- 20 Apr, 2006 14 commits
-
-
Ingo Molnar authored
- fix mddev_lock() usage bugs in md_attr_show() and md_attr_store(). [they did not anticipate the possibility of getting a signal] - remove mddev_lock_uninterruptible() [unused] Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
We don't have to #if guard prototypes. This also fixes a bug observed by Randy Dunlap due to a misspelled option in the #if. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
There was a report of a regression in the ALSA driver for the same hardware. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
Update the schedule for the removal of drivers depending on OBSOLETE_OSS_DRIVER as follows: - adjust OBSOLETE_OSS_DRIVER dependencie - from the release of 2.6.16 till the release of 2.6.17: approx. two months for users to report problems with the ALSA drivers for the same hardware - after the release of 2.6.17 (and before 2.6.18): remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without known regressions in the ALSA drivers for the same hardware Additionally, correct some OBSOLETE_OSS_DRIVER dependencies. A rationale of the changes is in http://lkml.org/lkml/2006/1/28/135Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Arnaud MAZIN authored
Add a test to detect the ICH7 based Core Duo SONY laptops (such as the SZ1) as type3 models. Signed-off-by: Arnaud MAZIN < arnaud.mazin@gmail.com> Acked-by: Stelian Pop <stelian@poppies.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jon Masters authored
This fixes a hang in mpu401_uart.c that can occur when the mpu401 interface is non-existent or otherwise doesn't respond to commands but we issue IO anyway. snd_mpu401_uart_cmd now returns an error code that is passed up the stack so that an open() will fail immediately in such cases. Eventually discovered after wine/cxoffice would constantly cause hard lockups on my desktop immediately after loading (emulating Windows too well). Turned out that I'd recently moved my sound cards around and using /dev/sequencer now talks to a sound card with a broken MPU. This second version changes -EFAULT to -EIO and frees open resources on error too. Test booted and seems to work ok. Signed-off-by: Jon Masters <jcm@jonmasters.org> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jean Delvare authored
Fix for bug #6395: Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume after the i2c-i801 driver has left the SMBus in PEC mode. The most simple fix is to clear the PEC bit after after every transaction. That's what this driver was doing up to 2.6.15 (inclusive). Thanks to Daniele Gaffuri for the very good report. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Johannes Goecke authored
On the MSI-K8T-NEO2 FIR ( Athlon-64, Socket 939 with VIA-K8T800- Chipset and onboard Sound,... ) the BIOS lets you choose "DISABLED" or "AUTO" for the On-Board Sound Device. If you add another PCI-Sound-Card the BIOS disables the on-board device. So far I have a Quirk, that does set the correspondent BIT in the PCI-registers to enable the soundcard. But how to ensure that the code is executed ONLY on excactly this kind of boards (not any other with similar Chipset)? Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Lee Revell <rlrevell@joe-job.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chris Zankel authored
Remove the dependence on the async_icount structure in the TIOCGICOUNT macro for Xtensa. (Thanks Russell and Adrian for pointing this out) Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Thayumanavar Sachithanantham authored
[PATCH] cs5535_gpio.c: call cdev_del() during module_exit to unmap kobject references and other cleanups During module unloading, cdev_del() must be called to unmap cdev related kobject references and other cleanups(such as inode->i_cdev being set to NULL) which prevents the OOPS upon subsequent loading, usage and unloading of modules(as seen in the mail thread http://marc.theaimsgroup.com/?l=linux-kernel&m=114533640609018&w=2). Also, remove unneeded test of gpio_base. Signed-off-by: Thayumanavar Sachithanantham <thayumk@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Darren Jenkins authored
WARNING: drivers/video/pm2fb.o - Section mismatch: reference to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd5d) WARNING: drivers/video/pm2fb.o - Section mismatch: reference to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd82) They are caused because pm2fb_set_par() uses lowhsync and lowvsync which are marked __devinitdata. Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Christoph Lameter authored
gather_stats() is called with a spinlock held from check_pte_range. We cannot reschedule with a lock held. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
Add myself as the IPMI maintainer. Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ananth N Mavinakayanahalli authored
In cases where a struct kretprobe's *_handler fields are non-NULL, it is possible to cause a system crash, due to the possibility of calls ending up in zombie functions. Documentation clearly states that unused *_handlers should be set to NULL, but kprobe users sometimes fail to do so. Fix it by setting the non-relevant fields of the struct kretprobe to NULL. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 19 Apr, 2006 26 commits
