- 14 Feb, 2023 21 commits
-
-
Felix Fietkau authored
Now that all drivers use iTXQ, it does not make sense to check to drop tx forwarding packets when the driver has stopped the queues. fq_codel will take care of dropping packets when the queues fill up Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-3-nbd@nbd.nameSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
The same check is done in multiple places, unify it. Signed-off-by:
-
Felix Fietkau authored
When parsing the outer A-MSDU header, don't check for inner bridge tunnel or RFC1042 headers. This is handled by ieee80211_amsdu_to_8023s already. Signed-off-by:
-
Shayne Chen authored
The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to u16 after being assigned to rate variable, which causes information loss in STA_STATS_FIELD_TYPE and later bitfields. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com Fixes: 41cbb0f5 ("mac80211: add support for HE") Signed-off-by:
-
Bo Liu authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
Bo Liu <liubo03@inspur.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230206081641.3193-1-liubo03@inspur.comSigned-off-by:
-
Rameshkumar Sundaram authored
Currently action frames TX only with ML address as A3(BSSID) are allowed in an ML AP, but TX for a non-ML Station can happen in any link of an ML BSS with link BSS address as A3. In case of an MLD, if User-space has provided a valid link_id in action frame TX request, allow transmission of the frame in that link. Signed-off-by:
Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://lore.kernel.org/r/20230201061602.3918-1-quic_ramess@quicinc.comSigned-off-by:
-
Aloka Dixit authored
- Configure the bitmap in link_conf and notify the driver. - Modify 'change' in ieee80211_start_ap() from u32 to u64 to support BSS_CHANGED_EHT_PUNCTURING. - Propagate the bitmap in channel switch events to userspace. Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by:
Muna Sinada <quic_msinada@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-5-quic_alokad@quicinc.comSigned-off-by:
-
Aloka Dixit authored
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by:
-
Aloka Dixit authored
- New feature flag, NL80211_EXT_FEATURE_PUNCT, to advertise driver support for preamble puncturing in AP mode. - New attribute, NL80211_ATTR_PUNCT_BITMAP, to receive a puncturing bitmap from the userspace during AP bring up (NL80211_CMD_START_AP) and channel switch (NL80211_CMD_CHANNEL_SWITCH) operations. Each bit corresponds to a 20 MHz channel in the operating bandwidth, lowest bit for the lowest channel. Bit set to 1 indicates that the channel is punctured. Higher 16 bits are reserved. - New members added to structures cfg80211_ap_settings and cfg80211_csa_settings to propagate the bitmap to the driver after validation. Signed-off-by:
-
Aloka Dixit authored
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap() and export it. - Modify the prototype to include struct cfg80211_chan_def instead of only bandwidth to support a check which returns false if the primary channel is punctured. Signed-off-by:
-
Jaewan Kim authored
Add an error message to the missing frequency case to have all -EINVAL in nl80211_parse_chandef() return a better error. Signed-off-by:
Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130074514.1560021-1-jaewan@google.com [rewrite commit message] Signed-off-by:
-
Jaewan Kim authored
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming that hold port identifiers portid instead of pid. This change replicates following commit: commit 15e47304 ("netlink: Rename pid to portid to avoid confusion") Signed-off-by:
-
Alvin Šipraga authored
nl80211_send_ap_stopped() can be called multiple times on the same netdev for each link when using Multi-Link Operation. Add the MLO_LINK_ID attribute to the event to allow userspace to distinguish which link the event is for. Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20230128125844.2407135-2-alvin@pqrs.dkSigned-off-by:
-
Alvin Šipraga authored
Userspace processes such as network daemons may wish to be informed when any AP interface is brought up on the system, for example to initiate a (re)configuration of IP settings or to start a DHCP server. Currently nl80211 does not broadcast any such event on its multicast groups, leaving userspace only two options: 1. the process must be the one that actually issued the NL80211_CMD_START_AP request, so that it can react on the response to that request; 2. the process must react to RTM_NEWLINK events indicating a change in carrier state, and may query for further information about the AP and react accordingly. Option (1) is robust, but it does not cover all scenarios. It is easy to imagine a situation where this is not the case (e.g. hostapd + systemd-networkd). Option (2) is not robust, because RTM_NEWLINK events may be silently discarded by the linkwatch logic (cf. linkwatch_fire_event()). Concretely, consider a scenario in which the carrier state flip-flops in the following way: ^ carrier state (high/low = carrier/no carrier) | | _______ _______ ... | | | | | ______| "foo" |____| "bar" (SSID in "quotes") | +-------A-------B----C---------> time If the time interval between (A) and (C) is less than 1 second, then linkwatch may emit only a single RTM_NEWLINK event indicating carrier gain. This is problematic because it is possible that the network configuration that should be applied is a function of the AP's properties such as SSID (cf. SSID= in systemd.network(5)). As illustrated in the above diagram, it may be that the AP with SSID "bar" ends up being configured as though it had SSID "foo". Address the above issue by having nl80211 emit an NL80211_CMD_START_AP message on the MLME nl80211 multicast group. This allows for arbitrary processes to be reliably informed. Signed-off-by:
-
Johannes Berg authored
Handle the Puncturing info received from the AP in the EHT Operation element in beacons. If the info is invalid: - during association: disable EHT connection for the AP - after association: disconnect This commit includes many (internal) bugfixes and spec updates various people. Co-developed-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Veerendranath Jakkam authored
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by:
-
Veerendranath Jakkam authored
Add support for drivers to indicate STA connection(MLO/non-MLO) when user space SME (e.g., hostapd) is not used for MLD AP. Add new parameters in struct station_info to provide below information in cfg80211_new_sta() call: - MLO link ID of the AP, with which station completed (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. - (Re)Association Response IEs sent to the station. User space needs this to determine rejected and accepted affiliated links information of the connected station if the connection is MLO capable. Signed-off-by:
-
Lorenzo Bianconi authored
