- 19 Jan, 2023 40 commits
-
-
Ilpo Järvinen authored
Convert the raise/on parameter in ->dtr_rts() to bool through the callchain. The parameter is used like bool. In USB serial, there remains a few implicit bool -> larger type conversions because some devices use u8 in their control messages. In moxa_tiocmget(), dtr variable was reused for line status which requires int so use a separate variable for status. Reviewed-by:
Jiri Slaby <jirislaby@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-8-ilpo.jarvinen@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilpo Järvinen authored
Return boolean from ->carrier_raised() instead of 0 and 1. Make the return type change also to tty_port_carrier_raised() that makes the ->carrier_raised() call (+ cd variable in moxa into which its return value is stored). Also cleans up a few unnecessary constructs related to this change: return xx ? 1 : 0; -> return xx; if (xx) return 1; return 0; -> return xx; Reviewed-by:
-
Ilpo Järvinen authored
Convert init_hw parameter in uart_startup() and uart_port_startup() to bool as code treats them like bool. Reviewed-by:
-
Ilpo Järvinen authored
Return type of tty_port_initialized() is bool, use matching type for the local variable. Also reorder the local vars to reverse-xmas-tree while at it. Reviewed-by:
-
Ilpo Järvinen authored
Make callers pass true/false consistently for bool val. Reviewed-by:
-
Ilpo Järvinen authored
Make callers pass true/false consistently for bool val. Reviewed-by:
-
Ilpo Järvinen authored
Make callers pass true/false consistently for bool val. Reviewed-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Reviewed-by:
-
Yuan Can authored
As the devm_clk_get() may return ERR_PTR, its return value needs to be checked to avoid invalid poineter dereference. Signed-off-by:
Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221125093832.33386-1-yuancan@huawei.comSigned-off-by:
-
Christoph Niedermaier authored
If a RX_DURING_TX GPIO is defined by the DT property "rs485-rx-during-tx-gpios" this patch switches this GPIO accordingly to the RS485 flag RX_DURING_TX in user space. Controlled by this GPIO, now the hardware is responsible for connecting or disconnecting RX during TX. Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Link: https://lore.kernel.org/r/20221202104127.122761-4-cniedermaier@dh-electronics.comSigned-off-by:
-
Christoph Niedermaier authored
If a RX_DURING_TX GPIO is defined by the DT property "rs485-rx-during-tx-gpios" this patch switches this GPIO accordingly to the RS485 flag RX_DURING_TX in user space. In addition, the i.MX UART receiver is no longer turned on and off during sending, because now the hardware is responsible for connecting or disconnecting RX during TX controlled by this GPIO. Signed-off-by:
-
Christoph Niedermaier authored
This patch provides a generic GPIO variable for outputting the state of RS485 RX_DURING_TX. The GPIO is defined by the devicetree property "rs485-rx-during-tx-gpios". To use it in a low level serial driver, the evaluation of this variable must be implemented there accordingly. Signed-off-by:
-
Christoph Niedermaier authored
Add a binding for a generic definition of an output GPIO that sets the state of rs485-rx-during-tx. The idea is that the hardware already controls the option receiving during sending before it gets to the signal receiving hardware. The standard RS485 is a half-duplex bus that in most cases is driven by an UART controller. The advantage of using this GPIO is that it is independent of the capabilities of the UART core and the UART driver. On the hardware side the interface to the bus is controlled by a transceiver, that has a pin called RE (RX Enable) or similar, which connects the bus to the RX signal of the UART controller. The GPIO can switch between two states to control the RE pin via an electrical circuit: - Active: The RE pin is always active. The UART RX see everything on the bus and therefore also what happens with the TX signal on the bus. - Inactive: The RE pin is always active, but during sending on the bus the pin RE is inactive. So basically the receiving during sending is suppressed. A possible circuit diagram could look like this: ┌──────────────────┐ │ RS485 │ TX ───────────────┤D │ │ Transceiver │ RTS ────┬──────────┤DE │ │ │ │ │ ┌─────┐ │ │ └─┤& │ │ │ │ ├──┤!RE │ !rx_during_tx_gpio ──────┤ │ │ │ └─────┘ │ │ │ │ RX ───────────────┤R │ │ │ └──────────────────┘ Here the RTS pin of the UART core is used to control TX via the transceiver pin DE (Drive Enable). RE and rx_during_tx_gpio are active low. Signed-off-by:Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221202104127.122761-1-cniedermaier@dh-electronics.comSigned-off-by:
-
Yi Yang authored
Add the missing clk_disable_unprepare() before return from tegra_uart_hw_init() in the error handling path. When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk' has been enabled, fix it by adding clk_disable_unprepare(). Fixes: cc9ca4d9 ("serial: tegra: Only print FIFO error message when an error occurs") Fixes: d781ec21 ("serial: tegra: report clk rate errors") Signed-off-by:
Yi Yang <yiyang13@huawei.com> Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.comSigned-off-by:
-
Isaac True authored
The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. Co-developed-by:Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by:
Isaac True <isaac.true@canonical.com> Link: https://lore.kernel.org/r/20221130105529.698385-1-isaac.true@canonical.comSigned-off-by:
-
Krzysztof Kozlowski authored
