- 06 Dec, 2016 40 commits
-
-
Jiri Slaby authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 42acfc66 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Petr Písař <ppisar@redhat.com> Fixes: f8df13e0 (tty: Clean console safely) Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Christophe JAILLET authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 51fbc7c0 upstream. In commit 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support"), the size of the memory allocated with 'dma_alloc_coherent()' has been modified but the corresponding calls to 'dma_free_coherent()' have not been updated accordingly. This has been spotted with coccinelle, using the following script: //////////////////// @r@ expression x0, x1, y0, y1, z0, z1, t0, t1, ret; @@ * ret = dma_alloc_coherent(x0, y0, z0, t0); ... * dma_free_coherent(x1, y1, ret, t1); @script:python@ y0 << r.y0; y1 << r.y1; @@ if y1.find(y0) == -1: print "WARNING: sizes look different: '%s' vs '%s'" % (y0, y1) //////////////////// Fixes: 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
David Hsu authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 0733424c upstream. Exported pwm channels aren't removed before the pwmchip and are leaked. This results in invalid sysfs files. This fix removes all exported pwm channels before chip removal. Signed-off-by:
David Hsu <davidhsu@google.com> Fixes: 76abbdde ("pwm: Add sysfs interface") Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Boris Brezillon authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit ecbfa8ea upstream. scan_pool() does not mark the PEB for scrubing when bitflips are detected in the EC header of a free PEB (VID header region left to 0xff). Make sure we scrub the PEB in this case. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: dbb7d2a8 ("UBI: Add fastmap core") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit e3ebd894 upstream. The smc91x driver defines a macro that compares its argument to itself, apparently to get a true result while using its argument to avoid a warning about unused local variables. Unfortunately, this triggers a warning with gcc-6, as the comparison is obviously useless: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt': drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (!smc_special_trylock(&lp->lock, flags)) { This replaces the macro with another one that behaves similarly, with a cast to (void) to ensure the argument is used, and using a literal 'true' as its value. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit cfe02a8a upstream. When all subsystems are disabled, gcc notices that cgroup_subsys_enabled_key is a zero-length array and that any access to it must be out of bounds: In file included from ../include/linux/cgroup.h:19:0, from ../kernel/cgroup.c:31: ../kernel/cgroup.c: In function 'cgroup_add_cftypes': ../kernel/cgroup.c:261:53: error: array subscript is above array bounds [-Werror=array-bounds] return static_key_enabled(cgroup_subsys_enabled_key[ssid]); ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ ../include/linux/jump_label.h:271:40: note: in definition of macro 'static_key_enabled' static_key_count((struct static_key *)x) > 0; \ ^ We should never call the function in this particular case, so this is not a bug. In order to silence the warning, this adds an explicit check for the CGROUP_SUBSYS_COUNT==0 case. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 55c4b906 upstream. gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Stephen Rothwell authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit badbda53 upstream. pageblock_order can be (at least) an unsigned int or an unsigned long depending on the kernel config and architecture, so use max_t(unsigned long, ...) when comparing it. fixes these warnings: In file included from include/asm-generic/bug.h:13:0, from arch/powerpc/include/asm/bug.h:127, from include/linux/bug.h:4, from include/linux/mmdebug.h:4, from include/linux/mm.h:8, from include/linux/memblock.h:18, from mm/cma.c:28: mm/cma.c: In function 'cma_init_reserved_mem': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ mm/cma.c:186:27: note: in expansion of macro 'max' alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); ^ mm/cma.c: In function 'cma_declare_contiguous': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:9: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); ^ include/linux/kernel.h:747:21: note: in definition of macro 'max' typeof(y) _max2 = (y); ^ mm/cma.c:270:29: note: in expansion of macro 'max' (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order)); ^ [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.auSigned-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit dd665be0 upstream. gcc-6.0 warns about comparisons between two identical expressions, which is what we get in the floppy driver when writing to the FD_DOR register: drivers/block/floppy.c: In function 'set_dor': drivers/block/floppy.c:810:44: error: self-comparison always evaluates to true [-Werror=tautological-compare] fd_outb(newdor, FD_DOR); It would be nice to use a static inline function instead of the macro, to avoid the warning, but we cannot do that because the FD_DOR definition is incomplete at this point. Adding a cast to (u32) is a harmless way to shut up the warning, just not very nice. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Khem Raj authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 1e407ee3 upstream. gcc-6 correctly warns about a out of bounds access arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] offsetof(struct thread_fp_state, fpr[32][0])); ^ check the end of array instead of beginning of next element to fix this Signed-off-by:
Khem Raj <raj.khem@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Juergen Gross authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 1cf38741 upstream. xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper bound of the loop setting non-kernel-image entries to zero should not exceed the size of level2_kernel_pgt. Reported-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Jiri Olsa authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 67befc65 upstream. Ingo reported following build failure: $ make clean install ... CC plugin_kmem.o fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory /home/mingo/tip/tools/build/Makefile.build:77: recipe for target 'plugin_hrtimer.o' failed make[3]: *** [plugin_hrtimer.o] Error 2 Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed make[2]: *** [plugin_hrtimer-in.o] Error 2 Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed make[1]: *** [libtraceevent_plugins] Error 2 make[1]: *** Waiting for unfinished jobs.... Currently we have the install-traceevent-plugins target being dependent on $(LIBTRACEEVENT), which will actualy not build any plugin. So the install-traceevent-plugins target itself will try to build plugins, but.. Plugins built is also triggered by perf build itself via libtraceevent_plugins target. This might cause a race having one make thread removing temp files from another and result in above error. Fixing this by having proper plugins build dependency before installing plugins. Reported-and-Tested-by:
