If user updates any cpu's cpu_capacity, then the new value is going to
be applied to all its online sibling cpus. But this need not to be correct
always, as sibling cpus (in ARM, same micro architecture cpus) would have
different cpu_capacity with different performance characteristics.
So, updating the user supplied cpu_capacity to all cpu siblings
is not correct.

And another problem is, current code assumes that 'all cpus in a cluster
or with same package_id (core_siblings), would have same cpu_capacity'.
But with commit '5bdd2b3f ("arm64: topology: add support to remove
cpu topology sibling masks")', when a cpu hotplugged out, the cpu
information gets cleared in its sibling cpus. So, user supplied
cpu_capacity would be applied to only online sibling cpus at the time.
After that, if any cpu hotplugged in, it would have different cpu_capacity
than its siblings, which breaks the above assumption.

So, instead of mucking around the core sibling mask for user supplied
value, use device-tree to set cpu capacity. And make the cpu_capacity
node as read-only to know the asymmetry between cpus in the system.
While at it, remove cpu_scale_mutex usage, which used for sysfs write
protection.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Quentin Perret <quentin.perret@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Platforms may provide system memory where some physical address ranges
perform differently than others, or is cached by the system on the
memory side.

Add documentation describing a high level overview of such systems and the
perforamnce and caching attributes the kernel provides for applications
wishing to query this information.
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Register memory side cache attributes with the memory's node if HMAT
provides the side cache iniformation table.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Save the best performance access attributes and register these with the
memory's node if HMAT provides the locality table. While HMAT does make
it possible to know performance for all possible initiator-target
pairings, we export only the local pairings at this time.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the HMAT Subsystem Address Range provides a valid processor proximity
domain for a memory domain, or a processor domain matches the performance
access of the valid processor proximity domain, register the memory
target with that initiator so this relationship will be visible under
the node's sysfs directory.

Since HMAT requires valid address ranges have an equivalent SRAT entry,
verify each memory target satisfies this requirement.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

System memory may have caches to help improve access speed to frequently
requested address ranges. While the system provided cache is transparent
to the software accessing these memory ranges, applications can optimize
their own access based on cache attributes.

Provide a new API for the kernel to register these memory-side caches
under the memory node that provides it.

The new sysfs representation is modeled from the existing cpu cacheinfo
attributes, as seen from /sys/devices/system/cpu/<cpu>/cache/.  Unlike CPU
cacheinfo though, the node cache level is reported from the view of the
memory. A higher level number is nearer to the CPU, while lower levels
are closer to the last level memory.

The exported attributes are the cache size, the line size, associativity
indexing, and write back policy, and add the attributes for the system
memory caches to sysfs stable documentation.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Heterogeneous memory systems provide memory nodes with different latency
and bandwidth performance attributes. Provide a new kernel interface
for subsystems to register the attributes under the memory target
node's initiator access class. If the system provides this information,
applications may query these attributes when deciding which node to
request memory.

The following example shows the new sysfs hierarchy for a node exporting
performance attributes:

  # tree -P "read*|write*"/sys/devices/system/node/nodeY/accessZ/initiators/
  /sys/devices/system/node/nodeY/accessZ/initiators/
  |-- read_bandwidth
  |-- read_latency
  |-- write_bandwidth
  `-- write_latency

The bandwidth is exported as MB/s and latency is reported in
nanoseconds. The values are taken from the platform as reported by the
manufacturer.

Memory accesses from an initiator node that is not one of the memory's
access "Z" initiator nodes linked in the same directory may observe
different performance than reported here. When a subsystem makes use
of this interface, initiators of a different access number may not have
the same performance relative to initiators in other access numbers, or
omitted from the any access class' initiators.

Descriptions for memory access initiator performance access attributes
are added to sysfs stable documentation.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Systems may be constructed with various specialized nodes. Some nodes
may provide memory, some provide compute devices that access and use
that memory, and others may provide both. Nodes that provide memory are
referred to as memory targets, and nodes that can initiate memory access
are referred to as memory initiators.

