- 27 Sep, 2006 40 commits
-
-
Christoph Lameter authored
Now that we have the node in the hot zone of struct zone we can avoid accessing zone_pgdat in zone_statistics. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
We do not need to allocate pagesets for unpopulated zones. Signed-off-by:
-
Christoph Lameter authored
Add the node in order to optimize zone_to_nid. Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Christoph Lameter authored
This patch insures that the slab node lists in the NUMA case only contain slabs that belong to that specific node. All slab allocations use GFP_THISNODE when calling into the page allocator. If an allocation fails then we fall back in the slab allocator according to the zonelists appropriate for a certain context. This allows a replication of the behavior of alloc_pages and alloc_pages node in the slab layer. Currently allocations requested from the page allocator may be redirected via cpusets to other nodes. This results in remote pages on nodelists and that in turn results in interrupt latency issues during cache draining. Plus the slab is handing out memory as local when it is really remote. Fallback for slab memory allocations will occur within the slab allocator and not in the page allocator. This is necessary in order to be able to use the existing pools of objects on the nodes that we fall back to before adding more pages to a slab. The fallback function insures that the nodes we fall back to obey cpuset restrictions of the current context. We do not allocate objects from outside of the current cpuset context like before. Note that the implementation of locality constraints within the slab allocator requires importing logic from the page allocator. This is a mischmash that is not that great. Other allocators (uncached allocator, vmalloc, huge pages) face similar problems and have similar minimal reimplementations of the basic fallback logic of the page allocator. There is another way of implementing a slab by avoiding per node lists (see modular slab) but this wont work within the existing slab. V1->V2: - Use NUMA_BUILD to avoid #ifdef CONFIG_NUMA - Exploit GFP_THISNODE being 0 in the NON_NUMA case to avoid another #ifdef [akpm@osdl.org: build fix] Signed-off-by:
-
Christoph Lameter authored
GFP_THISNODE must be set to 0 in the non numa case otherwise we disable retry and warnings for failing allocations in the SMP and UP case. Signed-off-by:
-
Christoph Lameter authored
The NUMA_BUILD constant is always available and will be set to 1 on NUMA_BUILDs. That way checks valid only under CONFIG_NUMA can easily be done without #ifdef CONFIG_NUMA F.e. if (NUMA_BUILD && <numa_condition>) { ... } [akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is causing ifdef explosion in core kernel, so let's see if this is a comfortable way in whcih to control that] Signed-off-by: -
Jes Sorensen authored
On larger systems, the amount of output dumped on the console when you do SysRq-M is beyond insane. This patch is trying to reduce it somewhat as even with the smaller NUMA systems that have hit the desktop this seems to be a fair thing to do. The philosophy I have taken is as follows: 1) If a zone is empty, don't tell, we don't need yet another line telling us so. The information is available since one can look up the fact how many zones were initialized in the first place. 2) Put as much information on a line is possible, if it can be done in one line, rahter than two, then do it in one. I tried to format the temperature stuff for easy reading. Change show_free_areas() to not print lines for empty zones. If no zone output is printed, the zone is empty. This reduces the number of lines dumped to the console in sysrq on a large system by several thousand lines. Change the zone temperature printouts to use one line per CPU instead of two lines (one hot, one cold). On a 1024 CPU, 1024 node system, this reduces the console output by over a million lines of output. While this is a bigger problem on large NUMA systems, it is also applicable to smaller desktop sized and mid range NUMA systems. Old format: Mem-info: Node 0 DMA per-cpu: cpu 0 hot: high 42, batch 7 used:24 cpu 0 cold: high 14, batch 3 used:1 cpu 1 hot: high 42, batch 7 used:34 cpu 1 cold: high 14, batch 3 used:0 cpu 2 hot: high 42, batch 7 used:0 cpu 2 cold: high 