC code use the uncached
      allocator rather than calling into the mspec driver.  It also includes the
      mspec.h header which is required to build the XPC modules.
      Signed-off-by: default avatarJes Sorensen <jes@wildopensource.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      65ed0b33
    • Jes Sorensen's avatar
      [PATCH] ia64 uncached alloc · f14f75b8
      Jes Sorensen authored
      This patch contains the ia64 uncached page allocator and the generic
      allocator (genalloc).  The uncached allocator was formerly part of the SN2
      mspec driver but there are several other users of it so it has been split
      off from the driver.
      
      The generic allocator can be used by device driver to manage special memory
      etc.  The generic allocator is based on the allocator from the sym53c8xx_2
      driver.
      
      Various users on ia64 needs uncached memory.  The SGI SN architecture requires
      it for inter-partition communication between partitions within a large NUMA
      cluster.  The specific user for this is the XPC code.  Another application is
      large MPI style applications which use it for synchronization, on SN this can
      be done using special 'fetchop' operations but it also benefits non SN
      hardware which may use regular uncached memory for this purpose.  Performance
      of doing this through uncached vs cached memory is pretty substantial.  This
      is handled by the mspec driver which I will push out in a seperate patch.
      
      Rather than creating a specific allocator for just uncached memory I came up
      with genalloc which is a generic purpose allocator that can be used by device
      drivers and other subsystems as they please.  For instance to handle onboard
      device memory.  It was derived from the sym53c7xx_2 driver's allocator which
      is also an example of a potential user (I am refraining from modifying sym2
      right now as it seems to have been under fairly heavy development recently).
      
      On ia64 memory has various properties within a granule, ie.  it isn't safe to
      access memory as uncached within the same granule as currently has memory
      accessed in cached mode.  The regular system therefore doesn't utilize memory
      in the lower granules which is mixed in with device PAL code etc.  The
      uncached driver walks the EFI memmap and pulls out the spill uncached pages
      and sticks them into the uncached pool.  Only after these chunks have been
      utilized, will it start converting regular cached memory into uncached memory.
      Hence the reason for the EFI related code additions.
      Signed-off-by: default avatarJes Sorensen <jes@wildopensource.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      f14f75b8
    • Christoph Lameter's avatar
      [PATCH] Reduce size of huge boot per_cpu_pageset · 2caaad41
      Christoph Lameter authored
      Reduce size of the huge per_cpu_pageset structure in __initdata introduced
      into mm1 with the pageset localization patchset.  Use one specially
      configured pageset per cpu for all zones and nodes during bootup.
      
      - Avoid duplication of pageset initialization code.
      - do the adding to the pageset list before potential free_pages_bulk
        in free_hot_cold_page (otherwise we would have to hold a page
        in a pageset during the period that the boot pagesets are in use).
      - remove mistaken __cpuinitdata attribute and revert back to __initdata
        for the boot pageset. A boot pageset is not necessary for cpu hotplug.
      
      Tested for UP SMP NUMA on x86_64 (2.6.12-rc6-mm1): UP SMP NUMA Tested on
      IA64 (2.6.12-rc5-mm2): NUMA (2.6.12-rc6-mm1 broken for IA64 because of
      sparsemem patches)
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      2caaad41
    • Christoph Lameter's avatar
      [PATCH] Periodically drain non local pagesets · 4ae7c039
      Christoph Lameter authored
      The pageset array can potentially acquire a huge amount of memory on large
      NUMA systems.  F.e.  on a system with 512 processors and 256 nodes there
      will be 256*512 pagesets.  If each pageset only holds 5 pages then we are
      talking about 655360 pages.With a 16K page size on IA64 this results in
      potentially 10 Gigabytes of memory being trapped in pagesets.  The typical
      cases are much less for smaller systems but there is still the potential of
      memory being trapped in off node pagesets.  Off node memory may be rarely
      used if local memory is available and so we may potentially have memory in
      seldom used pagesets without this patch.
      
      The slab allocator flushes its per cpu caches every 2 seconds.  The
      following patch flushes the off node pageset caches in the same way by
      tying into the slab flush.
      
