Remove redundant code and use general smu_v11_0_fini_smc_tables function.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some clients(e.g., kfd) query sclk/mclk through this function.
As cyan skillfish doesn't support dpm, for sclk, set min/max
to CYAN_SKILLFISH_SCLK_MIN/CYAN_SKILLFISH_SCLK_MAX(to maintain the
existing logic).For others, set both min and max to current value.

Before this patch:
 # /opt/rocm/opencl/bin/clinfo

 Max clock frequency:                           0Mhz

After this patch:
 # /opt/rocm/opencl/bin/clinfo

 Max clock frequency:                           2000Mhz

v2:
 - Maintain the existing min/max sclk logic.(Lijo)
v3:
 - Avoid fetching metrics table twice.(Lijo)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit df4f0041.

Xgmi ras initialization had been moved from .late_init to early_init,
the defect of repeated calling amdgpu_ras_register_ras_block had been
fixed, so revert this patch.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move xgmi ras initialization from .late_init to .early_init, which let
xgmi ras can be initialized only once.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pmfw read ecc info registers in the following order,
     umc0: ch_inst 0, 1, 2 ... 7
     umc1: ch_inst 0, 1, 2 ... 7
The position of the register value stored in eccinfo
table is calculated according to the below formula,
     channel_index = umc_inst * channel_in_umc + ch_inst
Driver directly use the index of eccinfo table array
as channel index, it's not correct, driver needs convert
eccinfo table array index to channel index according to
channel_idx_tbl.
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

create a common helper function for soc15 and onwards
to read bios image from rom
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not needed anymore.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of ip specific implementation for rlcg
indirect register access
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The helper will be used to access registers from sriov
guest in full access time
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize all the register offsets that will be
used in rlcg indirect reg access path for gfx10
in sw_init phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initialize all the register offsets that will be
used in rlcg indirect reg access path for gfx9 in
sw_init phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add structures that are used to cache registers offsets
for rlcg indirect reg access ctrl and flag availability
of such interface
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to common helper to query rlcg access flag
specified by sriov host driver for gfx10
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to common helper to query rlcg access flag
specified by sriov host driver for gfx9
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Query rlc indirect register access approach specified
by sriov host driver per ip blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Zhou, Peng Ju <PengJu.Zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Eliminate the follow smatch warning:
drivers/gpu/drm/amd/display/dc/dml/calcs/dce_calcs.c:3415 bw_calcs() warn: inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Resource release is needed on the error handling path
to prevent memory leak.

[how]
Fix this by adding kfree on the error handling path.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Clean the following coccicheck warning:

./drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c:7035:2-4: WARNING: possible
condition with no effect (if == else).
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.

Fix it by decreasing the refcount of specific object before returning
the error code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long.  In general udelays of longer than 2000us are
not recommended on any architecture.  Switch to msleep in these
cases.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements.  Add them to the unsupported list
as well so we don't attempt to bind to them.  The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In multiple GPU configuration, when failed to send a SMU
message, it's hard to figure out which GPU has such problem.
So it's not comfortable to user.

[40190.142181] amdgpu: [powerplay]
	last message was failed ret is 65535
[40190.242420] amdgpu: [powerplay]
	failed to send message 201 ret is 65535
[40190.392763] amdgpu: [powerplay]
	last message was failed ret is 65535
[40190.492997] amdgpu: [powerplay]
	failed to send message 200 ret is 65535
[40190.743575] amdgpu: [powerplay]
	last message was failed ret is 65535
[40190.843812] amdgpu: [powerplay]
	failed to send message 282 ret is 65535
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

NULL pointer check has guarded it already.

calltrace:
amdgpu_ttm_gart_bind+0x49/0xa0 [amdgpu]
amdgpu_ttm_alloc_gart+0x13f/0x180 [amdgpu]
amdgpu_bo_create_reserved+0x139/0x2c0 [amdgpu]
? amdgpu_ttm_debugfs_init+0x120/0x120 [amdgpu]
amdgpu_bo_create_kernel+0x17/0x80 [amdgpu]
amdgpu_ttm_init+0x542/0x5e0 [amdgpu]

Fixes: 1b08dfb8 ("drm/amdgpu: remove gart.ready flag")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
During resume path, dpcd_set_source_specific_data is taking
extra time when core_link_write_dpcd fails on DP_SOURCE_OUI+0x03
and DP_SOURCE_MINIMUM_HBLANK_SUPPORTED. Here,aux->transfer fails
with multiple retries and consume significant amount time during
S0i3 resume.