Memory targets will often have varying access characteristics from
different initiators, and platforms may have ways to express those
relationships. In preparation for these systems, provide interfaces for
the kernel to export the memory relationship among different nodes memory
targets and their initiators with symlinks to each other.

If a system provides access locality for each initiator-target pair, nodes
may be grouped into ranked access classes relative to other nodes. The
new interface allows a subsystem to register relationships of varying
classes if available and desired to be exported.

A memory initiator may have multiple memory targets in the same access
class. The target memory's initiators in a given class indicate the
nodes access characteristics share the same performance relative to other
linked initiator nodes. Each target within an initiator's access class,
though, do not necessarily perform the same as each other.

A memory target node may have multiple memory initiators. All linked
initiators in a target's class have the same access characteristics to
that target.

The following example show the nodes' new sysfs hierarchy for a memory
target node 'Y' with access class 0 from initiator node 'X':

  # symlinks -v /sys/devices/system/node/nodeX/access0/
  relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY

  # symlinks -v /sys/devices/system/node/nodeY/access0/
  relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX

The new attributes are added to the sysfs stable documentation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Systems may provide different memory types and export this information
in the ACPI Heterogeneous Memory Attribute Table (HMAT). Parse these
tables provided by the platform and report the memory access and caching
attributes to the kernel messages.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Heterogeneous Memory Attribute Table (HMAT) header has different
field lengths than the existing parsing uses. Add the HMAT type to the
parsing rules so it may be generically parsed.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Parsing entries in an ACPI table had assumed a generic header
structure. There is no standard ACPI header, though, so less common
layouts with different field sizes required custom parsers to go through
their subtable entry list.

Create the infrastructure for adding different table types so parsing
the entries array may be more reused for all ACPI system tables and
the common code doesn't need to be duplicated.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

syzbot is hitting use-after-free bug in uinput module [1]. This is because
kobject_uevent(KOBJ_REMOVE) is called again due to commit 0f4dafc0
("Kobject: auto-cleanup on final unref") after memory allocation fault
injection made kobject_uevent(KOBJ_REMOVE) from device_del() from
input_unregister_device() fail, while uinput_destroy_device() is expecting
that kobject_uevent(KOBJ_REMOVE) is not called after device_del() from
input_unregister_device() completed.

That commit intended to catch cases where nobody even attempted to send
"remove" uevents. But there is no guarantee that an event will ultimately
be sent. We are at the point of no return as far as the rest of the kernel
is concerned; there are no repeats or do-overs.

Also, it is not clear whether some subsystem depends on that commit.
If no subsystem depends on that commit, it will be better to remove
the state_{add,remove}_uevent_sent logic. But we don't want to risk
a regression (in a patch which will be backported) by trying to remove
that logic. Therefore, as a first step, let's avoid the use-after-free bug
by making sure that kobject_uevent(KOBJ_REMOVE) won't be triggered twice.

[1] https://syzkaller.appspot.com/bug?id=8b17c134fe938bbddd75a45afaa9e68af43a362dReported-by: syzbot <syzbot+f648cfb7e0b52bf7ae32@syzkaller.appspotmail.com>
Analyzed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 0f4dafc0 ("Kobject: auto-cleanup on final unref")
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 7934779a ("Driver-Core: disable /sbin/hotplug by
default"), the help text for the /sbin/hotplug fork-bomb says
"This should not be used today [...] creates a high system load, or
[...] out-of-memory situations during bootup".  The rationale for this
was that no recent mainstream system used this anymore (in 2010!).

A few years later, the complete uevent helper support was made optional
in commit 86d56134 ("kobject: Make support for uevent_helper
optional.").  However, if was still left enabled by default, to support
ancient userland.

Time passed by, and nothing should use this anymore, so it can be
disabled by default.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct device is big, around 760 bytes on x86_64.  It's not a critical
structure, but it is embedded everywhere, so making it smaller is always
a good thing.

With a recent patch that moved a field from struct device to the private
structure, some benchmarks showed a very odd regression, despite this
structure having nothing to do with those benchmarks.  That caused me to
look into the layout of the structure.  Using 'pahole', it showed a
number of holes and ways that the structure could be reordered in order
to align some cachelines better, as well as reduce the size of the
overall structure.