-
-
OGAWA Hirofumi authored
Those also break userland regs like following. 00000000 <sys_chown16>: 0: 0f b7 44 24 0c movzwl 0xc(%esp),%eax 5: 83 ca ff or $0xffffffff,%edx 8: 0f b7 4c 24 08 movzwl 0x8(%esp),%ecx d: 66 83 f8 ff cmp $0xffffffff,%ax 11: 0f 44 c2 cmove %edx,%eax 14: 66 83 f9 ff cmp $0xffffffff,%cx 18: 0f 45 d1 cmovne %ecx,%edx 1b: 89 44 24 0c mov %eax,0xc(%esp) 1f: 89 54 24 08 mov %edx,0x8(%esp) 23: e9 fc ff ff ff jmp 24 <sys_chown16+0x24> where the tailcall at the end overwrites the incoming stack-frame. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> [ I would _really_ like to have a way to tell gcc about calling conventions. The "prevent_tail_call()" macro is pretty ugly ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: make a function static IB/ipath: Fix whitespace IB/ipath: Make more names static IB/mad: Fix RMPP version check during agent registration IB/srp: Remove request from list when SCSI abort succeeds
-
Adrian Bunk authored
This patch makes the needlessly global mthca_update_rate() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
Make symbols that are only used in a single source file static. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Hal Rosenstock authored
Only check that RMPP version is not specified when MAD class does not support RMPP. Just because a class is allowed to use RMPP doesn't mean that rmpp_version needs to be set for the MAD agent to register. Checking this was a recent change which was too pedantic. Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
If a SCSI abort succeeds, then the aborted request should to be removed from the list of pending requests. This fixes list corruption after an abort occurs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: SUNRPC: Dead code in net/sunrpc/auth_gss/auth_gss.c NFS: remove needless check in nfs_opendir() NFS: nfs_show_stats; for_each_possible_cpu(), not NR_CPUS NFS: make 2 functions static NFS,SUNRPC: Fix compiler warnings if CONFIG_PROC_FS & CONFIG_SYSCTL are unset NFS: fix PROC_FS=n compile error VFS: Fix another open intent Oops RPCSEC_GSS: fix leak in krb5 code caused by superfluous kmalloc
-
Eric Sesterhenn authored
Hi, the coverity checker spotted that cred is always NULL when we jump to out_err ( there is just one case, when we fail to allocate the memory for cred ) This is Coverity ID #79 Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Carsten Otte authored
Local variable res was initialized to 0 - no check needed here. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
John Hawkes authored
Convert a for-loop that explicitly references "NR_CPUS" into the potentially more efficient for_each_possible_cpu() construct. Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Adrian Bunk authored
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Adrian Bunk authored
fs/built-in.o: In function `nfs_show_stats':inode.c:(.text+0x15481a): undefined reference to `rpc_print_iostats' net/built-in.o: In function `rpc_destroy_client': undefined reference to `rpc_free_iostats' net/built-in.o: In function `rpc_clone_client': undefined reference to `rpc_alloc_iostats' net/built-in.o: In function `rpc_new_client': undefined reference to `rpc_alloc_iostats' net/built-in.o: In function `xprt_release': undefined reference to `rpc_count_iostats' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If the call to nfs_intent_set_file() fails to open a file in nfs4_proc_create(), we should return an error. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
J. Bruce Fields authored
I was sloppy when generating a previous patch; I modified the callers of krb5_make_checksum() to allocate memory for the buffer where the result is returned, then forgot to modify krb5_make_checksum to stop allocating that memory itself. The result is a per-packet memory leak. This fixes the problem by removing the now-superfluous kmalloc(). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: fixup writeout path after ->map changes [PATCH] splice: offset fixes [PATCH] tee: link_pipe() must be careful when dropping one of the pipe locks [PATCH] splice: cleanup the SPLICE_F_NONBLOCK handling [PATCH] splice: close i_size truncate races on read
-
Antonino A. Daplas authored
Fix return code of fb_write(): If at least 1 byte was transferred to the device, return number of bytes, otherwise: - return -EFBIG - if file offset is past the maximum allowable offset or size is greater than framebuffer length - return -ENOSPC - if size is greater than framebuffer length - offset Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Fix modpost section mismatch warnings in savagefb driver: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Marking radeon_pci_register() as __devinit clears up all section mismatch warnings that are caused by radeon_pci_register() calling various __devinit function. Is there some reason not to do this? WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jean Delvare authored
Fix the following section mismatch: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
KAI.HSU authored
From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anatoli Antonovitch authored
Add support for the IDE device on ATI SB600 Signed-off-by: Felix Kuehling <fkuehlin@ati.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-