14, batch 3 used:0 cpu 3 hot: high 42, batch 7 used:0 cpu 3 cold: high 14, batch 3 used:0 cpu 4 hot: high 42, batch 7 used:0 cpu 4 cold: high 14, batch 3 used:0 cpu 5 hot: high 42, batch 7 used:0 cpu 5 cold: high 14, batch 3 used:0 cpu 6 hot: high 42, batch 7 used:0 cpu 6 cold: high 14, batch 3 used:0 cpu 7 hot: high 42, batch 7 used:0 cpu 7 cold: high 14, batch 3 used:0 Node 0 DMA32 per-cpu: empty Node 0 Normal per-cpu: empty Node 0 HighMem per-cpu: empty Node 1 DMA per-cpu: [snip] Free pages: 5410688kB (0kB HighMem) Active:9536 inactive:4261 dirty:6 writeback:0 unstable:0 free:338168 slab:1931 mapped:1900 pagetables:208 Node 0 DMA free:1676304kB min:3264kB low:4080kB high:4896kB active:128048kB inactive:61568kB present:1970880kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 DMA32 free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 Normal free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 HighMem free:0kB min:512kB low:512kB high:512kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 1 DMA free:1951728kB min:3280kB low:4096kB high:4912kB active:5632kB inactive:1504kB present:1982464kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 .... New format: Mem-info: Node 0 DMA per-cpu: CPU 0: Hot: hi: 42, btch: 7 usd: 41 Cold: hi: 14, btch: 3 usd: 2 CPU 1: Hot: hi: 42, btch: 7 usd: 40 Cold: hi: 14, btch: 3 usd: 1 CPU 2: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 CPU 3: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 CPU 4: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 CPU 5: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 CPU 6: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 CPU 7: Hot: hi: 42, btch: 7 usd: 0 Cold: hi: 14, btch: 3 usd: 0 Node 1 DMA per-cpu: [snip] Free pages: 5411088kB (0kB HighMem) Active:9558 inactive:4233 dirty:6 writeback:0 unstable:0 free:338193 slab:1942 mapped:1918 pagetables:208 Node 0 DMA free:1677648kB min:3264kB low:4080kB high:4896kB active:129296kB inactive:58864kB present:1970880kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 1 DMA free:1948448kB min:3280kB low:4096kB high:4912kB active:6864kB inactive:3536kB present:1982464kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Signed-off-by:Jes Sorensen <jes@sgi.com> Signed-off-by:
-
Christoph Lameter authored
kmalloc_node() falls back to ___cache_alloc() under certain conditions and at that point memory policies may be applied redirecting the allocation away from the current node. Therefore kmalloc_node(...,numa_node_id()) or kmalloc_node(...,-1) may not return memory from the local node. Fix this by doing the policy check in __cache_alloc() instead of ____cache_alloc(). This version here is a cleanup of Kiran's patch. - Tested on ia64. - Extra material removed. - Consolidate the exit path if alternate_node_alloc() returned an object. [akpm@osdl.org: warning fix] Signed-off-by:
Alok N Kataria <alok.kataria@calsoftinc.com> Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
-
Nick Piggin authored
Clean up the invalidate code, and use a common function to safely remove the page from pagecache. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Heiko Carstens authored
This moves the definition of struct page from mm.h to its own header file page-struct.h. This is a prereq to fix SetPageUptodate which is broken on s390: #define SetPageUptodate(_page) do { struct page *__page = (_page); if (!test_and_set_bit(PG_uptodate, &__page->flags)) page_test_and_clear_dirty(_page); } while (0) _page gets used twice in this macro which can cause subtle bugs. Using __page for the page_test_and_clear_dirty call doesn't work since it causes yet another problem with the page_test_and_clear_dirty macro as well. In order to avoid all these problems caused by macros it seems to be a good idea to get rid of them and convert them to static inline functions. Because of header file include order it's necessary to have a seperate header file for the struct page definition. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Andrew Morton authored
The VM is supposed to minimise the number of pages which get written off the LRU (for IO scheduling efficiency, and for high reclaim-success rates). But we don't actually have a clear way of showing how true this is. So add `nr_vmscan_write' to /proc/vmstat and /proc/zoneinfo - the number of pages which have been written by the vm scanner in this zone and globally. Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Mel Gorman authored