      The patch also changes /proc/zoneinfo to include the number of pages
      currently in each pageset.
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      4ae7c039
    • Janet Morgan's avatar
      [PATCH] add OOM debug · 578c2fd6
      Janet Morgan authored
      This patch provides more debug info when the system is OOM.  It displays
      memory stats (basically sysrq-m info) from __alloc_pages() when page
      allocation fails and during OOM kill.
      
      Thanks to Dave Jones for coming up with the idea.
      Signed-off-by: default avatarJanet Morgan <janetmor@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      578c2fd6
    • Benjamin LaHaise's avatar
      [PATCH] __read_page_state(): pass unsigned long instead of unsigned · c2f29ea1
      Benjamin LaHaise authored
      By making the offset argument of __read_page_state an unsigned long instead of
      unsigned, we can avoid forcing the compiler to sign extend a usually constant
      argument.  This saves 1 instruction on x86-64.
      Signed-off-by: default avatarBenjamin LaHaise <benjamin.c.lahaise@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c2f29ea1
    • Benjamin LaHaise's avatar
      [PATCH] __mod_page_state(): pass unsigned long instead of unsigned · 83e5d8f7
      Benjamin LaHaise authored
      By making the offset argument of __mod_page_state an unsigned long instead
      of unsigned, we can avoid forcing the compiler to sign extend a usually
      constant argument.  This saves 1 instruction on x86-64.
      Signed-off-by: default avatarBenjamin LaHaise <benjamin.c.lahaise@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      83e5d8f7
    • Darren Hart's avatar
      [PATCH] vm: try_to_free_pages unused argument · 1ad539b2
      Darren Hart authored
      try_to_free_pages accepts a third argument, order, but hasn't used it since
      before 2.6.0.  The following patch removes the argument and updates all the
      calls to try_to_free_pages.
      Signed-off-by: default avatarDarren Hart <dvhltc@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      1ad539b2
    • Badari Pulavarty's avatar
      [PATCH] mm: remove PG_highmem · cbe37d09
      Badari Pulavarty authored
      Remove PG_highmem, to save a page flag.  Use is_highmem() instead.  It'll
      generate a little more code, but we don't use PageHigheMem() in many places.
      Signed-off-by: default avatarBadari Pulavarty <pbadari@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      cbe37d09
    • Chris Wright's avatar
      [PATCH] mmap topdown fix for large stack limit, large allocation · 73219d17
      Chris Wright authored
      The topdown changes in 2.6.12-rc1 can cause large allocations with large
      stack limit to fail, despite there being space available.  The
      mmap_base-len is only valid when len >= mmap_base.  However, nothing in
      topdown allocator checks this.  It's only (now) caught at higher level,
      which will cause allocation to simply fail.  The following change restores
      the fallback to bottom-up path, which will allow large allocations with
      large stack limit to potentially still succeed.
      Signed-off-by: default avatarChris Wright <chrisw@osdl.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      73219d17
    • Wolfgang Wander's avatar
      [PATCH] Avoiding mmap fragmentation · 1363c3cd
      Wolfgang Wander authored
      Ingo recently introduced a great speedup for allocating new mmaps using the
      free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
      causes huge performance increases in thread creation.
      
      The downside of this patch is that it does lead to fragmentation in the
      mmap-ed areas (visible via /proc/self/maps), such that some applications
      that work fine under 2.4 kernels quickly run out of memory on any 2.6
      kernel.
      
      The problem is twofold:
      
        1) the free_area_cache is used to continue a search for memory where
           the last search ended.  Before the change new areas were always
           searched from the base address on.
      
           So now new small areas are cluttering holes of all sizes
           throughout the whole mmap-able region whereas before small holes
           tended to close holes near the base leaving holes far from the base
           large and available for larger requests.
      
        2) the free_area_cache also is set to the location of the last
           munmap-ed area so in scenarios where we allocate e.g.  five regions of
           1K each, then free regions 4 2 3 in this order the next request for 1K
           will be placed in the position of the old region 3, whereas before we
           appended it to the still active region 1, placing it at the location
           of the old region 2.  Before we had 1 free region of 2K, now we only
           get two free regions of 1K -> fragmentation.
      
