- 02 Nov, 2022 16 commits
-
-
Deepak R Varma authored
struct p80211macarray is defined but is never used. Remove the unused struct declaration. Issue identified as part of coccicheck based code analysis. Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com> Suggested-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Deepak R Varma <drv@mailo.com> Link: https://lore.kernel.org/r/b42eff9b8f73542bc9015948e5e4684416982e1b.1667308828.git.drv@mailo.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Deepak R Varma authored
Pointer reference to struct wlan_ie_ibss_parms is added as a member variable to 2 structures; However, these references are never used. Remove such unused struct references. The cleanup also renders the struct useless; so remove it as well. Issue identified as part of coccicheck based code analysis. Suggested-by:
-
Deepak R Varma authored
Pointer reference to struct wlan_ie_tim is added as a member variable of a structure; However, this references is never used. Remove such unused struct reference. The cleanup also renders the struct useless; so remove it as well. Issue identified as part of coccicheck based code analysis. Suggested-by:
-
Deepak R Varma authored
Pointer reference to struct wlan_ie_supp_rates is added as a member variable to 7 different structures. However, these references are never used. Remove such unused struct references. The cleanup also renders the struct useless; so remove it as well. Issue identified as part of coccicheck based code analysis. Suggested-by:
-
Deepak R Varma authored
Pointer reference to struct wlan_ie_ssid is added as a member variable to 5 different structures. However, these references are never used. Remove such unused struct references. The cleanup also renders the struct useless; so remove it as well. Issue identified as part of coccicheck based code analysis. Suggested-by:
-
Michael Straube authored
The function rtw_free_stainfo() returns always _SUCCESS and none of its callers uses the return value. We can safely make the function void. Yet another tiny step towards getting rid of _FAIL / _SUCCESS. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20221101191458.8619-3-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
Declaring function prototypes extern is redundant and triggers checkpatch warnings. Remove all extern from function prototypes. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Deepak R Varma authored
This driver is a single standalone driver and does not have any loading dependencies on another associated drivers. The build results in one single .ko object. The current implementation of the function ieee80211_tkip_null simply returns back to the caller without any useful instruction executions. It does not lead to auto-loading of any other associated modules as the initial design implementation appears to be. Hence the call to ieee80211_tkip_null() and its implementation is unnecessary and should be removed. Signed-off-by:
-
Gabhyun Kim authored
Remove redundant line break in function definition to correct coding style. Signed-off-by:
Gabhyun Kim <kimgaby415@gmail.com> Link: https://lore.kernel.org/r/20221101062636.GA3257@ubuntuSigned-off-by:
-
Geert Uytterhoeven authored
On 32-bit without physical address extensions (e.g. sh-allmodconfig): drivers/staging/octeon/ethernet-mem.c: In function ‘cvm_oct_free_hw_memory’: ./arch/sh/include/asm/io.h:239:32: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 239 | #define phys_to_virt(address) ((void *)(address)) | ^ drivers/staging/octeon/ethernet-mem.c:123:18: note: in expansion of macro ‘phys_to_virt’ 123 | fpa = (char *)phys_to_virt(cvmx_ptr_to_phys(fpa)); | ^~~~~~~~~~~~ Fix this by making cvmx_ptr_to_phys() return physaddr_t instead of uint64_t. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20221101080111.750748-1-geert@linux-m68k.orgSigned-off-by:
-
Tanjuate Brunostar authored
Remove the use of Hungarian notation, which is not used in the Linux kernel. Signed-off-by:
Tanjuate Brunostar <tanjubrunostar0@gmail.com> Link: https://lore.kernel.org/r/Y2DtFRdhCiyNF2kF@elroy-temp-vm.gaiao0uenmiufjlowqgp5yxwdh.gvxx.internal.cloudapp.netSigned-off-by:
-
Martin Kaiser authored
Use ether_addr_equal to compare two mac addresses in OnAction. Both struct ieee80211_mgmt and struct eeprom_priv's mac_addr component are 2-byte aligned. Suggested-by:
Joe Perches <joe@perches.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20221031205140.124682-1-martin@kaiser.cxSigned-off-by:
-
Michael Straube authored
Replace some ternary operators with the min(), max() or abs() macros to improve readability. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Use ieee80211_get_SA in update_recvframe_phyinfo_88e instead of the driver-specific get_sa function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
We can remove the fc variable in update_recvframe_phyinfo_88e and use hdr->frame_control instead. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
We can use ether_addr_equal instead of memcmp in update_recvframe_phyinfo_88e for comparing the incoming frame's destination address with our local address. Both struct ieee80211_hdr and struct eeprom_priv's mac_addr component are 2-byte aligned. Suggested-by:
-
- 31 Oct, 2022 24 commits
-
-
Martin Kaiser authored
