We only need amd_bus.o for AMD systems with PCI.  arch/x86/pci/Makefile
already depends on CONFIG_PCI=y, so this patch just adds the dependency
on CONFIG_AMD_NB.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org	# 2.6.34+ (needs adjustment for k8 -> amd rename)
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SH/R-Mobile updates for 3.3 merge window.

* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: (32 commits)
  arm: mach-shmobile: add a resource name for shdma
  ARM: mach-shmobile: r8a7779 SMP support V3
  ARM: mach-shmobile: Add kota2 defconfig.
  ARM: mach-shmobile: Add marzen defconfig.
  ARM: mach-shmobile: r8a7779 power domain support V2
  ARM: mach-shmobile: Fix up marzen build for recent GIC changes.
  ARM: mach-shmobile: r8a7779 PFC function support
  ARM: mach-shmobile: Flush caches in platform_cpu_die()
  ARM: mach-shmobile: Allow SoC specific CPU kill code
  ARM: mach-shmobile: Fix headsmp.S code to use CPUINIT
  ARM: mach-shmobile: clock-r8a7779: clkz/clkzs support
  ARM: mach-shmobile: clock-r8a7779: add DIV4 clock support
  ARM: mach-shmobile: Marzen LAN89218 support
  ARM: mach-shmobile: Marzen SCIF2/SCIF4 support
  ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2
  ARM: mach-shmobile: r8a7779 and Marzen base support V2
  sh: pfc: Unlock register support
  sh: pfc: Variable bitfield width config register support
  sh: pfc: Add config_reg_helper() function
  sh: pfc: Convert index to field and value pair
  ...

SuperH updates for 3.3 merge window.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits)
  sh: magicpanelr2: Update for parse_mtd_partitions() fallout.
  sh: mach-rsk: Update for parse_mtd_partitions() fallout.
  sh: sh2a: Improve cache flush/invalidate functions
  sh: also without PM_RUNTIME pm_runtime.o must be built
  sh: add a resource name for shdma
  sh: Remove redundant try_to_freeze() invocations.
  sh: Ensure IRQs are enabled across do_notify_resume().
  sh: Fix up store queue code for subsys_interface changes.
  sh: clkfwk: sh_clk_init_parent() should be called after clk_register()
  sh: add platform_device for renesas_usbhs in board-sh7757lcr
  sh: modify clock-sh7757 for renesas_usbhs
  sh: pfc: ioremap() support
  sh: use ioread32/iowrite32 and mapped_reg for div6
  sh: use ioread32/iowrite32 and mapped_reg for div4
  sh: use ioread32/iowrite32 and mapped_reg for mstp32
  sh: extend clock struct with mapped_reg member
  sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clkfwk: clock-sh7724: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clock-sh7723: add CLKDEV_ICK_ID for cleanup
  serial: sh-sci: Handle GPIO function requests.
  ...

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix lockup by limiting load-balance retries on lock-break
  sched: Fix CONFIG_CGROUP_SCHED dependency
  sched: Remove empty #ifdefs

Follows the RSK+ change for the same rationale.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The RSK+ setup code was doing some pretty dubious things with
parse_mtd_partitions() in order to populate the physmap-flash map
platform data. The physmap-flash driver contains all of the functionality
that we require already, so simply drop the special casing and pad out
the platform data accordingly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The cache functions lock out interrupts for long periods; this patch
reduces the impact when operating on large address ranges. In such
cases it will:
- Invalidate the entire cache rather than individual addresses.
- Do nothing when flushing the operand cache in write-through mode.
- When flushing the operand cache in write-back mdoe, index the
  search for matching addresses on the cache entires instead of the
  addresses to flush

Note: sh2a__flush_purge_region was only invalidating the operand
cache, this adds flush.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/sh/kernel/cpu/sh4a/clock-sh7723.c
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be
built on sh platforms, because then it provides means to statically
switch on device PM clocks.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel config: Fix the APB_TIMER selection
  x86/mrst: Add additional debug prints for pb_keys
  x86/intel config: Revamp configuration to allow for Moorestown and Medfield
  x86/intel/scu/ipc: Match the changes in the x86 configuration
  x86/apb: Fix configuration constraints
  x86: Fix INTEL_MID silly
  x86/Kconfig: Cyclone-timer depends on x86-summit
  x86: Reduce clock calibration time during slave cpu startup
  x86/config: Revamp configuration for MID devices
  x86/sfi: Kill the IRQ as id hack