      The patch addresses thes issues by introducing yet another cache descriptor
      cached_hole_size that contains the largest known hole size below the
      current free_area_cache.  If a new request comes in the size is compared
      against the cached_hole_size and if the request can be filled with a hole
      below free_area_cache the search is started from the base instead.
      
      The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
      (earlier posted) leakme.c test program terminates after 50000+ iterations
      with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
      (as expected) with thread creation, Ingo's test_str02 with 20000 threads
      requires 0.7s system time.
      
      Taking out Ingo's patch (un-patch available per request) by basically
      deleting all mentions of free_area_cache from the kernel and starting the
      search for new memory always at the respective bases we observe: leakme
      terminates successfully with 11 distinctive hardly fragmented areas in
      /proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
      time for Ingo's test_str02 with 20000 threads.
      
      Now - drumroll ;-) the appended patch works fine with leakme: it ends with
      only 7 distinct areas in /proc/self/maps and also thread creation seems
      sufficiently fast with 0.71s for 20000 threads.
      Signed-off-by: default avatarWolfgang Wander <wwc@rentec.com>
      Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
      Signed-off-by: default avatarKen Chen <kenneth.w.chen@intel.com>
      Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      1363c3cd
    • Christoph Lameter's avatar
      [PATCH] node local per-cpu-pages · e7c8d5c9
      Christoph Lameter authored
      This patch modifies the way pagesets in struct zone are managed.
      
      Each zone has a per-cpu array of pagesets.  So any particular CPU has some
      memory in each zone structure which belongs to itself.  Even if that CPU is
      not local to that zone.
      
      So the patch relocates the pagesets for each cpu to the node that is nearest
      to the cpu instead of allocating the pagesets in the (possibly remote) target
      zone.  This means that the operations to manage pages on remote zone can be
      done with information available locally.
      
      We play a macro trick so that non-NUMA pmachines avoid the additional
      pointer chase on the page allocator fastpath.
      
      AIM7 benchmark on a 32 CPU SGI Altix
      
      w/o patches:
      Tasks    jobs/min  jti  jobs/min/task      real       cpu
          1      484.68  100       484.6769     12.01      1.97   Fri Mar 25 11:01:42 2005
        100    27140.46   89       271.4046     21.44    148.71   Fri Mar 25 11:02:04 2005
        200    30792.02   82       153.9601     37.80    296.72   Fri Mar 25 11:02:42 2005
        300    32209.27   81       107.3642     54.21    451.34   Fri Mar 25 11:03:37 2005
        400    34962.83   78        87.4071     66.59    588.97   Fri Mar 25 11:04:44 2005
        500    31676.92   75        63.3538     91.87    742.71   Fri Mar 25 11:06:16 2005
        600    36032.69   73        60.0545     96.91    885.44   Fri Mar 25 11:07:54 2005
        700    35540.43   77        50.7720    114.63   1024.28   Fri Mar 25 11:09:49 2005
        800    33906.70   74        42.3834    137.32   1181.65   Fri Mar 25 11:12:06 2005
        900    34120.67   73        37.9119    153.51   1325.26   Fri Mar 25 11:14:41 2005
       1000    34802.37   74        34.8024    167.23   1465.26   Fri Mar 25 11:17:28 2005
      
      with slab API changes and pageset patch:
      
