- 23 Jul, 2020 1 commit
-
-
Harsha Priya authored
kabylake_ssp_fixup function uses snd_soc_dpcm to identify the codecs DAIs. The HW parameters are changed based on the codec DAI of the stream. The earlier approach to get snd_soc_dpcm was using container_of() macro on snd_pcm_hw_params. The structures have been modified over time and snd_soc_dpcm does not have snd_pcm_hw_params as a reference but as a copy. This causes the current driver to crash when used. This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime holds 2 dpcm instances (one for playback and one for capture). 2 codecs on the SSP are dmic (capture) and speakers (playback). Based on the stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime. Tested for all use cases of the driver. Signed-off-by:
Harsha Priya <harshapriya.n@intel.com> Signed-off-by:
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com> Tested-by:
Lukasz Majczak <lma@semihalf.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/1595432147-11166-1-git-send-email-harshapriya.n@intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 22 Jul, 2020 1 commit
-
-
Kai Vehmanen authored
Starting in commit cbc7a6b5 ("ASoC: soc-card: add snd_soc_card_add_dai_link()"), error value from ASoc add_dai_link() is no longer ignored. The generic HDA machine driver relied on the old semantics to disable i915 HDMI/DP audio codec at runtime. If no display codec was present, add_dai_link() returned an error, but this was ignored and rest of the card was successfully probed. Fix the problem by changing the machine driver add_dai_link() to not return an error in this case. Fixes: cbc7a6b5 ("ASoC: soc-card: add snd_soc_card_add_dai_link()") Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> BugLink: https://github.com/thesofproject/linux/issues/2261 Link: https://lore.kernel.org/r/20200714132804.3638221-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
- 21 Jul, 2020 1 commit
-
-
Tzung-Bi Shih authored
Partially reverts commit 128f825a ("ASoC: max98357a: move control of SD_MODE to DAPM"). In order to have mute control of max98357 from machine drivers, commit 128f825a ("ASoC: max98357a: move control of SD_MODE to DAPM") moves the control of SD_MODE from DAI ops to DAPM events. However, pop noise has been observed on rk3399-gru-kevin boards due to this commit. The commit 128f825a caused sequence of DAI clocks and SD_MODE changed on rk3399-gru-kevin boards. With the commit 128f825a: - SD_MODE will be set to 1 before DAI clocks start. - SD_MODE will be set to 0 after DAI clocks stop. As a result, pop noise. Moves the control of SD_MODE back to DAI ops. In the meantime, uses an additional flag in DAPM event to provide chance of mute control for machine drivers. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Tested-By:
Alper Nebi Yasak <alpernebiyasak@gmail.com> Link: https://lore.kernel.org/r/20200721114232.2812254-1-tzungbi@google.comSigned-off-by:
-
- 20 Jul, 2020 3 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b543 -- 2.25.1
-
Hauke Mehrtens authored
The lantiq-ssc driver uses internally an own workqueue to wait till the data is not only written out of the FIFO but really written to the wire. This workqueue is flushed while the SPI subsystem is working in some other system workqueue. The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag too to prevent this warning. This fixes the following warning: [ 2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184 [ 2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0 Fixes: 891b7c5f ("mtd_blkdevs: convert to blk-mq") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.deSigned-off-by:
-
Libin Yang authored
This configuration is for EHL with the RT5660 codec. RT5660 should use "10EC5660" ID instead of "INTC1027". Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-7-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
- 17 Jul, 2020 1 commit
-
-
Jing Xiangfeng authored
axg_card_add_tdm_loopback() misses to call kfree() in an error path. We can use devm_kasprintf() to fix the issue, also improve maintainability. So use it instead. Fixes: c84836d7 ("ASoC: meson: axg-card: use modern dai_link style") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200717082242.130627-1-jingxiangfeng@huawei.comSigned-off-by:
-
- 16 Jul, 2020 2 commits
-
-
Oder Chiou authored
The irq work will be manipulated by resume function, and it will report the wrong jack type while the jack type is headphone in the button event. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200716030123.27122-1-oder_chiou@realtek.comSigned-off-by:
-
Jing Xiangfeng authored
snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error path. Add the missed function call to fix it. Fixes: ba49cf6f ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
- 14 Jul, 2020 1 commit
-
-
derek.fang authored
Enable Vref2 under long term using PLL2 to avoid clock unstable. Signed-off-by:
derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1594721600-29994-1-git-send-email-derek.fang@realtek.comSigned-off-by:
-
- 09 Jul, 2020 3 commits
-
-
Shuming Fan authored
The HV/VREF should not turn off if the headphone jack plug-in. This patch could solve the unexpected interrupt issue in some devices. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Tested-by:
-
Puyou Lu authored
In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie. inverted frame clock is not support in this mode). Signed-off-by:
Puyou Lu <puyou.lu@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.comSigned-off-by:
-
Puyou Lu authored
Clear BIT6 of INPPGA means not muted (Switch On). Signed-off-by:
-
- 08 Jul, 2020 11 commits
-
-
Mark Brown authored
Merge series "ASoC: more fixes for dpcm checks" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This is hopefully the last set of fixes to avoid probe errors due to stricter checks of DAI capabilities introduced late in the 5.8 cycle. Daniel Baluta (1): ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M Pierre-Louis Bossart (2): ASoC: soc-dai: set dai_link dpcm_ flags with a helper ASoC: Intel: bdw-rt5677: fix non BE conversion include/sound/soc-dai.h | 1 + sound/soc/generic/audio-graph-card.c | 4 +-- sound/soc/generic/simple-card.c | 4 +-- sound/soc/intel/boards/bdw-rt5677.c | 1 + sound/soc/soc-dai.c | 38 ++++++++++++++++++++++++++++ sound/soc/sof/imx/imx8.c | 8 ++++++ sound/soc/sof/imx/imx8m.c | 8 ++++++ 7 files changed, 60 insertions(+), 4 deletions(-) base-commit: a5911ac5 -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: topology: fix error handling flow" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: While experimenting and introducing errors in Baytrail topology files until I got them right, I encountered multiple kernel oopses and memory leaks. This is a first batch to harden the code, but we should probably think of a tool to fuzz the topology... Pierre-Louis Bossart (5): ASoC: topology: fix kernel oops on route addition error ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: use break on errors, not continue ASoC: topology: factor kfree(se) in error handling ASoC: topology: add more logs when topology load fails. sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 39 deletions(-) base-commit: a5911ac5 -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: codecs: add MAX98373 Soundwire driver" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: V2 with a number of cleanups: split between I2C and SoundWire modes, as done for rt5682, and updated Kconfigs. removed useless initializations common to both modes removed idle_bias on fixed register classified as volatile in error fixed SPDX comments Pierre-Louis Bossart (2): ASoC: codecs: max98373: split I2C and common parts ASoC: Intel: sof-sdw: add MAX98373 I2C dependencies Ryan Lee (2): ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: codecs: max98373: add SoundWire support randerwang (2): ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: Intel: sdw_max98373: add card_late_probe support sound/soc/codecs/Kconfig | 20 +- sound/soc/codecs/Makefile | 4 + sound/soc/codecs/max98373-i2c.c | 612 +++++++++++++++ sound/soc/codecs/max98373-sdw.c | 887 ++++++++++++++++++++++ sound/soc/codecs/max98373-sdw.h | 72 ++ sound/soc/codecs/max98373.c | 619 +-------------- sound/soc/codecs/max98373.h | 17 +- sound/soc/intel/boards/Kconfig | 7 +- sound/soc/intel/boards/sof_sdw.c | 19 +- sound/soc/intel/boards/sof_sdw_common.h | 6 + sound/soc/intel/boards/sof_sdw_max98373.c | 12 + 11 files changed, 1668 insertions(+), 607 deletions(-) create mode 100644 sound/soc/codecs/max98373-i2c.c create mode 100644 sound/soc/codecs/max98373-sdw.c create mode 100644 sound/soc/codecs/max98373-sdw.h base-commit: a5911ac5 -- 2.25.1 -
Ranjani Sridharan authored
The DSP should be notified for device removal only if the probe was successful. Fixes the following KASAN bug: BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof] Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
randerwang authored
Idle_bias_on is used to decide bias on/off in standby state by dapm. When Idle_bias_on is set to one, dapm will keep max98373 active at idle time. Max98373 is doing nothing in this state, so remove idle_bias_on setting to let max98373 get suspended when it is idle. Signed-off-by:
Ryan Lee <ryans.lee@maximintegrated.com> Reviewed-by:
-
Ryan Lee authored
Volume control in probe function is not necessary. Signed-off-by:
-
Pierre-Louis Bossart authored
we need to free all allocated tlvs, not just the one allocated in the loop before releasing kcontrols - other the tlvs references will leak. Fixes: 9f90af3a ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow') Signed-off-by:
-
Pierre-Louis Bossart authored
When errors happens while loading graph components, the kernel oopses while trying to remove all topology components. This can be root-caused to a list pointing to memory that was already freed on error. remove_route() is already called on errors and will perform the required cleanups so there's no need to free the route memory in soc_tplg_dapm_graph_elems_load() if the route was added to the list. We do however want to free the routes allocated but not added to the list. Fixes: 7df04ea7 ('ASoC: topology: modify dapm route loading routine and add dapm route unloading') Signed-off-by:
-
Daniel Baluta authored
This is identical with change for Intel platforms done with commit 8c05246c ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell") and fixes a regression on i.MX8/i.MX8M: [ 25.705750] esai-Codec: ASoC: no backend playback stream [ 27.923378] esai-Codec: ASoC: no users playback at close - state This is root-caused to the introduction of the DAI capability checks with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a requirement for all DAIs to report at least a non-zero min_channels field. Fixes: 9b5db059 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Pierre-Louis Bossart authored
When SOF is used, the normal links are converted into DPCM ones. This generates an error [ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd Wake on Voice does not support playback [ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on Voice :-22 Fix by forcing the capture direction. Fixes: b73287f0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by:
Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add a helper to walk through all the DAIs and set dpcm_playback and dpcm_capture flags based on the DAIs capabilities, and use this helper to avoid setting these flags arbitrarily in generic cards. The commit referenced in the Fixes tag did not introduce the configuration issue but will prevent the card from probing when detecting invalid configurations. Fixes: b73287f0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by:
-
- 07 Jul, 2020 2 commits
-
-
Nicolin Chen authored
Add Shengjiu who's actively working on the latest fsl/nxp audio drivers. Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20200707045829.10002-1-nicoleotsuka@gmail.comSigned-off-by:
-
Maxime Ripard authored
The ASoC devm_ functions that register a component (devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will clean their component by running snd_soc_unregister_component. snd_soc_unregister_component will then remove all the components for the device that was used to register the component in the first place. However, some drivers register several components (such as a DAI and a dmaengine PCM) on the same device, and if the dmaengine PCM is registered first, then the DAI will be cleaned up first and snd_dmaengine_pcm_unregister will be called next. snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component on the device, and if there's one unregister that component and release its dmaengine channels. That doesn't happen in practice though since the first call to snd_soc_unregister_component removed all the components, so we never get the chance to release the dmaengine channels. In order to fix this, instead of removing all the components for a given device, we can simply remove the component that was registered in the first place. We should have the same number of component registration than we have components, so it should work just fine. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.techSigned-off-by:
-
- 03 Jul, 2020 1 commit
-
-
Nicolas Ferre authored
I hand over the maintenance of these drivers to my colleagues. Claudiu, Codrin and Tudor already have experience with these controllers and sub-systems. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200702134224.3750-1-nicolas.ferre@microchip.comSigned-off-by:
-
- 02 Jul, 2020 1 commit
-
-
Fabio Estevam authored
The following build warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property Fix them all. Signed-off-by:
-
- 01 Jul, 2020 3 commits
-
-
Yu-Hsuan Hsu authored