Move 'struct kobj' to the start of the structure, to keep that access
in the first cacheline, and try to organize things a bit more compactly
where possible

By doing these few moves, the result removes at least 8 bytes from
'struct device' on a 64bit system.  Given we know there are systems with
at least 30k devices in memory at once, every little byte counts, and
this change could be a savings of 240k of kernel memory for them.  On
"normal" systems the overall memory savings would be much less.

Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull KVM fixes from Paolo Bonzini:
 "A collection of x86 and ARM bugfixes, and some improvements to
  documentation.

  On top of this, a cleanup of kvm_para.h headers, which were exported
  by some architectures even though they not support KVM at all. This is
  responsible for all the Kbuild changes in the diffstat"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
  KVM: doc: Document the life cycle of a VM and its resources
  KVM: selftests: complete IO before migrating guest state
  KVM: selftests: disable stack protector for all KVM tests
  KVM: selftests: explicitly disable PIE for tests
  KVM: selftests: assert on exit reason in CR4/cpuid sync test
  KVM: x86: update %rip after emulating IO
  x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
  kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
  KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
  kvm: don't redefine flags as something else
  kvm: mmu: Used range based flushing in slot_handle_level_range
  KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
  KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
  kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
  KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
  KVM: Reject device ioctls from processes other than the VM's creator
  KVM: doc: Fix incorrect word ordering regarding supported use of APIs
  KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
  KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
  ...

Pull x86 fixes from Thomas Gleixner:
 "A pile of x86 updates:

   - Prevent exceeding he valid physical address space in the /dev/mem
     limit checks.

   - Move all header content inside the header guard to prevent compile
     failures.

   - Fix the bogus __percpu annotation in this_cpu_has() which makes
     sparse very noisy.

   - Disable switch jump tables completely when retpolines are enabled.

   - Prevent leaking the trampoline address"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/realmode: Make set_real_mode_mem() static inline
  x86/cpufeature: Fix __percpu annotation in this_cpu_has()
  x86/mm: Don't exceed the valid physical address space
  x86/retpolines: Disable switch jump tables when retpolines are enabled
  x86/realmode: Don't leak the trampoline kernel address
  x86/boot: Fix incorrect ifdeffery scope
  x86/resctrl: Remove unused variable

Pull perf tooling fixes from Thomas Gleixner:
 "Core libraries:
   - Fix max perf_event_attr.precise_ip detection.
   - Fix parser error for uncore event alias
   - Fixup ordering of kernel maps after obtaining the main kernel map
     address.

  Intel PT:
   - Fix TSC slip where A TSC packet can slip past MTC packets so that
     the timestamp appears to go backwards.
   - Fixes for exported-sql-viewer GUI conversion to python3.

  ARM coresight:
   - Fix the build by adding a missing case value for enumeration value
     introduced in newer library, that now is the required one.

  tool headers:
   - Syncronize kernel headers with the kernel, getting new io_uring and
     pidfd_send_signal syscalls so that 'perf trace' can handle them"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf pmu: Fix parser error for uncore event alias
  perf scripts python: exported-sql-viewer.py: Fix python3 support
  perf scripts python: exported-sql-viewer.py: Fix never-ending loop
  perf machine: Update kernel map address and re-order properly
  tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
  tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
  tools headers uapi: Update drm/i915_drm.h
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
  tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
  perf evsel: Fix max perf_event_attr.precise_ip detection
  perf intel-pt: Fix TSC slip
  perf cs-etm: Add missing case value

Pull CPU hotplug fixes from Thomas Gleixner:
 "Two SMT/hotplug related fixes:

   - Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
     aborts. This is triggered with the 'nosmt' command line option, but
     can happen by any abort condition. As the real unplug code is not
     compiled in, prevent the fail by keeping the CPU in zombie state.

   - Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
     completely. With 'nosmt' being a popular option it's required to
     unplug the half brought up sibling CPUs (due to the MCE wreckage)
     completely"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
  cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n

Pull locking fixlet from Thomas Gleixner:
 "Trivial update to the maintainers file"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Remove deleted file from futex file pattern

Pull core fixes from Thomas Gleixner:
 "A small set of core updates:

   - Make the watchdog respect the selected CPU mask again. That was
     broken by the rework of the watchdog thread management and caused
     inconsistent state and NMI watchdog being unstoppable.

   - Ensure that the objtool build can find the libelf location.

   - Remove dead kcore stub code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog: Respect watchdog cpumask on CPU hotplug
  objtool: Query pkg-config for libelf location
  proc/kcore: Remove unused kclist_add_remap()

Pull powerpc fixes from Michael Ellerman:
 "Three non-regression fixes.

   - Our optimised memcmp could read past the end of one of the buffers
     and potentially trigger a page fault leading to an oops.

   - Some of our code to read energy management data on PowerVM had an
     endian bug leading to bogus results.

   - When reporting a machine check exception we incorrectly reported
     TLB multihits as D-Cache multhits due to a missing entry in the
     array of causes.

  Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
  Segher Boessenkool, Vaidyanathan Srinivasan"

* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/mce: Fix misleading print for TLB mutlihit
  powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
  powerpc/64: Fix memcmp reading past the end of src/dest

Pull dmaengine fixes from Vinod Koul:

 - Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that
   caused regression

 - Fix MAINTAINER file uniphier-mdmac.c file path

* tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma:
  MAINTAINERS: Fix uniphier-mdmac.c file path
  dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"

Merge tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:

 - fix refcnt leak on interface rename

 - use memcpy in device_name_store() to avoid including garbage from a
   previous, longer value in the device_name

 - fix a potential NULL pointer dereference in case of_match_device()
   cannot find a match

* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: trigger: netdev: use memcpy in device_name_store
  leds: pca9532: fix a potential NULL pointer dereference
  leds: trigger: netdev: fix refcnt leak on interface rename

Pull GPIO fixes from Linus Walleij:
 "As you can see [in the git history] I was away on leave and Bartosz
  kindly stepped in and collected a slew of fixes, I pulled them into my
  tree in two sets and merged some two more fixes (fixing my own caused
  bugs) on top.

  Summary:

   - Revert the extended use of gpio_set_config() and think about how we
     can do this properly.

   - Fix up the SPI CS GPIO handling so it now works properly on the SPI
     bus children, as intended.

   - Error paths and driver fixes"

* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mockup: use simple_read_from_buffer() in debugfs read callback
  gpio: of: Fix of_gpiochip_add() error path
  gpio: of: Check for "spi-cs-high" in child instead of parent node
  gpio: of: Check propname before applying "cs-gpios" quirks
  gpio: mockup: fix debugfs read
  Revert "gpio: use new gpio_set_config() helper in more places"
  gpio: aspeed: fix a potential NULL pointer dereference
  gpio: amd-fch: Fix bogus SPDX identifier
  gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
  gpio: exar: add a check for the return value of ida_simple_get fails

If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example

# cat device_name

# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32

I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.

This is also preparation for future patches.

Fixes: 06f502f5 ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.

Fixes: fa4191a6 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.1-rc3, and one driver
  removal.

  The biggest thing here is the removal of the mt7621-eth driver as a
  "real" network driver was merged in 5.1-rc1 for this hardware, so this
  old driver can now be removed.

  Other than that, there are just a number of small fixes, all resolving
  reported issues and some potential corner cases for error handling
  paths.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vt6655: Remove vif check from vnt_interrupt
  staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
  staging: octeon-ethernet: fix incorrect PHY mode
  staging: vc04_services: Fix an error code in vchiq_probe()
  staging: erofs: fix error handling when failed to read compresssed data
  staging: vt6655: Fix interrupt race condition on device start up.
  staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
  staging: rtl8712: uninitialized memory in read_bbreg_hdl()
  staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
  staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
  staging, mt7621-pci: fix build without pci support
  staging: speakup_soft: Fix alternate speech with other synths
  staging: axis-fifo: add CONFIG_OF dependency
  staging: olpc_dcon_xo_1: add missing 'const' qualifier
  staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
  staging: erofs: fix to handle error path of erofs_vmap()
  staging: mt7621-dts: update ethernet settings.
  staging: remove mt7621-eth

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 5.1-rc3.