      Tasks    jobs/min  jti  jobs/min/task      real       cpu
          1      485.00  100       485.0000     12.00      1.96   Fri Mar 25 11:46:18 2005
        100    28000.96   89       280.0096     20.79    150.45   Fri Mar 25 11:46:39 2005
        200    32285.80   79       161.4290     36.05    293.37   Fri Mar 25 11:47:16 2005
        300    40424.15   84       134.7472     43.19    438.42   Fri Mar 25 11:47:59 2005
        400    39155.01   79        97.8875     59.46    590.05   Fri Mar 25 11:48:59 2005
        500    37881.25   82        75.7625     76.82    730.19   Fri Mar 25 11:50:16 2005
        600    39083.14   78        65.1386     89.35    872.79   Fri Mar 25 11:51:46 2005
        700    38627.83   77        55.1826    105.47   1022.46   Fri Mar 25 11:53:32 2005
        800    39631.94   78        49.5399    117.48   1169.94   Fri Mar 25 11:55:30 2005
        900    36903.70   79        41.0041    141.94   1310.78   Fri Mar 25 11:57:53 2005
       1000    36201.23   77        36.2012    160.77   1458.31   Fri Mar 25 12:00:34 2005
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Signed-off-by: default avatarShobhit Dayal <shobhit@calsoftinc.com>
      Signed-off-by: default avatarShai Fultheim <Shai@Scalex86.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      e7c8d5c9
    • David Gibson's avatar
      [PATCH] Hugepage consolidation · 63551ae0
      David Gibson authored
      A lot of the code in arch/*/mm/hugetlbpage.c is quite similar.  This patch
      attempts to consolidate a lot of the code across the arch's, putting the
      combined version in mm/hugetlb.c.  There are a couple of uglyish hacks in
      order to covert all the hugepage archs, but the result is a very large
      reduction in the total amount of code.  It also means things like hugepage
      lazy allocation could be implemented in one place, instead of six.
      
      Tested, at least a little, on ppc64, i386 and x86_64.
      
      Notes:
      	- this patch changes the meaning of set_huge_pte() to be more
      	  analagous to set_pte()
      	- does SH4 need s special huge_ptep_get_and_clear()??
      Acked-by: default avatarWilliam Lee Irwin <wli@holomorphy.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      63551ae0
    • Martin Hicks's avatar
      [PATCH] VM: rate limit early reclaim · 1e7e5a90
      Martin Hicks authored
      When early zone reclaim is turned on the LRU is scanned more frequently when a
      zone is low on memory.  This limits when the zone reclaim can be called by
      skipping the scan if another thread (either via kswapd or sync reclaim) is
      already reclaiming from the zone.
      Signed-off-by: default avatarMartin Hicks <mort@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      1e7e5a90
    • Martin Hicks's avatar
      [PATCH] VM: add __GFP_NORECLAIM · 0c35bbad
      Martin Hicks authored
      When using the early zone reclaim, it was noticed that allocating new pages
      that should be spread across the whole system caused eviction of local pages.
      
      This adds a new GFP flag to prevent early reclaim from happening during
      certain allocation attempts.  The example that is implemented here is for page
      cache pages.  We want page cache pages to be spread across the whole system,
      and we don't want page cache pages to evict other pages to get local memory.
      Signed-off-by: default avatarMartin Hicks <mort@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      0c35bbad
    • Martin Hicks's avatar
      [PATCH] VM: early zone reclaim · 753ee728
      Martin Hicks authored
      This is the core of the (much simplified) early reclaim.  The goal of this
      patch is to reclaim some easily-freed pages from a zone before falling back
      onto another zone.
      
      One of the major uses of this is NUMA machines.  With the default allocator
      behavior the allocator would look for memory in another zone, which might be
      off-node, before trying to reclaim from the current zone.
      
      This adds a zone tuneable to enable early zone reclaim.  It is selected on a
      per-zone basis and is turned on/off via syscall.
      
      Adding some extra throttling on the reclaim was also required (patch
      4/4).  Without the machine would grind to a crawl when doing a "make -j"
      kernel build.  Even with this patch the System Time is higher on
      average, but it seems tolerable.  Here are some numbers for kernbench
      runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:
      
      			wall  user   sys   %cpu  ctx sw.  sleeps
      			----  ----   ---   ----   ------  ------
      No patch		1009  1384   847   258   298170   504402
      w/patch, no reclaim     880   1376   667   288   254064   396745
      w/patch & reclaim       1079  1385   926   252   291625   548873
      
      These numbers are the average of 2 runs of 3 "make -j" runs done right
      after system boot.  Run-to-run variability for "make -j" is huge, so
      these numbers aren't terribly useful except to seee that with reclaim
      the benchmark still finishes in a reasonable amount of time.
      
      I also looked at the NUMA hit/miss stats for the "make -j" runs and the
      reclaim doesn't make any difference when the machine is thrashing away.
      
      Doing a "make -j8" on a single node that is filled with page cache pages
      takes 700 seconds with reclaim turned on and 735 seconds without reclaim
      (due to remote memory accesses).
      