msm_set_baud_rate() releases and re-acquires the port->lock, thus add lock annotation for Sparse static code checks. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230109152212.343476-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Christophe JAILLET authored
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code. This also avoids some other warnings/issues. (see [1]) [1]: https://lore.kernel.org/all/20221118233101.never.215-kees@kernel.org/Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/735a807c2df835aa436dcbc76b374f983f89a9af.1672419577.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Liang He authored
In ucc_uart_probe(), we have added proper of_node_put() in the failure paths. However, we miss it before we free *qe_port* in the remove() function. Signed-off-by:
Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20221205085437.1163682-1-windhl@126.comSigned-off-by:
-
Bartosz Golaszewski authored
The qcom-geni-serial driver currently only works in SE FIFO mode. This limits the UART speed to around 180 kB/s. In order to achieve higher speeds we need to use SE DMA mode. Keep the console port working in FIFO mode but extend the code to use DMA for the high-speed port. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20221229155030.418800-15-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
The following symbols will be used when adding support for SE DMA in the qcom geni serial driver. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20221229155030.418800-14-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
Instead of checking the device compatible in probe(), assign the device-specific data to struct of_device_id. We'll use it later when providing SE DMA support. Signed-off-by:
-
Bartosz Golaszewski authored
The return value of the handle_rx() callback is never checked. Drop it. Signed-off-by:
-
Bartosz Golaszewski authored
Shuffle the code a bit, drop unneeded variables, make types of others more consistent and use uart_xmit_advance() instead of handling tail->xmit manually. Signed-off-by:
-
Bartosz Golaszewski authored
qcom_geni_serial_handle_tx() is pretty big, let's move the code that handles the actual writing of data to a separate function which makes sense in preparation for introducing a dma variant of handle_tx(). Signed-off-by:
-
Bartosz Golaszewski authored
Remove redundant indentation in struct member assignment. Signed-off-by:
-
Bartosz Golaszewski authored
Simplify the conditions in qcom_geni_serial_isr() and fix indentation. Signed-off-by:
-
Bartosz Golaszewski authored
Remove stray newlines around #ifdefs for consistency with the rest of the driver code. Signed-off-by:
-
Bartosz Golaszewski authored
The member we want to resolve in struct qcom_geni_serial_port is called uport so we don't need an additional redundant parameter in this macro. While at it: turn the macro into a static inline function. Signed-off-by:
-
Bartosz Golaszewski authored
Keep the #define symbols aligned for better readability. Signed-off-by:
-
Bartosz Golaszewski authored
Drop all unused symbols from the driver. Signed-off-by:
-
Bartosz Golaszewski authored
If we shuffle the code a bit, we can drop all forward definitions of various static functions. Signed-off-by:
-
Bartosz Golaszewski authored
We don't stop transmissions in progress at shutdown. This is fine with FIFO SE mode but with DMA (support for which we'll introduce later) it causes trouble so fix it now. Fixes: e8376633 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown") Signed-off-by:
-
Jiri Slaby (SUSE) authored
It's used on few places, so make the code easier to follow by caching the subtraction result. Signed-off-by:
-
Jiri Slaby (SUSE) authored
Rename more variables (t, b, s, d) -> (top, bottom, src, dst) to make them more obvious. Signed-off-by:
-
Jiri Slaby (SUSE) authored
The algorithm used for scrolling is the array juggling. It has complexity O(N) and space complexity O(1). I.e. quite fast w/o requirements for temporary storage. Move the algorithm to a separate function so it is obvious what it is. It is almost generic (except the array type), so if anyone else wants array rotation, feel free to make it generic and move it to include/. And rename all the variables from i, j, k, sz, d, and so on to something saner. Signed-off-by:
-
Jiri Slaby (SUSE) authored
After previous patches, we can simply test vc->vc_uni_lines, so do so in many unicode functions. This makes the code more compact. And even use if (!) return; in vc_uniscr_scroll(), so that the whole code is indented on the left. Signed-off-by: -
Jiri Slaby (SUSE) authored
No need to panic in vc_uniscr_copy_line(), just warn. This should never happen though, as vc_uniscr_check() is supposed to be called before vc_uniscr_copy_line(). And the former checks vc->vc_uni_lines already. In any case, use _ONCE as vc_uniscr_copy_line() is called repeatedly for each line. So don't flood the logs, just in case. Signed-off-by:
-
Jiri Slaby (SUSE) authored
It contains only lines with pointers to characters (u32s). So use simple clear 'u32 **lines' all over the code. This avoids zero-length arrays. It also makes the allocation less error-prone (size of the struct wasn't taken into account at all). Signed-off-by:
-
Jiri Slaby (SUSE) authored
It boils down to uint32_t, so use u32 directly, instead. This makes the code more obvious. Signed-off-by:
-
Jiri Slaby (SUSE) authored
Instead of sizeof(type), use sizeof(*variable) which is preferred. We are going to remove the unicode's char32_t typedef, so this makes the switch easier. Signed-off-by:
-
Jiri Slaby (SUSE) authored
NO_VC_UNI_SCREEN is defined nowhere. Remove the last reference to it. Signed-off-by:
-