  Nothing major here, just a number of potential problems fixes for
  error handling paths, as well as some other minor bugfixes for
  reported issues with 5.1-rc1.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix NULL pointer issue when tty_port ops is not set
  Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
  dt-bindings: serial: Add compatible for Mediatek MT8183
  tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
  tty/serial: atmel: Add is_half_duplex helper
  serial: sh-sci: Fix setting SCSCR_TIE while transferring data
  serial: ar933x_uart: Fix build failure with disabled console
  tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
  sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
  tty: mxs-auart: fix a potential NULL pointer dereference
  tty: atmel_serial: fix a potential NULL pointer dereference
  serial: max310x: Fix to avoid potential NULL pointer dereference
  serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.1-rc3.

  Nothing major at all here, just a small collection of fixes for
  reported issues, and potential problems with error handling paths.
  Also a few new device ids, as normal.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Olicard 600
  USB: serial: cp210x: add new device id
  usb: u132-hcd: fix resource leak
  usb: cdc-acm: fix race during wakeup blocking TX traffic
  usb: mtu3: fix EXTCON dependency
  usb: usb251xb: fix to avoid potential NULL pointer dereference
  usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
  phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
  xhci: Don't let USB3 ports stuck in polling state prevent suspend
  usb: xhci: dbc: Don't free all memory with spinlock held
  xhci: Fix port resume done detection for SS ports with LPM enabled
  USB: serial: mos7720: fix mos_parport refcount imbalance on error path
  USB: gadget: f_hid: fix deadlock in f_hidg_write()
  usb: gadget: net2272: Fix net2272_dequeue()
  usb: gadget: net2280: Fix net2280_dequeue()
  usb: gadget: net2280: Fix overrun of OUT messages
  usb: dwc3: pci: add support for Comet Lake PCH ID
  usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
  usb: common: Consider only available nodes for dr_mode
  usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
  ...

Pull ACPI fix from Rafael Wysocki:
 "This corrects a previous attempt to make Linux use its own set of ACPI
  debug flags different from the upstream ACPICA's default (Erik
  Schmauss)"

* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: use different default debug value than ACPICA

Pull power management fixes from Rafael Wysocki:
 "These fix CPU base frequency reporting in the intel_pstate driver and
  a use-after-free in the scpi-cpufreq driver.

  Specifics:

   - Fix the ACPI CPPC library to actually follow the specification when
     decoding the guaranteed performance register information and make
     the intel_pstate driver to fall back to the nominal frequency when
     reporting the base frequency if the guaranteed performance register
     information is not there (Srinivas Pandruvada).

   - Fix use-after-free in the exit callback of the scpi-cpufreq left
     after an update during the 5.0 development cycle (Vincent Stehlé)"

* tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: scpi: Fix use after free
  cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency
  ACPI / CPPC: Fix guaranteed performance handling

Pull security layer fixes from James Morris:
 "Yama and LSM config fixes"

* 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
  Yama: mark local symbols as static

Merge misc fixes from Andrew Morton:
 "22 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
  fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
  fs: fs_parser: fix printk format warning
  checkpatch: add %pt as a valid vsprintf extension
  mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
  drivers/block/zram/zram_drv.c: fix idle/writeback string compare
  mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
  mm/memory_hotplug.c: fix notification in offline error path
  ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
  fs/proc/kcore.c: make kcore_modules static
  include/linux/list.h: fix list_is_first() kernel-doc
  mm/debug.c: fix __dump_page when mapping->host is not set
  mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
  include/linux/hugetlb.h: convert to use vm_fault_t
  iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
  mm: add support for kmem caches in DMA32 zone
  ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
  mm/hotplug: fix offline undo_isolate_page_range()
  fs/open.c: allow opening only regular files during execve()
  mailmap: add Changbin Du
  mm/debug.c: add a cast to u64 for atomic64_read()
  ...

