- 25 Sep, 2018 3 commits
-
-
Parav Pandit authored
Currently add_modify_gid() for IB link layer has followong issue in cache update path. When GID update event occurs, core releases reference to the GID table without updating its state and/or entry pointer. CPU-0 CPU-1 ------ ----- ib_cache_update() IPoIB ULP add_modify_gid() [..] put_gid_entry() refcnt = 0, but state = valid, entry is valid. (work item is not yet executed). ipoib_create_ah() rdma_create_ah() rdma_get_gid_attr() <-- Tries to acquire gid_attr which has refcnt = 0. This is incorrect. GID entry state and entry pointer is provides the accurate GID enty state. Such fields must be updated with rwlock to protect against readers and, such fields must be in sane state before refcount can drop to zero. Otherwise above race condition can happen leading to use-after-free situation. Following backtrace has been observed when cache update for an IB port is triggered while IPoIB ULP is creating an AH. Therefore, when updating GID entry, first mark a valid entry as invalid through state and set the barrier so that no callers can acquired the GID entry, followed by release reference to it. refcount_t: increment on 0; use-after-free. WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:refcount_inc_checked+0x30/0x50 RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100 RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8 R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202 FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0 IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready Call Trace: rdma_get_gid_attr+0x220/0x310 [ib_core] ? lock_acquire+0x145/0x3a0 rdma_fill_sgid_attr+0x32c/0x470 [ib_core] rdma_create_ah+0x89/0x160 [ib_core] ? rdma_fill_sgid_attr+0x470/0x470 [ib_core] ? ipoib_create_ah+0x52/0x260 [ib_ipoib] ipoib_create_ah+0xf5/0x260 [ib_ipoib] ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib] Fixes: b150c386 ("IB/core: Introduce GID entry reference counts") Signed-off-by:Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Yishai Hadas authored
Upon DEVX object creation the object must be destroyed upon a follows error flow. Fixes: 7efce369 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Mark Bloch authored
Make sure we free struct uverbs_api once we clean the radix tree. It was allocated by uverbs_alloc_api(). Fixes: 9ed3e5f4 ("IB/uverbs: Build the specs into a radix tree at runtime") Reported-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
- 24 Sep, 2018 1 commit
-
-
Selvin Xavier authored
bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b103 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
- 21 Sep, 2018 4 commits
-
-
Michael J. Ruhl authored
rvt_destroy_qp() cannot complete until all in process packets have been released from the underlying hardware. If a link down event occurs, an application can hang with a kernel stack similar to: cat /proc/<app PID>/stack quiesce_qp+0x178/0x250 [hfi1] rvt_reset_qp+0x23d/0x400 [rdmavt] rvt_destroy_qp+0x69/0x210 [rdmavt] ib_destroy_qp+0xba/0x1c0 [ib_core] nvme_rdma_destroy_queue_ib+0x46/0x80 [nvme_rdma] nvme_rdma_free_queue+0x3c/0xd0 [nvme_rdma] nvme_rdma_destroy_io_queues+0x88/0xd0 [nvme_rdma] nvme_rdma_error_recovery_work+0x52/0xf0 [nvme_rdma] process_one_work+0x17a/0x440 worker_thread+0x126/0x3c0 kthread+0xcf/0xe0 ret_from_fork+0x58/0x90 0xffffffffffffffff quiesce_qp() waits until all outstanding packets have been freed. This wait should be momentary. During a link down event, the cleanup handling does not ensure that all packets caught by the link down are flushed properly. This is caused by the fact that the freeze path and the link down event is handled the same. This is not correct. The freeze path waits until the HFI is unfrozen and then restarts PIO. A link down is not a freeze event. The link down path cannot restart the PIO until link is restored. If the PIO path is restarted before the link comes up, the application (QP) using the PIO path will hang (until link is restored). Fix by separating the linkdown path from the freeze path and use the link down path for link down events. Close a race condition sc_disable() by acquiring both the progress and release locks. Close a race condition in sc_stop() by moving the setting of the flag bits under the alloc lock. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290 [<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1] [<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0 [<ffffffffa001bede>] do_readv_writev+0xce/0x260 [<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20 [<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0 [<ffffffffa001c105>] vfs_writev+0x35/0x60 [<ffffffffa001c2bf>] SyS_writev+0x7f/0x110 [<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP <ffff8b2ed1f9bab0> CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
-
Ira Weiny authored
The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 77241056 ("IB/hfi1: add driver files") Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
- 20 Sep, 2018 1 commit
-
-
Majd Dibbiny authored
