It's possible that device removal happens when the bond is in non-AB mode,
and addition happens in AB mode, so bond_ipsec_del_sa() never gets called,
which leaves security associations in an odd state if bond_ipsec_add_sa()
then gets called after switching the bond into AB. Just call add and
delete universally for all modes to keep things consistent.

However, it's also possible that this code gets called when the system is
shutting down, and the xfrm subsystem has already been disconnected from
the bond device, so we need to do some error-checking and bail, lest we
hit a null ptr deref.

Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load")
CC: Huy Nguyen <huyn@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linus Walleij says:

====================
RTL8366RB tagging support

This patch set adds DSA tagging support to the RTL8366RB
DSA driver.

There is a minor performance improvement in the tag parser
compared to the previous patch set and the review tags
have been collected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This activates the support to use the CPU tag to properly
direct ingress traffic to the right port.

Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to
1 to disable the insertion of the CPU tag which is what
the code currently does. The bit 15 define calls this
setting RTL8368RB_CPU_INSTAG which is confusing since the
inverse meaning is implied: programmers may think that
setting this bit to 1 will *enable* inserting the tag
rather than disabling it, so rename this setting in
bit 15 to RTL8368RB_CPU_NO_TAG which is more to the
point.

After this e.g. ping works out-of-the-box with the
RTL8366RB.

Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This implements the known parts of the Realtek 4 byte
tag protocol version 0xA, as found in the RTL8366RB
DSA switch.

It is designated as protocol version 0xA as a
different Realtek 4 byte tag format with protocol
version 0x9 is known to exist in the Realtek RTL8306
chips.

The tag and switch chip lacks public documentation, so
the tag format has been reverse-engineered from
packet dumps. As only ingress traffic has been available
for analysis an egress tag has not been possible to
develop (even using educated guesses about bit fields)
so this is as far as it gets. It is not known if the
switch even supports egress tagging.

Excessive attempts to figure out the egress tag format
was made. When nothing else worked, I just tried all bit
combinations with 0xannp where a is protocol and p is
port. I looped through all values several times trying
to get a response from ping, without any positive
result.

Using just these ingress tags however, the switch
functionality is vastly improved and the packets find
their way into the destination port without any
tricky VLAN configuration. On the D-Link DIR-685 the
LAN ports now come up and respond to ping without
any command line configuration so this is a real
improvement for users.

Egress packets need to be restricted to the proper
target ports using VLAN, which the RTL8366RB DSA
switch driver already sets up.

Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exposes new link modes using 100Gbps per lane, including 100G,
200G and 400G modes.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define 100G, 200G and 400G link modes using 100Gbps per lane

LR, ER and FR are defined as a single link mode because they are
using same technology and by design are fully interoperable.
EEPROM content indicates if the module is LR, ER, or FR, and the
user space ethtool decoder is planned to support decoding these
modes in the EEPROM.
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Driver update for net-next.

This patchset implements ethtool -X to setup user-defined RSS indirection
table.  The new infrastructure also allows the proper logical ring index
to be used to populate the RSS indirection when queried by ethtool -x.
Prior to these patches, we were incorrectly populating the output of
ethtool -x with internal ring IDs which would make no sense to the user.

The last 2 patches add some cleanups to the VLAN acceleration logic
and check the firmware capabilities before allowing VLAN acceleration
offloads.

v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2.
    Modify patch #7 to revert RSS map to default only when necessary.

v3: Use ALIGN() in patch 5.
    Add warning messages in patch 6.

v2: Some RSS indirection table changes requested by Jakub Kicinski.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bare-metal use cases require giving firmware and the embedded
application processor control over VLAN offloads. The driver should
not attempt to override or utilize this feature in such scenarios
since it will not work as expected.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware VLAN offload feature on our NIC does not have separate
knobs for handling customer and service tags on RX. Either offloading
of both must be enabled or both must be disabled. Introduce definitions
for the combined feature set in order to clean up the code and make
this constraint more clear. Technically these features can be separately
enabled on TX, however, since the default is to turn both on, the
combined TX feature set is also introduced for code consistency.
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the new infrastructure in place, we can now support the setting of
the indirection table from ethtool.

When changing channels, in a rare case that firmware cannot reserve the
rings that were promised, we will still try to keep the RSS map and only
revert to default when absolutely necessary.

v4: Revert RSS map to default during ring change only when absolutely
    necessary.

v3: Add warning messages when firmware cannot reserve the requested RX
    rings, and when the RSS table entries have to change to default.

v2: When changing channels, if the RSS table size changes and RSS map
    is non-default, return error.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have the logical indirection table, we can return these
proper logical indices directly to ethtool -x instead of the physical
IDs.
Reported-by: Jakub Kicinski <kicinski@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have the logical table, we can fill the HW RSS table
using the logical table's entries and converting them to the HW
specific format.  Re-initialize the logical table to standard
distribution if the number of RX rings changes during ring reservation.

v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size.

v2: Use ALIGN() to roundup the RSS table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some chips, this varies based on the number of RX rings.  Add this
helper function and refactor the existing code to use it.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver currently does not keep track of the logical RSS indirection
table.  The hardware RSS table is set up with standard default ring
distribution when initializing the chip.  This makes it difficult to
support user sepcified indirection table entries.  As a first step, add
the logical table in the main bnxt structure and allocate it according
to chip specific table size.  Add a function that sets up default
RSS distribution based on the number of RX rings.

v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size.

v2: Use kmalloc_array() since we init. all entries afterwards.
    Use ALIGN() to roundup the RSS table size.
    Use ethtool_rxfh_indir_default() to init. the default entries.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix up bnxt_get_rxfh_indir_size() to return the proper current RSS
table size for P5 chips.  Change it to non-static so that bnxt.c
can use it to get the table size.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we allocate one page for the hardware DMA RSS indirection
table.  While the size is currently big enough for all chips, future
chip variations may support bigger sizes, so it is better to calculate
and store the chip specific size and allocate accordingly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for rejecting packets from the prerouting chain, from
   Laura Garcia Liebana.

