- 14 Dec, 2019 4 commits
-
-
Eric Dumazet authored
We got another syzbot report [1] that tells us we must use write_lock_irq()/write_unlock_irq() to avoid possible deadlock. [1] WARNING: inconsistent lock state 5.5.0-rc1-syzkaller #0 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage. syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes: ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 {HARDIRQ-ON-W} state was registered at: lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline] _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319 sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657 tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489 tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585 tiocsetd drivers/tty/tty_io.c:2337 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597 vfs_ioctl fs/ioctl.c:47 [inline] file_ioctl fs/ioctl.c:545 [inline] do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732 ksys_ioctl+0xab/0xd0 fs/ioctl.c:749 __do_sys_ioctl fs/ioctl.c:756 [inline] __se_sys_ioctl fs/ioctl.c:754 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 3946 hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline] hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199 hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42 softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline] softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222 softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline] softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(disc_data_lock); <Interrupt> lock(disc_data_lock); *** DEADLOCK *** 5 locks held by syz-executor826/9605: #0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 #1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413 #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288 stack backtrace: CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101 valid_state kernel/locking/lockdep.c:3112 [inline] mark_lock_irq kernel/locking/lockdep.c:3309 [inline] mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666 mark_usage kernel/locking/lockdep.c:3554 [inline] __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline] _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline] serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline] do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607 </IRQ> RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline] RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579 Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7 RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7 RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000 RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899 R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138 R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline] __mutex_lock_common kernel/locking/mutex.c:962 [inline] __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8e7/0x2ef0 kernel/exit.c:797 do_group_exit+0x135/0x360 kernel/exit.c:895 __do_sys_exit_group kernel/exit.c:906 [inline] __se_sys_exit_group kernel/exit.c:904 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x43fef8 Code: Bad RIP value. RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Fixes: 6e4e2f81 ("6pack,mkiss: fix lock inconsistency") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com>
-
Eric Dumazet authored
Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established(). Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table. They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one. Since we added code in commit d296ba60 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper. Fixes: 3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reported-by:
Firo Yang <firo.yang@suse.com> Reviewed-by:
-
Thomas Falcon authored
This conditional is missing a bang, with the intent being to break when the retry count reaches zero. Fixes: 476d96ca ("ibmvnic: Bound waits for device queries") Suggested-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Hangbin Liu authored
In commit 4b1373de ("net: ipv6: addr: perform strict checks also for doit handlers") we add strict check for inet6_rtm_getaddr(). But we did the invalid header values check before checking if NETLINK_F_STRICT_CHK is set. This may break backwards compatibility if user already set the ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code. I didn't move the nlmsg_len check because I thought it's a valid check. Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: 4b1373de ("net: ipv6: addr: perform strict checks also for doit handlers") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 13 Dec, 2019 4 commits
-
-
Arnd Bergmann authored
Without I2C, we get a link failure: drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3': ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init': ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit': ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver' Fixes: 3a6ba7dc ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by:
-
Jonathan Lemon authored
After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes unresponsive, likely due to interrupt livelock. It appears that a minimum clamp value for the irq timer is computed, but is never applied. Fix by applying the corrected clamp value. Fixes: 74706afa ("bnxt_en: Update interrupt coalescing logic.") Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vivien Didelot authored
I no longer work at Savoir-faire Linux but even though MAINTAINERS is up-to-date, some emails are still sent to my old email address. Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
Add myself and Sean as maintainers for rmnet driver. Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
- 12 Dec, 2019 3 commits
-
-
Manish Chopra authored
Driver doesn't accommodate the configuration for max number of multicast mac addresses, in such particular case it leaves the device with improper/invalid multicast configuration state, causing connectivity issues (in lacp bonding like scenarios). Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Cristian Birsan authored