All subfunctions of OnAction check if the destination address matches the local interface's address. It's simpler to move this check to OnAction. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Both callers of rtw_action_public_decache pass a u8 value for the token parameter. We can change token from s32 to u8 and remove the code for token < 0. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The only caller of on_action_public_default does not check the return value. We can make it a void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The only caller of on_action_public_vendor does not check the return value. We can make it a void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Use the struct mgmt to read the action_code. This is much simpler than parsing the message ourselves. Add a comment about reading the action code. All members of the action enum start with an action_code byte. It does not matter which member we use. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt in OnAction_p2p and use it to check the destination address. This replaces a call to the driver-specific GetAddr1Ptr function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
OnAction_p2p has a switch-case statement where only a single case is handled. Use if instead, this makes the code shorter and easier to read. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The caller of OnAction_p2p has already checked the action category. We can remove the check in OnAction_p2p. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
OnAction_p2p is called only by OnAction, its return value is not checked. We can make it a static void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
OnAction_back is called only by OnAction, its return value is not checked. We can make it a static void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The on_action_public function is called only by OnAction. This function also lives in rtw_mlme_ext.c and does not check the return value from on_action_public. We can make on_action_public a static void function. The ret variable is no longer needed if we don't return a value. It can be removed. Reported-by:
kernel test robot <lkp@intel.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The caller of on_action_public has already checked the action category. We can remove the check in on_action_public. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt and use it to read the destination address. This replaces one call to the driver-specific GetAddr1Ptr function, which should eventually be removed. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Nam Cao authored
In r8712_init_drv_sw(), whenever any function call returns error, it is returned immediately without properly cleaning up the other successfully executed functions. This can cause memory leak. Instead of return immediately, free all the allocated buffers first. Tested-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Signed-off-by:
Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/0a3414b12031f6cdcba81a8725e91eb9567ff34f.1666688642.git.namcaov@gmail.comSigned-off-by:
-
Nam Cao authored
The return value of _r8712_init_xmit_priv() is never checked and the driver always continue execution as if all is well. This will cause problems if, for example, buffers cannot be allocated and the driver continue and use those buffers. Check for return value of _r8712_init_xmit_priv() and return error (if any) during probing. Tested-by:
-
Nam Cao authored
The function _r8712_init_recv_priv() and also r8712_init_recv_priv() just returns silently if they fail to allocate memory. Change their return type to int and add necessary checks and handling if they return -ENOMEM Tested-by:
-
Nam Cao authored
This reverts commit 5d3da4a2. This commit annotated false positive for kmemleak. The reasoning is that the buffers are freed when the driver is unloaded. However, there is actually potential memory leak when probe fails. Tested-by:
-
Martin Kaiser authored
Replace the last get_da call with ieee80211_get_DA and remove the get_da function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Replace a call to the driver-specific get_da function with ieee80211_get_DA from ieee80211.h. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Aaron Lawrence authored
Rewritten a comparison to NULL with a negation operator in accordance with the Linux kernel coding-style regulations. The fix was directly recommended by the checkpatch script. Tested-by:
Aaron Lawrence <t4rmin@zohomail.com> Link: https://lore.kernel.org/r/ca33296630627020694f4b653580f689a8a3d1c7.1666787061.git.t4rmin@zohomail.comSigned-off-by:
-
Aaron Lawrence authored
Split a multiple assignments statement to individual assignments on different lines in accordance with the Linux kernel coding-style regulations. Also repositioned comments on it and the statement before for increased legibility. The multiple assignments issue was found by the checkpatch script, with the comments legibility issue were through direct observation. Tested-by:
-
Aaron Lawrence authored
Added braces around needed arms of statements which needs them in accordance with the Linux kernel coding-style regulations. The issues were found with the help of the checkpatch script. Tested-by:
-
Aaron Lawrence authored
Aligned multiple lines to be at the same indentation of open parentheses before it in accordance with the Linux kernel coding-style regulations. The issues were found by running the checkpatch script on the file. Tested-by:
-
Aaron Lawrence authored
Removed multiple blank lines that are not necessary before a closing brace. The issues were found with the checkpatch script and were dealt with in accordance with the Linux kernel coding-style guidelines. Tested-by:
-