2) Remove useless assignment in pipapo, from Stefano Brivio.

3) On demand hook registration in IPVS, from Julian Anastasov.

4) Expire IPVS connection from process context to not overload
   timers, also from Julian.

5) Fallback to conntrack TCP tracker to handle connection reuse
   in IPVS, from Julian Anastasov.

6) Several patches to support for chain bindings.

7) Expose enum nft_chain_flags through UAPI.

8) Reject unsupported chain flags from the netlink control plane.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Uninline PHY ethtool statistics

Now that we have introduced ethtool_phy_ops we can uninline those
operations and move them back into phy.c where they belong. Since those
functions are used by DSA, we need to continue exporting those symbols.

It might be possible to remove ndo_get_ethtool_phy_stats in a subsequent
patch since we could have DSA register its own ethtool_phy_ops instance
instead of overloading the ethtool_ops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have moved the PHY ethtool statistics to be dynamically
registered, we no longer need to inline those for ethtool. This used to
be done to avoid cross symbol referencing and allow ethtool to be
decoupled from PHYLIB entirely.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend ethtool_phy_ops to include the 3 function pointers necessary for
implementing PHY statistics. In a subsequent change we will uninline
those functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have a number of error conditions that can lead to the driver not
probing successfully, move the print when we are sure
dsa_register_switch() has suceeded. This avoids repeated prints in case
of probe deferral for instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add error checking with sfp_irq_name before use.
Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are spelling mistakes in various literal strings. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: ethtool: Untangle PHYLIB dependency

This patch series untangles the ethtool netlink dependency with PHYLIB
which exists because the cable test feature calls directly into PHY
library functions. The approach taken here is to introduce
ethtool_phy_ops function pointers which can be dynamically registered
when PHYLIB loads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have introduced ethtool_phy_ops and the PHY library
dynamically registers its operations with that function pointer, we can
remove the direct PHYLIB dependency in favor of using dynamic
operations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Utilize ethtool_set_ethtool_phy_ops to register a suitable set of PHY
ethtool operations in a dynamic fashion such that ethtool will no longer
directy reference PHY library symbols.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to decouple ethtool from its PHY library dependency, define an
ethtool_phy_ops singleton which can be overriden by the PHY library when
it loads with an appropriate set of function pointers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix table formatting to eliminate warnings.

Documentation/networking/ethtool-netlink.rst:509: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:522: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:543: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:555: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:591: WARNING: Malformed table.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If phylib is built as a module and CONFIG_MDIO_DEVICE is 'y', the
mdio_device and mdio_bus code will be in the phylib module, not in the
kernel image. Meanwhile we build mdio_devres depending on the
CONFIG_MDIO_DEVICE symbol, so if it's 'y', it will go into the kernel
and we'll hit the following linker error:

   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_alloc_size':
>> drivers/net/phy/mdio_devres.c:38: undefined reference to `mdiobus_alloc_size'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_free':
>> drivers/net/phy/mdio_devres.c:16: undefined reference to `mdiobus_free'
   ld: drivers/net/phy/mdio_devres.o: in function `__devm_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:87: undefined reference to `__mdiobus_register'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_unregister':
>> drivers/net/phy/mdio_devres.c:53: undefined reference to `mdiobus_unregister'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_of_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:120: undefined reference to `of_mdiobus_register'

Add a hidden Kconfig option for MDIO_DEVRES which will be currently
selected by CONFIG_PHYLIB as there are no non-phylib users of these
helpers.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vaibhav Gupta says:

====================
smsc: use generic power management

Linux Kernel Mentee: Remove Legacy Power Management.

The purpose of this patch series is to remove legacy power management callbacks
from smsc ethernet drivers.

The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.

The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.

All patches are compile-tested only.

V2: Kbuild in V1, warning: variable 'err' is used uninitialized whenever 'if'
conditio is false in funcution .resume() .
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions.

With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves.

With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

priv->page_pool is an array, so comparing against it will always return true.
Do a meaningful check by checking priv->page_pool[0] instead.
While at it, clear the page_pool pointers on deallocation, or when an
allocation error happens during init.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: c2d6fe61 ("mvpp2: XDP TX support")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can re-use the existing work queue to handle path management
instead of a dedicated work queue.  Just move pm_worker to protocol.c,
call it from the mptcp worker and get rid of the msk lock (already held).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, gcc report
the following warning:

drivers/net/ethernet/sun/cassini.c:5206:12: warning:
 'cas_resume' defined but not used [-Wunused-function]
 5206 | static int cas_resume(struct device *dev_d)
      |            ^~~~~~~~~~

Mark cas_resume() as __maybe_unused to make it clear.

Fixes: f193f4eb ("sun/cassini: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The upgraded .suspend() and .resume() throw
"defined but not used [-Wunused-function]" warning for certain
configurations.

Mark them with "__maybe_unused" attribute.

Compile-tested only.

Fixes: b0db0cc2 ("sun/niu: use generic power management")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>