S8 and S24 formats does not work on this machine driver so force to use S16_LE instead. In addition, add constraint to limit the max value of rate because the rate higher than 96000(172000, 192000) is not stable either. Signed-off-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org> Link: https://lore.kernel.org/r/20200630091615.4020059-1-yuhsuan@chromium.orgSigned-off-by:
-
Ravulapati Vishnu vardhan rao authored
When snd_pci_acp3x driver loads we see: WARNING kernel:snd_pci_acp3x 0000:04:00.5: Unbalanced pm_runtime_enable! at boot time. same can be observed in /var/log/messages/. Modifying pm runtime sequence for fixing unbalanced pm issue. Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20200630092242.7799-1-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by:
-
Oder Chiou authored
Base on https://patchwork.kernel.org/patch/11237953/ Soundwire mode also should follow it. Signed-off-by:
-
- 29 Jun, 2020 5 commits
-
-
Hans de Goede authored
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Signed-off-by:
-
Hans de Goede authored
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock. Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is actually used to enable the amplifier for these speakers (the IRQ to the CPU comes directly from the jack-detect switch). Add a quirk for having an ext speaker-amplifier enable pin on GPIO1 and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external speaker-amplifier as necessary. Also update the ident field for the dmi_system_id table entry, the Miix models are not Thinkpads. Fixes: 67e03ff3 ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk") Signed-off-by:
-
Hans de Goede authored
The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage, so the correct mask is 0x7 not 0x3. Because of this wrong mask we were programming the ldo bits to a setting of binary 001 (0x05 & 0x03) instead of binary 101 when moving to SND_SOC_BIAS_PREPARE. According to the datasheet 001 is a reserved value, so no idea what it did, since the driver was working fine before I guess we got lucky and it does something which is ok. Fixes: 5e8351de ("ASoC: add RT5670 CODEC driver") Signed-off-by:
-
Hans de Goede authored
The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards. One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S. Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound. Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere. This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel. This change has been tested on the following devices with a rt5672 codec: Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1) Signed-off-by:
-
Geert Uytterhoeven authored
When building on allyesconfig kernel for a NO_DMA=y platform (e.g. Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n, leading to a link failure: sound/soc/qcom/common.o: In function `qcom_snd_parse_of': common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port' While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845 don't, so the following warning is seen: WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n] Selected by [y]: - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y] Until recently, this warning was harmless (from a compile-testing point-of-view), but the new user of q6afe_is_rx_port() turned this into a hard failure. As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is safe to increase compile testing coverage. Hence fix the link failure by dropping the HAS_DMA dependency of SND_SOC_QDSP6. Fixes: a2120089 ("ASoC: qcom: common: set correct directions for dailinks") Fixes: 6b1687bf ("ASoC: qcom: add sdm845 sound card support") Fixes: a6f933f6 ("ASoC: qcom: apq8096: Add db820c machine driver") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.orgSigned-off-by:
-
- 25 Jun, 2020 1 commit
-
-
Jaroslav Kysela authored
Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Mark Brown <broonie@kernel.org> Cc: vijendar.mukunda@amd.com Cc: Alexander.Deucher@amd.com Link: https://lore.kernel.org/r/20200625115829.791750-1-perex@perex.czSigned-off-by:
-
- 24 Jun, 2020 1 commit
-
-
Shuming Fan authored
To turn the headphone output switch off during jack type detection, it could avoid the pop noise when jack type switches to OMTP type. Signed-off-by:
-
- 23 Jun, 2020 2 commits
-
-
Shengjiu Wang authored
Fix unchecked return value for clk_prepare_enable, add error handler in fsl_mqs_runtime_resume. Fixes: 9e28f653 ("ASoC: fsl_mqs: Add MQS component driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
-
Shengjiu Wang authored
Because clk_prepare_enable and clk_disable_unprepare should check input clock parameter is NULL or not internally, then we don't need to check them before calling the function. Fixes: 9e28f653 ("ASoC: fsl_mqs: Add MQS component driver") Signed-off-by:
-
