- 15 Nov, 2007 40 commits
-
-
Christian Borntraeger authored
We have seen ramdisk based install systems, where some pages of mapped libraries and programs were suddendly zeroed under memory pressure. This should not happen, as the ramdisk avoids freeing its pages by keeping them dirty all the time. It turns out that there is a case, where the VM makes a ramdisk page clean, without telling the ramdisk driver. On memory pressure shrink_zone runs and it starts to run shrink_active_list. There is a check for buffer_heads_over_limit, and if true, pagevec_strip is called. pagevec_strip calls try_to_release_page. If the mapping has no releasepage callback, try_to_free_buffers is called. try_to_free_buffers has now a special logic for some file systems to make a dirty page clean, if all buffers are clean. Thats what happened in our test case. The simplest solution is to provide a noop-releasepage callback for the ramdisk driver. This avoids try_to_free_buffers for ramdisk pages. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Nick Piggin <npiggin@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Brownell authored
The tle62x0 driver was ignoring all read errors. This patch makes it pass such errors up the stack, instead of returning bogus data. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Adrian Bunk authored
Fix obvious NULL dereferences spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Adrian Bunk authored
Commit ef8b4520 added one NULL check for "p" in krealloc(), but that doesn't seem to be enough since there doesn't seem to be any guarantee that memcpy(ret, NULL, 0) works (spotted by the Coverity checker). For making it clearer what happens this patch also removes the pointless min(). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Adrian Bunk authored
Fix an obvious use-after-free spotted by the Coverity checker. Signed-off-by:
-
Bjorn Helgaas authored
"Luming Yu" <luming.yu@gmail.com> says: There is a "ttyS1 irq is -1" problem observed on tiger4 which cause the serial port broken. It is because that there is __no__ ACPI IRQ resource assigned for the serial port. So the value of the IRQ for the port is never changed since it got initialized to -1. If PNP supplies a valid IRQ, use it. Otherwise, leave port.irq == 0, which means "no IRQ" to the serial core. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yu Luming <luming.yu@intel.com> Acked-by:
Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Darrick J. Wong authored
The i5000_edac driver's PCI registration structure has the name ""i5000_edac"" (with extra set of double-quotes) which is probably not intentional. Get rid of __stringify. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by:
-
Bjorn Helgaas authored
Firmware like PNPBIOS or ACPI can report the address space consumed by the RTC. The actual space consumed may be less than the size (RTC_IO_EXTENT) assumed by the RTC driver. The PNP core doesn't request resources yet, but I'd like to make it do so. If/when it does, the RTC_IO_EXTENT request may fail, which prevents the RTC driver from loading. Since we only use the RTC index and data registers at RTC_PORT(0) and RTC_PORT(1), we can fall back to requesting just enough space for those. If the PNP core requests resources, this results in typical I/O port usage like this: 0070-0073 : 00:06 <-- PNP device 00:06 responds to 70-73 0070-0071 : rtc <-- RTC driver uses only 70-71 instead of the current: 0070-0077 : rtc <-- RTC_IO_EXTENT == 8 Signed-off-by: -
Bjorn Helgaas authored
The misc_register() error path always released an I/O port region, even if the region was memory-mapped (only mips uses memory-mapped RTC, as far as I can see). Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Fengguang Wu authored
This is not a new problem in 2.6.23-git17. 2.6.22/2.6.23 is buggy in the same way. Reiserfs could accumulate dirty sub-page-size files until umount time. They cannot be synced to disk by pdflush routines or explicit `sync' commands. Only `umount' can do the trick. The direct cause is: the dirty page's PG_dirty is wrongly _cleared_. Call trace: [<ffffffff8027e920>] cancel_dirty_page+0xd0/0xf0 [<ffffffff8816d470>] :reiserfs:reiserfs_cut_from_item+0x660/0x710 [<ffffffff8816d791>] :reiserfs:reiserfs_do_truncate+0x271/0x530 [<ffffffff8815872d>] :reiserfs:reiserfs_truncate_file+0xfd/0x3b0 [<ffffffff8815d3d0>] :reiserfs:reiserfs_file_release+0x1e0/0x340 [<ffffffff802a187c>] __fput+0xcc/0x1b0 [<ffffffff802a1ba6>] fput+0x16/0x20 [<ffffffff8029e676>] filp_close+0x56/0x90 [<ffffffff8029fe0d>] sys_close+0xad/0x110 [<ffffffff8020c41e>] system_call+0x7e/0x83 Fix the bug by removing the cancel_dirty_page() call. Tests show that it causes no bad behaviors on various write sizes. === for the patient === Here are more detailed demonstrations of the problem. 