Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:

  [root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
  /root/.perfconfig
  [root@doppio linux-2.6-tip]# cat /root/.perfconfig
  [tui]

  report = off
  [root@doppio linux-2.6-tip]#

System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Perf record repeatedly calls gettimeofday() which adds noise to the performance
measurements.  Since gettimeofday() is only used for the error printf, delete
it.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100518225240.GC25589@sgi.com>
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core

Accessing trace values of an 8 size may end up in a segfault
on archs that can't deal with misaligned access, which is the
case for sparc 64. This is because PERF_SAMPLE_RAW are aligned
to 4 and not to 8.

Fix this on the macros that get the values of 8 size.

This fixes segfaults on perf tools in sparc 64.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: David Miller <davem@davemloft.net>

The software events hlist doesn't fully comply with the new
rcu checks api.

We need to consider three different sides that access the hlist:

- the hlist allocation/release side. This side happens when an
  events is created or released, accesses to the hlist are
  serialized under the cpuctx mutex.

- the events insertion/removal in the hlist. This side is always
  serialized against the above one. The hlist is always present
  during such operations. This side happens when a software event
  is scheduled in/out. The serialization that ensures the software
  event is really attached to the context is made under the
  ctx->lock.

- events triggering. This is the read side, it can happen
  concurrently with any update side.

This patch deals with them one by one and anticipates with the
separate rcu mem space patches in preparation.

This patch fixes various annoying rcu warnings.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

This is a small fix for a problem affecting live-mode, introduced
recently:

root@tropicana:~# perf trace rwtop
perf trace started with Perl
script /root/libexec/perf-core/scripts/perl/rwtop.pl

  Fatal: did not read header event

commit d00a47cc added a skip()
function to skip over e.g. header_page, but this doesn't work for
live mode.  This patch re-implements skip() to use read() instead of
lseek() to fix that.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1273032130.6383.28.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.

Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: Tom Zanussi <tzanussi@gmail.com>
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In __dsos__read_build_ids if the dso already had its build-id read,
don't try again.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Should be there for the sake of RAW events.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.354345151@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This snippet somehow escaped the commit:

 | commit 137351e0
 | Author: Cyrill Gorcunov <gorcunov@openvz.org>
 | Date:   Sat May 8 15:25:52 2010 +0400
 |
 |    x86, perf: P4 PMU -- protect sensible procedures from preemption

so bring it eventually back. It helps to catch
preemption issue (if there will be, rule of thumb --
don't use raw_ if you can).
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.167259349@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

To prevent from clashes in future code modifications
do a real check for ESCR address being in hash. At
moment the callers are known to pass sane values but
better to be on a safe side.

And comment fix.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100518212439.004503600@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

All the functions that call this can handle the equivalent, non
panic'ing wrapped routines.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Functions that were calling xzalloc also returned -1 when, for other
reasons, it could fail, and the calleds are coping with failures, so
stop using die() and xzalloc().

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

That could leave filedescriptors open and leak memory. Also stop using
xmalloc, use malloc and handle results just like other error cases in
the same routine that used it.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Without the bloated cplus_demangle from binutils, i.e building with:

$ make NO_DEMANGLE=1 O=~acme/git/build/perf -j3 -C tools/perf/ install

Before:

   text	   data	    bss	    dec	    hex	filename
 471851	  29280	4025056	4526187	 45106b	/home/acme/bin/perf

After:

[acme@doppio linux-2.6-tip]$ size ~/bin/perf
   text	   data	    bss	    dec	    hex	filename
 446886	  29232	4008576	4484694	 446e56	/home/acme/bin/perf

So its a 5.3% size reduction in code, but the interesting part is in the git
diff --stat output:

 19 files changed, 20 insertions(+), 1909 deletions(-)

If we ever need some of the things we got from git but weren't using, we just
have to go to the git repo and get fresh, uptodate source code bits.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It is hard to read very large numbers so provide an option to perf stat
to separate thousands using a separator. The patch leverages the locale
support of stdio. You need to set your LC_NUMERIC appropriately, for
instance LC_NUMERIC=en_US.UTF8. You need to pass -B to activate this
feature. This way existing scripts parsing the output do not need to be
changed. Here is an example.

