- 19 Jun, 2011 7 commits
-
-
Richard Cochran authored
Signed-off-by:
Richard Cochran <richard.cochran@omicron.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
The comment for the skb_tx_timestamp() function suggests calling it just after a buffer is released to the hardware for transmission. However, for drivers that free the buffer in an ISR, this produces a race between the time stamp code and the ISR. This commit changes the comment to advise placing the call just before handing the buffer over to the hardware. Signed-off-by:
-
- 18 Jun, 2011 3 commits
-
-
Francois Romieu authored
Firmware checking is only performed when the firmware is loaded instead of each time the driver inits the phy. Signed-off-by:Francois Romieu <romieu@fr.zoreil.com>
-
Hayes Wang authored
The new firmware format adds versioning as firmware for a specific chipset appears to be subject to change. Current "legacy" format is still supported. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Francois Romieu authored
Signed-off-by:
-
- 17 Jun, 2011 9 commits
-
-
Francois Romieu authored
No functional difference. Signed-off-by: -
Greg Dietsche authored
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by:
David S. Miller <davem@conan.davemloft.net>
-
Greg Dietsche authored
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited() Signed-off-by:
Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de> Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited(). Signed-off-by:
-
Dan Carpenter authored
In c7ac8679 "rtnetlink: Compute and store minimum ifinfo dump size", we moved the allocation under the lock so we need to unlock on error path. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Joe Perches authored
Use the current logging styles. Add #define DEBUG to get same output for <foo>_dbg messages. Convert a few bare printks to pr_err. Fix a likely copy/paste defect where a test was done with RX values: if (num_rx_qs > MAX_RX_QS) { but TX limits were emitted: printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n", num_tx_qs, MAX_TX_QS); Signed-off-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script: $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
-
Sathya Perla authored
This patch provides support for multiple TX queues. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
- 16 Jun, 2011 17 commits
-
-
Jozsef Kadlecsik authored
Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The hash:net,iface type makes possible to store network address and interface name pairs in a set. It's mostly suitable for egress and ingress filtering. Examples: # ipset create test hash:net,iface # ipset add test 192.168.0.0/16,eth0 # ipset add test 192.168.0.0/24,eth1 Signed-off-by: -
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
With the change the sets can use any parameter available for the match and target extensions, like input/output interface. It's required for the hash:net,iface set type. Signed-off-by:
-
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
When creating a set from a range expressed as a network like 10.1.1.172/29, the from address was taken as the IP address part and not masked with the netmask from the cidr. Signed-off-by:
-
Jozsef Kadlecsik authored
The patch "Fix adding ranges to hash types" had got a mistypeing in the timeout variant of the hash types, which actually made the patch ineffective. Fixed! Signed-off-by:
-
Jozsef Kadlecsik authored
The range internally is converted to the network(s) equal to the range. Example: # ipset new test hash:net # ipset add test 10.2.0.0-10.2.1.12 # ipset list test Name: test Type: hash:net Header: family inet hashsize 1024 maxelem 65536 Size in memory: 16888 References: 0 Members: 10.2.1.12 10.2.1.0/29 10.2.0.0/24 10.2.1.8/30 Signed-off-by:
-
Jozsef Kadlecsik authored
A set type may have multiple revisions, for example when syntax is extended. Support continuous revision ranges in set types. Signed-off-by:
-
Jozsef Kadlecsik authored
When ranges are added to hash types, the elements may trigger rehashing the set. However, the last successfully added element was not kept track so the adding started again with the first element after the rehashing. Bug reported by Mr Dash Four. Signed-off-by:
-
Jozsef Kadlecsik authored
Current listing makes possible to list sets with full content only. The patch adds support partial listings, i.e. listing just the existing setnames or listing set headers, without set members. Signed-off-by:
-
Jozsef Kadlecsik authored
The support makes possible to specify the timeout value for the SET target and a flag to reset the timeout for already existing entries. Signed-off-by:
-
Jozsef Kadlecsik authored
Signed-off-by:
-
Jozsef Kadlecsik authored
When an element to a set with timeout added, one can change the timeout by "readding" the element with the "-exist" flag. That means the timeout value is reset to the specified one (or to the default from the set specification if the "timeout n" option is not used). Example ipset add foo 1.2.3.4 timeout 10 ipset add foo 1.2.3.4 timeout 600 -exist Signed-off-by:
-
-
Patrick McHardy authored
-
- 15 Jun, 2011 4 commits
-
-
Matt Carlson authored
The power source switching code is about to get a little more complex. This patch seeks to simplify future power source switching patches by clarifying the existing code. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Reviewed-by:
Benjamin Li <benli@broadcom.com> Signed-off-by:
-
Matt Carlson authored
This patch changes to code to use some of the preprocessor definitions from mii.h over its homegrown equivalents. Signed-off-by:
-
Matt Carlson authored
This patch adds code to present the flow control advertisements through the ethtool get_settings callback. Signed-off-by:
-
Matt Carlson authored
This patch fixes the EEE debounce timer values. Signed-off-by:
-