1) the page has both PG_dirty(D)/PAGECACHE_TAG_DIRTY(d) after being written to; and then only PAGECACHE_TAG_DIRTY(d) remains after the file is closed. ------------------------------ screen 0 ------------------------------ [T0] root /home/wfg# cat > /test/tiny [T1] hi [T2] root /home/wfg# ------------------------------ screen 1 ------------------------------ [T1] root /home/wfg# echo /test/tiny > /proc/filecache [T1] root /home/wfg# cat /proc/filecache # file /test/tiny # flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback # idx len state refcnt 0 1 ___UD__Bd_ 2 [T2] root /home/wfg# cat /proc/filecache # file /test/tiny # flags R:referenced A:active M:mmap U:uptodate D:dirty W:writeback O:owner B:buffer d:dirty w:writeback # idx len state refcnt 0 1 ___U___Bd_ 2 2) note the non-zero 'cancelled_write_bytes' after /tmp/hi is copied. ------------------------------ screen 0 ------------------------------ [T0] root /home/wfg# echo hi > /tmp/hi [T1] root /home/wfg# cp /tmp/hi /dev/stdin /test [T2] hi [T3] root /home/wfg# ------------------------------ screen 1 ------------------------------ [T1] root /proc/4397# cd /proc/`pidof cp` [T1] root /proc/4713# cat io rchar: 8396 wchar: 3 syscr: 20 syscw: 1 read_bytes: 0 write_bytes: 20480 cancelled_write_bytes: 4096 [T2] root /proc/4713# cat io rchar: 8399 wchar: 6 syscr: 21 syscw: 2 read_bytes: 0 write_bytes: 24576 cancelled_write_bytes: 4096 //Question: the 'write_bytes' is a bit more than expected ;-) Tested-by:Maxim Levitsky <maximlevitsky@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Fengguang Wu <wfg@mail.ustc.edu.cn> Reviewed-by:
Chris Mason <chris.mason@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Shannon Nelson authored
Add support for version 2 of the ioatdma device. This device handles the descriptor chain and DCA services slightly differently: - Instead of moving the dma descriptors between a busy and an idle chain, this new version uses a single circular chain so that we don't have rewrite the next_descriptor pointers as we add new requests, and the device doesn't need to re-read the last descriptor. - The new device has the DCA tags defined internally instead of needing them defined statically. Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by:
-
Mathieu Desnoyers authored
Add the field names to marker example format string. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
-
Mathieu Desnoyers authored
Describes the format string standard further: Use of field names before the type specifiers.. Signed-off-by:
-
Mathieu Desnoyers authored
Upon module load, we must take the markers mutex. It implies that the marker mutex must be nested inside the module mutex. It implies changing the nesting order : now the marker mutex nests inside the module mutex. Make the necessary changes to reverse the order in which the mutexes are taken. Includes some cleanup from Dave Hansen <haveblue@us.ibm.com>. Signed-off-by:
-
Dmitri Vorobiev authored
I found a few bugs in the BFS driver. Detailed description of the bugs as well as the steps to reproduce the errors are given in the kernel bugzilla. Please follow these links for more information: http://bugzilla.kernel.org/show_bug.cgi?id=9363 http://bugzilla.kernel.org/show_bug.cgi?id=9364 http://bugzilla.kernel.org/show_bug.cgi?id=9365 http://bugzilla.kernel.org/show_bug.cgi?id=9366 This patch fixes the bugs described above. Besides, the patch introduces coding style changes to make the BFS driver conform to the requirements specified for Linux kernel code. Finally, I made a few cosmetic changes such as removal of trivial debug output. Also, the patch removes the fields `si_lf_ioff' and `si_lf_sblk' of the in-core superblock structure. These fields are initialized but never actually used. If you are wondering why I need BFS, here is the answer: I am using this driver in the context of Linux kernel classes I am teaching in the Moscow State University and in the International Institute of Information Technology in Pune, India. Signed-off-by:
Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Cc: Tigran Aivazian <tigran@veritas.com> Signed-off-by:
-
Andrew Morton authored
Revert 62d0df64. This was originally intended as a simple initial example of how to create a control groups subsystem; it wasn't intended for mainline, but I didn't make this clear enough to Andrew. The CFS cgroup subsystem now has better functionality for the per-cgroup usage accounting (based directly on CFS stats) than the "usage" status file in this patch, and the "load" status file is rather simplistic - although having a per-cgroup load average report would be a useful feature, I don't believe this patch actually provides it. If it gets into the final 2.6.24 we'd probably have to support this interface for ever. Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Ken Chen authored
For administrative purpose, we want to query actual block usage for hugetlbfs file via fstat. Currently, hugetlbfs always return 0. Fix that up since kernel already has all the information to track it properly. Signed-off-by:
Ken Chen <kenchen@google.com> Acked-by:
Adam Litke <agl@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Adrian Bunk authored
return_unused_surplus_pages() can become static. Signed-off-by:
-
Adam Litke authored
When a MAP_SHARED mmap of a hugetlbfs file succeeds, huge pages are reserved to guarantee no problems will occur later when instantiating pages. If quotas are in force, page instantiation could fail due to a race with another process or an oversized (but approved) shared mapping. To prevent these scenarios, debit the quota for the full reservation amount up front and credit the unused quota when the reservation is released. Signed-off-by:
-
Adam Litke authored
Add a second parameter 'delta' to hugetlb_get_quota and hugetlb_put_quota to allow bulk updating of the sbinfo->free_blocks counter. This will be used by the next patch in the series. Signed-off-by:
-
Adam Litke authored
Now that quota is credited by free_huge_page(), calls to hugetlb_get_quota() seem out of place. The alloc/free API is unbalanced because we handle the hugetlb_put_quota() but expect the caller to open-code hugetlb_get_quota(). Move the get inside alloc_huge_page to clean up this disparity. This patch has been kept apart from the previous patch because of the somewhat dodgy ERR_PTR() use herein. Moving the quota logic means that alloc_huge_page() has two failure modes. Quota failure must result in a SIGBUS while a standard allocation failure is OOM. Unfortunately, ERR_PTR() doesn't like the small positive errnos we have in VM_FAULT_* so they must be negated before they are used. Does anyone take issue with the way I am using PTR_ERR. If so, what are your thoughts on how to clean this up (without needing an if,else if,else block at each alloc_huge_page() callsite)? Signed-off-by:
-
Adam Litke authored
The hugetlbfs quota management system was never taught to handle MAP_PRIVATE mappings when that support was added. Currently, quota is debited at page instantiation and credited at file truncation. This approach works correctly for shared pages but is incomplete for private pages. In addition to hugetlb_no_page(), private pages can be instantiated by hugetlb_cow(); but this function does not respect quotas. Private huge pages are treated very much like normal, anonymous pages. They are not "backed" by the hugetlbfs file and are not stored in the mapping's radix tree. This means that private pages are invisible to truncate_hugepages() so that function will not credit the quota. This patch (based on a prototype provided by Ken Chen) moves quota crediting for all pages into free_huge_page(). page->private is used to store a pointer to the mapping to which this page belongs. This is used to credit quota on the appropriate hugetlbfs instance. Signed-off-by:
-
Adam Litke authored
Hugetlbfs implements a quota system which can limit the amount of memory that can be used by the filesystem. Before allocating a new huge page for a file, the quota is checked and debited. The quota is then credited when truncating the file. I found a few bugs in the code for both MAP_PRIVATE and MAP_SHARED mappings. Before detailing the problems and my proposed solutions, we should agree on a definition of quotas that properly addresses both private and shared pages. Since the purpose of quotas is to limit total memory consumption on a per-filesystem basis, I argue that all pages allocated by the fs (private and shared) should be charged against quota. Private Mappings ================ The current code will debit quota for private pages sometimes, but will never credit it. At a minimum, this causes a leak in the quota accounting which renders the accounting essentially useless as it is. Shared pages have a one to one mapping with a hugetlbfs file and are easy to account by debiting on allocation and crediting on truncate. Private pages are anonymous in nature and have a many to one relationship with their hugetlbfs files (due to copy on write). Because private pages are not indexed by the mapping's radix tree, thier quota cannot be credited at file truncation time. Crediting must be done when the page is unmapped and freed. Shared Pages ============ I discovered an issue concerning the interaction between the MAP_SHARED reservation system and quotas. Since quota is not checked until page instantiation, an over-quota mmap/reservation will initially succeed. When instantiating the first over-quota page, the program will receive SIGBUS. This is inconsistent since the reservation is supposed to be a guarantee. The solution is to debit the full amount of quota at reservation time and credit the unused portion when the reservation is released. This patch series brings quotas back in line by making the following modifications: * Private pages - Debit quota in alloc_huge_page() - Credit quota in free_huge_page() * Shared pages - Debit quota for entire reservation at mmap time - Credit quota for instantiated pages in free_huge_page() - Credit quota for unused reservation at munmap time This patch: The shared page reservation and dynamic pool resizing features have made the allocation of private vs. shared huge pages quite different. By splitting out the private/shared-specific portions of the process into their own functions, readability is greatly improved. alloc_huge_page now calls the proper helper and performs common operations. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by:
-
Dan Williams authored
<debug output from Joel's system> handling stripe 7629696, state=0x14 cnt=1, pd_idx=2 ops=0:0:0 check 5: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ffcffcc0 written 0000000000000000 check 4: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fdd4e360 written 0000000000000000 check 3: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000 check 2: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000 check 1: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ff517e40 written 0000000000000000 check 0: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fd4cae60 written 0000000000000000 locked=4 uptodate=2 to_read=0 to_write=4 failed=0 failed_num=0 for sector 7629696, rmw=0 rcw=0 </debug> These blocks were prepared to be written out, but were never handled in ops_run_biodrain(), so they remain locked forever. The operations flags are all clear which means handle_stripe() thinks nothing else needs to be done. This state suggests that the STRIPE_OP_PREXOR bit was sampled 'set' when it should not have been. This patch cleans up cases where the code looks at sh->ops.pending when it should be looking at the consistent stack-based snapshot of the operations flags. Report from Joel: Resync done. Patch fix this bug. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Tested-by:
Joel Bertrand <joel.bertrand@systella.fr> Cc: <stable@kernel.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
Adam Litke authored
When calling get_user_pages(), a write flag is passed in by the caller to indicate if write access is required on the faulted-in pages. Currently, follow_hugetlb_page() ignores this flag and always faults pages for read-only access. This can cause data corruption because a device driver that calls get_user_pages() with write set will not expect COW faults to occur on the returned pages. This patch passes the write flag down to follow_hugetlb_page() and makes sure hugetlb_fault() is called with the right write_access parameter. [ezk@cs.sunysb.edu: build fix] Signed-off-by:
Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by:
-
David Brownell authored
Remove annoying build warnings about unused variables in atmel_serial, which afflict both AT91 and AVR32 builds. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Haavard Skinnemoen authored
When a DMA device is unregistered, its reference count is decremented twice for each channel: Once dma_class_dev_release() and once in dma_chan_cleanup(). This may result in the DMA device driver's remove() function completing before all channels have been cleaned up, causing lots of use-after-free fun. Fix it by incrementing the device's reference count twice for each channel during registration. [dan.j.williams@intel.com: kill unnecessary client refcounting] Signed-off-by:
-
Julia Lawall authored
Move pci_dev_put outside the loops in which it occurs. Within the loop, pci_dev_put is done implicitly by pci_get_device. The problem was detected using the following semantic patch, and corrected by hand. @@ expression dev; expression E; @@ - pci_dev_put(dev) ... when != dev = E - pci_get_device(...,dev) Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Ondrej Zary authored
The pf driver for parallel port floppy drives seems to be broken. At least with Imation SuperDisk with EPAT chip, the driver calls pi_connect() and pi_disconnect after each transferred sector. At least with EPAT, this operation is very expensive - causes drive recalibration. Thus, transferring even a single byte (dd if=/dev/pf0 of=/dev/null bs=1 count=1) takes 20 seconds, making the driver useless. The pf_next_buf() function seems to be broken as it returns 1 always (except when pf_run is non-zero), causing the loop in do_pf_read_drq (and do_pf_write_drq) to be executed only once. The following patch fixes this problem. It also fixes swapped descriptions in pf_lock() function and removes DBMSG macro, which seems useless. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Atsushi Nemoto authored
Some error paths in txx9spi_probe wrongly return 0. This patch fixes them by using the devres interfaces. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Atsushi Nemoto authored
After 49dce689, device_for_each_child iteration hits the master device itself. Do not call spi_unregister_device() for the master device. Signed-off-by:
-
Andrew Morton authored