Uverbs shouldn't enforce QP state in the command unless the user set the QP state bit in the attribute mask. In addition, only copy qp attr fields which have the corresponding bit set in the attribute mask over to the internal attr structure. Fixes: 88de869b ("RDMA/uverbs: Ensure validity of current QP state value") Fixes: bc38a6ab ("[PATCH] IB uverbs: core implementation") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
- 19 Sep, 2018 1 commit
-
-
Bart Van Assche authored
Use different loop variables for the inner and outer loop. This avoids that an infinite loop occurs if there are more RDMA channels than target->req_ring_size. Fixes: d92c0da7 ("IB/srp: Add multichannel support") Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 13 Sep, 2018 1 commit
-
-
Cong Wang authored
There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by:Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Doug Ledford <dledford@redhat.com>
-
- 12 Sep, 2018 1 commit
-
-
Steve Wise authored
Currently a uverbs completion event queue is flushed of events in ib_uverbs_comp_event_close() with the queue spinlock held and then released. Yet setting ev_queue->is_closed is not set until later in uverbs_hot_unplug_completion_event_file(). In between the time ib_uverbs_comp_event_close() releases the lock and uverbs_hot_unplug_completion_event_file() acquires the lock, a completion event can arrive and be inserted into the event queue by ib_uverbs_comp_handler(). This can cause a "double add" list_add warning or crash depending on the kernel configuration, or a memory leak because the event is never dequeued since the queue is already closed down. So add setting ev_queue->is_closed = 1 to ib_uverbs_comp_event_close(). Cc: stable@vger.kernel.org Fixes: 1e7710f3 ("IB/core: Change completion channel to use the reworked objects schema") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
- 11 Sep, 2018 1 commit
-
-
Steve Wise authored
Remove the incorrect WR_HDR field which can cause a misinterpretation of ABORT CPL by ULDs, such as iw_cxgb4. Fixes: a3cdaa69 ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by:
-
- 06 Sep, 2018 2 commits
-
-
Leon Romanovsky authored
In calculating the global maximum number of the Scatter/Gather elements supported, the following four maximum parameters must be taken into consideration: max_sg_rq, max_sg_sq, max_desc_sz_rq and max_desc_sz_sq. However instead of bringing this complexity to query_device, which still won't be sufficient anyway (the calculations are dependent on QP type), the safer approach will be to restore old code, which will give us 32 SGEs. Fixes: 33023fb8 ("IB/core: add max_send_sge and max_recv_sge attributes") Reported-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Parav Pandit authored
When AF_IB addresses are used during rdma_resolve_addr() a lock is not held. A cma device can get removed while list traversal is in progress which may lead to crash. ie CPU0 CPU1 ==== ==== rdma_resolve_addr() cma_resolve_ib_dev() list_for_each() cma_remove_one() cur_dev->device mutex_lock(&lock) list_del(); mutex_unlock(&lock); cma_process_remove(); Therefore, hold a lock while traversing the list which avoids such situation. Cc: <stable@vger.kernel.org> # 3.10 Fixes: f17df3b0 ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()") Signed-off-by:Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
- 05 Sep, 2018 3 commits
-
-
Parav Pandit authored
If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap. Fixes: 7d96c9b1 ("IB/uverbs: Have the core code create the uverbs_root_spec") Signed-off-by:
-
Somnath Kotur authored
1. DMA-able memory allocated for Shadow QP was not being freed. 2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was erroneously pointing to the RQ. But since the corresponding free_qp_hdr_buf() was correct, memory being free was less than what was allocated. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Aaron Knister authored
Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by:Aaron Knister <aaron.s.knister@nasa.gov> Tested-by:
-
- 04 Sep, 2018 3 commits
-
-
Steve Wise authored
Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by:
-
Artemy Kovalyov authored
The object lock was supposed to always be released during destroy, but when the destruction retry series was integrated with the destroy series it created a failure path that missed the unlock. Keep with convention, if destroy fails the caller must undo all locking. Fixes: 87ad80ab ("IB/uverbs: Consolidate uobject destruction") Signed-off-by:
-
Jann Horn authored
The current code grabs the private_data of whatever file descriptor userspace has supplied and implicitly casts it to a `struct ucma_file *`, potentially causing a type confusion. This is probably fine in practice because the pointer is only used for comparisons, it is never actually dereferenced; and even in the comparisons, it is unlikely that a file from another filesystem would have a ->private_data pointer that happens to also be valid in this context. But ->private_data is not always guaranteed to be a valid pointer to an object owned by the file's filesystem; for example, some filesystems just cram numbers in there. Check the type of the supplied file descriptor to be safe, analogous to how other places in the kernel do it. Fixes: 88314e4d ("RDMA/cma: add support for rdma_migrate_id()") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