$ perf stat noploop 2
noploop for 2 seconds

 Performance counter stats for 'noploop 2':

        1998.347031  task-clock-msecs         #      0.998 CPUs
                 61  context-switches         #      0.000 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                118  page-faults              #      0.000 M/sec
      4,138,410,900  cycles                   #   2070.917 M/sec  (scaled from 70.01%)
      2,062,650,268  instructions             #      0.498 IPC    (scaled from 70.01%)
      2,057,653,466  branches                 #   1029.678 M/sec  (scaled from 70.01%)
             40,267  branch-misses            #      0.002 %      (scaled from 30.04%)
      2,055,961,348  cache-references         #   1028.831 M/sec  (scaled from 30.03%)
             53,725  cache-misses             #      0.027 M/sec  (scaled from 30.02%)

        2.001393933  seconds time elapsed

$ perf stat -B  noploop 2
noploop for 2 seconds

 Performance counter stats for 'noploop 2':

        1998.297883  task-clock-msecs         #      0.998 CPUs
                 59  context-switches         #      0.000 M/sec
                  0  CPU-migrations           #      0.000 M/sec
                119  page-faults              #      0.000 M/sec
      4,131,380,160  cycles                   #   2067.450 M/sec  (scaled from 70.01%)
      2,059,096,507  instructions             #      0.498 IPC    (scaled from 70.01%)
      2,054,681,303  branches                 #   1028.216 M/sec  (scaled from 70.01%)
             25,650  branch-misses            #      0.001 %      (scaled from 30.05%)
      2,056,283,014  cache-references         #   1029.017 M/sec  (scaled from 30.03%)
             47,097  cache-misses             #      0.024 M/sec  (scaled from 30.02%)

        2.001391016  seconds time elapsed

Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4bf28fe8.914ed80a.01ca.fffff5f5@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Convert to the transactional PMU API and remove the duplication of
group_sched_in().

[cross build only]
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272002193.5707.65.camel@minggr.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: uv_irq.c: Fix all sparse warnings
  x86, UV: Improve BAU performance and error recovery
  x86, UV: Delete unneeded boot messages
  x86, UV: Clean up UV headers for MMR definitions

Since the x86 XCHG ins implies LOCK, avoid the use by
using a sequence count instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since there is now only a single writer, we can use
local_t instead and avoid all these pesky LOCK insn.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since we can now assume there is only a single writer
to each buffer, we can remove per-cpu lock thingy and
use a simply nest-count to the same effect.

This removes the need to disable IRQs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Since we now have working per-task-per-cpu events for
a while, disallow mmap() on per-task inherited
events. Those things were a performance problem
anyway, and doing away with it allows us to optimize
the buffer somewhat by assuming there is only a
single writer.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ensure cpu bound buffers live on the right NUMA node.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1274114880.5605.5236.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In case the sampling buffer has no "payload" pages,
nr_pages is 0. The problem is that the error path in
perf_output_begin() skips to a label which assumes
perf_output_lock() has been issued which is not the
case. That triggers a WARN_ON() in
perf_output_unlock().

This patch fixes the problem by skipping
perf_output_unlock() in case data->nr_pages is 0.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4bf13674.014fd80a.6c82.ffffb20c@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tboot: Add support for S3 memory integrity protection

* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: Update the page flags for memtype atomically instead of using memtype_lock
  x86, pat: In rbt_memtype_check_insert(), update new->type only if valid
  x86, pat: Migrate to rbtree only backend for pat memtype management
  x86, pat: Preparatory changes in pat.c for bigger rbtree change
  rbtree: Add support for augmented rbtrees

Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mrst: add nop functions to x86_init mpparse functions
  x86, mrst, pci: return 0 for non-present pci bars
  x86: Avoid check hlt for newer cpus

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: Combine SRAT regions when possible

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/microcode: Use nonseekable_open()
  x86: Improve Intel microcode loader performance

Merge branch 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hweight: Use a 32-bit popcnt for __arch_hweight32()
  arch, hweight: Fix compilation errors
  x86: Add optimized popcnt variants
  bitops: Optimize hweight() by making use of compile-time evaluation

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, acpi/irq: Define gsi_end when X86_IO_APIC is undefined
  x86, irq: Kill io_apic_renumber_irq
  x86, acpi/irq: Handle isa irqs that are not identity mapped to gsi's.
  x86, ioapic: Simplify probe_nr_irqs_gsi.
  x86, ioapic: Optimize pin_2_irq
  x86, ioapic: Move nr_ioapic_registers calculation to mp_register_ioapic.
  x86, ioapic: In mpparse use mp_register_ioapic
  x86, ioapic: Teach mp_register_ioapic to compute a global gsi_end
  x86, ioapic: Fix the types of gsi values
  x86, ioapic: Fix io_apic_redir_entries to return the number of entries.
  x86, ioapic: Only export mp_find_ioapic and mp_find_ioapic_pin in io_apic.h
  x86, acpi/irq: Generalize mp_config_acpi_legacy_irqs
  x86, acpi/irq: Fix acpi_sci_ioapic_setup so it has both bus_irq and gsi
  x86, acpi/irq: pci device dev->irq is an isa irq not a gsi
  x86, acpi/irq: Teach acpi_get_override_irq to take a gsi not an isa_irq
  x86, acpi/irq: Introduce apci_isa_irq_to_gsi

