- 01 Jul, 2009 40 commits
-
-
Arnaldo Carvalho de Melo authored
The copy we were using came from another copy I did for the dwarves (pahole) package, that came from the kernel years ago. The only function that is used by the perf tools and that isn't in the kernel is list_del_range, that I'm leaving in the perf tools only for now. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090701174608.GA5823@ghostprotocols.net> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Arnaldo Carvalho de Melo authored
The tools/perf/util/rbtree.c copy already drifted by three csets: 4b324126 4c601178 16c047ad So remove the copy and use the lib/rbtree.c directly, sharing the source code while still generating a separate object file, since tools/perf uses a far more agressive -O6 switch. Signed-off-by:
-
Jaswinder Singh Rajput authored
After: $ ./perf list List of pre-defined events (to be used in -e): cpu-cycles OR cycles [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults OR faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] L1-d$-loads [Hardware cache event] L1-d$-load-misses [Hardware cache event] L1-d$-stores [Hardware cache event] L1-d$-store-misses [Hardware cache event] L1-d$-prefetches [Hardware cache event] L1-d$-prefetch-misses [Hardware cache event] L1-i$-loads [Hardware cache event] L1-i$-load-misses [Hardware cache event] L1-i$-prefetches [Hardware cache event] L1-i$-prefetch-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-stores [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-prefetches [Hardware cache event] LLC-prefetch-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-stores [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-prefetches [Hardware cache event] dTLB-prefetch-misses [Hardware cache event] iTLB-loads [Hardware cache event] iTLB-load-misses [Hardware cache event] branch-loads [Hardware cache event] branch-load-misses [Hardware cache event] rNNN [raw hardware event descriptor] Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1246453578.3072.1.camel@ht.satnam> Signed-off-by:
-
Jaswinder Singh Rajput authored
MATCH_EVENT is useful: 1. for multiple attrs checking 2. avoid repetition of PERF_TYPE_ and PERF_COUNT_ and save space 3. avoids line breakage Signed-off-by:
-
Ingo Molnar authored
Enable -Wextra. This found a few real bugs plus a number of signed/unsigned type mismatches/uncleanlinesses. It also required a few annotations All things considered it was still worth it so lets try with this enabled for now. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Fix: builtin-report.c: In function ‘hist_entry__add’: builtin-report.c:1015: error: case label not within a switch statement builtin-report.c:1017: error: break statement not within loop or switch Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Paul Mackerras authored
This reworks the parser for event descriptors to make it more consistent in what it accepts. It is now structured as a recursive descent parser for the following grammar: events ::= event ( ("," | space) space* event )* event ::= ( raw_event | numeric_event | symbolic_event | generic_hw_event ) [ event_modifier ] raw_event ::= "r" hex_number numeric_event ::= number ":" number number ::= decimal_number | "0x" hex_number | "0" octal_number symbolic_event ::= string_from_event_symbols_array generic_hw_event::= cache_type ( "-" ( cache_op | cache_result ) )* event_modifier ::= ":" ( "u" | "k" | "h" )+ with the extra restriction that you can have at most one cache_op and at most one cache_result. We pass the current string pointer by reference (i.e. as a const char **) to the various parsing functions so that they can advance the pointer to indicate how much they consumed. They return 0 if they didn't recognize the thing at the pointer or 1 if they did (and advance the pointer past it). This also fixes parse_aliases to take the longest matching alias from the table, not the first one. Otherwise "l1-data" would match the "l1-d" alias and the "ata" would not be consumed. This allows event modifiers indicating what processor modes to count in to be applied to any event, not just numeric events, and adds a ":h" modifier to indicate counting in hypervisor mode. Specifying ":u" now sets both exclude_kernel and exclude_hv, and so on. Multiple modes can be specified, e.g. ":uk" will count in user or hypervisor mode (i.e. only exclude_kernel will be set). Signed-off-by:Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <19018.53826.843815.189847@cargo.ozlabs.ibm.com> Signed-off-by:
-
Anton Blanchard authored
POWER7 has the same PR/HV bit layout as POWER6, so set the flag. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
-
Frederic Weisbecker authored
The symbol resolving has of course revealed some bugs in the callchain tree handling. This patch fixes some of them, including: - inherit the children from the parents while splitting a node - fix list range moving - fix indexes setting in callchains - create a child on the current node if the path doesn't match in the existent children (was only done on the root) - compare using symbols when possible so that we can match a function using any ip inside by referring to its start address. The practical effects are: - remove double callchains - fix upside down or any random order of callchains - fix wrong paths - fix bad hits and percentage accounts Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1246419315-9968-4-git-send-email-fweisbec@gmail.com> Signed-off-by:
-
Frederic Weisbecker authored
This patch resolves the names, when possible, of each ip present in the callchains while using the -c option with perf report. Example: 5.40% [k] __d_lookup 5.37% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat sys_access system_call_fastpath 0x7fb609846f77 0.01% perf_callchain perf_counter_overflow intel_pmu_handle_irq perf_counter_nmi_handler notifier_call_chain atomic_notifier_call_chain notify_die do_nmi nmi do_lookup __link_path_walk path_walk do_path_lookup user_path_at sys_faccessat Signed-off-by: -
Frederic Weisbecker authored
Fix a confusion while giving the size of a callchain list during its allocation. We are using the wrong structure size. Signed-off-by:
-
Ingo Molnar authored
Merge reason: this branch was on a .30-ish base before, update it to an almost-.31-rc2 upstream base to pick up fixes. Signed-off-by: -
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Inform kmemleak about pid_hash kmemleak: Do not warn if an unknown object is freed kmemleak: Do not report new leaked objects if the scanning was stopped kmemleak: Slightly change the policy on newly allocated objects kmemleak: Do not trigger a scan when reading the debug/kmemleak file kmemleak: Simplify the reports logged by the scanning thread kmemleak: Enable task stacks scanning by default kmemleak: Allow the early log buffer to be configurable.