Pull arm64 fix from Catalin Marinas:
 "Use memblock_alloc() instead of memblock_alloc_low() in
  request_standard_resources(), the latter being limited to the low 4G
  memory range on arm64"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: replace memblock_alloc_low with memblock_alloc

Pull IOMMU fixes from Joerg Roedel:

 - Fix a bug in the AMD IOMMU driver not handling exclusion ranges
   correctly. In fact the driver did not reserve these ranges for IOVA
   allocations, so that dma-handles could be allocated in an exclusion
   range, leading to data corruption. Exclusion ranges have not been
   used by any firmware up to now, so this issue remained undiscovered
   for quite some time.

 - Fix wrong warning messages that the IOMMU core code prints when it
   tries to allocate the default domain for an iommu group and the
   driver does not support any of the default domain types (like Intel
   VT-d).

* tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Reserve exclusion range in iova-domain
  iommu: Don't print warning when IOMMU driver only supports unmanaged domains

Pull driver core fix from Greg KH:
 "Here is a single driver core patch for 5.1-rc3.

  After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so
  we can now drop this macro from include/linux/device.h so that no more
  new users will be created.

  This patch has been in linux-next for a while, with no reported
  issues"

* tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: remove BUS_ATTR()

Pull char/misc driver fixes from Greg KH:
 "Here are some binder, habanalabs, and vboxguest driver fixes for
  5.1-rc3.

  The Binder fixes resolve some reported issues found by testing, first
  by the selinux developers, and then earlier today by syzbot.

  The habanalabs fixes are all minor, resolving a number of tiny things.

  The vboxguest patches are a bit larger. They resolve the fact that
  virtual box decided to change their api in their latest release in a
  way that broke the existing kernel code, despite saying that they were
  never going to do that. So this is a bit of a "new feature", but is
  good to get merged so that 5.1 will work with the latest release. The
  changes are not large and of course virtual box "swears" they will not
  break this again, but no one is holding their breath here.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x
  binder: fix race between munmap() and direct reclaim
  binder: fix BUG_ON found by selinux-testsuite
  habanalabs: cast to expected type
  habanalabs: prevent host crash during suspend/resume
  habanalabs: perform accounting for active CS
  habanalabs: fix mapping with page size bigger than 4KB
  habanalabs: complete user context cleanup before hard reset
  habanalabs: fix bug when mapping very large memory area
  habanalabs: fix MMU number of pages calculation

Pull SCSI fixes from James Bottomley:
 "Thirteen fixes, seven of which are for IBM fibre channel and three
  additional for fairly serious bugs in drivers (qla2xxx, mpt3sas,
  aacraid).

  Of the three core fixes, the most significant is probably the missed
  run queue causing an indefinite hang. The others are fixing a
  potential use after free on device close and silencing an incorrect
  warning"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvfc: Clean up transport events
  scsi: ibmvfc: Byte swap status and error codes when logging
  scsi: ibmvfc: Add failed PRLI to cmd_status lookup array
  scsi: ibmvfc: Remove "failed" from logged errors
  scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN
  scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
  scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
  scsi: sd: Quiesce warning if device does not report optimal I/O size
  scsi: sd: Fix a race between closing an sd device and sd I/O
  scsi: core: Run queue when state is set to running after being blocked
  scsi: qla4xxx: fix a potential NULL pointer dereference
  scsi: aacraid: Insure we don't access PCIe space during AER/EEH
  scsi: mpt3sas: Fix kernel panic during expander reset

Pull i2c fixes from Wolfram Sang:
 "A new ID for the i801 driver and some Documentation fixes to make it
  easier for people to find the bindings (which is also a basis for
  further improvements in that area)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: wmt: make bindings file name match the driver
  i2c: sun6i-p2wi: make bindings file name match the driver
  i2c: stu300: make bindings file name match the driver
  i2c: mt65xx: make bindings file name match the driver
  i2c: iop3xx: make bindings file name match the driver
  i2c: i801: Add support for Intel Comet Lake