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, reboot: Fix typo in nmi reboot path
  x86, NMI: Add to_cpumask() to silence compile warning
  x86, NMI: NMI selftest depends on the local apic
  x86: Add stack top margin for stack overflow checking
  x86, NMI: NMI-selftest should handle the UP case properly
  x86: Fix the 32-bit stackoverflow-debug build
  x86, NMI: Add knob to disable using NMI IPIs to stop cpus
  x86, NMI: Add NMI IPI selftest
  x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus
  x86: Clean up the range of stack overflow checking
  x86: Panic on detection of stack overflow
  x86: Check stack overflow in detail

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Break up large initrd reads
  x86, efi: EFI boot stub support
  efi: Add EFI file I/O data types
  efi.h: Add boottime->locate_handle search types
  efi.h: Add graphics protocol guids
  efi.h: Add allocation types for boottime->allocate_pages()
  efi.h: Add efi_image_loaded_t
  efi.h: Add struct definition for boot time services
  x86: Don't use magic strings for EFI loader signature
  x86: Add missing bzImage fields to struct setup_header

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numa: Add constraints check for nid parameters
  mm, x86: Remove debug_pagealloc_enabled
  x86/mm: Initialize high mem before free_all_bootmem()
  arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
  arch/x86/kernel/e820.c: Eliminate bubble sort from sanitize_e820_map()
  x86: Fix mmap random address range
  x86, mm: Unify zone_sizes_init()
  x86, mm: Prepare zone_sizes_init() for unification
  x86, mm: Use max_low_pfn for ZONE_NORMAL on 64-bit
  x86, mm: Wrap ZONE_DMA32 with CONFIG_ZONE_DMA32
  x86, mm: Use max_pfn instead of highend_pfn
  x86, mm: Move zone init from paging_init() on 64-bit
  x86, mm: Use MAX_DMA_PFN for ZONE_DMA on 32-bit

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (23 commits)
  [CPUFREQ] EXYNOS: Removed useless headers and codes
  [CPUFREQ] EXYNOS: Make EXYNOS common cpufreq driver
  [CPUFREQ] powernow-k8: Update copyright, maintainer and documentation information
  [CPUFREQ] powernow-k8: Fix indexing issue
  [CPUFREQ] powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB
  [CPUFREQ] update lpj only if frequency has changed
  [CPUFREQ] cpufreq:userspace: fix cpu_cur_freq updation
  [CPUFREQ] Remove wall variable from cpufreq_gov_dbs_init()
  [CPUFREQ] EXYNOS4210: cpufreq code is changed for stable working
  [CPUFREQ] EXYNOS4210: Update frequency table for cpu divider
  [CPUFREQ] EXYNOS4210: Remove code about bus on cpufreq
  [CPUFREQ] s3c64xx: Use pr_fmt() for consistent log messages
  cpufreq: OMAP: fixup for omap_device changes, include <linux/module.h>
  cpufreq: OMAP: fix freq_table leak
  cpufreq: OMAP: put clk if cpu_init failed
  cpufreq: OMAP: only supports OPP library
  cpufreq: OMAP: dont support !freq_table
  cpufreq: OMAP: deny initialization if no mpudev
  cpufreq: OMAP: move clk name decision to init
  cpufreq: OMAP: notify even with bad boot frequency
  ...

* git://git.infradead.org/battery-2.6: (68 commits)
  power_supply: Mark da9052 driver as broken
  power_supply: Drop usage of nowarn variant of sysfs_create_link()
  s3c_adc_battery: Average over more than one adc sample
  power_supply: Add DA9052 battery driver
  isp1704_charger: Fix missing check
  jz4740-battery: Fix signedness bug
  power_supply: Assume mains power by default
  sbs-battery: Fix devicetree match table
  ARM: rx51: Add bq27200 i2c board info
  sbs-battery: Change power supply name
  devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings
  devicetree-bindings: Add vendor entry for Smart Battery Systems
  sbs-battery: Rename internals to new name
  bq20z75: Rename to sbs-battery
  wm97xx_battery: Use DEFINE_MUTEX() for work_lock
  max8997_charger: Remove duplicate module.h
  lp8727_charger: Some minor fixes for the header
  lp8727_charger: Add header file
  power_supply: Convert drivers/power/* to use module_platform_driver()
  power_supply: Add "unknown" in power supply type
  ...

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slub: disallow changing cpu_partial from userspace for debug caches
  slub: add missed accounting
  slub: Extract get_freelist from __slab_alloc
  slub: Switch per cpu partial page support off for debugging
  slub: fix a possible memleak in __slab_alloc()
  slub: fix slub_max_order Documentation
  slub: add missed accounting
  slab: add taint flag outputting to debug paths.
  slub: add taint flag outputting to debug paths
  slab: introduce slab_max_order kernel parameter
  slab: rename slab_break_gfp_order to slab_max_order

Two bugfixes for md.