Arch-independent zone-sizing determines the size of a node (pgdat->node_spanned_pages) based on the physical memory that was registered by the architecture. However, when CONFIG_MEMORY_HOTPLUG_RESERVE is set, the architecture expects that the spanned_pages will be much larger and that mem_map will be allocated that is used lated on memory hot-add. This patch allows an architecture that sets CONFIG_MEMORY_HOTPLUG_RESERVE to call push_node_boundaries() which will set the node beginning and end to at *least* the requested boundary. Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
absent_pages_in_range() made the assumption that users of the API would not care about holes beyound the end of physical memory. This was not the case. This patch will account for ranges outside of physical memory as holes correctly. Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
The x86_64 code accounted for memmap and some portions of the the DMA zone as holes. This was because those areas would never be reclaimed and accounting for them as memory affects min watermarks. This patch will account for the memmap as a memory hole. Architectures may optionally use set_dma_reserve() if they wish to account for a portion of memory in ZONE_DMA as a hole. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
Size zones and holes in an architecture independent manner for ia64. [bob.picco@hp.com: fix ia64 FLATMEM+VIRTUAL_MEM_MAP] Signed-off-by:
Bob Picco <bob.picco@hp.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Mel Gorman authored
Size zones and holes in an architecture independent manner for x86_64. Signed-off-by:
-
Mel Gorman authored
Size zones and holes in an architecture independent manner for x86. [akpm@osdl.org: build fix] Signed-off-by:
-
Mel Gorman authored
Size zones and holes in an architecture independent manner for Power. [judith@osdl.org: build fix] Signed-off-by:
-
Mel Gorman authored
At a basic level, architectures define structures to record where active ranges of page frames are located. Once located, the code to calculate zone sizes and holes in each architecture is very similar. Some of this zone and hole sizing code is difficult to read for no good reason. This set of patches eliminates the similar-looking architecture-specific code. The patches introduce a mechanism where architectures register where the active ranges of page frames are with add_active_range(). When all areas have been discovered, free_area_init_nodes() is called to initialise the pgdat and zones. The zone sizes and holes are then calculated in an architecture independent manner. Patch 1 introduces the mechanism for registering and initialising PFN ranges Patch 2 changes ppc to use the mechanism - 139 arch-specific LOC removed Patch 3 changes x86 to use the mechanism - 136 arch-specific LOC removed Patch 4 changes x86_64 to use the mechanism - 74 arch-specific LOC removed Patch 5 changes ia64 to use the mechanism - 52 arch-specific LOC removed Patch 6 accounts for mem_map as a memory hole as the pages are not reclaimable. It adjusts the watermarks slightly Tony Luck has successfully tested for ia64 on Itanium with tiger_defconfig, gensparse_defconfig and defconfig. Bob Picco has also tested and debugged on IA64. Jack Steiner successfully boot tested on a mammoth SGI IA64-based machine. These were on patches against 2.6.17-rc1 and release 3 of these patches but there have been no ia64-changes since release 3. There are differences in the zone sizes for x86_64 as the arch-specific code for x86_64 accounts the kernel image and the starting mem_maps as memory holes but the architecture-independent code accounts the memory as present. The big benefit of this set of patches is a sizable reduction of architecture-specific code, some of which is very hairy. There should be a greater reduction when other architectures use the same mechanisms for zone and hole sizing but I lack the hardware to test on. Additional credit; Dave Hansen for the initial suggestion and comments on early patches Andy Whitcroft for reviewing early versions and catching numerous errors Tony Luck for testing and debugging on IA64 Bob Picco for fixing bugs related to pfn