[How]
Not to call dpcd_set_source_specific_data during resume path
when there is no oled panel connected and achieve faster resume
during S0i3.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As all those related APIs are already well protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As all those related APIs are already well protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As those APIs related are already well protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As all those related APIs are already well protected by
adev->pm.mutex and smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As those related APIs are already protected by adev->pm.mutex.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As all those APIs are already protected either by adev->pm.mutex
or smu->message_lock.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Suppress the warning below on building htmldocs:
drivers/gpu/drm/amd/include/amd_shared.h:103: warning: Enum value
'AMD_IP_BLOCK_TYPE_NUM' not described in enum 'amd_ip_block_type'

Fixes: 6ee27ee2 ("drm/amd/pm: avoid duplicate powergate/ungate setting")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It doesn't work under IP discovery mode. Make it work!
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Alex Deucher <aleander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Yellow carp has been outputting versions like `1093.24.0`, but this
is supposed to be 69.24.0. That is the MSB is being interpreted
incorrectly.

The MSB is not part of the major version, but has generally been
treated that way thus far.  It's actually the program, and used to
distinguish between two programs from a similar family but different
codebase.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VF acces the EEPROM is blocked by security policy, we might need other way
to get SKUs info for VF

v2: squash in compilation fix from Luben
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch will fix the page fault caused by uninitialized variables.

Error Log:
......
[ 130.246323] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 131.963112] [drm] PCIE GART of 512M enabled (table at 0x0000008000000000).
[ 131.963130] BUG: unable to handle page fault for address: 000000000002db80
[ 131.963181] #PF: supervisor write access in kernel mode
[ 131.963210] #PF: error_code(0x0002) - not-present page
[ 131.963233] PGD 0 P4D 0
[ 131.963253] Oops: 0002 [#1] SMP NOPTI
[ 131.963273] CPU: 3 PID: 1411 Comm: modprobe Not tainted 5.13.0+ #1
[ 131.963338] RIP: 0010:osq_lock+0x4d/0x120
[ 131.963381] Code: 10 00 00 00 00 48 c7 02 00 00 00 00 89 42 14 87 07 85 c0 0f 84 d0 00 00 00 83 e8 01 48 98 48 03 0c c5 00 d9 ea 9c 48 89 4a 08 <48> 89 11 44 8b 42 10 45 85 c0 0f 85 af 00 00 00 55 48 89 fe 65 4c
[ 131.963460] RSP: 0018:ffffa40481717768 EFLAGS: 00010202
[ 131.963483] RAX: fffffffffffffffe RBX: ffffa40481717920 RCX: 000000000002db80
[ 131.963520] RDX: ffff9256fecedb80 RSI: ffff9256cbed2e80 RDI: ffffa40481717ac4
[ 131.963547] RBP: ffffa40481717808 R08: ffffa40481717920 R09: 00000000ffffffff
[ 131.963582] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
[ 131.963609] R13: ffffa40481717ac4 R14: ffffa40481717ab8 R15: ffff9256c9480000
[ 131.963646] FS: 00007f23d9b9c540(0000) GS:ffff9256fecc0000(0000) knlGS:0000000000000000
[ 131.963687] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 131.963721] CR2: 000000000002db80 CR3: 0000000008444000 CR4: 00000000000506e0
[ 131.963758] Call Trace:
[ 131.963772] ? __ww_mutex_lock.isra.0+0x3a2/0x760
[ 131.963810] ? prb_read_valid+0x1c/0x20
[ 131.963830] ? console_unlock+0x2fe/0x4f0
[ 131.963849] __ww_mutex_lock_interruptible_slowpath+0x16/0x20
[ 131.963882] ww_mutex_lock_interruptible+0x83/0x90
[ 131.963908] amdgpu_bo_create_reserved+0xf0/0x1e0 [amdgpu]
[ 131.964237] amdgpu_bo_create_kernel+0x17/0x80 [amdgpu]
[ 131.964509] amdgpu_gmc_vram_checking+0x41/0xf0 [amdgpu]
[ 131.964807] gmc_v10_0_hw_init+0x105/0x120 [amdgpu]
[ 131.965108] amdgpu_device_init.cold+0x1aa4/0x1e3e [amdgpu]
......
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pmfw read ecc info registers and store values in
eccinfo_table in the following order

umc0 ch_inst 0, 1, 2 ... 7
umc1 ch_inst 0, 1, 2 ... 7
...
umc3 ch_inst 0, 1, 2 ... 7

Driver should convert eccinfo_table_idx to channel_index according
to channel_idx_tbl.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.

[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.

[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>