Lan78xx driver accesses the PHY registers through MDIO bus over USB connection. When performing a suspend/resume, the PHY registers can be accessed before the USB connection is resumed. This will generate an error and will prevent the device to resume correctly. This patch adds the dependency between the MDIO bus and USB device to allow correct handling of suspend/resume. Fixes: ce85e13a ("lan78xx: Update to use phylib instead of mii_if_info.") Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-12-11 The following pull-request contains BPF updates for your *net* tree. We've added 8 non-merge commits during the last 1 day(s) which contain a total of 10 files changed, 126 insertions(+), 18 deletions(-). The main changes are: 1) Make BPF trampoline co-exist with ftrace-based tracers, from Alexei. 2) Fix build in minimal configurations, from Arnd. 3) Fix mips, riscv bpf_tail_call limit, from Paul. 4) Fix bpftool segfault, from Toke. 5) Fix samples/bpf, from Daniel. ==================== Signed-off-by:
-
- 11 Dec, 2019 22 commits
-
-
Daniel T. Lee authored
Currently, open() is called from the user program and it calls the syscall 'sys_openat', not the 'sys_open'. This leads to an error of the program of user side, due to the fact that the counter maps are zero since no function such 'sys_open' is called. This commit adds the kernel bpf program which are attached to the tracepoint 'sys_enter_openat' and 'sys_enter_openat'. Fixes: 1da236b6 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints") Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel T. Lee authored
Previously, when this sample is added, commit 1c47910e ("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and 'sys_write' has been used without no prefixes. But currently there are no exact symbols with these under kallsyms and this leads to failure. This commit changes exact compare to substring compare to keep compatible with exact symbol or prefixed symbol. Fixes: 1c47910e ("samples/bpf: add perf_event+bpf example") Signed-off-by:
-
Alexei Starovoitov authored
Add simple test script to execute funciton graph tracer while BPF trampoline attaches and detaches from the functions being graph traced. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191209000114.1876138-4-ast@kernel.org
-
Alexei Starovoitov authored
Make BPF trampoline attach its generated assembly code to kernel functions via register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF trampoline on the same kernel function. It also switches attaching logic from arch specific text_poke to generic ftrace that is available on many architectures. text_poke is still necessary for bpf-to-bpf attach and for bpf_tail_call optimization. Signed-off-by:
-
Toke Høiland-Jørgensen authored
When the kptr_restrict sysctl is set, the kernel can fail to return jited_ksyms or jited_prog_insns, but still have positive values in nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when trying to dump the program because it only checks the len fields not the actual pointers to the instructions and ksyms. Fix this by adding the missing checks. Fixes: 71bb428f ("tools: bpf: add bpftool") Fixes: f84192ee ("tools: bpftool: resolve calls without using imm field") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
-
Arnd Bergmann authored
Building with -Werror showed another failure: kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31': kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds] ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2; I don't actually understand why the array is empty, but a similar fix has addressed a related problem, so I suppose we can do the same thing here. Fixes: ce27709b ("bpf: Fix build in minimal configurations") Signed-off-by: -
Paul Chaignon authored
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls limit at runtime. In addition, a test was recently added, in tailcalls2, to check this limit. This patch updates the tail call limit in MIPS' JIT compiler to allow 33 tail calls. Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Reported-by:
Mahshid Khezri <khezri.mahshid@gmail.com> Signed-off-by:
Paul Chaignon <paul.chaignon@orange.com> Signed-off-by:
-
Paul Chaignon authored
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls limit at runtime. In addition, a test was recently added, in tailcalls2, to check this limit. This patch updates the tail call limit in RISC-V's JIT compiler to allow 33 tail calls. I tested it using the above selftest on an emulated RISCV64. Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G") Reported-by:
Björn Töpel <bjorn.topel@gmail.com> Acked-by:
-
Netanel Belgazal authored
In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration. The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets. In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
David S. Miller authored
Tuong Lien says: ==================== tipc: fix some issues This series consists of some bug-fixes for TIPC. ==================== Signed-off-by: -
Tuong Lien authored
In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called to read the header data field but after the message skb has been freed, that might result in a garbage value... This commit fixes it by defining a new local variable to store the data first, just like the other header fields' handling. Fixes: f73b1281 ("tipc: improve throughput between nodes in netns") Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Tuong Lien authored
When a user message is sent, TIPC will check if the socket has faced a congestion at link layer. If that happens, it will make a sleep to wait for the congestion to disappear. This leaves a gap for other users to take over the socket (e.g. multi threads) since the socket is released as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free to send messages to various destinations (e.g. via 'sendto()'), then the socket's preformatted header has to be updated correspondingly prior to the actual payload message building. Unfortunately, the latter action is done before the first action which causes a condition issue that the destination of a certain message can be modified incorrectly in the middle, leading to wrong destination when that message is built. Consequently, when the message is sent to the link layer, it gets stuck there forever because the peer node will simply reject it. After a number of retransmission attempts, the link is eventually taken down and the retransmission failure is reported. This commit fixes the problem by rearranging the order of actions to prevent the race condition from occurring, so the message building is 'atomic' and its header will not be modified by anyone. Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion") Acked-by:
-
Tuong Lien authored