One is a recently introduced regression that affects an unusual
configuration with a guaranteed BUG_ON.  Has been tagged for -stable.
The other is minor missing functionality.

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md/raid1: perform bad-block tests for WriteMostly devices too.
  md: notify the 'degraded' sysfs attribute on failure.

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
  x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
  PCI: Increase resource array mask bit size in pcim_iomap_regions()
  PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
  PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
  PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
  x86/PCI: amd: factor out MMCONFIG discovery
  PCI: Enable ATS at the device state restore
  PCI: msi: fix imbalanced refcount of msi irq sysfs objects
  PCI: kconfig: English typo in pci/pcie/Kconfig
  PCI/PM/Runtime: make PCI traces quieter
  PCI: remove pci_create_bus()
  xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
  x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
  x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
  x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
  sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
  sparc/PCI: convert to pci_create_root_bus()
  sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
  powerpc/PCI: convert to pci_create_root_bus()
  powerpc/PCI: split PHB part out of pcibios_map_io_space()
  ...

Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.

This patch contains r8a7779 SMP support V3 - now including
CPU hotplug offine and online support. The r8a7779 power
domain code is tied together with SMP glue code which allows
us to control the power domains via CPU hotplug.

At this point the kernel boots with the 4 Cortex-A9 cores in
SMP mode and all CPU cores except CPU0 can be hotplugged.

The code in platsmp.c is quite far from pretty, but it is
kept like that intentionally to avoid creating layers of
code that will go away in the near future anyway. The code
needs to be updated when some per-SoC handling code will be
added to the ARM architecture, see the following patch for
more information:
 "[RFC PATCH 0/3] Per SoC descriptor"
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpu_dev_init() is only called from driver_init(), which does not check
its return value.  Therefore make cpu_dev_init() return void.

We must register the CPU subsystem, so panic if this fails.

If sched_create_sysfs_power_savings_entries() fails, the damage is
contained, so ignore this (as before).
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Eric and David reported dead machines and traced it to commit
a195f004 ("sched: Fix load-balance lock-breaking"), it turns out
there's still a scenario where we can end up re-trying forever.

Since there is no strict forward progress guarantee in the
load-balance iteration we can get stuck re-retrying the same
task-set over and over.

Creating a forward progress guarantee with the existing
structure is somewhat non-trivial, for now simply terminate the
retry loop after a few tries.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: David Ahern <dsahern@gmail.com>
[ logic cleanup as suggested by Eric ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1326297936.2442.157.camel@twinsSigned-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits)
  crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig
  crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs
  crypto: serpent-sse2 - select LRW and XTS
  crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs
  crypto: twofish-x86_64-3way - select LRW and XTS
  crypto: xts - remove dependency on EXPERIMENTAL
  crypto: lrw - remove dependency on EXPERIMENTAL
  crypto: picoxcell - fix boolean and / or confusion
  crypto: caam - remove DECO access initialization code
  crypto: caam - fix polarity of "propagate error" logic
  crypto: caam - more desc.h cleanups
  crypto: caam - desc.h - convert spaces to tabs
  crypto: talitos - convert talitos_error to struct device
  crypto: talitos - remove NO_IRQ references
  crypto: talitos - fix bad kfree
  crypto: convert drivers/crypto/* to use module_platform_driver()
  char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver()
  crypto: serpent-sse2 - should select CRYPTO_CRYPTD
  crypto: serpent - rename serpent.c to serpent_generic.c
  crypto: serpent - cleanup checkpatch errors and warnings
  ...

* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
  ima: fix invalid memory reference
  ima: free duplicate measurement memory
  security: update security_file_mmap() docs
  selinux: Casting (void *) value returned by kmalloc is useless
  apparmor: fix module parameter handling
  Security: tomoyo: add .gitignore file
  tomoyo: add missing rcu_dereference()
  apparmor: add missing rcu_dereference()
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mpi/mpi-mpow: NULL dereference on allocation failure
  digsig: build dependency fix
  KEYS: Give key types their own lockdep class for key->sem
  TPM: fix transmit_cmd error logic
  TPM: NSC and TIS drivers X86 dependency fix
  TPM: Export wait_for_stat for other vendor specific drivers
  TPM: Use vendor specific function for status probe
  tpm_tis: add delay after aborting command
  tpm_tis: Check return code from getting timeouts/durations
  tpm: Introduce function to poll for result of self test
  ...

Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
and SIGSIG next to CONFIG_DQL addition.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs4: deal with autofs4_write/autofs4_write races
  autofs4: catatonic_mode vs. notify_daemon race
  autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
  hfsplus: creation of hidden dir on mount can fail
  block_dev: Suppress bdev_cache_init() kmemleak warninig
  fix shrink_dcache_parent() livelock
  coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
  coda: deal correctly with allocation failure from coda_cnode_makectl()
  securityfs: fix object creation races

Just serialize the actual writing of packets into pipe on
a new mutex, independent from everything else in the locking
hierarchy.  As soon as something has started feeding a piece
of packet into the pipe to daemon, we *want* everything else
about to try the same to wait until we are done.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

we need to hold ->wq_mutex while we are forming the packet to send,
lest we have autofs4_catatonic_mode() setting wq->name.name to NULL
just as autofs4_notify_daemon() decides to memcpy() from it...

We do have check for catatonic mode immediately after that (under
->wq_mutex, as it ought to be) and packet won't be actually sent,
but it'll be too late for us if we oops on that memcpy() from NULL...

Fix is obvious - just extend the area covered by ->wq_mutex over
that switch and check whether it's catatonic *before* doing anything
else.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

We need to recheck ->catatonic after autofs4_wait() got ->wq_mutex
for good, or we might end up with wq inserted into queue after
autofs4_catatonic_mode() had done its thing.  It will stick there
forever, since there won't be anything to clear its ->name.name.

A bit of a complication: validate_request() drops and regains ->wq_mutex.
It actually ends up the most convenient place to stick the check into...
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig

* tag 'for-linux-3.3-merge-window' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: (29 commits)
  C6X: replace tick_nohz_stop/restart_sched_tick calls
  C6X: add register_cpu call
  C6X: deal with memblock API changes
  C6X: fix timer64 initialization
  C6X: fix layout of EMIFA registers
  C6X: MAINTAINERS
  C6X: DSCR - Device State Configuration Registers
  C6X: EMIF - External Memory Interface
  C6X: general SoC support
  C6X: library code
  C6X: headers
  C6X: ptrace support
  C6X: loadable module support
  C6X: cache control
  C6X: clocks
  C6X: build infrastructure
  C6X: syscalls
  C6X: interrupt handling
  C6X: time management
  C6X: signal management
  ...

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire-up new system calls
  microblaze: Remove NO_IRQ from architecture
  input: xilinx_ps2: Don't use NO_IRQ
  block: xsysace: Don't use NO_IRQ
  microblaze: Trivial asm fix
  microblaze: Fix debug message in module
  microblaze: Remove eprintk macro
  microblaze: Send CR before LF for early console
  microblaze: Change NO_IRQ to 0
  microblaze: Use irq_of_parse_and_map for timer
  microblaze: intc: Change variable name
  microblaze: Use of_find_compatible_node for timer and intc
  microblaze: Add __cmpdi2
  microblaze: Synchronize __pa __va macros

* 'unicore32' of git://github.com/gxt/linux:
  rtc-puv3: solve section mismatch in rtc-puv3.c
  rtc-puv3: using module_platform_driver()
  i2c-puv3: using module_platform_driver()
  rtc-puv3: irq: remove IRQF_DISABLED
  unicore32: Remove IRQF_DISABLED
  unicore32: Use set_current_blocked()
  unicore32: add ioremap_nocache definition
  unicore32: delete specified xlate_dev_mem_ptr
  of: add include asm/setup.h in drivers/of/fdt.c
  unicore32: standardize /proc/iomem "Kernel code" name

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  blackfin: bf561: add adv7183 capture support
  blackfin: bf537: add capture support
  blackfin: bf548: add capture support
  blackfin: time-ts: rm unused func broadcast_timer_setup()
  blackfin: i2c-lcd: change default clock rate
  blackfin: mac: dsa: add vlan mask in board file
  blackfin: bf537: change num_chipselect for spi-sport
  blackfin: serial: bfin-uart: remove unused field
  bf54x: get mem size: missing break in switch
  blackfin: smp: fix msg queue overflow issue
  blackfin: config: update macro SPI_BFIN in board file
  blackfin: config: update def config for all boards
  blackfin: smp: cleanup smp code
  blackfin: smp: add suspend and wakeup irq flags
  blackfin: bf533-stamp: add missed patches for new asoc driver
  blackfin: bf533-stamp: fix ad1836 name

* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c
  writeback: balanced_rate cannot exceed write bandwidth
  writeback: do strict bdi dirty_exceeded
  writeback: avoid tiny dirty poll intervals
  writeback: max, min and target dirty pause time
  writeback: dirty ratelimit - think time compensation
  btrfs: fix dirtied pages accounting on sub-page writes
  writeback: fix dirtied pages accounting on redirty
  writeback: fix dirtied pages accounting on sub-page writes
  writeback: charge leaked page dirties to active tasks
  writeback: Include all dirty inodes in background writeback