      The simple zone_reclaim syscall program is at
      http://www.bork.org/~mort/sgi/zone_reclaim.cSigned-off-by: default avatarMartin Hicks <mort@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      753ee728
    • Martin Hicks's avatar
      [PATCH] VM: add may_swap flag to scan_control · bfbb38fb
      Martin Hicks authored
      Here's the next round of these patches.  These are totally different in
      an attempt to meet the "simpler" request after the last patches.  For
      reference the earlier threads are:
      
      http://marc.theaimsgroup.com/?l=linux-kernel&m=110839604924587&w=2
      http://marc.theaimsgroup.com/?l=linux-mm&m=111461480721249&w=2
      
      This set of patches replaces my other vm- patches that are currently in
      -mm.  So they're against 2.6.12-rc5-mm1 about half way through the -mm
      patchset.
      
      As I said already this patch is a lot simpler.  The reclaim is turned on
      or off on a per-zone basis using a syscall.  I haven't tested the x86
      syscall, so it might be wrong.  It uses the existing reclaim/pageout
      code with the small addition of a may_swap flag to scan_control
      (patch 1/4).
      
      I also added __GFP_NORECLAIM (patch 3/4) so that certain allocation
      types can be flagged to never cause reclaim.  This was a deficiency
      that was in all of my earlier patch sets.  Previously, doing a big
      buffered read would fill one zone with page cache and then start to
      reclaim from that same zone, leaving the other zones untouched.
      
      Adding some extra throttling on the reclaim was also required (patch
      4/4).  Without the machine would grind to a crawl when doing a "make -j"
      kernel build.  Even with this patch the System Time is higher on
      average, but it seems tolerable.  Here are some numbers for kernbench
      runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:
      
      			wall  user   sys   %cpu  ctx sw.  sleeps
      			----  ----   ---   ----   ------  ------
      No patch		1009  1384   847   258   298170   504402
      w/patch, no reclaim     880   1376   667   288   254064   396745
      w/patch & reclaim       1079  1385   926   252   291625   548873
      
      These numbers are the average of 2 runs of 3 "make -j" runs done right
      after system boot.  Run-to-run variability for "make -j" is huge, so
      these numbers aren't terribly useful except to seee that with reclaim
      the benchmark still finishes in a reasonable amount of time.
      
      I also looked at the NUMA hit/miss stats for the "make -j" runs and the
      reclaim doesn't make any difference when the machine is thrashing away.
      
      Doing a "make -j8" on a single node that is filled with page cache pages
      takes 700 seconds with reclaim turned on and 735 seconds without reclaim
      (due to remote memory accesses).
      
      The simple zone_reclaim syscall program is at
      http://www.bork.org/~mort/sgi/zone_reclaim.c
      
      This patch:
      
      This adds an extra switch to the scan_control struct.  It simply lets the
      reclaim code know if its allowed to swap pages out.
      
      This was required for a simple per-zone reclaimer.  Without this addition
      pages would be swapped out as soon as a zone ran out of memory and the early
      reclaim kicked in.
      Signed-off-by: default avatarMartin Hicks <mort@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      bfbb38fb
    • Nikita Danilov's avatar
      [PATCH] mm: add /proc/zoneinfo · 295ab934
      Nikita Danilov authored
      Add /proc/zoneinfo file to display information about memory zones.  Useful
      to analyze VM behaviour.
      Signed-off-by: default avatarNikita Danilov <nikita@clusterfs.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      295ab934
    • Prasanna Meda's avatar
      [PATCH] madvise: merge the maps · 05b74384
      Prasanna Meda authored
      This attempts to merge back the split maps.  This code is mostly copied
      from Chrisw's mlock merging from post 2.6.11 trees.  The only difference is
      in munmapped_error handling.  Also passed prev to willneed/dontneed,
      eventhogh they do not handle it now, since I felt it will be cleaner,
      instead of handling prev in madvise_vma in some cases and in subfunction in
      some cases.
      Signed-off-by: default avatarPrasanna Meda <pmeda@akamai.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      05b74384
    • Prasanna Meda's avatar
      [PATCH] madvise: do not split the maps · e798c6e8
      Prasanna Meda authored
      This attempts to avoid splittings when it is not needed, that is when
      vm_flags are same as new flags.  The idea is from the <2.6.11 mlock_fixup
      and others.  This will provide base for the next madvise merging patch.
      Signed-off-by: default avatarPrasanna Meda <pmeda@akamai.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      e798c6e8
    • akpm@osdl.org's avatar
      [PATCH] vmscan: notice slab shrinking · b15e0905
      akpm@osdl.org authored
      Fix a problem identified by Andrea Arcangeli <andrea@suse.de>
      