Move color collision report in a dedicated delayed work and do not run it in interrupt context in order to rate-limit the number of events reported to userspace. Moreover grab wdev mutex in ieee80211_color_collision_detection_work routine since it is required by cfg80211_obss_color_collision_notify(). Tested-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Fixes: 5f9404ab ("mac80211: add support for BSS color change") Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.orgSigned-off-by:
-
Alexander Wetzel authored
Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work. Fixes: fffd0934 ("cfg80211: rework key operation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.deSigned-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by:
-
Veerendranath Jakkam authored
Currently authentication request event interface doesn't have support to indicate the user space whether it should enable MLO or not during the authentication with the specified AP. But driver needs such capability since the connection is MLO or not decided by the driver in case of SME offload to the driver. Add support for driver to indicate MLD address of the AP in authentication offload request to inform user space to enable MLO during authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT flag capability in NL80211_CMD_CONNECT to know whether the user space supports enabling MLO during the authentication offload. User space should enable MLO during the authentication only when it receives the AP MLD address in authentication offload request. User space shouldn't enable MLO if the authentication offload request doesn't indicate the AP MLD address even if the AP is MLO capable. When MLO is enabled, user space should use the MAC address of the interface (on which driver sent request) as self MLD address. User space and driver to use MLD addresses in RA, TA and BSSID fields of the frames between them, and driver translates the MLD addresses to/from link addresses based on the link chosen for the authentication. Signed-off-by:
-
Johannes Berg authored
With %pM, this really is no longer needed, and actually longer to spell out. Remove it. Signed-off-by:
-
- 13 Feb, 2023 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
-
Tom Rix authored
building with W=2 has these errors redundant redeclaration of ‘zd_rf_generic_patch_6m’ [-Werror=redundant-decls] redundant redeclaration of ‘zd_rf_patch_6m_band_edge’ [-Werror=redundant-decls] Remove the second decls. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204200902.1709343-1-trix@redhat.com
-
Ping-Ke Shih authored
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit the value. Compile test only. sparse warnings: (new ones prefixed by >>) >> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |= >> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16 >> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32 Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Tested-by:
Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This is only compile tested. Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This was tested with a cheap "HT-WR813" from Aliexpress. Signed-off-by:
-
Bitterblue Smith authored
By default the LED will blink when there is some activity. This was tested with a TP-Link TL-WN725N. Signed-off-by:
-
Bitterblue Smith authored
If the chip can have an LED, register a struct led_classdev and enable hardware-controlled blinking. When the chip is not transmitting or receiving anything the LED is off. Otherwise the LED will blink faster or slower according to the throughput. The LED can be controlled from userspace by writing 0, 1, or 2 to /sys/class/leds/rtl8xxxu-usbX-Y/brightness: 0 - solid off. 1 - solid on. 2 - hardware-controlled blinking. In this patch none of the chips advertise having an LED. That will be added in the next patches. Signed-off-by:
-
Peter Lafreniere authored
Macros prefixed with CONFIG_ are intended to be defined only by Kconfig scripts. Here we remove the prefix from the CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code. This causes no change to functionality. Signed-off-by:
Peter Lafreniere <peter@n8pjl.ca> Signed-off-by:
-
Zong-Zhe Yang authored
Previously, all supported chips had two RF paths. Therefore, these codes used static number for TX power setting. Now, we are planning to support a new chip which has only one RF path. So, we refine the setting codes to refer to chip's RF path number at runtime. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
For a packet with 1SS rate, it can also transmit via 2 antenna, called 2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately, the mask of 2T and 1T are the same, so it can still work well without this fix. Signed-off-by:
-
Zong-Zhe Yang authored
In path of setting channel and setting TX power, the rtw89_chan instance to be used is controlled by top and passed down. The set_tx_shape_dfir() is in path of setting TX power, so it should use the passed rtw89_chan instead of querying it itself. Otherwise, it might encounter mismatch between parameters if multi-channel. For example, rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz Signed-off-by:
-
Chin-Yen Lee authored
Enable CLKREQ to reduce power consumption for 8852BE. Signed-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type can still work well. The use of this new type is the same as before, so we add new type to avoid taking wrong firmware. Then, driver log can also give clear information about this change: rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 Signed-off-by:
-
Ping-Ke Shih authored
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after 0.29.26.0, and then we have more space to support other features, such as P2P-PS, hardware scan and so on. Signed-off-by:
-
Ping-Ke Shih authored
For different firmware type, it could use different IDMEM mode, so reset it to default to avoid encountering error during we bisect firmware version, like rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 rtw89_8852be 0000:03:00.0: fw security fail rtw89_8852be 0000:03:00.0: download firmware fail rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62 rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 Signed-off-by:
-
Ping-Ke Shih authored
Driver can prepare pkt_list for firmware that only uses them to send out the packets in specific situations. To understand the usage of current status, and to check if there is leakage problem, dump bitmap and the indices used by certain function. An example looks like: map: ... pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... [SCAN 0]: 3 [SCAN 1]: 4 [SCAN 3]: 5 VIF [0] xx:xx:xx:xx:xx:xx ... pkt_ofld[GENERAL]: 0 1 2 Signed-off-by: -
Chin-Yen Lee authored
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by:
-
Chin-Yen Lee authored
When driver fails to send H2C to firmware for pkt-offload, we should not update the pkt_list of driver, and need to release allocated pkt index to avoid wrong mapping between driver and firmware. Signed-off-by:
-
Kuan-Chung Chen authored
Buffer STA on TDLS links are not currently supported. Therefore, it is not allowed to enter the PS mode after TDLS link is established. Signed-off-by:
Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by:
-