- 02 Sep, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: "A couple of new helper functions in preparation for some tree wide clean-ups. I'm sending these new helpers now for rc2 in order to simplify the dependencies on subsequent cleanups across the tree in 4.20" * tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add device_type access helper functions of: add node name compare helper functions of: add helper to lookup compatible child node
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "First batch of fixes post-merge window: - A handful of devicetree changes for i.MX2{3,8} to change over to new panel bindings. The platforms were moved from legacy framebuffers to DRM and some development board panels hadn't yet been converted. - OMAP fixes related to ti-sysc driver conversion fallout, fixing some register offsets, no_console_suspend fixes, etc. - Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge. - Fixed 0755->0644 permissions on a newly added file. - Defconfig changes to make ARM Versatile more useful with QEMU (helps testing). - Enable defconfig options for new TI SoC platform that was merged this window (AM6)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: Enable TI's AM6 SoC platform ARM: defconfig: Update the ARM Versatile defconfig ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: dts: imx23-evk: Convert to the new display bindings ARM: dts: imx23-evk: Move regulators outside simple-bus ARM: dts: imx28-evk: Convert to the new display bindings ARM: dts: imx28-evk: Move regulators outside simple-bus Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Speculation: - Make the microcode check more robust - Make the L1TF memory limit depend on the internal cache physical address space and not on the CPUID advertised physical address space, which might be significantly smaller. This avoids disabling L1TF on machines which utilize the full physical address space. - Fix the GDT mapping for EFI calls on 32bit PTI - Fix the MCE nospec implementation to prevent #GP Fixes and robustness: - Use the proper operand order for LSL in the VDSO - Prevent NMI uaccess race against CR3 switching - Add a lockdep check to verify that text_mutex is held in text_poke() functions - Repair the fallout of giving native_restore_fl() a prototype - Prevent kernel memory dumps based on usermode RIP - Wipe KASAN shadow stack before rewinding the stack to prevent false positives - Move the AMS GOTO enforcement to the actual build stage to allow user API header extraction without a compiler - Fix a section mismatch introduced by the on demand VDSO mapping change Miscellaneous: - Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Fix section mismatch warning/error x86/vdso: Fix lsl operand order x86/mce: Fix set_mce_nospec() to avoid #GP fault x86/efi: Load fixmap GDT in efi_call_phys_epilog() x86/nmi: Fix NMI uaccess race against CR3 switching x86: Allow generating user-space headers without a compiler x86/dumpstack: Don't dump kernel memory based on usermode RIP x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember() x86/alternatives: Lockdep-enforce text_mutex in text_poke*() x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit() x86/irqflags: Mark native_restore_fl extern inline x86/build: Remove jump label quirk for GCC older than 4.5.2 x86/Kconfig: Fix trivial typo x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+ x86/spectre: Add missing family 6 check to microcode check -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug fix from Thomas Gleixner: "Remove the stale skip_onerr member from the hotplug states" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "A small set of updates for core code: - Prevent tracing in functions which are called from trace patching via stop_machine() to prevent executing half patched function trace entries. - Remove old GCC workarounds - Remove pointless includes of notifier.h" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove workaround for unreachable warnings from old GCC notifier: Remove notifier header file wherever not used watchdog: Mark watchdog touch functions as notrace -
Randy Dunlap authored
Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea5 ("x86/pti: Map the vsyscall page if needed") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
-
Olof Johansson authored
Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants against v4.19-rc1 These are mostly fixes related to using ti-sysc interconnect target module driver for accessing right register offsets for sgx and cpsw and for no_console_suspend regression. There is also a droid4 emmc fix where emmc may not get detected for some models, and vibrator dts mismerge fix. And we have a file permission fix for am335x-osd3358-sm-red.dts that just got added. And we must tag RTC as system-power-controller for am437x for PMIC to shut down during poweroff. * tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 01 Sep, 2018 4 commits
-
-
Samuel Neves authored
In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540 ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by:
Samuel Neves <sneves@dei.uc.pt> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixlet from Wim Van Sebroeck: "Document support for r8a774a1" * tag 'linux-watchdog-4.19-rc2' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: renesas-wdt: Document r8a774a1 support
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two small fixes, one for the x86 Stoney SoC to get a more accurate clk frequency and the other to fix a bad allocation in the Nuvoton NPCM7XX driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: x86: Set default parent to 48Mhz clk: npcm7xx: fix memory allocation
-
LuckTony authored
The trick with flipping bit 63 to avoid loading the address of the 1:1 mapping of the poisoned page while the 1:1 map is updated used to work when unmapping the page. But it falls down horribly when attempting to directly set the page as uncacheable. The problem is that when the cache mode is changed to uncachable, the pages needs to be flushed from the cache first. But the decoy address is non-canonical due to bit 63 flipped, and the CLFLUSH instruction throws a #GP fault. Add code to change_page_attr_set_clr() to fix the address before calling flush. Fixes: 284ce401 ("x86/memory_failure: Introduce {set, clear}_mce_nospec()") Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
- 31 Aug, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "A few arm64 fixes came in this week, specifically fixing some nasty truncation of return values from firmware calls and resolving a VM_BUG_ON due to accessing uninitialised struct pages corresponding to NOMAP pages. Summary: - Fix typos in SVE documentation - Fix type-checking and implicit truncation for SMCCC calls - Force CONFIG_HOLES_IN_ZONE=y so that SLAB doesn't fall over NOMAP regions" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: always enable CONFIG_HOLES_IN_ZONE arm/arm64: smccc-1.1: Handle function result as parameters arm/arm64: smccc-1.1: Make return values unsigned long Documentation/arm64/sve: Couple of improvements and typos -
Joerg Roedel authored
When PTI is enabled on x86-32 the kernel uses the GDT mapped in the fixmap for the simple reason that this address is also mapped for user-space. The efi_call_phys_prolog()/efi_call_phys_epilog() wrappers change the GDT to call EFI runtime services and switch back to the kernel GDT when they return. But the switch-back uses the writable GDT, not the fixmap GDT. When that happened and and the CPU returns to user-space it switches to the user %cr3 and tries to restore user segment registers. This fails because the writable GDT is not mapped in the user page-table, and without a GDT the fault handlers also can't be launched. The result is a triple fault and reboot of the machine. Fix that by restoring the GDT back to the fixmap GDT which is also mapped in the user page-table. Fixes: 7757d607 x86/pti: ('Allow CONFIG_PAGE_TABLE_ISOLATION for x86_32') Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - minor cleanup avoiding a warning when building with new gcc - a patch to add a new sysfs node for Xen frontend/backend drivers to make it easier to obtain the state of a pv device - two fixes for 32-bit pv-guests to avoid intermediate L1TF vulnerable PTEs * tag 'for-linus-4.19b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove redundant variable save_pud xen: export device state to sysfs x86/pae: use 64 bit atomic xchg function in native_ptep_get_and_clear x86/xen: don't write ptes directly in 32-bit PV guests
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fix from Geert Uytterhoeven: "Just a single fix for a bug introduced during the merge window: fix wrong date and time on PMU-based Macs" * tag 'm68k-for-v4.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Use correct PMU response format
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: - regression fixes for i801 and designware - better API and leak fix for releasing DMA safe buffers - better greppable strings for the bitbang algorithm * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: fix leak when using DMA bounce buffer i2c: sh_mobile: define start_ch() void as it only returns 0 anyhow i2c: refactor function to release a DMA safe buffer i2c: algos: bit: make the error messages grepable i2c: designware: Re-init controllers with pm_disabled set on resume i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus
-
Andy Lutomirski authored
A NMI can hit in the middle of context switching or in the middle of switch_mm_irqs_off(). In either case, CR3 might not match current->mm, which could cause copy_from_user_nmi() and friends to read the wrong memory. Fix it by adding a new nmi_uaccess_okay() helper and checking it in copy_from_user_nmi() and in __copy_from_user_nmi()'s callers. Signed-off-by:
Rik van Riel <riel@surriel.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/dd956eba16646fd0b15c3c0741269dfd84452dac.1535557289.git.luto@kernel.org
-
Ben Hutchings authored
When bootstrapping an architecture, it's usual to generate the kernel's user-space headers (make headers_install) before building a compiler. Move the compiler check (for asm goto support) to the archprepare target so that it is only done when building code for the target. Fixes: e501ce95 ("x86: Force asm-goto") Reported-by:
Helmut Grohne <helmutg@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