Zillions of people are getting my-battery-monitor-doesnt-work problems (including me). Lessen the damage by making ACPI_PROCFS default to on. Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Yasunori Goto authored
i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY. But ia64 registers it as IORESOURCE_MEM only. In addition, memory hotplug code registers new memory as IORESOURCE_MEM too. This difference causes a failure of memory unplug of x86-64. This patch fixes it. This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI device. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Peter Zijlstra authored
We allow violation of bdi limits if there is a lot of room on the system. Once we hit half the total limit we start enforcing bdi limits and bdi ramp-up should happen. Doing it this way avoids many small writeouts on an otherwise idle system and should also speed up the ramp-up. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
-
Balbir Singh authored
Update the getdelays utility to become cgroupstats aware. A new -C option has been added. It takes in a control group path and prints out a summary of the states of tasks in the control group Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
We should unset migrate type "ISOLATE" when we successfully removed memory. But current code has BUG and cannot works well. This patch also includes bugfix? to change get_pageblock_flags to get_pageblock_migratetype(). Thanks to Badari Pulavarty for finding this. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
-
Lee Schermerhorn authored
We hit the BUG_ON() in mm/rmap.c:vma_address() when trying to migrate via mbind(MPOL_MF_MOVE) a non-anon region that spans multiple vmas. For anon-regions, we just fail to migrate any pages beyond the 1st vma in the range. This occurs because do_mbind() collects a list of pages to migrate by calling check_range(). check_range() walks the task's mm, spanning vmas as necessary, to collect the migratable pages into a list. Then, do_mbind() calls migrate_pages() passing the list of pages, a function to allocate new pages based on vma policy [new_vma_page()], and a pointer to the first vma of the range. For each page in the list, new_vma_page() calls page_address_in_vma() passing the page and the vma [first in range] to obtain the address to get for alloc_page_vma(). The page address is needed to get interleaving policy correct. If the pages in the list come from multiple vmas, eventually, new_page_address() will pass that page to page_address_in_vma() with the incorrect vma. For !PageAnon pages, this will result in a bug check in rmap.c:vma_address(). For anon pages, vma_address() will just return EFAULT and fail the migration. This patch modifies new_vma_page() to check the return value from page_address_in_vma(). If the return value is EFAULT, new_vma_page() searchs forward via vm_next for the vma that maps the page--i.e., that does not return EFAULT. This assumes that the pages in the list handed to migrate_pages() is in address order. This is currently case. The patch documents this assumption in a new comment block for new_vma_page(). If new_vma_page() cannot locate the vma mapping the page in a forward search in the mm, it will pass a NULL vma to alloc_page_vma(). This will result in the allocation using the task policy, if any, else system default policy. This situation is unlikely, but the patch documents this behavior with a comment. Note, this patch results in restarting from the first vma in a multi-vma range each time new_vma_page() is called. If this is not acceptable, we can make the vma argument a pointer, both in new_vma_page() and it's caller unmap_and_move() so that the value held by the loop in migrate_pages() always passes down the last vma in which a page was found. This will require changes to all new_page_t functions passed to migrate_pages(). Is this necessary? For this patch to work, we can't bug check in vma_address() for pages outside the argument vma. This patch removes the BUG_ON(). All other callers [besides new_vma_page()] already check the return status. Tested on x86_64, 4 node NUMA platform. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by:
-
Eric W. Biederman authored
It appears we overlooked support for removing generic proc files when we added support for multiple proc super blocks. Handle that now. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Cc: Alexey Dobriyan <adobriyan@sw.ru> Acked-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Damian Jurd authored
The following is an extra entry to enable the touch screen on the new LG C1 EXPRESS DUAL machine. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Adrian Bunk authored
This patch fixes the possible usage of a negative value as an array index spotted by the Coverity checker. sisfb_validate_mode() could return a negative error code and we must check for that prior to using its return value as an array index. Signed-off-by:
-
