- 10 Dec, 2006 40 commits
-
-
Mauro Carvalho Chehab authored
This fixes a bug introduced by the -git commit: bbf7871e It seems that some bttv apps can't work fine when audioset=0. Thanks to Christian Casteyde <casteyde.christian@free.fr> for pointing this. Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Jose Carlos Garcia Sogo authored
Add alternative device ID (0xb808) for AverMedia AverTV Volar dongles. Signed-off-by:
Jose Carlos Garcia Sogo <jsogo@debian.org> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Stefan Traby authored
Added support for Nova-T Stick with USB-pid: 0x7060 Signed-off-by:
Stefan Traby <stefan@hello-penguin.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Paolo Ciarrocchi authored
Acked-by:
Daniele Vallini <vallinidaniele@libero.it> Signed-off-by:
Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Thanks to input from Steven Toth from Hauppauge the tveeprom module has been extended to detect the presence of an IR transmitter (aka IR-blaster). Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Thomas Genty authored
This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid Signed-off-by:
Thomas Genty <tomlohave@gmail.com> Signed-off-by:
-
Michael Krufky authored
This patch adds support for the new, STK7700-based revision of the Leadtek Winfast DTV Dongle. Signed-off-by:
Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by:
-
Jonathan Corbet authored
This patch adds a V4L2 driver for the OmniVision OV7670 camera. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Jonathan Corbet authored
A driver for the Marvell M88ALP01 "CAFE" CMOS integrated camera controller. This driver has been renamed "cafe_ccic" since my previous patch set. Signed-off-by:
-
Jonathan Corbet authored
Two defines for V4L2, needed by the Cafe camera driver: 1) Add the RGB444 image format 2) Add the "init" internal command which is separate from "reset". Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Hartmut Hackmann authored
This board has the same PCI ID as the T200, so the exact board type is determined from the eeprom. The original patch was provided by Francis Barber <fedora@barber-family.id.au> Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
In case the exact board type needs to be determined by probing or evaluating the eeprom, this flag allows to still set the board type via the card=xx insmod option. This is an extract of a patch by Francis Barber. Signed-off-by:
-
Trent Piepho authored
Update the SNR calculations to use the new dvb_math log function, and add SNR calculations for all supported modulations for both lg dt3302 and dt3303. The QAM equations don't appear in the dt3302 datasheet, so the ones from the dt3303 datasheet were used. SNR returned is the actual value in dB as 8.8 fixed point. Reporting of real signal strength isn't supported, so rather than return 0, which confuses some software and users, a re-scaled SNR value is returned. Code originally by Rusty Scott. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Rusty Scott <rustys@ieee.org> Signed-off-by:
-
Christoph Haubrich authored
Copied routines for uc blocks and BER from the removed tda80xx.c into tda8083.c. Signed-off-by:
Christoph Haubrich <christoph1.haubrich@arcor.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Patrick Boettcher authored
Forgot to increase the device count for the STK7700P-devices Signed-off-by:
-
Henning Schroeer authored
Adding USB IDs for Uniwill STK7700P-ref-design Signed-off-by:
Henning Schroeer <post@henning-schroeder.de> Signed-off-by:
-
Tomi Koivulahti authored
This patch adds Compro Videomate U500 to supported devices. Signed-off-by:
Tomi Koivulahti <birchbay@gmail.com> Signed-off-by:
-
Patrick Boettcher authored
This patch contains several fixes for the autosearch algorithm and other small ones. Signed-off-by:
-
Patrick Boettcher authored
This patch contains support for the DiB7000PC-driver. Signed-off-by:
Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by:
Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by:
-
Hartmut Hackmann authored
This card has no firmware eeprom. The old version still should not need a firmware file due to an undocumented feature of the TDA10046. The patch also includes Hermann Pitton's proposal for improved antenna switch handling Signed-off-by:
-
Hermann Pitton authored
The gate control was moved to a separate function. Signed-off-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Hartmut Hackmann authored
The remote control works, but we still need a better keymap. Signed-off-by:
-
Patrick Boettcher authored
First working version of the dib7000m-driver. This commit also makes the Hauppauge NOVA-T Stick working. Signed-off-by:
-
Luke Deller authored
Add support for more keys on the remote control included with the DigitalNow tinyUSB2 DVB-T Receiver. Signed-off-by:
Luke Deller <luke@deller.id.au> Signed-off-by:
-
Mike Isely authored
Unlike 29xxx devices, the 24xxx model series does not have a dedicated I2C device for reception of IR codes. Instead IR is handled directly by the FX2 microcontroller and the results are communicated via commands to the FX2. Rather than implement a whole new IR reception pathway for 24xxx devices, this changeset instead emulates the presence of the 29xxx device's I2C based IR receiver by intercepting commands to that chip and issuing appropriate FX2 commands to do the needed action. This has the result of allowing all the usual IR frameworks (ir-kbd-i2c or lirc) to continue working unmodified for 24xxx devices. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Amit Choudhary authored
Signed-off-by:
Amit Choudhary <amit2030@gmail.com> Signed-off-by:
-
Michael Krufky authored
For the ASUS PVR-416, the external adc must be used for the rca audio inputs, but television / radio inputs use the internal adc. Thanks to Alex Deucher for lending his card to me. Signed-off-by:
-
Michael Krufky authored
For the KWorld HardwareMpegTV XPert, the external adc must be used for svideo / composite inputs, but television / radio inputs use the internal adc. Signed-off-by:
-
Michael Krufky authored
Some cx88-blackbird boards use an external adc, but not necessarily for all inputs. Thus, this needs to be configurable on the card level for each input. This patch allows for the usage of the external adc to be determined by a bit setting in the cx88_input struct for cards based on the cx88 blackbird design. Signed-off-by:
-
Michael Krufky authored
- fixed whitespace, replaced leading spaces with tabs - moved .mpeg descriptor below input settings Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
cxusb_lgdt3303_tuner_attach were renamed to cxusb_lgh064f_tuner_attach Signed-off-by:
-
Patrick Boettcher authored
While converting everything to DVB-USB-Adapter, there was a wrong indention. Signed-off-by:
-
Steven Toth authored
If the last cx88 board probed is not backbird based, and a previous board was, the entire module is unloaded leading to an oops during mpeg_open on the first /dev/videoN device. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Mikhail Fedotov authored
This is just an additional analog board configuration. Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru> Signed-off-by:
-
Hartmut Hackmann authored
The driver supports analog TV, radio and DVB-T. It is based on the preliminary patch by Pierluigi Rolando. Signed-off-by:
-
Steven Toth authored
A bug in cx8802_get_driver() meant that in multiboard environments, when testing frontends on the non primary board, the incorrect device was returned resulting in "Unsupported value in .mpeg.." messages. Depending on the electrical design of the hardware (serial, parallel, rising/falling edge detect), transport would still be delivered and the problem went unnoticed. This patch ensures the correct instance of cx8802_dev is returned. Signed-off-by:
-
Steven Toth authored
A series of patches to change the cx88 framework to allow the PCI mpeg port to be shared dynamically between different types of drivers or applications. This patch changes the cx88-dvb and cx88-blackbird drivers to become 'sub drivers' of a higher single cx88-mpeg driver. The cx88-mpeg driver is a superset of the previous cx88-mpeg/blackbird drivers and now owns the IRQ. cx88-dvb/blackbird now become mini drivers, registering themselves with cx88-mpeg through a standard interface with callbacks. Sub drivers request access to hardware via the cx88-mpeg driver. In turn the cx88-mpeg driver determines whether the hardware is busy and accepts or refuses the request, grant access using callbacks into the sub drivers. The net effect is that you are no longer able to tamper with the mpeg port from multiple different applications at the same time, potentially breaking a live mpeg2 hardware encoding or dvb stream. The mechanism extends to enable multiple dvb frontends to be registered and share the single resource. Signed-off-by:
-
Patrick Boettcher authored
Initial commit for the driver for the DiB7000M COFDM demodulator. Signed-off-by:
-