      kswapd will set a zone into all_unreclaimable state if it sees that we're not
      successfully reclaiming LRU pages.  But that fails to notice that we're
      successfully reclaiming slab obects, so we can set all_unreclaimable too soon.
      
      So change shrink_slab() to return a success indication if it actually
      reclaimed some objects, and don't assume that the zone is all_unreclaimable if
      that is true.  This means that we won't enter all_unreclaimable state if we
      are successfully freeing slab objects but we're not yet actually freeing slab
      pages, due to internal fragmentation.
      
      (hm, this has a shortcoming.  We could be successfully freeing ZONE_NORMAL
      slab objects while being really oom on ZONE_DMA.  If that happens then kswapd
      might burn a lot of CPU.  But given that there might be some slab objects in
      ZONE_DMA, perhaps that is appropriate.)
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      b15e0905
    • Ingo Molnar's avatar
      [PATCH] smp_processor_id() cleanup · 39c715b7
      Ingo Molnar authored
      This patch implements a number of smp_processor_id() cleanup ideas that
      Arjan van de Ven and I came up with.
      
      The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
      spaghetti was hard to follow both on the implementational and on the
      usage side.
      
      Some of the complexity arose from picking wrong names, some of the
      complexity comes from the fact that not all architectures defined
      __smp_processor_id.
      
      In the new code, there are two externally visible symbols:
      
       - smp_processor_id(): debug variant.
      
       - raw_smp_processor_id(): nondebug variant. Replaces all existing
         uses of _smp_processor_id() and __smp_processor_id(). Defined
         by every SMP architecture in include/asm-*/smp.h.
      
      There is one new internal symbol, dependent on DEBUG_PREEMPT:
      
       - debug_smp_processor_id(): internal debug variant, mapped to
                                   smp_processor_id().
      
      Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
      lib/smp_processor_id.c file.  All related comments got updated and/or
      clarified.
      
      I have build/boot tested the following 8 .config combinations on x86:
      
       {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}
      
      I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
      architectures are untested, but should work just fine.)
      Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarArjan van de Ven <arjan@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      39c715b7
    • Suresh Siddha's avatar
      [PATCH] x86_64: TASK_SIZE fixes for compatibility mode processes · 84929801
      Suresh Siddha authored
      Appended patch will setup compatibility mode TASK_SIZE properly.  This will
      fix atleast three known bugs that can be encountered while running
      compatibility mode apps.
      
      a) A malicious 32bit app can have an elf section at 0xffffe000.  During
         exec of this app, we will have a memory leak as insert_vm_struct() is
         not checking for return value in syscall32_setup_pages() and thus not
         freeing the vma allocated for the vsyscall page.  And instead of exec
         failing (as it has addresses > TASK_SIZE), we were allowing it to
         succeed previously.
      
      b) With a 32bit app, hugetlb_get_unmapped_area/arch_get_unmapped_area
         may return addresses beyond 32bits, ultimately causing corruption
         because of wrap-around and resulting in SEGFAULT, instead of returning
         ENOMEM.
      
      c) 32bit app doing this below mmap will now fail.
      
        mmap((void *)(0xFFFFE000UL), 0x10000UL, PROT_READ|PROT_WRITE,
      	MAP_FIXED|MAP_PRIVATE|MAP_ANON, 0, 0);
      Signed-off-by: default avatarZou Nan hai <nanhai.zou@intel.com>
      Signed-off-by: default avatarSuresh Siddha <suresh.b.siddha@intel.com>
      Cc: Andi Kleen <ak@muc.de>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      84929801