- 21 Apr, 2022 40 commits
-
-
AngeloGioacchino Del Regno authored
This driver uses three clocks and there's no special handling, they're either enabled or disabled sequentially: migrate to the clk_bulk API to simplify clock handling. This patch brings no functional changes. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220404145558.93340-1-angelogioacchino.delregno@collabora.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
周琰杰 (Zhou Yanjie) authored
Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files. Signed-off-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1649964337-114337-4-git-send-email-zhouyanjie@wanyeetech.comSigned-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Acked-by:
Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by:
Dragan Čečavac <dragancecavac@yahoo.com> Signed-off-by:
-
周琰杰 (Zhou Yanjie) authored
Add the dwc2 bindings for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tom Rix authored
Spelling replacements definiton to definition acceptible to acceptable seperately to separately Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220419182142.1805918-1-trix@redhat.comSigned-off-by:
-
Tom Rix authored
Spelling replacements endpiont to endpoint Compliacne to Compliance Signed-off-by:
-
Tom Rix authored
Spelling replacements occured to occurred currenty to currently Signed-off-by:
-
Tom Rix authored
Spelling replacement endpoitn to endpoint Signed-off-by:
-
Tom Rix authored
Spelling replacement reactiviting to reactivating Signed-off-by:
-
Sergey Shtylyov authored
usb_dump_hub_descriptor() and usb_dump_string() are defined under #ifdef PROC_EXTRA (while PROC_EXTRA doesn't seem to have ever been #define'd) since the dawn of the git era -- remove this dead code at last... Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/ec08915b-faf2-2f0b-dfb1-048dfa2c67f3@omp.ruSigned-off-by:
-
Miaoqian Lin authored
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 8934d3e4 ("usb: musb: omap2430: Don't use omap_get_control_dev()") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220309111033.24487-1-linmq006@gmail.comSigned-off-by:
-
Michael Grzeschik authored
Currently the usb side setting of the USB_CDC_REQ_SEND_BREAK control is not supported. This patch adds the support. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220406192914.3302636-1-m.grzeschik@pengutronix.deSigned-off-by:
-
Dan Vacura authored
Improve performance of isoc transfers in superspeed by increasing the number of possible endpoints available, matching that of what was configured for bulk transfers. Signed-off-by:
Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220420183338.445622-1-w36195@motorola.comSigned-off-by:
-
Janusz Krzysztofik authored
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20220402114353.130775-1-jmkrzyszt@gmail.comSigned-off-by:
-
Janusz Krzysztofik authored
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Signed-off-by:
-
Kushagra Verma authored
Two kerneldoc comments in gadget.c have excess function parameter description or wrong prototype name and one kerneldoc comment in core.c has an excess function parameter description, resulting in these three doc-build warnings: 1. ./drivers/usb/dwc3/gadget.c:675: warning: Excess function parameter 'nfifos' description in 'dwc3_gadget_calc_tx_fifo_size' 2. ./drivers/usb/dwc3/gadget.c:700: warning: expecting prototype for dwc3_gadget_clear_tx_fifo_size(). Prototype was for dwc3_gadget_clear_tx_fifos() instead 3. ./drivers/usb/dwc3/core.c:347: warning: Excess function parameter 'ref_clk_per' description in 'dwc3_ref_clk_period' Fix the warnings by correcting the prototype name and removing excess parameter descriptions. Signed-off-by:Kushagra Verma <kushagra765@outlook.com> Link: https://lore.kernel.org/r/SI2PR01MB392995043CACD80884A13764F81C9@SI2PR01MB3929.apcprd01.prod.exchangelabs.comSigned-off-by:
-
Krzysztof Kozlowski authored
"reg" property is required on Samsung S5PV210/Exynos EHCI/OHCI controllers. Fixes: 4bf2283c ("dt-bindings: usb: samsung,exynos-usb2: convert to dtschema") Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220419120827.249627-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Remove parts duplicated with usb-hcd.yaml DT schema and include it directly. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220419121013.250023-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Lin Ma authored
The function rio_karam_init() should return -ENOMEM instead of value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails. Similarly, it should return -EIO when rio_karma_send_command() fails. Fixes: dfe0d3ba ("USB Storage: add rio karma eject support") Acked-by:
Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cnSigned-off-by:
-
Guo Zhengkui authored
Address the following coccicheck warning: drivers/usb/gadget/udc/net2280.c:940:20-21: WARNING opportunity for swap(). drivers/usb/gadget/udc/net2280.c:944:25-26: WARNING opportunity for swap(). by using swap() for the swapping of variable values and drop the tmp variables (`tmp` and `end`) that are not needed any more. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220407100459.3605-1-guozhengkui@vivo.comSigned-off-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/usb/gadget/function/u_audio.c:1182 g_audio_setup() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220407062410.89214-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Zhen Ni authored
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.comSigned-off-by:
-
Minghao Chi authored
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220309053611.2081191-1-chi.minghao@zte.com.cnSigned-off-by:
-
Souradeep Chowdhury authored
Set the default dr_mode for usb2 node to "otg" to enable role-switch for EUD(Embedded USB Debugger) connector node. Signed-off-by:
Souradeep Chowdhury <quic_schowdhu@quicinc.com> Link: https://lore.kernel.org/r/451392a942f90aa9805b00afad7dff894604d189.1649235218.git.quic_schowdhu@quicinc.comSigned-off-by:
-
Souradeep Chowdhury authored
