- 04 Feb, 2021 1 commit
-
-
Bernard Zhao authored
remove unneeded variable: "rc". Signed-off-by:
Bernard Zhao <bernard@vivo.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org>
-
- 01 Feb, 2021 4 commits
-
-
AngeloGioacchino Del Regno authored
DRM_DEV_ERROR should be used across this entire source: convert the pr_err prints to the first as a cleanup. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by:
-
AngeloGioacchino Del Regno authored
The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Signed-off-by:
-
AngeloGioacchino Del Regno authored
The number of fractional registers bits is known and already set in the frac_bits variable of the dsi_pll_config struct here in 10nm: remove the TODO by simply using that variable. Signed-off-by:
-
AngeloGioacchino Del Regno authored
In function dsi_pll_calc_dec_frac we are calculating the decimal div start parameter by dividing the decimal multiple by the fractional multiplier: the remainder of that operation is stored to then get programmed to the fractional divider registers of the PLL. It's useless to call div_u64_rem to get the remainder and *then* call div_u64 to get the division result, as the first is already giving that result: let's fix it by just caring about the result of div_u64_rem. Signed-off-by:
-
- 31 Jan, 2021 31 commits
-
-
Judy Hsiao authored
1. Trigger the unplug event in msm_dp_display_disable() to shutdown audio properly. 2. Reset the completion before signal the disconnect event. Fixes: 158b9aa7 ("drm/msm/dp: wait for audio notification before disabling clocks") Reviewed-by:
Judy Hsiao <judyhsiao@chromium.org> Signed-off-by:
-
Xu Wang authored
fix semicolon.cocci warnings: drivers/gpu/drm/msm/dp/dp_ctrl.c:1161:2-3: Unneeded semicolon Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Xu Wang authored
fix semicolon.cocci warnings: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:752:2-3: Unneeded semicolon Signed-off-by:
-
Jiapeng Zhong authored
Fix below warnings reported by coccicheck: ./drivers/gpu/drm/msm/msm_gem.c:991:3-9: WARNING: NULL check before some freeing functions is not needed. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by:
-
Stephen Boyd authored
Lockdep complains about an AA deadlock when rebooting the device. base-commit: 19c329f6 ============================================ WARNING: possible recursive locking detected 5.4.91 #1 Not tainted -------------------------------------------- reboot/5213 is trying to acquire lock: ffffff80d13391b0 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 but task is already holding lock: ffffff80d1339110 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&kms->commit_lock[i]); lock(&kms->commit_lock[i]); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by reboot/5213: __arm64_sys_reboot+0x148/0x2a0 device_shutdown+0x10c/0x2c4 drm_atomic_helper_shutdown+0x48/0xfc modeset_lock+0x120/0x24c lock_crtcs+0x60/0xa4 stack backtrace: CPU: 4 PID: 5213 Comm: reboot Not tainted 5.4.91 #1 Hardware name: Google Pompom (rev1) with LTE (DT) Call trace: dump_backtrace+0x0/0x1dc show_stack+0x24/0x30 dump_stack+0xfc/0x1a8 __lock_acquire+0xcd0/0x22b8 lock_acquire+0x1ec/0x240 __mutex_lock_common+0xe0/0xc84 mutex_lock_nested+0x48/0x58 lock_crtcs+0x60/0xa4 msm_atomic_commit_tail+0x348/0x570 commit_tail+0xdc/0x178 drm_atomic_helper_commit+0x160/0x168 drm_atomic_commit+0x68/0x80 This is because lockdep thinks all the locks taken in lock_crtcs() are the same lock, when they actually aren't. That's because we call mutex_init() in msm_kms_init() and that assigns one static key for every lock initialized in this loop. Let's allocate a dynamic number of lock_class_keys and assign them to each lock so that lockdep can figure out an AA deadlock isn't possible here. Fixes: b3d91800 ("drm/msm: Fix race condition in msm driver with async layer updates") Cc: Krishna Manikandan <mkrishn@codeaurora.org> Signed-off-by:
-
Eric Anholt authored
Now that the bug is fixed in the minimal way for stable, go make the code table-driven. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Eric Anholt authored
Now that we're not racing with GPU setup, also fix races of timestamps against other timestamps. In freedreno CI, we were seeing this path trigger timeouts on setting the GMU bit, producing: [drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0 and this triggered especially on the first set of tests right after boot (it's probably easier to lose the race than one might think, given that we start many tests in parallel, and waiting for NFS to page in code probably means that lots of tests hit the same point of screen init at the same time). As of this patch, the message seems to have completely gone away. Signed-off-by:
-
Eric Anholt authored
We were using the same force-poweron bit in the two codepaths, so they could race to have one of them lose GPU power early. freedreno CI was seeing intermittent errors like: [drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0 and this issue could have contributed to it. Signed-off-by:
-
Iskren Chernev authored
Before the offending commit in msm_atomic_commit_tail wait_flush was called once per frame, after the commit was submitted. After it wait_flush is also called at the beginning to ensure previous potentially async commits are done. For cmd panels the source of wait_flush is a ping-pong irq notifying a completion. The completion needs to be notified with complete_all so multiple waiting parties (new async committers) can proceed. Signed-off-by:
Iskren Chernev <iskren.chernev@gmail.com> Suggested-by:
Rob Clark <robdclark@gmail.com> Fixes: 2d99ced7 ("drm/msm: async commit support") Signed-off-by:
-
Konrad Dybcio authored
The previous registers were *almost* correct, but instead of PHYs, they were pointing at DSI PLLs, resulting in the PHY id autodetection failing miserably. Fixes: dcefc117 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
Dmitry Baryshkov authored
SM8250 has quite unique qseed lut type: qseed3lite, which is a lightweight version of qseed3 scaler. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Kuogee Hsieh authored
There is HPD unplug interrupts missed at scenario of an irq_hpd followed by unplug interrupts with around 10 ms in between. Since both AUX_SW_RESET and DP_SW_RESET clear pending HPD interrupts, irq_hpd handler should not issues either aux or sw reset to avoid following unplug interrupt be cleared accidentally. This patch also postpone handling of irq_hpd until connected state if it happened at connection pending state. Changes in V2: -- add postpone handling of irq_hpd until connected state -- check DP_TRAINING_1 instead of DP_TRAINING_NONE Signed-off-by:
Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by:
-
AngeloGioacchino Del Regno authored
The call to dpu_encoder_phys_cmd_prepare_for_kickoff is useless as it's unused because the serialize_wait4pp variable is never set to true by .. anything, literally: remove the call. While at it, also reduce indentation by inverting the check for dpu_encoder_phys_cmd_is_master. Signed-off-by:
-
AngeloGioacchino Del Regno authored
When configuring the tearcheck, the parameters for the engine were being set mostly as they should've been, but then it wasn't getting configured to get the vsync indication from the TE GPIO input because it was assumed that autorefresh could be enabled: since a previous commit makes sure to disable the autorefresh bit when committing to the cmd engine, it is now safe to just enable the vsync pin input at tearcheck setup time (instead of erroneously never enabling it). Also, set the right sync_cfg_height to enable the DPU auto-generated TE signal in order to avoid stalls in the event that we miss one external TE signal: this will still trigger recovery mechanisms in case the display is really unreachable. Signed-off-by:
-
AngeloGioacchino Del Regno authored
When a command mode display is used, it may be retaining the bootloader configuration which, in most of the cases, enables the autorefresh feature in order to keep the splash up. Since there is no autorefresh management in this driver, wire up the autorefresh ops in the dpu_hw_pingpong and disable the feature when preparing for cmd commit: instead of disabling it when initializing the command mode, this road was chosen as to open future possibility of enabling and managing the autorefresh feature in the driver. Signed-off-by:
-
AngeloGioacchino Del Regno authored
The DSPP_BLK macro was ad-hoc made for SC7180, but this is wrong because not all of the DPU DSPP versions can use the same DSPP block configuration, and not all of them have got the same features. For this reason, add two more params to the DSPP_BLK macro, so that it is possible to specify the feature mask and the sblk config for each DSPP. Fixes: 4259ff7a ("drm/msm/dpu: add support for pcc color block in dpu driver") Signed-off-by:
-
AngeloGioacchino Del Regno authored
Not all DPU interface sub-block versions need the same value for prog_fetch_lines_worst_case: add this to the INTF_BLK macro, so that it becomes possible to vary it for other INTF versions. For example, this is needed to implement support for older SoCs, like MSM8998 and SDM630/660 and most probably will also be needed for future SoCs. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Not all DPU versions that are supported in this driver are supposed to have a 8-Levels VIG QoS setting. Move this flag to SDM845 and SC7180 specific masks. Signed-off-by:
-
AngeloGioacchino Del Regno authored
On DPUs prior to version 4 the VBIF_XINL_QOS_LVL_REMAP_000 register is at 0x570 offset from vbif base instead of 0x590, due to the VBIF_XINL_QOS_RP_REMAP_000 having less instances (less possible XINs). Signed-off-by:
-
Konrad Dybcio authored
Port over the command from downstream to prevent undefined behaviour. Signed-off-by:
-
Konrad Dybcio authored
Port over the command from downstream to prevent undefined behaviour. Signed-off-by:
-
Konrad Dybcio authored
The upstream API for some reason uses logbase2 instead of just passing the argument as-is, whereas downstream CAF kernel does the latter. Hence, a mistake has been made when porting: 4 is the value that's supposed to be passed, but log2(4) = 2. Changing the value to 16 (= 2^4) fixes the issue. Signed-off-by:
-
AngeloGioacchino Del Regno authored
Resetting the VBIF before power collapse is done to avoid getting bogus FIFO entries during the suspend sequence or subsequent resume, but this is doable only on Adreno 510 and Adreno 530, as the other units will tendentially lock up. Especially on Adreno 508, the GPU will show lockups and very bad slownesses after processing the first frame. Avoiding to execute the RBBM SW Reset before suspend will stop the lockup issue from happening on at least Adreno 508/509/512. Signed-off-by:
-
AngeloGioacchino Del Regno authored
The Adreno 508/509/512 GPUs are stripped versions of the Adreno 5xx found in the mid-end SoCs such as SDM630, SDM636, SDM660 and SDA variants; these SoCs are usually provided with ZAP firmwares, but they have no available GPMU. Signed-off-by:
Martin Botka <martin.botka1@gmail.com> Reviewed-by:
-
AngeloGioacchino Del Regno authored
The "main" if branch where we program the other registers for the Adreno 5xx family of GPUs should not contain the PC_DBG_ECO_CNTL register programming because this has logical similarity differences from all the others. A later commit will show the entire sense of this. Signed-off-by:
-
AngeloGioacchino Del Regno authored
The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets programmed to some different values on a per-model basis. At least, this is what we intend to do here; Unfortunately, though, this register is being overwritten with a static magic number, right after applying the GPU-specific configuration (including the GPU-specific quirks) and that is effectively nullifying the efforts. Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL register in order to retain the wanted configuration for the target GPU. Signed-off-by:
-
Sai Prakash Ranjan authored
A6XX GPUs have support for last level cache(LLC) also known as system cache and need to set the bus attributes to use it. Currently we use a generic adreno iommu address space implementation which are also used by older GPU generations which do not have LLC and might introduce issues accidentally and is not clean in a way that anymore additions of GPUs supporting LLC would have to be guarded under ifdefs. So keep the generic code separate and make the address space creation A6XX specific. We also have a helper to set the llc attributes so that if the newer GPU generations do support them, we can use it instead of open coding domain attribute setting for each GPU. Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by:
-
Sai Prakash Ranjan authored
Domain attribute setting for LLCC is guarded by !IS_ERR check which works fine only when CONFIG_QCOM_LLCC=y but when it is disabled, the LLCC apis return NULL and that is not handled by IS_ERR check. Due to this, domain attribute for LLCC will be set even on GPUs which do not support it and cause issues, so correct this by using IS_ERR_OR_NULL checks appropriately. Meanwhile also cleanup comment block and remove unwanted blank line. Fixes: 00fd44a1 ("drm/msm: Only enable A6xx LLCC code on A6xx") Fixes: 474dadb8 ("drm/msm/a6xx: Add support for using system cache(LLC)") Signed-off-by:
-
AngeloGioacchino Del Regno authored
On at least MSM8998 it's possible to find Adreno 540.0 and 540.1 but I have never found any 540.2. In any case, the patchids 0-1 for A540 are completely supported by this driver and there is no reason to disallow probing them (as they also share the same firmware names). Besides that, the patchid number is also used in the a5xx_power.c function a540_lm_setup to disable the battery current limiter, which makes faking the Adreno patchid to .2 (which would anyway be sad) useless and even producing breakages. Signed-off-by:
-
Iskren Chernev authored
The msm_gem_get_iova should be guarded with gpu != NULL and not aspace != NULL, because aspace is NULL when using vram carveout. Fixes: 933415e2 ("drm/msm: Add support for private address space instances") Signed-off-by:
Alexey Minnekhanov <alexeymin@postmarketos.org> Signed-off-by:
-
Akhil P Oommen authored
Some GPUs support different max frequencies depending on the platform. To identify the correct variant, we should check the gpu speedbin fuse value. Add support for this speedbin detection to a6xx family along with the required fuse details for a618 gpu. Signed-off-by:
Akhil P Oommen <akhilpo@codeaurora.org> Reviewed-by:
-
- 25 Jan, 2021 1 commit
-
-
Linus Torvalds authored
-
- 24 Jan, 2021 3 commits
-
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup and warning fixes" * tag 'sh-for-5.11' of git://git.libc.org/linux-sh: sh/intc: Restore devm_ioremap() alignment sh: mach-sh03: remove duplicate include arch: sh: remove duplicate include sh: Drop ARCH_NR_GPIOS definition sh: Remove unused HAVE_COPY_THREAD_TLS macro sh: remove CONFIG_IDE from most defconfig sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE arch/sh: hyphenate Non-Uniform in Kconfig prompt sh: dma: fix kconfig dependency for G2_DMA
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Still need a final cancelation fix that isn't quite done done, expected in the next day or two. That said, this contains: - Wakeup fix for IOPOLL requests - SQPOLL split close op handling fix - Ensure that any use of io_uring fd itself is marked as inflight - Short non-regular file read fix (Pavel) - Fix up bad false positive warning (Pavel) - SQPOLL fixes (Pavel) - In-flight removal fix (Pavel)" * tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block: io_uring: account io_uring internal files as REQ_F_INFLIGHT io_uring: fix sleeping under spin in __io_clean_op io_uring: fix short read retries for non-reg files io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state io_uring: fix skipping disabling sqo on exec io_uring: fix uring_flush in exit_files() warning io_uring: fix false positive sqo warning on flush io_uring: iopoll requests should also wake task ->in_idle state
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci - lightnvm error path leak fix (Pan) - MD pull request from Song: - Flush request fix (Xiao) * tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block: lightnvm: fix memory leak when submit fails nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data md: Set prev_flush_start and flush_bio in an atomic way nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
-