: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by:
-
Ville Syrjälä authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 4da5caa6 upstream. Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
-
Lucas Stach authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 537b4b46 upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 7dc86ef5 upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
-
Tom St Denis authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit fb9a5b0c upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Michel Dänzer authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 9dc79965 upstream. This reverts commit 1a738347. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Jaehoon Chung authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 45c7a490 upstream. platform_get_resource can be returned the NULL pointer. Then regs->start should be referred to NULL Pointer. devm_ioremap_resource() checks whether res is NULL or not. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ching Huang authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 2bf7dc84 upstream. The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 4d2b496f upstream. map_storep was not being vfree()'d in the module_exit call. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Kashyap Desai authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 1e793f6f upstream. Commit 02b01e01 ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e01Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Johannes Berg authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit ea720935 upstream. In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Stefan Richter authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit e9300a4b upstream. RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 667121ac upstream. The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by:
Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by:
-
Patrick Scheuring authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit da25311c upstream. The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Heinz Mauelshagen authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit dcb2ff56 upstream. If a default leg has failed, any read will cause a new operational default leg to be selected and the read is resubmitted. But until now the read will return failure even though it was successful due to resubmission. The reason for this is bio->bi_error was not being cleared before resubmitting the bio. Fix by clearing bio->bi_error before resubmission. Fixes: 4246a0b6 ("block: add a bi_error field to struct bio") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 34563769 upstream. Commit c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ladi Prosek authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 0ea1e4a6 upstream. According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is negotiated the driver MUST set flags to 0. Not dirtying the available ring in virtqueue_disable_cb also has a minor positive performance impact, improving L1 dcache load missed by ~0.5% in vring_bench. Writes to the used event field (vring_used_event) are still unconditional. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
-
John David Anglin authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 6ed51832 upstream. We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 641089c1 upstream. Make sure the copied up file hits the disk before renaming to the final destination. If this is not done then the copy-up may corrupt the data in the file in case of a crash. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit ede5f3e7 upstream. The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ido Yariv authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit bd768e14 upstream. vcpu->arch.wbinvd_dirty_mask may still be used after freeing it, corrupting memory. For example, the following call trace may set a bit in an already freed cpu mask: kvm_arch_vcpu_load vcpu_load vmx_free_vcpu_nested vmx_free_vcpu kvm_arch_vcpu_free Fix this by deferring freeing of wbinvd_dirty_mask. Signed-off-by:
Ido Yariv <ido@wizery.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Tahsin Erdogan authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit d09960b0 upstream. dm_old_request_fn() has paths that access md->io_barrier. The party destroying io_barrier should ensure that no future execution of dm_old_request_fn() is possible. Move io_barrier destruction to below blk_cleanup_queue() to ensure this and avoid a NULL pointer crash during request-based DM device shutdown. Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit de24e0a1 upstream. The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Dmitry Vyukov authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 32b2921e upstream. Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> CC: David Rientjes <rientjes@google.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by:
-
Mathias Nyman authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 4c39135a upstream. xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by:
Hasan Mahmood <hasan.mahm@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Scot Doyle authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit 009e39ae upstream. When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.comReported-and-tested-by:
Scot Doyle <lkml14@scotdoyle.com> Signed-off-by:
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1642572 Not upstream as it is not needed there. So a patch something like this might be a safe way to fix the potential infoleak in older kernels. THIS IS UNTESTED. It's a very obvious patch, though, so if it compiles it probably works. It just initializes the output variable with 0 in the inline asm description, instead of doing it in the exception handler. It will generate slightly worse code (a few unnecessary ALU operations), but it doesn't have any interactions with the exception handler implementation. Signed-off-by:
-
Bryan Paluch authored
BugLink: http://bugs.launchpad.net/bugs/1642572 commit ed6d6f8f upstream. Increase ohci watchout delay to 275 ms. Previous delay was 250 ms with 20 ms of slack, after removing slack time some ohci controllers don't respond in time. Logs from systems with controllers that have the issue would show "HcDoneHead not written back; disabled" Signed-off-by:
Bryan Paluch <bryanpaluch@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