Add the Embedded USB Debugger(EUD) device tree node. The node contains EUD base register region and EUD mode manager register regions along with the interrupt entry. Also add the typec connector node for EUD which is attached to EUD node via port. EUD is also attached to DWC3 node via port. Also add the role-switch property to dwc3 node. Signed-off-by:
-
Lin Ma authored
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> isd200_init_info() That is, the error return of the initFunction should tell USB core what happened instead of using custom error code like ISD200_ERROR. Signed-off-by:
-
Lin Ma authored
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> init_usbat_cd() or init_usbat_flash() -> init_usbat() That is, the error return of the initFunction should tell USB core what happened instead of using constant or error code like USB_STOR_TRANSPORT_FAILED. Signed-off-by:
-
Lin Ma authored
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> init_alauda() That is, the error return of the initFunction should tell USB core what happened instead of using error code like USB_STOR_TRANSPORT_ERROR. Signed-off-by:
-
Christophe Leroy authored
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up in a further step, first clean all files that include asm/prom.h Some files don't need asm/prom.h at all. For those ones, just remove inclusion of asm/prom.h Some files don't need any of the items provided by asm/prom.h, but need some of the headers included by asm/prom.h. For those ones, add the needed headers that are brought by asm/prom.h at the moment, then remove asm/prom.h Some files really need asm/prom.h but also need some of the headers included by asm/prom.h. For those one, leave asm/prom.h but also add the needed headers so that they can be removed from asm/prom.h in a later step. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/295e87a3094a92784657f7060fb0927e762a2e3c.1650011506.git.christophe.leroy@csgroup.euSigned-off-by:
-
Niels Dossche authored
The function documentation of usb_set_configuration says that its callers should hold the device lock. This lock is held for all callsites except tweak_set_configuration_cmd. The code path can be executed for example when attaching a remote USB device. The solution is to surround the call by the device lock. This bug was found using my experimental own-developed static analysis tool, which reported the missing lock on v5.17.2. I manually verified this bug report by doing code review as well. I runtime checked that the required lock is not held. I compiled and runtime tested this on x86_64 with a USB mouse. After applying this patch, my analyser no longer reports this potential bug. Fixes: 2c8c9815 ("staging: usbip: let client choose device configuration") Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Niels Dossche <dossche.niels@gmail.com> Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.comSigned-off-by:
-
Hangyu Hua authored
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails after that, usb_put_dev() needs to be called to release the reference. Fix this by moving usb_put_dev() to sdev_free error path handling. Find this by code review. Fixes: 3ff67445 ("usbip: fix error handling in stub_probe()") Reviewed-by:
Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.comSigned-off-by:
-
Aswath Govindraju authored
In AM62 SoC, the Designware Core USB3 IP is progammed to operate in USB2.0 only mode. Add driver for AM62 USB DWC3 Wrapper. Signed-off-by:
Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220414103211.16202-3-a-govindraju@ti.comSigned-off-by:
-
Aswath Govindraju authored
Add bindings for the TI's AM62 wrapper module for the Synopsys USBSS-DRD controller. Reviewed-by:
-
Guido Günther authored
Instead of refetching power status cache it and only update it when a change is signalled via irq. This simplifies tracing and adding more supply properties in follow up patches. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220317154518.4082046-2-sebastian.krzyszkowiak@puri.smSigned-off-by:
-
Tanveer Alam authored
There are few scenerio when PMC reports 'busy condition' and command fail. If PMC receives a high priority command while servicing a low priority command then it discards the low priority command and start servicing the high priority command. The lower priority command fail and driver returns error. If the same command resend to the PMC then PMC latches the command and service it accordingly. Thus adds the retry logic for the PMC command. Reviewed-by:
Tanveer Alam <tanveer1.alam@intel.com> Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.comSigned-off-by:
-
Michael Grzeschik authored
The exit condition to quit iterating over the sg_list, while encoding the sg entries, has to consider the case that the dma_len of the entry could be zero. This patch takes this condition to account. Signed-off-by:
-
Michael Grzeschik authored
On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned to early. Only after the last usb_request worked with the buffer it is allowed to give it back to vb2. This patch fixes that. Signed-off-by:
-
Michael Grzeschik authored
The function uvcg_queue_next_buffer is used different than its name suggests. The return value nextbuf is never used by any caller. This patch reworks the function to its actual purpose, by removing the unused code and renaming it. The function name uvcg_complete_buffer makes it more clear that it is actually marking the current video buffer as complete. Signed-off-by:
-
Dan Vacura authored
The pause flag doesn't appear to serve a purpose as it is possible for the pump worker thread to not be running when new buffers are queued. Before the following change was introduced: "43cd0023 usb: gadget: uvc_video: add worker to handle the frame pumping", the pause flag status was discarded and never returned. This masked a current issues of the userspace receiving non-zero values (considered unsuccessful) and prevents trace_v4l2_qbuf() from being called. Signed-off-by:
-
Dan Vacura authored
Add a configfs entry, "function_name", to change the iInterface field for VideoControl. This name is used on host devices for user selection, useful when multiple cameras are present. The default will remain "UVC Camera". Signed-off-by:
-