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, fpu: Use static_cpu_has() to implement use_xsave()
  x86: Add new static_cpu_has() function using alternatives
  x86, fpu: Use the proper asm constraint in use_xsave()
  x86, fpu: Unbreak FPU emulation
  x86: Introduce 'struct fpu' and related API
  x86: Eliminate TS_XSAVE
  x86-32: Don't set ignore_fpu_irq in simd exception
  x86: Merge kernel_math_error() into math_error()
  x86: Merge simd_math_error() into math_error()
  x86-32: Rework cache flush denied handler

Fix trivial conflict in arch/x86/kernel/process.c

* 'x86-doc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, docbook: Fix errors from x86 headers merger

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hypervisor: add missing <linux/module.h>
  Modify the VMware balloon driver for the new x86_hyper API
  x86, hypervisor: Export the x86_hyper* symbols
  x86: Clean up the hypervisor layer
  x86, HyperV: fix up the license to mshyperv.c
  x86: Detect running on a Microsoft HyperV system
  x86, cpu: Make APERF/MPERF a normal table-driven flag
  x86, k8: Fix build error when K8_NB is disabled
  x86, cacheinfo: Disable index in all four subcaches
  x86, cacheinfo: Make L3 cache info per node
  x86, cacheinfo: Reorganize AMD L3 cache structure
  x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments
  x86, cacheinfo: Unify AMD L3 cache index disable checking
  cpufreq: Unify sysfs attribute definition macros
  powernow-k8: Fix frequency reporting
  x86, cpufreq: Add APERF/MPERF support for AMD processors
  x86: Unify APERF/MPERF support
  powernow-k8: Add core performance boost support
  x86, cpu: Add AMD core boosting feature flag to /proc/cpuinfo

Fix up trivial conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c and
drivers/cpufreq/cpufreq_ondemand.c

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clean up arch/x86/Kconfig*
  x86-64: Don't export init_level4_pgt

Merge branch 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix LOCK_PREFIX_HERE for uniprocessor build
  x86, atomic64: In selftest, distinguish x86-64 from 586+
  x86-32: Fix atomic64_inc_not_zero return value convention
  lib: Fix atomic64_inc_not_zero test
  lib: Fix atomic64_add_unless return value convention
  x86-32: Fix atomic64_add_unless return value convention
  lib: Fix atomic64_add_unless test
  x86: Implement atomic[64]_dec_if_positive()
  lib: Only test atomic64_dec_if_positive on archs having it
  x86-32: Rewrite 32-bit atomic64 functions in assembly
  lib: Add self-test for atomic64_t
  x86-32: Allow UP/SMP lock replacement in cmpxchg64
  x86: Add support for lock prefix in alternatives

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Use .cfi_sections for assembly code
  x86-64: Reduce SMP locks table size
  x86, asm: Introduce and use percpu_inc()

Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix "integer as NULL pointer" warning.
  tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
  tracing: Make the documentation clear on trace_event boot option
  ring-buffer: Wrap open-coded WARN_ONCE
  tracing: Convert nop macros to static inlines
  tracing: Fix sleep time function profiling
  tracing: Show sample std dev in function profiling
  tracing: Add documentation for trace commands mod, traceon/traceoff
  ring-buffer: Make benchmark handle missed events
  ring-buffer: Make non-consuming read less expensive with lots of cpus.
  tracing: Add graph output support for irqsoff tracer
  tracing: Have graph flags passed in to ouput functions
  tracing: Add ftrace events for graph tracer
  tracing: Dump either the oops's cpu source or all cpus buffers
  tracing: Fix uninitialized variable of tracing/trace output

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
  sched, wait: Use wrapper functions
  sched: Remove a stale comment
  ondemand: Make the iowait-is-busy time a sysfs tunable
  ondemand: Solve a big performance issue by counting IOWAIT time as busy
  sched: Intoduce get_cpu_iowait_time_us()
  sched: Eliminate the ts->idle_lastupdate field
  sched: Fold updating of the last_update_time_info into update_ts_time_stats()
  sched: Update the idle statistics in get_cpu_idle_time_us()
  sched: Introduce a function to update the idle statistics
  sched: Add a comment to get_cpu_idle_time_us()
  cpu_stop: add dummy implementation for UP
  sched: Remove rq argument to the tracepoints
  rcu: need barrier() in UP synchronize_sched_expedited()
  sched: correctly place paranioa memory barriers in synchronize_sched_expedited()
  sched: kill paranoia check in synchronize_sched_expedited()
  sched: replace migration_thread with cpu_stop
  stop_machine: reimplement using cpu_stop
  cpu_stop: implement stop_cpu[s]()
  sched: Fix select_idle_sibling() logic in select_task_rq_fair()
  ...