registration, reviewing a number of patch revisions, providing a number of suggestions on future direction and testing heavily Jack Steiner and Robin Holt for testing on IA64 and clarifying issues related to memory holes Yasunori for testing on IA64 Andi Kleen for reviewing and feeding back about x86_64 Christian Kujau for providing valuable information related to ACPI problems on x86_64 and testing potential fixes This patch: Define the structure to represent an active range of page frames within a node in an architecture independent manner. Architectures are expected to register active ranges of PFNs using add_active_range(nid, start_pfn, end_pfn) and call free_area_init_nodes() passing the PFNs of the end of each zone. Signed-off-by:
-
Andrew Morton authored
We need processor.h for cpu_relax(). Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Alexey Dobriyan authored
un-, de-, -free, -destroy, -exit, etc functions should in general return void. Also, There is very little, say, filesystem driver code can do upon failed kmem_cache_destroy(). If it will be decided to BUG in this case, BUG should be put in generic code, instead. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by:
-
Panagiotis Issaris authored
* Removing useless casts * Removing useless wrapper * Conversion from kmalloc+memset to kzalloc Signed-off-by:
Panagiotis Issaris <takis@issaris.org> Acked-by:
Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by:
-
Panagiotis Issaris authored
Conversions from kmalloc+memset to kzalloc. Signed-off-by:
-
Eric Sandeen authored
Some of the changes in balloc.c are just cosmetic, as Andreas pointed out - if they overflow they'll then underflow and things are fine. 5th hunk actually fixes an overflow problem. Also check for potential overflows in inode & block counts when resizing. Signed-off-by:
Eric Sandeen <esandeen@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Dave Kleikamp authored
Fixing up some endian-ness warnings in preparation to clone ext4 from ext3. Signed-off-by:
-
Dave Kleikamp authored
More white space cleanups in preparation of cloning ext4 from ext3. Removing spaces that precede a tab. Signed-off-by:
-
Vasily Averin authored
SWsoft Virtuozzo/OpenVZ Linux kernel team has discovered that ext3 error behavior was broken in linux kernels since 2.5.x versions by the following patch: 2002/10/31 02:15:26-05:00 tytso@snap.thunk.org Default mount options from superblock for ext2/3 filesystems http://linux.bkbits.net:8080/linux-2.6/gnupatch@3dc0d88eKbV9ivV4ptRNM8fBuA3JBQ In case ext3 file system is mounted with errors=continue (EXT3_ERRORS_CONTINUE) errors should be ignored when possible. However at present in case of any error kernel aborts journal and remounts filesystem to read-only. Such behavior was hit number of times and noted to differ from that of 2.4.x kernels. This patch fixes this: - do nothing in case of EXT3_ERRORS_CONTINUE, - set EXT3_MOUNT_ABORT and call journal_abort() in all other cases - panic() should be called after ext3_commit_super() to save sb marked as EXT3_ERROR_FS Signed-off-by:
Vasily Averin <vvs@sw.ru> Acked-by:
Kirill Korotaev <dev@sw.ru> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Mingming Cao authored
Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Mingming Cao authored
In the past there were a few kernel panics related to block reservation tree operations failure (insert/remove etc). It would be very useful to get the block allocation reservation map info when such error happens. Signed-off-by:
-
Eric Sandeen authored
These are a few places I've found in jbd that look like they may not be 16T-safe, or consistent with the use of unsigned longs for block containers. Problems here would be somewhat hard to hit, would require journal blocks past the 8T boundary, which would not be terribly common. Still, should fix. (some of these have come from the ext4 work on jbd as well). I think there's one more possibility that the wrap() function may not be safe IF your last block in the journal butts right up against the 232 block boundary, but that seems like a VERY remote possibility, and I'm not worrying about it at this point. Signed-off-by:
-
Eric Sandeen authored
This is primarily format string fixes, with changes to ialloc.c where large inode counts could overflow, and also pass around journal_inum as an unsigned long, just to be pedantic about it.... Signed-off-by:
-
Eric Sandeen authored
Signed-off-by:
-
Eric Sandeen authored
I need to do some actual IO testing now, but this gets things mounting for a 16T ext3 filesystem. (patched up e2fsprogs is needed too, I'll send that off the kernel list) This patch fixes these issues in the kernel: o sbi->s_groups_count overflows in ext3_fill_super() sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) - le32_to_cpu(es->s_first_data_block) + EXT3_BLOCKS_PER_GROUP(sb) - 1) / EXT3_BLOCKS_PER_GROUP(sb); at 16T, s_blocks_count is already maxed out; adding EXT3_BLOCKS_PER_GROUP(sb) overflows it and groups_count comes out to 0. Not really what we want, and causes a failed mount. Feel free to check my math (actually, please do!), but changing it this way should work & avoid the overflow: (A + B - 1)/B changed to: ((A - 1)/B) + 1 o ext3_check_descriptors() overflows range checks ext3_check_descriptors() iterates over all block groups making sure that various bits are within the right block ranges... on the last pass through, it is checking the error case [item] >= block + EXT3_BLOCKS_PER_GROUP(sb) where "block" is the first block in the last block group. The last block in this group (and the last one that will fit in 32 bits) is block + EXT3_BLOCKS_PER_GROUP(sb)- 1. block + EXT3_BLOCKS_PER_GROUP(sb) wraps back around to 0. so, make things clearer with "first_block" and "last_block" where those are first and last, inclusive, and use <, > rather than <, >=. Finally, the last block group may be smaller than the rest, so account for this on the last pass through: last_block = sb->s_blocks_count - 1; (a similar patch could be done for ext2; does anyone in their right mind use ext2 at 16T? I'll send an ext2 patch doing the same thing if that's warranted) Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Stephen Tweedie <sct@redhat.com> Signed-off-by:
-
Mingming Cao authored
Remove whitespace from ext3 and jbd, before we clone ext4. Signed-off-by: Mingming Cao<cmm@us.ibm.com> Signed-off-by:
-
Josh Triplett authored
jbd_sync_bh releases journal->j_list_lock. Add a lock annotation to this function so that sparse can check callers for lock pairing, and so that sparse will not complain about this function since it intentionally uses the lock in this manner. Signed-off-by:
Josh Triplett <josh@freedesktop.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Fix build error introduced by 3212fe15 Non-NUMA case should be handled. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (30 commits) i2c: Drop unimplemented slave functions i2c: Constify i2c_algorithm declarations, part 2 i2c: Constify i2c_algorithm declarations, part 1 i2c: Let drivers constify i2c_algorithm data i2c-isa: Restore driver owner i2c-viapro: Add support for the VT8237A and VT8251 i2c: Warn on i2c client creation failure i2c-core: Drop useless bitmaskings i2c-algo-pcf: Discard the mdelay data struct member i2c-algo-bit: Cleanups i2c-isa: Fail adding driver on attach_adapter error i2c: __must_check fixes (chip drivers) i2c-dev: attach/detach_adapter cleanups i2c-stub: Chip address as a module parameter i2c: Plan i2c-isa for removal i2c: New bus driver for TI OMAP boards i2c-algo-bit: Discard the mdelay data struct member i2c-matroxfb: Struct init conversion i2c: Fix copy-n-paste in subsystem Kconfig i2c-au1550: Add I2C support for Au1200 ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits) pciehp - fix wrong return value IA64: PCI: dont disable irq which is not enabled acpiphp: add support for ioapic hot-remove PCI: assign ioapic resource at hotplug acpiphp: disable bridges acpiphp: stop bus device before acpi_bus_trim PCI: add pci_stop_bus_device acpiphp: do not initialize existing ioapics acpiphp: initialize ioapics before starting devices acpiphp: set hpp values before starting devices PCI Hotplug: cleanup pcihp skeleton code. PCI: Restore PCI Express capability registers after PM event PCI: drivers/pci/hotplug/acpiphp_glue.c: make a function static PCI: Multiprobe sanitizer PCI: fix __must_check warnings PCI Hotplug: fix __must_check warnings SHPCHP: fix __must_check warnings PCI-Express AER implemetation: pcie_portdrv error handler PCI-Express AER implemetation: AER core and aerdriver PCI-Express AER implemetation: export pcie_port_bus_type ...
-