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm table: fix blk_stack_limits arg to use bytes not sectors dm exception store: really fix type lookup
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits) perf report: Add --symbols parameter perf report: Add --comms parameter perf report: Add --dsos parameter perf_counter tools: Adjust only prelinked symbol's addresses perf_counter: Provide a way to enable counters on exec perf_counter tools: Reduce perf stat measurement overhead/skew perf stat: Use percentages for scaling output perf_counter, x86: Update x86_pmu after WARN() perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run perf stat: Improve output perf stat: Fix multi-run stats perf stat: Add -n/--null option to run without counters perf_counter tools: Remove dead code perf_counter: Complete counter swap perf report: Print sorted callchains per histogram entries perf_counter tools: Prepare a small callchain framework perf record: Fix unhandled io return value perf_counter tools: Add alias for 'l1d' and 'l1i' perf-report: Add bare minimum PERF_EVENT_READ parsing perf-report: Add modes for inherited stats and no-samples ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Add Fenghua Yu as temporary co-maintainer for ia64 [IA64] address compiler warnings perfmon.c/salinfo.c [IA64] Remove unnecessary semicolons [IA64] sprintf should not be used with same source & destination address
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by:
-
Wolfgang Illmeyer authored
Maximum file size for hostfs mounts defaults to 2GB, so bigger files cannot be read/written through hostfs. This patch initializes the maximum file size to MAX_LFS_SIZE. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13531Signed-off-by:
Wolfgang Illmeyer <wolfgang@illmeyer.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
A crappy macro prevents us unlocking on a fail path. Expand the macro and unlock appropriatelly. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Frysinger authored
Make sure we do not actually request the RTC IRQ until the device driver is fully ready to handle and process any interrupt. This way a spurious interrupt won't crash the system (which may happen if the bootloader was poking the RTC right before booting Linux). Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Ville Syrjala authored
Block writes require 64 byte alignment. Since block writes could be used with SGRAM or WRAM also refine the memory type detection to check for either type before deciding to use the 64 byte alignment. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Tested-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Ville Syrjala authored
Apparently HP OmniBook 500's BIOS doesn't like the way atyfb reprograms the hardware. The BIOS will simply hang after a reboot. Fix the problem by restoring the hardware to it's original state on reboot. Signed-off-by:
-
Baruch Siach authored
IRQ handling is wrong for any GPIO >= PL061_GPIO_NR. Fix this by implementing and using a proper .to_irq method. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Baruch Siach authored
Note that IRQ has not been initialized when kmalloc() fails. Also, use DECLARE_BITMAP() to make the code clearer. Signed-off-by:
-
Yinghai Lu authored
Nathan reported that | commit 73d60b7f | Author: Yinghai Lu <yinghai@kernel.org> | Date: Tue Jun 16 15:33:00 2009 -0700 | | page-allocator: clear N_HIGH_MEMORY map before we set it again | | SRAT tables may contains nodes of very small size. The arch code may | decide to not activate such a node. However, currently the early boot | code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be | active although these nodes have no present pages. | | For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too unintentionally and incorrectly clears the cpuset.mems cgroup attribute on an i386 kvm guest, meaning that cpuset.mems can not be used. Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only. and need to do save/restore for that in find_zone_movable_pfn Reported-by:
Nathan Lynch <ntl@pobox.com> Tested-by:
Yinghai Lu <yinghai@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by:
-
Nikanth Karthikesan authored
By writing a tasks's pid to the file, a process adds that task to that cgroup/cpuset. But to add a cpu/mem to a cpuset, the new list of cpus should be written to the cpuset.mems file which would replace the old list of cpus. Make this clearer in the documentation. Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Richard Kennedy authored
balance_dirty_pages can overreact and move all of the dirty pages to writeback unnecessarily. balance_dirty_pages makes its decision to throttle based on the number of dirty plus writeback pages that are over the calculated limit,so it will continue to move pages even when there are plenty of pages in writeback and less than the threshold still dirty. This allows it to overshoot its limits and move all the dirty pages to writeback while waiting for the drives to catch up and empty the writeback list. A simple fio test easily demonstrates this problem. fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10 This is the simplest fix I could find, but I'm not entirely sure that it alone will be enough for all cases. But it certainly is an improvement on my desktop machine writing to 2 disks. Do we need something more for machines with large arrays where bdi_threshold * number_of_drives is greater than the dirty_ratio ? Signed-off-by:
Richard Kennedy <richard@rsk.demon.co.uk> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Renaud Lottiaux authored
The file opened in acct_on and freshly stored in the ns->bacct struct can be closed in acct_file_reopen by a concurrent call after we release acct_lock and before we call mntput(file->f_path.mnt). Record file->f_path.mnt in a local variable and use this variable only. Signed-off-by:
Renaud Lottiaux <renaud.lottiaux@kerlabs.com> Signed-off-by:
Louis Rilling <louis.rilling@kerlabs.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Joe Perches authored
Ion's cs.columbia.edu email address no longer works. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Ion Badulescu <ionut@badula.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Zhang Rui authored
When the 32-bit signed quantities get assigned to the u64 resource_size_t, they are incorrectly sign-extended. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13253 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9905Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Reported-by:
Leann Ogasawara <leann@ubuntu.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Reported-by: <pablomme@googlemail.com> Tested-by: <pablomme@googlemail.com> Cc: <stable@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
David Brownell authored
Bugfix to spi_bitbang infrastructure: make sure to always set transfer parameters on the first pass through the message's per-transfer loop. This can matter with drivers that replace the per-word or per-buffer transfer primitives, on busses with multiple SPI devices. Previously, this could have started messages using the settings left after previous messages. The problem was observed when a high speed chip (m25p80 type flash) was running very slowly because a low speed device (avr8 microcontroller) had previously used the bus. Similar faults could have driven the low speed device too fast, or used an unexpected word size. Acked-by:
Steven A. Falco <sfalco@harris.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Krzysztof Helt authored
Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by:
-
David Brownell authored
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by:
-
Thomas Gleixner authored
show_pools() walks the page_list of a pool w/o protection against the list modifications in alloc/free. Take pool->lock to avoid stomping into nirvana. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Bryan Donlan authored
ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to report errors to NFS properly. However, in ext[234]_lookup(), this -ESTALE can be propagated to userspace if the filesystem is corrupted such that a directory entry references a deleted inode. This leads to a misleading error message - "Stale NFS file handle" - and confusion on the part of the admin. The bug can be easily reproduced by creating a new filesystem, making a link to an unused inode using debugfs, then mounting and attempting to ls -l said link. This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE from ext2_iget(), as ext2 does for other filesystem metadata corruption; and also invokes the appropriate ext*_error functions when this case is detected. Signed-off-by:
Bryan Donlan <bdonlan@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
With ELF, at generating coredump, some more headers other than used vmas are added. When max_map_count == 65536, a core generated by following kinds of code can be unreadable because the number of ELF's program header is written in 16bit in Ehdr (please see elf.h) and the number overflows. == ... = mmap(); (munmap, mprotect, etc...) if (failed) abort(); == This can happen in mmap/munmap/mprotect/etc...which calls split_vma(). I think 65536 is not safe as _default_ and reduce it to 65530 is good for avoiding unexpected corrupted core. Anyway, max_map_count can be enlarged by sysctl if a user is brave.. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jakub Jelinek <jakub@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Yang Shi authored
Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory type for MPC85xx EDAC. Signed-off-by:
Yang Shi <yang.shi@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by:
-
Michael Buesch authored
Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: I/O ports at 0030 [size=8] Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 65 Region 0: I/O ports at 0020 [size=8] Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 65 Region 0: I/O ports at 0010 [size=8] Region 1: I/O ports at <unassigned> Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by:Michael Buesch <mb@bu3sch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
