- 11 Apr, 2010 27 commits
-
-
Vasu Dev authored
Currently fc_fcp_recv_data calls fc_fcp_retry_cmd to retry failed IO but in this case tgt is still sending data frames, therefore exchange needs to be aborted first before initiating retry. So this patch fixes this by aborting exchange first then have retry. Renames fc_timeout_error to fc_fcp_recovery since fc_timeout_error is already called from several other places beside from fcp timeout handler and then used fc_fcp_recovery for abort & retry from fc_fcp_recv_data, this rename also required renaming FC_CMD_TIME_OUT status to FC_CMD_RECOVERY to be consistent with new fc_fcp_recovery. Data frames are not expected for an DDPed exchange and potentially it could be tampered data frame, so does recovery in this case by calling fc_fcp_recovery. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Vasu Dev authored
Since use of offloads is more efficient than switching to non-offload EM. However kept logic same to call em_match if it is provided in the list of EMs. Converted fc_exch_alloc to inline being now tiny a function and already not an exported libfc API any more. Signed-off-by:
-
Vasu Dev authored
In some cases seq is incremented twice causing unnecessary seq jump, for instance fc_exch_recv_seq_resp increments seq id when fc_sof_is_init is true and that is true for each incoming xfer ready but then fc_fcp_send_data does another seq increment to send data for xfer ready. This patch removes all such seq id jumps, at least it eliminates few calls to fc_seq_start_next using ex_lock. Also removes seq id update with incoming frame's seq id as this is not needed since each end (I or T) just need to send incremented their own seq id on each TSI from other end & before sending new sequence within a exchange. Signed-off-by:
-
Joe Eykholt authored
When starting a new response sequence in a multi-sequence exchange, a warning was issued that sequence initiative wasn't held. The bug was that sequence initiative was cleared by the previous sequence due to the END_SEQ flag being on. The intent may have been to check LAST_SEQ. Change just to check SEQ_INIT. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
-
Joe Eykholt authored
The link and last_link fields in the fcoe_ctlr struct are no longer useful, since they are always set to the same value, and FIP always calls libfc to pass link information to the lport. Eliminate those fields and rename link_work to timer_work, since it no longer has any link change work to do. Thanks to Brian Uchino for discovering this issue. Signed-off-by:
-
Joe Eykholt authored
Remove an unused variable, mac, in fcoe_recv_frame(). Signed-off-by:
-
Joe Eykholt authored
The method we've been using for point-to-point mode requires that the LS_ACC for the FLOGI uses the D_ID and S_ID assigned to the remote port and local port, not those in the exchange. This is not the correct method, but for now, it's what works with the old target, as well as with new targets based on libfc. This patch changes the addresses used accordingly. Signed-off-by:
-
Joe Eykholt authored
When receiving a FLOGI request from a point-to-point peer, the D_ID of 0xfffffe was not recognized as belonging to one of the lports, so it was dropped. Change fc_vport_id_lookup() to treat d_id 0xfffffe as a match. Signed-off-by:
-
Joe Eykholt authored
In point-to-point mode, we need to save the source MAC from received FLOGI requests to use as the destination MAC for all outgoing frames. We stopped doing that at some point. Use the lport_set_port_id method to catch incoming FLOGI frames and pass them to fcoe_ctlr_recv_flogi() so it can save the source MAC. Signed-off-by:
-
Joe Eykholt authored
The debug message that indicated we are using non-FIP mode was being printed only if we were already in non-FIP mode. Also changed the message text to make it more clear the mode is being set, not that the message is indicating how FLOGI was received. Signed-off-by:
-
Joe Eykholt authored
In point-to-point mode, the destination MAC address for the FLOGI response was zero because the LS_ACC for the FLOGI wasn't getting intercepted by FIP. Change to call fcoe_ctlr_els_send when sending any ELS, not just requests. Signed-off-by:
-
Joe Eykholt authored
In point-to-point mode, if the PLOGI to the remote port times out, it can get deleted by the remote port module. Since there's no reference by the local port, lport->ptp_data points to a freed rport, and when the local port is reset and tries to logout again, an oops occurs in mutex_lock_nested(). Hold a reference count on the point-to-point rdata. Signed-off-by:
-
Joe Eykholt authored
The FCP command header definition should define a mask for the task attribute field. This adds that #define. Signed-off-by:
-
Joe Eykholt authored
Reduce indentation in fc_rport_recv_prli_req() using gotos. Also add payload length checks. Signed-off-by:
-
Richard A Lary authored
This patch replaces incorrect base address space flag with correct IO resource flag. Also, performs check of memory resource to validate resource before using. Signed-off-by:
Richard A Lary <rlary@linux.vnet.ibm.com> Acked-by:
"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by:
-
Julia Lawall authored
The variable bfa_itnim is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Jing Huang <huangj@brocade.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Roel Kluin authored
struct pmcraid_ioctl_header member buffer_length is unsigned, so this check appears redundant. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by:
-
Roel Kluin authored
This allows i == MAXHA, which is out of range Signed-off-by:
-
Julia Lawall authored
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by:
Jack Wang <jack_wang@usish.com> Signed-off-by:
-
Kashyap, Desai authored
external host not connecting after controller reboot: The problem is : devices are not coming back after having the cable disconnected then reconnected. The problem is because the driver/firmware device removal handshake is failing. Due to this failure, the controller firmware is not sending out device add events when the target is reconnected. This is root caused to a race in the driver/firmware device removal algorithm. There is duplicate code in both interrupt and user context; where target reset is being issue from user context path while sas_iounit_control(OP_REMOVE) is being sent from interrupt context. An active target_reset will fail the OP_REMOVE. To fix this problem, the duplicate code has been removed from user context path. Signed-off-by:
-
Kashyap, Desai authored
Upgraded version string. Signed-off-by:
Eric Moore <eric.moore@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
modified _scsih_sas_device_find_by_handle so to handle the search on both list(device list and device_init_list) Also, we moved the priority of the search so the ioc->sas_device_list is done first. The "sas_device_init_list" is only used during the 1st port enable, so its unlikely there’s devices on it. Signed-off-by:
-
Kashyap, Desai authored
Add the cancel_pending_work flag from the fw_event_work structure, and then to set the flag during host reset, check the flag later from work threads context and if cancel_pending_work_flag is set ingore those events. Now Rescan after host reset is changed. Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued at the time of HBA reset. this task is treated as barrier. All work after MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be server by callback handle. If host_recovery is going on while running RESCAN task, it will wait for shos_recovery_done completion which will be called from HBA reset DONE context. Signed-off-by:
-
Hannes Reinecke authored
The rport structure defines dev_loss_tmo as u32, which is later multiplied with HZ to get the actual timeout value. This might overflow for large dev_loss_tmo values. So we should be better using u64 as intermediate variables here to protect against overflow. Signed-off-by:
Hannes Reinecke <hare@suse.de> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
FUJITA Tomonori authored
scsi_dma_map() returns -1 if an error occurred (zero means that the command has no data). So the following current code can't catch an error: sges_left = scsi_dma_map(scmd); if (!sges_left) { sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" " failed: request for %d bytes!\n", scsi_bufflen(scmd)); return -ENOMEM; } Signed-off-by:FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
-
adam radford authored
This patch updates the 3ware maintainers in the MAINTAINERS file. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
adam radford authored
This small patch forces 60 second timeouts for the older 3w-xxxx & 3w-9xxx drivers for systems that don't contain the udev rule for setting scsi timeouts to 60 seconds. Signed-off-by:
-
- 08 Apr, 2010 13 commits
-
-
Jiri Slaby authored
Stanse found that one error path in qla24xx_bsg_timeout omits to unlock ha->hardware_lock. Fix that. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Jiri Slaby authored
Stanse found that two error paths in lpfc_bsg_rport_els_cmp and lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is because they wrongly unlock phba->hbalock instead. Fix that. Signed-off-by:
-
Jiri Slaby authored
Stanse found that one error path in mgmt_invalidate_icds omits to unlock ctrl->mbox_lock. Fix that. Added in 756d29c8 (Enable async mode for mcc rings) where the spinlock was moved. Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Dan Carpenter authored
adpt_i2o_delete_hba() calls kfree() so we have to save "pHba->next" before calling it. Also inside adpt_i2o_delete_hba() itself, there was another use after free bug which I fixed by moving the kfree() down a line. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)
-
Mark Lord authored
Most drives from Seagate, Hitachi, and possibly other brands, do not allow LBA28 access to sector number 0x0fffffff (2^28 - 1). So instead use LBA48 for such accesses. This bug could bite a lot of systems, especially when the user has taken care to align partitions to 4KB boundaries. On misaligned systems, it is less likely to be encountered, since a 4KB read would end at 0x10000000 rather than at 0x0fffffff. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix sched_getaffinity()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Fix IDE taskfile with cfq scheduler ide: Must hold queue lock when requeueing ide: Requeue request after DMA timeout
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / PM: Move ACPI video resume to a PM notifier ACPI: Reduce ACPI resource conflict message to KERN_WARNING, printk cleanup ACPI: battery drivers should call power_supply_changed() ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=n PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 ACPI: Don't send KEY_UNKNOWN for random video notifications ACPI: NUMA: map pxms to low node ids ACPI: use _HID when supplied by root-level devices ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe() ACPI: fixes a false alarm from lockdep ACPI dock: support multiple ACPI dock devices ACPI: EC: Allow multibyte access to EC
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: hvc_console: Fix race between hvc_close and hvc_remove virtio: disable multiport console support. virtio: console makes incorrect assumption about virtio API virtio: console: Fix early_put_chars usage MAINTAINERS: Put the virtio-console entry in correct alphabetical order
-
Anton Blanchard authored
I don't claim to understand the tty layer, but it seems like hvc_open and hvc_close should be balanced in their kref reference counting. Right now we get a kref every call to hvc_open: if (hp->count++ > 0) { tty_kref_get(tty); <----- here spin_unlock_irqrestore(&hp->lock, flags); hvc_kick(); return 0; } /* else count == 0 */ tty->driver_data = hp; hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0 But hvc_close has: tty_kref_get(tty); if (--hp->count == 0) { ... /* Put the ref obtained in hvc_open() */ tty_kref_put(tty); ... } tty_kref_put(tty); Since the outside kref get/put balance we only do a single kref_put when count reaches 0. The patch below changes things to call tty_kref_put once for every hvc_close call, and with that my machine boots fine. Signed-off-by:Anton Blanchard <anton@samba.org> Acked-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au>
-
Michael S. Tsirkin authored
Move MULTIPORT feature and related config changes out of exported headers, and disable the feature at runtime. At this point, it seems less risky to keep code around until we can enable it than rip it out completely. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Rusty Russell authored
The get_buf() API sets the second arg to the number of bytes *written* by the other side; in this case it should be zero as these are output buffers. lguest gets this right (obviously kvm's console doesn't), resulting in continual buildup of console writes. Signed-off-by:
-