In commit c55c8eda ("tipc: smooth change between replicast and broadcast"), we allow instant switching between replicast and broadcast by sending a dummy 'SYN' packet on the last used link to synchronize packets on the links. The 'SYN' message is an object of link congestion also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent back to the socket... However, in that commit, we simply use the same socket 'cong_link_cnt' counter for both the 'SYN' & normal payload message sending. Therefore, if both the replicast & broadcast links are congested, the counter will be not updated correctly but overwritten by the latter congestion. Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is reduced one by one and eventually overflowed. Consequently, further activities on the socket will only wait for the false congestion signal to disappear but never been met. Because sending the 'SYN' message is vital for the mechanism, it should be done anyway. This commit fixes the issue by marking the message with an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a link congestion, there is no need to touch the socket 'cong_link_cnt' either. In addition, in the event of any error (e.g. -ENOBUFS), we will purge the entire payload message queue and make a return immediately. Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Acked-by:
-
Tuong Lien authored
The current rbtree for service ranges in the name table is built based on the 'lower' & 'upper' range values resulting in a flaw in the rbtree searching. Some issues have been observed in case of range overlapping: Case #1: unable to withdraw a name entry: After some name services are bound, all of them are withdrawn by user but one remains in the name table forever. This corrupts the table and that service becomes dummy i.e. no real port. E.g. / {22, 22} / / ---> {10, 50} / \ / \ {10, 30} {20, 60} The node {10, 30} cannot be removed since the rbtree searching stops at the node's ancestor i.e. {10, 50}, so starting from it will never reach the finding node. Case #2: failed to send data in some cases: E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for this service will be one of the two cases below depending on the order of the bindings: {20, 60} {10, 50} <-- / \ / \ / \ / \ {10, 50} NIL <-- NIL {20, 60} (a) (b) Now, try to send some data to service {30}, there will be two results: (a): Failed, no route to host. (b): Ok. The reason is that the rbtree searching will stop at the pointing node as shown above. Case #3: Same as case #2b above but if the data sending's scope is local and the {10, 50} is published by a peer node, then it will result in 'no route to host' even though the other {20, 60} is for example on the local node which should be able to get the data. The issues are actually due to the way we built the rbtree. This commit fixes it by introducing an additional field to each node - named 'max', which is the largest 'upper' of that node subtree. The 'max' value for each subtrees will be propagated correctly whenever a node is inserted/ removed or the tree is rebalanced by the augmented rbtree callbacks. By this way, we can change the rbtree searching appoarch to solve the issues above. Another benefit from this is that we can now improve the searching for a next range matching e.g. in case of multicast, so get rid of the unneeded looping over all nodes in the tree. Acked-by: -
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Error recovery fixes. This patch series contains fixes mostly for the error recovery feature and related areas. Please queue the series for -stable also. Thanks. ==================== Signed-off-by: -
Vasundhara Volam authored
The VF driver also needs to create the health reporters since VFs are also involved in firmware reset and recovery. Modify bnxt_dl_register() and bnxt_dl_unregister() so that they can be called by the VFs to register/unregister devlink. Only the PF will register the devlink parameters. With devlink registered, we can now create the health reporters on the VFs. Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
Fix the logic to properly check the fw capabilities and create the devlink health reporters only when needed. The current code creates the reporters unconditionally as long as bp->fw_health is valid, and that's not correct. Call bnxt_dl_fw_reporters_create() directly from the init and reset code path instead of from bnxt_dl_register(). This allows the reporters to be adjusted when capabilities change. The same applies to bnxt_dl_fw_reporters_destroy(). Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter") Signed-off-by:
-
Vasundhara Volam authored
After fixing the allocation of bp->fw_health in the previous patch, the driver will not go through the fw reset and recovery code paths if bp->fw_health allocation fails. So we can now remove the unnecessary NULL checks. Signed-off-by:
-
Vasundhara Volam authored
bp->fw_health needs to be allocated for either the firmware initiated reset feature or the driver initiated error recovery feature. The current code is not allocating bp->fw_health for all the necessary cases. This patch corrects the logic to allocate bp->fw_health correctly when needed. If allocation fails, we clear the feature flags. We also add the the missing kfree(bp->fw_health) when the driver is unloaded. If we get an async reset message from the firmware, we also need to make sure that we have a valid bp->fw_health before proceeding. Fixes: 07f83d72 ("bnxt_en: Discover firmware error recovery capabilities.") Signed-off-by:
-
Vasundhara Volam authored
If any change happened in the configuration of VF in VM while collecting live dump, there could be a race and firmware can return more data than allocated dump length. Fix it by keeping track of the accumulated core dump length copied so far and abort the copy with error code if the next chunk of core dump will exceed the original dump length. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by:
-
Michael Chan authored
This will trigger new context memory to be rediscovered and allocated during the re-probe process after a firmware reset. Without this, the newly reset firmware does not have valid context memory and the driver will eventually fail to allocate some resources. Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by:
-
Michael Chan authored
The logic needs to check both bp->total_irqs and the reserved IRQs in hw_resc->resv_irqs if applicable and see if both are enough to cover the L2 and RDMA requested vectors. The current code is only checking bp->total_irqs and can fail in some code paths, such as the TX timeout code path with the RDMA driver requesting vectors after recovery. In this code path, we have not reserved enough MSIX resources for the RDMA driver yet. Fixes: 75720e63 ("bnxt_en: Keep track of reserved IRQs.") Signed-off-by:
-
- 10 Dec, 2019 1 commit
-
-
Stephan Gerhold authored
devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI is disabled (e.g. on device tree platforms). In this case, nxp-nci will silently fail to probe. The other NFC drivers only log a debug message if devm_acpi_dev_add_driver_gpios() fails. Do the same in nxp-nci to fix this problem. Fixes: ad0acfd6 ("NFC: nxp-nci: Get rid of code duplication in ->probe()") Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
- 09 Dec, 2019 6 commits
-
-
Davide Caratti authored
the following command currently fails: [root@fedora tc-testing]# ./tdc.py -l The following test case IDs are not unique: {'6f5e'} Please correct them before continuing. this happens because there are two tests having the same id: [root@fedora tc-testing]# grep -r 6f5e tc-tests/* tc-tests/actions/pedit.json: "id": "6f5e", tc-tests/filters/basic.json: "id": "6f5e", fix it replacing the latest duplicate id with a brand new one: [root@fedora tc-testing]# sed -i 's/6f5e//1' tc-tests/filters/basic.json [root@fedora tc-testing]# ./tdc.py -i Fixes: 4717b053 ("tc-testing: Introduced tdc tests for basic filter") Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Chuhong Yuan authored
fjes_acpi_add() misses a check for platform_device_register_simple(). Add a check to fix it. Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Mao Wenan authored
There is softlockup when using TPACKET_V3: ... NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms! (__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54) (_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c) (mod_timer) from [<c0549c30>] (prb_retire_rx_blk_timer_expired+0x68/0x11c) (prb_retire_rx_blk_timer_expired) from [<c027a7ac>] (call_timer_fn+0x90/0x17c) (call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc) (run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318) (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac) (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4) (msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4) (handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118) (gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c) ... If __ethtool_get_link_ksettings() is failed in prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies is zero and the timer expire for retire_blk_timer is turn to mod_timer(&pkc->retire_blk_timer, jiffies + 0), which will trigger cpu usage of softirq is 100%. Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Tested-by:
Xiao Jiangfeng <xiaojiangfeng@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Grygorii Strashko authored
The TI CPSW(s) driver produces warning with DMA API debug options enabled: WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968 DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes] CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41 Hardware name: Generic DRA72X (Flattened Device Tree) [<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14) [<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110) [<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c) [<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c) [<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968) [<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90) [<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c) [<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c) [<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c) [<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94) [<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4) [<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598) [<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74) [<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c) [<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c) [<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364) [<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8) [<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74) [<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24) [<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100) [<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14) Exception stack(0xea9a7fa8 to 0xea9a7ff0) ... The reason is that cpdma_chan_submit_si() now stores original buffer length (sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len) used to map the buffer. Hence, fix an issue by passing correct buffer length in CPDMA descriptor. Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Fixes: 6670acac ("net: ethernet: ti: davinci_cpdma: add dma mapped submit") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Wait for rcu grace period after releasing netns in ctnetlink, from Florian Westphal. 2) Incorrect command type in flowtable offload ndo invocation, from wenxu. 3) Incorrect callback type in flowtable offload flow tuple updates, also from wenxu. 4) Fix compile warning on flowtable offload infrastructure due to possible reference to uninitialized variable, from Nathan Chancellor. 5) Do not inline nf_ct_resolve_clash(), this is called from slow path / stress situations. From Florian Westphal. 6) Missing IPv6 flow selector description in flowtable offload. 7) Missing check for NETDEV_UNREGISTER in nf_tables offload infrastructure, from wenxu. 8) Update NAT selftest to use randomized netns names, from Florian Westphal. 9) Restore nfqueue bridge support, from Marco Oliverio. 10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header. From Phil Sutter. 11) Fix bogus lookup/get match for non-anonymous rbtree sets. 12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END elements. 13) Missing netlink validation for NFT_DATA_VALUE after nft_data_init(). 14) If rule specifies no actions, offload infrastructure returns EOPNOTSUPP. 15) Module refcount leak in object updates. 16) Missing sanitization for ARP traffic from br_netfilter, from Eric Dumazet. 17) Compilation breakage on big-endian due to incorrect memcpy() size in the flowtable offload infrastructure. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
In function 'memcpy', inlined from 'flow_offload_mangle' at net/netfilter/nf_flow_table_offload.c:112:2, inlined from 'flow_offload_port_dnat' at net/netfilter/nf_flow_table_offload.c:373:2, inlined from 'nf_flow_rule_route_ipv4' at net/netfilter/nf_flow_table_offload.c:424:3: ./include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter 376 | __read_overflow2(); | ^~~~~~~~~~~~~~~~~~ The original u8* was done in the hope to make this more adaptable but consensus is to keep this like it is in tc pedit. Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support") Reported-by:Laura Abbott <labbott@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
